akron fans
Post on 01-Mar-2016
24 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
7/18/2019 Akron Fans
1/58
-
7/18/2019 Akron Fans
2/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
2
-
7/18/2019 Akron Fans
3/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
AKRONs ktar har funnits p marknaden sedan 1950-talet. Utvecklingen har lett fram till ett brett sortimentfr vitt skilda applikationer, frn ventilation av gruvoroch tunnlar till tork- och kylprocesser samt industri-och komfortventilation. Den hgt rationaliseradeproduktionsanlggningen ligger i Jrps i Lidkpingskommun.
AKRON r ISO 9001 certierat och din garant frkvalitet, exibilitet och prisvrda produkter. Katalogenvisar tekniska data fr AKRONs sortiment av ktarsamt fr ktarnas huvudkomponenter och tillbehr.
AKRONfrfogar ver effektiva berknings-program frdimensionering av ktar. Programmen r framtagnautifrn provresultat i egen tryckkammare, en avEuropas strsta fr prestandaprovning av ktar ochbestmning av ljudeffektniver. All konstruktion ochutveckling sker i 3-D CAD. P begran konstruerar ochtillverkar vi fr specika ndaml.
AKRONfans have been available on the market sincethe 1950s. Over the years a wide range of fan unitsfor very diverse applications have been developed,from mine and tunnel ventilation to drying and cooling
processes and also industrial and comfort ventilation.The highly rationalized production facilities aresituated in Jrps approximately 100km northeast ofGothenburg.
AKRONis accredited to ISO 9001 which is a guaranteefor high quality, exibility and cost efciency. This
catalogue includes technical data for the availableAKRON fan units and accessories.
AKRON has access to powerful calculation programsfor the dimensioning of fan units. The programs are aresult of extensive testing in our own pressure chamber,one of the largest in Europe for performance testing andnoise level measurement. All constructions are realizedin 3-D CAD. Customer specic constructions may bedeveloped on request.
3
Reverberation chamber Pressure Chamber
Nozzles
Flow straightener
Pressure regain
Outlet withadjustabledamper
-
7/18/2019 Akron Fans
4/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Garanti och leveransvillkor
Fr leveranser inom Norden tillmpar AB AKRON-maskiner Allmnna leveransbestmmelser frleveranser av maskiner, NL09. I enlighet med NL09
lmnas 12 mnaders garanti. Garantin gller underfrutsttning att:
-Godknd startutrustning anvnds
-Ingen verlast av komponenter sker
-Flkten monteras stabilt
-Flkten monteras med horisontell axel eller enligtutfrda lagerberkningar
-Motorn r rtt inkopplad av behrig elektriker
-Max varvtal ej verskrids
-Motor och kthjul hlls rena
-Eventuell frekvensomformare inte skapar spnnings-
transienter etc skadliga fr motorn
Warranty and terms of delivery
AB Akron complies with NL09 and Orgalime S2000,general conditions for the supply of machinery. Inaccordance a 12 month warranty is issued. The
warranty is valid given that:-Approved starting equipment is used
-No overloading of any component has occurred
-The fan unit is mounted in a stable manner
-The fan unit is mounted with horizontal shaft oraccording to bearing calculations
-The motor is installed correctly by a certied electrician
-Max. rotational speed is not exceeded
-Motor and impeller are kept clean
-Frequency converter, if used, does not create voltagetransients exceeding the motors tolerance limits
4
AKRON -maskiner med frn vnster lager, kontor,verkstad, mleri och ktlabb
AKRON (from left) warehouse, ofce, workshop,paintshop and fan laboratory
-
7/18/2019 Akron Fans
5/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Flktteori
Avvikande densitetRedovisade ktdiagram gller fr densitet 1,2kg/m,
dvs fr luft vid havsniv med temperatur 20C och relativfuktighet 50%. Flktens luftde och verkningsgradpverkas ej av avvikande densitet, dremot r tryckupp-sttning och effektbehov proportionella mot densiteten.
Anvnd tabellen nedan fr att korrigera fr avvikandedensitet. I frekommande fall mste korrektion grasfr bde hjd ver havet och fr temperatur.
Exempel: En kt skall ge 1100Pa vid arbete 900munder mark och vid temperaturen 0C. Korrektionfr niv respektive temperatur ger att densiteten rca 20% hgre n vad som gller i ktdiagrammet(1,114x1,073=1,195).
Sk allts i ktdiagrammet efter en kt som ger920Pa vid 1,2kg/m. Axeleffekten som erhlles urdiagrammet mste kas med 20% fr att motorn skallbli rtt dimensionerad.
Fan Theory
Density deviation
Diagrams in this catalogue are valid for an air density
of 1,2kg/m, i.e. at sea level, 20C and 50% relativehumidity. Air ow and fan efciency are not affected by
deviating density, however both pressure developmentand shaft power are proportional to the air density.
Use the table below to make corrections for deviatingdensity. It may be necessary to correct for bothtemperature and altitude
Example: The desired pressure from a fan is 1100Paat 900m below sea level and 0C. Correcting for altitudeand temperature gives that air density is approximately20% above normal conditions (1,114x1,073=1,195).
In the diagram, look for a fan that gives 920Pa at 1,2kg/m. Note that the shaft power given in the diagrammust be increased by 20% for the correct dimensioningof the motor.
KorrektionsfaktorCorrection factor 1,258 1,206 1,158 1,114 1,073 1,035 1,000 0,967 0,936 0,907 0,854 0,786 0,619 0,511
Temp. (C) -40 -30 -20 -10 0 10 20 30 40 50 70 100 200 300
Hjd / Altitude (m) -900 -600 -300 0 300 550 800 1250 1900 3600 5400
5
Flktlagar fr likformighet, varvtal
och densitetSambanden nedan visar hur effektbehovet, trycketoch volymdet pverkas vid frndringar av storlek,varvtal och densitet.
Likformighetslagarna visar hur storleken pverkarprestanda.
leken ger 8ggr s stort de, 4ggr tryck och32ggr effektbehov.
VarvtalslagarnaEx: En frdubbling av varvtalet ger 2ggr s stort
de, 4ggr tryck och 8ggr effektbehov.
DensitetslagarnaEx: En kning av densiteten med 20% ger 20%hgre tryckkning och 20% hgre effektbehov.Volymdet r oberoende av densiteten.
Genom kombination av lagarna fs uttryckentill hger.
Applikationer med extremt korta ktvingar
I fall dr det krvs stor motor samtidigt som kravet pliten diameter r dimensionerande blir berkningarna
fr luftdet och trycket ver kten mer avancerade.Fr detta ndaml har AKRON utvecklat speciellaberkningsmetoder.
Fan laws for uniformity, rotational
speed and density
The relations below show how shaft power, pressuredevelopment and volume ow depend on size, rotationalspeed and density.
The Uniformity laws show how the size affects theperformance.Ex: A by all means doubling of the size gives 8times the airow, 4 times the pressure and 32times the shaft power.
The Rotational Speed lawsEx: Doubling the rotational speed gives twice
the air ow, 4 times the pressure and 8 times theshaft power.
The Density laws
Ex: Increasing the density by 20% gives 20%higher pressure rise and 20% higher shaft power.
Air ow is not affected.
Combining all three laws leads to the expressionsto the left.
Applications with extremely short impeller blades
For cases where both great power and a demand forsmall diameter is requiered calculations become more
advanced. For this purpose AKRON has developedspecial calculation methods.
q
p D2
P D5
q n
p n2
P n3
p
P
q D3* n
p D2* n2*
P D5* n3*
-
7/18/2019 Akron Fans
6/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Tryckfrluster vid ktutloppI de ktdiagram dr ktens totaltryck visas r detdynamiska trycket berknat p utjmnad hastighets-prol ver ktens tvrsnittsyta. Omedelbart efter
kten eller omedelbart efter en diffusor monteraddirekt p ktutloppet r lufthastigheten emellertidojmn. Utjmnad hastighetsprol kan anses intrffaefter utjmningsstrckan LEenligt diagram.
Korrektionsfaktor A visar approximativt hur stor enfrlust som uppstr direkt efter kt- eller diffusorutloppblir, jmfrt med efter utjmnad hastighetsprol.
Ex:En utloppsfrlust som uppstr direkt efter ett 112cmkthjul med 40cm nav blir ca 17% hgre n om denuppstr efter en rak kanal.
Pressure losses at fan outlet
Wherever a fan units total pressure is shown in adiagram the dynamic pressure is calculated from aat velocity prole over the cross section. However,
immediately after a fan or after a diffuser mounted onthe fan outlet the air velocity is uneven. Flat velocity isapproximated to occur after an equalization distanceLE, according to diagram.
Correction factor A is an approximation of outletlosses at a fan or diffusor compared to outlet lossesafter a at velocity prole.
Ex. An outlet loss occurring directly after a 112cmdiameter impeller with 40cm hub will be about 17%greater than if it occurs after a straight duct.
Pressure transformation in diffusers
When air speed is decreased in a diffuser, pressure istransformed from dynamic to static. The transformationis most efcient at a distance from any disturbance like
a fan outlet. Dashed lines in following diagrams are fordiffuser conical withdiffuser insertion.
Loss factor B is the pressure loss in the diffuser aspart of the dynamic pressure in the diffuser inlet. Ifthe diffuser is attached directly to the fan outlet B isincreased: B
A=BxA.
Transformation factor Cis the fraction of the dynamicpressure at the diffuser inlet which is transformed tostatic pressure at the outlet. If the diffuser is attacheddirectly to a fan outlet Cis reduced: C
A=C-Bx(A-1).
Tryckomvandling i diffusorerVid uppbromsning i en diffusor omvandlas tryck frndynamiskt till statiskt. Omvandlingen r effektivastom diffusorn placeras p avstnd frn eventuell
strning, t.ex. ett ktutlopp. Streckade linjer i fljandediagramgller diffusor med konisk insats.
Frlustfaktor B anger tryckfrlusten i diffusorn somandel av dynamiska trycket i diffusorinloppet. Omdiffusorn r placerad direkt p ett ktutlopp skall Bkas:B
A=BxA.
Omvandlingsfaktor C visar hur stor andel av dyna-miska trycket i diffusorinloppet som omvandlats tillstatiskt tryck vid utloppet. Om diffusorn r placeraddirekt p ett ktutlopp skall Cminskas: C
A=C-Bx(A-1).
Korrektion fr hastighetsprofil
Correction for profile of velocity
,0
,
,
,3
,
,5
,3 ,4 ,5 ,6 ,7
av u an
Korr.fakt.A
orr.
act.
U j mningss r cka i rak kanal
Equaliza ion dis ance in s raigh duc
10 5 20 25 30 35u t ast g et r spee m s
LE(
antalkanaldia)
(numbero
ductdiameters)
6
-
7/18/2019 Akron Fans
7/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Exempel: En diffusor med insats och diametrarna1120 resp 1600mm samt lngden 1000mm r placerad
direkt p en kt med 40cm nav: A=1,17, B=0,23,C=0,52. Tryckfrlusten blir ca 27% (1,17x0,23=0,27) avingende dynamiskt tryck. Den statiska tryckkningenblir samtidigt ca 48% (0,52-0,23x(1,17-1)=0,48) avingende dynamiskt tryck.
Figurerna nedan visar hur stort tillgngligt tryckidentiska ktar, q=19,7m/s och p
t=1000Pa, ger
i ngra olika installationer. Notera att trycket efterutloppet kas markant med hjlp av diffusorn. Lggven mrke till att man, den frsta strckan efter kten,med frdel kan anvnda den mindre kanalen eftersomdiffusorn d fr bttre verkningsgrad.
Example:A 1000mm long diffuser with conical insertionwith diameters 1120 and 1600mm is attached directly
to a fan with a 40cm hub: A=1,17, B=0,23, C=0,52. Thepressure loss is approximately 27% (1,17x023=0,27),of the incoming dynamic pressure. The increase instatic pressure is about 48% (0,52-0,23x(1,17-1)=0,48)of the incoming dynamic pressure.
The picturesbelow show the available pressure fromidentical fans, q=19,7m3/s and p
t=1000Pa, in different
installations. Note the signicant increase in post outletpressure achieved by the diffuser. Also note that usingthe smaller duct directly after the fan improves theefciency of the diffuser.
Tryckfrlust ver diffusor
Pressure loss over diffuser
1,41
D2/D
1=
1,26
1,12
0,0
0,1
0,2
0,3
0,4
0 0,5 1 1,5 2L/D1
FrlustfaktorB
LossfactorB
Tryckomvandl. genom diffusor
Pressure transformation in a diffuser
D2/D1=
1,26
1,12
1,41
0,0
0,2
0,4
0,6
0 0,5 1 1,5 2L/D1
Omvandl.fakt.C
Transf.FactorC
Ex. A = 1,17 B = 0,23 pdf = 240 ptf = 1000 pd2= 60
pstat= ptf-A*pdf= 720pstat= ptf-A*B*pdf-pd2= 875
ptot= ptf-A*B*pdf= 935
pstat= ptf-B*pdf-pd2= 885
ptot= ptf-B*pdf= 945
pstat= ptf-A*B*pdf-A*pd2= 865
pstat= ptf-pdf= 760
ptot= ptf = 1000
LE
LE
LE
7
-
7/18/2019 Akron Fans
8/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
AkustikLjudeffekt (enhet Watt) i form av vibrationer tillfrsluften runt kten. Beroende p bl.a. avstnd frnkten, ktens placering samt omgivningens
ljudabsorption ger ljudeffekten upphov till olika storaljudtryck (enhet Pascal). Ljudtrycket anger storlekenp de svngningar som stter t.ex. trumhinnan i rrelse.Ljudeffekten och ljudtrycket presenteras oftast somlogaritmiska vrden, de kallas d ljudeffektniv (L
w)
respektiveljudtrycksniv (Lp),bda har enheten dB.
Accoustics
Sound power (unit Watts) in the form of audible airvibrations is caused by the fan. Depending on thedistance to the fan unit and the sound absorption by
the environment, sound power causes sound pressure(unit Pascal) around the fan. Sound pressure relatesto the amplitude of the oscilations making the eardrumvibrate. Sound power level (L
W)
and sound pressure
level (LP)are values in the unit dB.
Berkning av ljudniv. Ljudnivn berknas genomatt omvandla ljudeffektniv till ljudtrycksniv ochsedan justera med A-ltret. Skillnaden mellan L
woch
Lp, L utlses ur diagrammet nedan. A-ltret dras
ifrn i varje oktavband varefter oktavbandsvrdenafrn 125-8000 Hz summeras logaritmiskt (L
p= 10xlog
[100,1xLp125+100,1xLp250 +...+100,1xLp8k]) 63Hz-bandetbehver ej ing i berkningen.
Berkning med ljuddmpare. ljuddmpare har olikadmpningsfrmga beroende p storlek, materialoch konstruktion. Dmpningen r olika i de olikafrekvensbanden precis som A-ltret. Denna dmpningdras ifrn i varje oktavband innan den logaritmiskasummeringen grs.
Sound level calculation. The sound level is calculatedby converting sound power level to sound pressure leveland then applying the A-lter. The difference betweensound power and pressure levels, L, is read from thediagram below. Reduce the sound pressure level ineach octave band with the corresponding attenuation of
the A-lter and calculate the sound level by logarithmic
summation (Lp= 10xlog [100,1xLp125+100,1xLp250 +...+
100,1xLp8k]). Note that the 63Hz range does not need tobe included in the calculation.
Calculation with a silencer. A silencers ability toreduce noise depends on size, material and theconstruction. The attenuation is also different in eachoctave band. Reduce the sound power level with theattenuation of the silencer before calculating the soundlevel by logarithmic summation.
A-ltret. Det mnskliga rat fungerar bra runt 2000Hz men har begrnsad knslighet fr bde hgre ochlgre frekvenser. Vid berkningar efterliknar man ratgenom att lta ljudet ltreras, vanligen med ett A-lter.Det vrde som erhlls d ljudtrycksnivn justeras med
A-ltret kallas ljudniv(LpA) med enhet dB(A).
The A-lter. The human ear is specialised in amplifyingfrequencies around 2000Hz, for higher and lowerfrequencies it becomes less sensitive. The A-lter isa mathematical ear replica. A ltered sound pressurelevel is called sound level (L
pA), unit dB(A).
Dmpning fr A-lter /A-lter reduction
Frekvens / Frequency(Hz) 63 125 250 500 1k 2k 4k 8k
Dmpning / Reduction (dB) -26 -16 -9 -3 0 +1 +1 -1
8
Ljudredovisning i ktdiagram. Ljudmtningar i
Akrons laboratorium grs i enlighet med ISO 3741. Idiagrammen presenteras alstrad total ljudeffektnivL
wtot (dB) utan avdrag fr A-lter. Korrektionsfaktorer
fr oktavbandsuppdelning presenteras i tabeller viddiagrammen.
Presentation of fan noise in diagrams. Noise
measurements in Akrons laboratory are according toISO 3741. In the diagrams the total generated soundpower level L
Wtot (dB) is presented without A-lter
reduction. Correction factors for conversion to octavebands can be found in tables by the diagrams.
-
7/18/2019 Akron Fans
9/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Spread factor Qshows the concentration of the sounddistribution. When Q=1 there are no obstacles andsound is spread spherical in all directions. If the source
is placed on a surface, half the sphere is obstructedand Q=1/2.
Equivalent absorption area Ais the sum of the partialsurfaces of the room multiplied with the correspondingabsorption factors . varies from entirely reecting 0to entirely absorbing 1. The right part of the diagrambelow is used to estimate A.
Utbredningsfaktor Q anger hur koncentreradspridningen av ljudet r. Finns inga hinder och ljudetsprids helt sfriskt r Q=1, men sitter kllan p en vgg
sprids ljudet bara i en halv sfr, Q=1/2, osv.Ekvivalent absorptionsarea Ar summan av rummetsdelytor multiplicerat med respektive absorptionsfaktor. En helt reekterande yta har =0 medan =1 r heltabsorberande. A kan uppskattas till hger i diagrammetnedan.
Ex: En ljudklla, Lwtot
=100dB, Kok
=-19,-12,-9,-8,-6,-6,-10,-17, sitter i vinkeln mellan tak och 2 vggar. Ljudetutbreder sig d i en -sfr frn kllan. Lokalen r 300mmed vldmpade ytor. Bestm ljudnivn i en punkt 5mfrn ljudkllan.
Till hger i diagrammet bestms rummets ekvivalenta
aborptionsarea till 200m. Till vnster i diagrammetgr man sedan i tur och ordning in med avstndet 5m,utbredningsfaktorn och ekvivalent absorbtionsarean200m och avlser L till 15dB. Ljudtrycksnivn blir 100-15=85 dB. Dela med hjlp av K
ok, upp 85dB i oktavband
och lgg p A-ltret. Summera slutligen alla oktavbandlogaritmisk, i detta fallet blir ljudnivn 84 dB(A).
Ex.A sound source with Lwtot
=100dB, Kok
=-19,-12,-9,-8,-6,-6,-10,-17, is placed in the corner between the ceilingand two walls. The sound is spread in a quarter () of asphere from the source. The room is 300 m with highlyabsorbing surfaces. Determine the sound level in a spot5 m from the source.
The equivalent absorption area is determined to 200mto the right in the diagram. To the left in the diagram, inturn enter distance 5m, spread factor and equivalentabsorbtion area 200m and read L=15dB. The soundpressure level is 100-15=85 dB. Use K
ok to split the
sound pressure level into octaves and then addthe A-lter. Calculate the sound level by logarithmicsummation of each octave band. The sound level is 84dB(A) in this case.
9
-
7/18/2019 Akron Fans
10/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Seriekoppling av ktarVid behov av hgre tryck n vad som kan stadkommasmed en enda kt kan man seriekoppla tv eller erktar. Hela luftdet passerar d i tur och ordning
varje ktsteg och man kan tillgodorkna sig varjehjuls tryckkning. Fr att erhlla det dimensionerandetrycket per steg delas hela det erforderliga totaltrycket(inkl. dynamiskt) lika mellan alla ingende steg. Varjesteg drivs alltid av separat motor.
Tvstegsktar med kontrarotationAKDAKD- serien tcker diametrar 310-1250 mm. AKD bestrav tv mot varandra vnda ktar med kontraroterandekt-hjul. Flkthjulens utformning och position r
berknat och testat individuellt fr varje storlek froptimal samverkan och effektivitet.
Fr kapaciteter: se kata- logavsnitt fr AKD.
Serial mounting of fan unitsWhen pressure demands are higher than what can beaccomplished with a single stage fan unit, two or morefans may be installed in a series. The entire airow will
pass each stage and the pressure development of eachseparate impeller can be accounted for. To obtain thedimensioning pressure per stage the total pressure(including dynamic) is split evenly between the stages.Each stage is always driven by a separate motor.
Counter rotating two stage fans
AKD
The AKD- series covers diameters 310 -1250 mm. TheAKD consists of two fan units with counter rotatingimpellers facing each other. Angles and positions of
the impellers are calculated and tested for each sizeindividually for optimal cooperation and efciency.
For capacities: see catalogue section for AKD.
Flerstegsktar med en rotations-riktningFr ktar med strre diametrar n 1250 r inte AKDutfrandet tillgngligt, istllet anvnds tv lika PFKHD-ktar i serie, dessa skall ha ledskenor som rtar uppdet. Det kan byggas p er steg n tv fr att n rtttryck.
Denna typ av ktar dimensioneras alltid individuelltfr varje projekt.
Multiple fans with a single rotational
direction
For fans larger than diameter 1250 the AKD is notavailable. Two or more similar fan units with guidevanes following each impeller may then be connectedafter another.
This type of fan unit is always dimensioned for thespecic project.
10
-
7/18/2019 Akron Fans
11/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Startmetoder ochvarvtalsreglering
StartmetoderDirektstart: Billig och enkel - startstrmmen r 6-8ggr mrkstrmmen vilket kan frorsaka ntstrnings-problem. Sm kortslutna motorer, normalt upp t.o.m.4,0 kW, startas ofta med direktstart. Vid eget nt kanbetydligt strre effekter direktstartas.
Startapparater fr direktstart til lverkas av AKRON.
Y/D-start: Med Y-koppling minskar startstrmmen tillca 30% jmfrt med direktstart och startmomentetreduceras till ca 25%. Allt fr lga startmomentger lnga startfrlopp och kan frorsaka avsevrdmotoruppvrmning. Vid offentligt nt anvnder mannormalt Y/D-start fr motorer frn och med 5,5 kW.
Automatisk Y/D-start fr en- och erstegsktartillverkas av AKRON.
Elektronisk mjukstart: Mjukstart ger lg startstrmoch mjlighet att anpassa startmomentet efter behov.Stora motorer kan drfr startas i nt med begrnsadkapacitet. Mjukstarten kan spara energi medfaskompenserande spnningsminskning och orsakaringa moment- eller strmtransienter.
Frekvensomriktare: r ofta den bsta startmetoden,
i synnerhet om man vill varvtalsreglera kten efteruppstart.
Starting and speed control
Starting methods
Direct on line, DOL: Inexpensive and simple, startingcurrent is 6-8 times greater than the motor rating whichmay cause disturbance in the mains. Small motors,normally up to 4,0 kW, are commonly DOL started.Considerably larger motors can be DOL started ifconnected to a private net.
DOL starters are manufactured by AKRON.
Star-Delta S/D-start:When starting a star connectedmotor the starting current is reduced to about 30%compared to DOL and the starting torque is reduced toabout 25%. Too low starting torque prolong the starting
time and may lead to excessive heating of the motor. Inpublic nets it is common to use S/D-starters on motorsfrom 5,5 kW and up.
Automatic S/D-starters for single and multistage fansare manufactured by AKRON.
Electronic soft start:A soft starter uses a low startingcurrent and offers a possibility to adapt the startingtorque to demand. Hence large motors can be startedon a power supply net with limited capacity. Soft startingis energy efcient and does not cause any torque- orcurrent transients.
Frequency converter: The superior starting method,especially if it is desirable to control fan speed afterstart-up.
VarvtalsregleringTvhastighetsmotorernns i utfrande med separatastatorlindningar, var och en med olika poltal, samt iutfrande med en enda uppsttning lindningar dr manvljer mellan helt och halvt poltal, s.k. Dahlanderkoppladmotor. Fr ktdrift kan alltid tvhastighetsmotormed lgre vridmoment vid det lgre varvtalet vljas.Byte av poltal sker genom polomkoppling i ktens
startapparat.Frekvensreglering r vanligen det bsta sttet attvarvtalsreglera och starta en kt. Frdelarna medfrekvensomriktaren r bl.a. att energibesparingen blir storvid lga varvtal. Under 20 Hz kan dock kylningsproblem,och under 10 Hz kan magnetiseringsproblem somger hackig drift uppst. Exakt frekvens d sdanaproblem uppstr skiljer mellan olika motorer ochfrekvensomriktare. Frekvensomriktare kan behvakompletteras med lter fr att ej ge upphov till strningarp ntet och eventuellt ven ett bromsmotstnd fr attskydda omriktaren mot retardationskrafter.
Vid frekvensreglering br motorns lindningar frsesmed termokontakter eller termistor fr att undvikaverhettning.
Speed control
Two speed motors are available with separate statorwindings, each with different number of poles or withone set of stator windings where all or half of the polescan be used, a so called Dahlander motor. A two speedmotor with low torque at the lower speed is alwayssuitable for driving a fan. Switching numbers of poles isdone in the fan units starter equipment.
Frequency control is generally the best method ofspeed control and start up of a fan. Benets includelarge energy savings at lower speeds. Cooling problemsmay occur below 20 Hz and magnetization problemsbelow 10 Hz. Exact frequencies where such problemsoccur differ between motors and frequency converters.Frequency converters may need to be tted with a lternot to cause disturbance in the mains and/or a brakingresistance to protect the converter from retardationalforces.
When using a frequency-converter the motor windingsshould be tted with thermo contacts or thermistors to
prevent overheating.
11
-
7/18/2019 Akron Fans
12/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
AK - Axialktar frkanalmontage
AKRONs axialkt fr kanalmontage, AK, passar ide esta industriapplikationer. AK kan monteras motkanalsystem med samma diameter eller, med hjlpav adapter, mot annan diameter. Alternativt kan AKmonteras mot vgg, d lmpligen tillsammans medkvadratisk montageram (tillbehr).
AK-chassit erbjuds i antingen 100% galvaniserat, typglv, eller i 100% rostfritt utfrande, typ stl.
AK levereras med valfritt AKRON axialkthjul, antingenhelgjutet eller justerbart. Flkthjul med justerbaravingar nns fr bde en luftriktning, typ PFJ1 och frreverserande riktning typ PFJ2.
AK-kten kan monteras med valfri luftriktning; MF(Motor-Flkthjul) eller FM (Flkthjul-Motor). MF rhuvudalternativ eftersom kthjulet d med hjlp avmotorbryggan arbetar med bsta verkningsgrad. Viddetta utfrande kan kten dessutom frses medledskeneapparat (tillbehr) p utloppet fr ytterligarehjning av verkningsgraden. MF ger ven bttrekylning av motorn; motor utan egen kylkt kan oftastanvndas i detta fall.
Till AK nns en rad tillbehr ssom inloppsdysor,utloppsdiffusorer, ledskeneapparater, ljuddmpare etc.
Eventuellt berringsskydd fr in- eller utloppssidar tillbehr. Berringsskydd mste nnas om kteninstalleras p ett stt som gr de rrliga delarna
tkomliga.
AK - Axial ow fan units for
duct mountAKRONs axial fan unit AK is suitable for most industrialapplications. The AK can be tted to ductworks with thesame diameter or, with an adaptor, to other diameters.
Alternatively, the AK may be mounted on a wall, thentogether with a square mounting frame (accessory).
The AK casing is offered in either 100% galvanizedmaterials, type glv, or in 100% stainless steel, type stl.
AK comes with any of AKRONs axial impellers, eithersolid cast or adjustable. Impellers with adjustable wingsare available for either single direction of air, type PFJ1or for reversible directions type PFJ2.
The AK fan unit can optionally be mounted with airdirection MF (Motor-Fan) or with FM (Fan-Motor). MF
is the main option since the impeller then, with helpfrom the motor bracket, works with the best efciency.In this case it is also possible to mount guide vanes(accessory) at the fan outlet, which will additionallyincrease the efciency. MF also provides better coolingof the motor, a motor without its own cooling fan canoften be used in this case.
There are a number of accessories for the AK, such asinlet nozzles, outlet diffusers, guide vanes, silencers,etc.
Any wire guard for the in- or outlet side is an accessory.A wire guard must be tted if the fan unit is installed in a
way that makes the moving parts accessible.
AK med inloppsdysa och stdftter med vibrationsdmpare
AK with inlet nozzle and support feet + vibration absorbers
AK kt med berringsskydd
AK fan unit with wire guard
12
-
7/18/2019 Akron Fans
13/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Mttskiss / Dimensional drawing
StorlekSize
Amm
Bmm
Cmm
nD Dmm
Hminmm
Hmaxmm
Lmm
KImm
KLmm
tmm
m*kg
031 315 355 397 8 12 63 80 325 74 -76 2 9,7
035 350 395 430 8 12 63 90 375 81 -95 2 11
040 400 450 500 8 12 63 90 325 75 -41,5 2 12
050 500 560 600 12 12 71 112 325 140 50 2 20
056 560 620 660 12 12 71 132 410 140 42 2 26
060 600 656 700 8 12 71 132 410 140 42 2 28
063 630 690 730 12 12 71 132 410 140 42 2 29
071 710 770 810 16 12 80 132 410 140 42 3 32
080 800 860 900 16 12 80 132 410 190 92 3 38
090 900 970 1000 16 14,5 100 160 535 190 50 3 52
100 1000 1070 1100 16 14,5 100 160 535 190 50 3 60
112 1120 1190 1220 20 14,5 112 180 660 250 22 3 80
125 1250 1320 1350 20 14,5 132 200 660 250 107 3 93
140 1400 1470 1500 20 14,5 160 250 914 250 -160 4 141
160 1600 1680 1720 24 18,5 160 280 894 250 -140 4 162
Flktchassi / Fan casing
StorlekSize
Emm
Fmm
Gmm
Imm
Jmm
mkg
050 480 440 30 329 11 2
056 480 440 30 361 11 2
060 480 440 30 382 11 2
063 480 440 30 398 11 2
071 810 750 30 448 13 5
080 810 750 30 497 13 5
090 810 750 30 556 13 5
100 810 750 30 610 13 5
112 950 900 40 640 18 9
125 950 900 40 710 18 9
140 950 900 40 788 18 9
160 950 900 40 892 18 9
Stdfot / Support foot * Vikt avser chassi exklusive motor och kthjul* Weight is casing excluding motor and impeller
13
-
7/18/2019 Akron Fans
14/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Tillbehr
Tillbehr bestlles alltid separat inkl specikation avmaterial. Tillbehr som avses placeras p dysanseller diffusorns stornde vljs en storlek strre nktchassi:
Stdftter LedskenekransRam SpiroanslutningBerringsskydd DiffusorInloppsdysa FrlngningscylinderMotns
Observera:
Standard trefasmotor, D230/Y400 t.o.m. 4 kW ochD400/Y690 fr.o.m. 5,5kW.
Om kten ej avses installeras otkomligt i CE-mrktapparat skall berringsskydd bestllas separat.
Accessories
Accessories are always ordered separately includingspecication of materials. Accessories placed on inletnozzle or large side of diffuser should be chosen onesize larger than fan casing:
Support feet Guide vanes Frame Connection spigotWire guard DiffuserInlet nozzle Extension cylinderFlange
Please observe:
Standard 3-phase motor D230/Y400 up to andincluding 4 kW and D400/Y690 from 5,5kW.
If the fan unit is not intended to be mounted out of reach in a CE marked application, a wire guard
should be ordered separately.
14
Specication
Flkt / FanAK - aaa - bbb - ccccccc - dd,d / ep f/f t
Storlek / Size Nom. diameter cm aaa = 031 .. 160
Material / Materials Varmgalv/ Hot dip galvanised bbb = glv Rostfritt / Stainless steel bbb = stl
Flkthjul / Impeller Helgjutet / Solid cast c1 = H c2-5 = 0500 .. 1271 (se diagram / see diagram) Axelhl /Shaft hole c6-7 = 19.. 75
Justerbart /Adjustable c1-2 = J1 eller / or J2 Nav /Hub 28L c3 = 2 40L c3 = 4 40F c3 = 5
56L c3 = 6 56F c3 = 7 76 c3 = 8 Ant vingar /No of blades 6 c4 = 3 12 c4 = 6 Axelhl /Shaft hole c5-6 = 19.. 75
Motoreffekt kW / Motor rating kW dd,d = 0,25 .. 90,0
Poltal / No. of poles e = 2, 4, 6 eller / or8
Spnning / Voltage 240/400V f/f = 2/4 400/690V 4/6
Termokontakt (-er) / Thermo contact (-s) t eller/or blank
Extra information Additional informationLuftriktning Direction of airow: Ange MF eller FM fr luftriktning Motor-Flkthjul eller Indicate MF or FM for airow direction Motor-Fan or
Flkthjul-Motor. Fan-Motor.
Vingvinkel vid PFJ1 och PFJ2 Pitch angle for PFJ1 and PFJ2 Optimeras frn fall till fall Optimized to t requested performance
-
7/18/2019 Akron Fans
15/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
AB - Korta axialktar frkanalmontage
AKRONs axialkt fr kanalmontage, AB, passar ide esta industriapplikationer. AB-ktens utlopp kanmonteras mot kanalsystem med samma diameter eller,med hjlp av adapter, mot annan diameter. Alternativtkan AB monteras mot vgg, d lmpligen tillsammansmed kvadratisk montageram (tillbehr). AB-chassitr kortare n motsvarande AK-chassi; Eftersomktens tyngdpunkt ligger nrmre infstningsnsenblir pfrestningarna vid bultfrbanden ptagligtreducerade.
AB-chassit erbjuds i 100% galvaniserat utfrande, typglv.
AB levereras med valfritt AKRON axialkthjul, antingenhelgjutet eller justerbart, typ PFJ1.
AB-kten r konstruerad fr luftriktning MF (Motor-Flkthjul). Dels r den ena anslutningsnsen dysformadoch dels arbetar kthjulet, med hjlp av motorbryggan,med bsta verkningsgrad vid denna luftriktning. Flktenkan frses med ledskeneapparat (tillbehr) p utloppetfr ytterligare hjning av verkningsgraden.
Till AB nns en rad tillbehr ssom utloppsdiffusorer,ledskeneapparater, ljuddmpare etc.
Eventuellt berringsskydd fr in- eller utloppssidar tillbehr. Berringsskydd mste nnas om kteninstalleras p ett stt som gr de rrliga delarnatkomliga.
AB Short axial ow fan units
for duct mountAKRONs axial fan unit AB is suitable for most industrial
applications. The outlet of the AB can be tted toductworks with the same diameter or, with an adapter,to other diameters. Alternatively, AB may be mountedon a wall, then together with a square mountingframe (accessory). The AB casing is shorter than thecorresponding AK casing; Due to the fans centre ofgravity being closer to the mounting ange the stresseson the mounting bolts are signicantly reduced
The AB casing is offered in 100% galvanized materials,type glv.
AB comes with any of AKRONs axial impellers, eithersolid cast or adjustable, type PFJ1.
The AB is constructed for air direction MF (Motor-Fan).Firstly one of the mounting anges is formed to anozzle and secondly the impeller, with help from themotor bracket, achieves the best efciency with thisair ow direction. The fan unit may be tted with guidevanes (accessory) at the outlet, which will additionallyincrease the efciency.
There are a number of accessories for the AB, such asinlet nozzle, outlet diffuser, guide vanes, silencers, etc.
Any wire guard for in- or outlet side is an accessory. Awire guard must be tted if the fan unit is installed in away that makes the moving parts accessible.
15
-
7/18/2019 Akron Fans
16/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Flktchassi / Fan casing
StorlekSize
Amm
Bmm
Cmm
nD Dmm
Hminmm
Hmaxmm
Lmm
tmm
m*kg
080 800 860 900 16 12 80 132 419 3 37
090 900 970 1000 16 14,5 100 160 419 3 45
100 1000 1070 1100 16 14,5 100 160 419 3 50
112 1120 1190 1220 20 14,5 112 180 544 3 56125 1250 1320 1350 20 14,5 132 200 545 3 80 / 99**
StorlekSize
Emm
Fmm
Gmm
Imm
Jmm
mkg
080 810 750 30 497 13 5
090 810 750 30 556 13 5
100 810 750 30 610 13 5
112 950 900 40 640 18 9
125 950 900 40 710 18 9
Stdfot / Support foot
Mttskiss / Dimensional drawing
* Vikt avser chassi exklusive motor och kthjul** Frstrkt fr motorstorlek 200* Weight is casing excluding motor and impeller** Reinforced for motors of size 200
16
-
7/18/2019 Akron Fans
17/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
17
Specication
Flkt / FanAB - aaa - bbb - ccccccc - dd,d / ep f/f t
Storlek / Size Nom. diameter cm aaa = 080 .. 125
Material / Materials Varmgalv/ Hot dip galvanised bbb = glvFlkthjul / Impeller Helgjutet / Solid cast c1 = H c2-5 = 0800 .. 1271 (se diagram / see diagram) Axelhl /Shaft hole c6-7 = 19.. 55
Justerbart /Adjustable c1-2 = J1Nav /Hub 28L c3 = 2
40L c3 = 4 40F c3 = 5 56L c3 = 6
56F c3 = 7 Ant vingar /No of blades 6 c4 = 3 12 c4 = 6 Axelhl /Shaft hole c5-6 = 19.. 55
Motoreffekt kW / Motor rating kW dd,d = 0,25 .. 30,0
Poltal / No. of poles e = 2, 4, 6 eller / or8
Spnning / Voltage 240/400V f/f = 2/4 400/690V 4/6
Termokontakt (-er) / Thermo contact (-s) t eller/or blank
Extra information Additional informationLuftriktning Direction of airow:
Ange MF eller FM fr luftriktning Motor-Flkthjul eller Indicate MF or FM for airow direction Motor-Fan orFlkthjul-Motor. Fan-Motor.
Vingvinkel vid PFJ1 och PFJ2 Pitch angle for PFJ1 and PFJ2 Optimeras frn fall till fall Optimized to t requested performance
Tillbehr
Tillbehr bestlles alltid separat inkl specikation avmaterial. Tillbehr som avses placeras p dysanseller diffusorns stornde vljs en storlek strre n
ktchassi:Stdftter LedskenekransRam SpiroanslutningBerringsskydd DiffusorInloppsdysa FrlngningscylinderMotns
Observera:Standard trefasmotor, D230/Y400 t.o.m. 4 kW och
D400/Y690 fr.o.m. 5,5kW.
Om kten ej avses installeras otkomligt i CE-mrktapparat skall berringsskydd bestllas separat.
Accessories
Accessories are always ordered separately includingspecication of materials. Accessories placed on inletnozzle or large side of diffuser should be chosen one
size larger than fan casing: Support feet Guide vanes Frame Connection spigotWire guard DiffuserInlet nozzle Extension cylinderFlange
Please observe: Standard 3-phase motor D230/Y400 up to and
including 4 kW and D400/Y690 from 5,5kW.
If the fan unit is not intended to be mounted out of reach in a CE marked application, a wire guard
should be ordered separately.
-
7/18/2019 Akron Fans
18/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
ACR - Axialktar fr vgg- ellermodulmontage
AKRONs axialkt ACR fr vgg- eller modulmontage,dr era ktar monteras parallellt, r avsedd frmiljer dr utkat korrosionsskydd krvs. ACR haren kraftig integrerad kvadratisk montageram medinfstningspunkter runtom p yttersidor och framsida.
ACR-chassit erbjuds i 100% rostfritt utfrande, typ stl.
ACR levereras med valfritt AKRON axialkthjul,antingen helgjutet eller justerbart. Flkthjul medjusterbara vingar nns fr bde en luftriktning, typ PFJ1och fr reverserande riktning typ PFJ2.
ACR r konstruerat att kunna arbeta optimalt bdemed en luftriktning och reverserande; placeringen avkthjulet i ktomfattningen r olika. I fall med ickereverserande luftriktning kan ACR-kten antingenmonteras fr luftriktning MF (Motor-Flkthjul) ellerFM (Flkthjul-Motor). MF r huvudalternativ eftersomkthjulet d med hjlp av motorbryggan arbetar medbsta verkningsgrad. MF ger ven bttre kylning avmotorn; motor utan egen kylkt kan oftast anvndasi detta fall.
Eventuellt berringsskydd fr in- eller utloppssidar tillbehr. Berringsskydd mste nnas om kteninstalleras p ett stt som gr de rrliga delarnatkomliga.
ACR - Axial ow fan units for
wall or modular mountAKRONs axial fan unit ACR for wall or modularmounting, where a number of units are mounted inparallel, is designed for environments where enhancedcorrosion protection is required. ACR has a strongintegrated square mounting frame with attachment
points around the outer sides and on the front.
The ACR casing is offered in 100% stainless steel, typestl.
ACR comes with any of AKRONs axial impellers, eithersolid cast or adjustable. Impellers with adjustable wingsare available for either single direction of air, type PFJ1
or for reversible directions type PFJ2.
ACR is designed to operate optimally with both singledirection of air and reversing; the position of the impellerin the casing differs. In cases with single direction of airthe ACR fan unit can, again, be optionally mounted;Either for direction MF (Motor-Fan) or FM (Fan-Motor)where MF is the main option since the impeller then,with help from the motor bracket, works at the bestefciency. MF also provides better cooling of the motor,a motor without its own cooling fan can often be usedin this case.
Any wire guard for in- or outlet side is an accessory. A
wire guard must be tted if the fan unit is installed in away that makes the moving parts accessible.
18
-
7/18/2019 Akron Fans
19/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
StorlekSize
Amm
Bmm
Cmm
nD Dmm
Hminmm
Hmaxmm
Imm
Jmm
Rmm
tmm
m*kg
050 500 560 600 12 12 71 112 30 142 625 3 22
056 560 620 660 12 12 71 132 30 158 685 3 25
063 630 690 730 12 12 71 132 30 175 755 3 27
071 710 770 810 16 12 80 132 30 240 835 3 30
080 800 860 900 16 12 80 132 30 268 925 3 43
090 900 970 1000 16 12 100 160 30 297 1025 3 52
100 1000 1070 1100 16 12 100 160 30 340 1125 3 58
112 1120 1190 1220 20 12 112 180 30 335 1270 3 70
125 1250 1320 1350 20 12 132 200 30 370 1400 3 80
140 1400 1470 1500 20 12 160 250 30 411 1550 4 100
160 1600 1680 1720 24 12 160 280 30 523 1750 4 113
Mttskiss / Dimensional drawing
Flktchassi / Fan casing
* Vikt avser chassi exklusive motor och kthjul* Weight is casing excluding motor and impeller
StorlekSize
Kmm
Lmm
LAmm
Mmm
Nmm
Omm
050 50 140 192 0 175 50
056 50 140 253 0 195 50
063 50 140 253 0 215 50
071 50 140 254 0 245 50
080 50 180 254 0 275 50
090 50 180 354 0 310 50
100 50 180 365 0 350 50
112 100 225 391 60 350 50
125 100 225 434 60 400 50
140 100 225 524 60 450 50
160 100 225 614 60 500 50
19
-
7/18/2019 Akron Fans
20/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Tillbehr
Tillbehr bestlles alltid separat inkl specikation avmaterial.
Berringsskydd SKF WT-lager, fr omgivande temperatur -40 till +65 C
Observera:
Standard trefasmotor, D230/Y400 t.o.m. 4 kW ochD400/Y690 fr.o.m. 5,5kW.
Om kten ej avses installeras otkomligt i CE-mrktapparat skall berringsskydd bestllas separat.
Accessories
Accessories are always ordered separately includingspecication of materials.
Wire guard SKF WT-bearings, for ambient temperatures - 40 to +65 C
Please observe:
Standard 3-phase motor D230/Y400 up to andincluding 4 kW and D400/Y690 from 5,5kW.
If the fan unit is not intended to be mounted out of reach in a CE marked application, a wire guard
should be ordered separately.
20
Specication
Flkt / FanACR - aaa - bbb - ccccccc - dd,d / ep f/f t
Storlek / Size Nom. diameter cm aaa = 050 .. 160
Material / Materials Rostfritt/ Stainless steel bbb = stlFlkthjul / Impeller Helgjutet / Solid cast c1 = H c2-5 = 0500 .. 1271 (se diagram / see diagram) Axelhl /Shaft hole c6-7 = 19.. 75
Justerbart /Adjustable c1-2 = J1 eller / or J2 Nav /Hub 28L c3 = 2 40L c3 = 4 40F c3 = 5 56L c3 = 6
56F c3 = 7 Ant vingar /No of blades 6 c4 = 3 12 c4 = 6 Axelhl /Shaft hole c5-6 = 19.. 75
Motoreffekt kW / Motor rating kW dd,d = 0,25 .. 90,0
Poltal / No. of poles e = 2, 4, 6 eller / or8
Spnning / Voltage 240/400V f/f = 2/4 400/690V 4/6
Termokontakt (-er) / Thermo contact (-s) t eller/or blank
Extra information Additional informationLuftriktning Direction of airow:
Ange MF eller FM fr luftriktning Motor-Flkthjul eller Indicate MF or FM for airow direction Motor-Fan orFlkthjul-Motor. Fan-Motor.
Vingvinkel vid PFJ1 och PFJ2 Pitch angle for PFJ1 and PFJ2 Optimeras frn fall till fall Optimized to t requested performance
-
7/18/2019 Akron Fans
21/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
AF och AFR - Axialktar frvgg- eller modulmontageAKRONs axialktar AF och AFR fr vgg- ellermodulmontage, dr era ktar monteras parallellt,r avsedd fr miljer dr normalt korrosionsskyddkrvs. AF har cirkulr ram med fstron medan AFRhar en kraftig integrerad kvadratisk montageram medinfstningspunkter runtom p yttersidor och framsida.
AF och AFR-chassi erbjuds i 100% galvaniserat ut-frande, typ glv.
AF och AFR levereras med valfritt AKRON axialkthjul,antingen helgjutet eller justerbart. Flkthjul medjusterbara vingar nns fr bde en luftriktning, typ PFJ1och fr reverserande riktning typ PFJ2.
AF och AFR r konstruerade fr optimalt arbete vidluftriktning MF (Motor-Flkthjul) men kan ven anvndasvid riktning FM (Flkthjul-Motor) eller reverserandedrift. MF r huvudalternativ; Dels r ktomfattningendysformad och dels arbetar kthjulet, med hjlp avmotorbryggan, med bsta verkningsgrad vid dennaluftriktning. MF ger ven bttre kylning av motorn.
Berringsskydd, monterat mellan motor och kthjul,ingr i AF och AFR. Berringsskydd p kthjuletsmotsatta sida (tillbehr) mste nnas om kteninstalleras p ett stt som gr den sidan tkomlig. AF and AFR - Axial ow fan
units for wall or modular mountAKRONs axial fan units AF and AFR for wall or modularmount, where a number of units are mounted in parallel,are designed for environments where normal corrosionprotection is required. The AF has a circular framewith mounting ears while AFR has a strong integratedsquare mounting frame with attachment points aroundthe outer sides and on the front.
The AF and AFR casings are offered in 100% galvanizedmaterials, type glv.
AF and AFR comes with any of AKRONs axial impellers,either solid cast or adjustable. Impellers with adjustablewings are available for either single direction of air, typePFJ1 or for reversible directions type PFJ2.
AF and AFR are designed for optimal operation at MFdirection of air (Motor-Fan) but may also be used atFM direction (Fan-Motor) or reversing directions. MFis the main option; Firstly the casing is formed to aninlet nozzle and secondly the impeller, with help fromthe motor bracket, achieves the best efciency with thisair ow direction. MF also provides better cooling of themotor.
A wire guard, mounted between the motor and theimpeller, is included in the AF and AFR fan units. Awire guard on the opposite side (accessory) must betted if the unit is installed in a way that makes that sideaccessible.
21
-
7/18/2019 Akron Fans
22/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
StorlekSize
Amm
Bmm
Cmm
Amm
Bmm
Cmm
fDmm
nD Dmm
Fmm
Hminmm
Hmaxmm
Lmm
LBmm
tmm
m*kg
050 500 560 600 470 470 470 12 12 12 530 71 112 140 192 3 13
056 560 620 660 488 488 488 12 12 12 590 71 132 140 253 3 16
060 600 656 700 545 545 545 12 12 12 630 71 132 140 253 3 16
063 630 690 730 545 545 545 12 12 12 660 71 132 140 253 3 17,5
071 710 770 810 596 478 715 12 16 12 740 80 132 140 254 3 19
080 800 860 900 673 539 806 12 16 12 830 80 132 180 254 3 22090 900 970 1000 742 594 890 12 16 12 930 100 160 180 354 3 25
100 1000 1070 1100 811 650 973 13 16 12 1030 100 160 180 356 3 36
112 1120 1190 1220 868 585 1150 13 20 12 1150 112 180 225 391 3 53
125 1250 1320 1350 955 645 1265 13 20 12 1280 132 200 225 434 3 57
140 1400 1470 1500 - - - - 20 12 1430 160 250 225 524 4 -
160 1600 1680 1720 - - - - 24 12 1630 160 280 225 614 4 -
StorlekSize
Rmm
Fmm
Gmm
Imm
Jmm
Kmm
Mmm
Nmm
Omm
Pmm
mkg
050 625 540 560 30 142 50 11 175 50 0 10
056 685 600 620 30 158 50 11 195 50 0 11
063 755 670 690 30 175 50 11 215 50 0 12
071 835 750 770 30 240 50 11 245 50 0 13
080 925 840 860 30 268 50 11 275 50 0 21
090 1025 940 970 30 297 50 11 310 50 0 23
100 1125 1050 1070 30 340 50 11 350 50 0 26
112 1270 1170 1190 30 335 100 13 350 50 60 29
125 1400 1300 1320 30 370 100 13 400 50 60 32
140 1550 1450 1470 30 411 100 13 450 50 60 36
160 1750 1650 1680 30 523 100 13 500 50 60 40
Ram / Frame
Mttskiss - AF / AFR Dimensional drawing - AF / AFR
Flktchassi / Fan casing
* Vikt avser chassi exklusive motor och kthjul* Weight is casing excluding motor and impeller
22
-
7/18/2019 Akron Fans
23/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Tillbehr
Tillbehr bestlles alltid separat inkl specikation avmaterial.
Berringsskydd p icke motorsida
Observera:
Standard trefasmotor, D230/Y400 t.o.m. 4 kW ochD400/Y690 fr.o.m. 5,5kW.
Om kten ej avses installeras otkomligt i CE-mrktapparat skall berringsskydd fr icke motorsidabestllas separat.
Accessories
Accessories are always ordered separately includingspecication of materials.
Wire guard on non motor side
Please observe:
Standard 3-phase motor D230/Y400 up to andincluding 4 kW and D400/Y690 from 5,5kW.
If the fan unit is not intended to be mounted out of reach in CE marked application, a wire guard
for the non motor side should be ordered separately.
23
Specication
Flkt / FanACR - aaa - bbb - ccccccc - dd,d / ep f/f t
Storlek / Size Nom. diameter cm aaa = 050 .. 160
Material / Materials Varmgalv/ Hot dip galvanised bbb = glvFlkthjul / Impeller Helgjutet / Solid cast c1 = H c2-5 = 0500 .. 1271 (se diagram / see diagram) Axelhl /Shaft hole c6-7 = 19.. 75
Justerbart /Adjustable c1-2 = J1 eller / or J2 Nav /Hub 28L c3 = 2 40L c3 = 4 40F c3 = 5 56L c3 = 6
56F c3 = 7 Ant vingar /No of blades 6 c4 = 3 12 c4 = 6 Axelhl /Shaft hole c5-6 = 19.. 75
Motoreffekt kW / Motor rating kW dd,d = 0,25 .. 90,0
Poltal / No. of poles e = 2, 4, 6 eller / or8
Spnning / Voltage 240/400V f/f = 2/4 400/690V 4/6
Termokontakt (-er) / Thermo contact (-s) t eller/or blank
Extra information Additional informationLuftriktning Direction of airow:
Ange MF eller FM fr luftriktning Motor-Flkthjul eller Indicate MF or FM for airow direction Motor-Fan orFlkthjul-Motor. Fan-Motor.
Vingvinkel vid PFJ1 och PFJ2 Pitch angle for PFJ1 and PFJ2 Optimeras frn fall till fall Optimized to t requested performance
-
7/18/2019 Akron Fans
24/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
PFV - Axialktar fr vgg- ellermodulmontage
AKRONs axialkt PFV fr vgg- eller modulmontage,dr era ktar monteras parallellt, r avsedd fr miljerdr utkat korrosionsskydd krvs. PFV har en integreradkvadratisk montageram med infstningspunkter ihrnen.
PFV-chassit erbjuds i 100% rostfria material, stl ochaluminium.
PFV levereras med valfritt AKRON axialkthjul,antingen helgjutet eller justerbart.
PFV r konstruerade fr optimalt arbete vid luftriktningMF (Motor-Flkthjul) men kan ven anvndas vidriktning FM (Flkthjul-Motor). MF r huvudalternativ;dels r ramen dysformad och dels arbetar kthjulet,med hjlp av motorbryggan, med bsta verkningsgradvid denna luftriktning. MF ger ven bttre kylning avmotorn.
Berringsskydd, monterat mellan motor och kthjul,ingr i PFV. Berringsskydd p kthjulets motsattasida (tillbehr) mste nnas om kten installeras pett stt som gr den sidan tkomlig.
PFV - Axial ow fan units forwall or modular mount
AKRONs axial fan unit PFV for wall or modular mount,where a number of units are mounted in parallel, isdesigned for environments where enhanced corrosionprotection is required. PFV has an integrated squaremounting frame with attachment points in the corners.
The PFV casing is offered in 100%stainless materials, steel and aluminium.
PFV comes with any of AKRONs axialimpellers, either solid cast or adjustable.
PFV is designed for optimal operation atMF direction of air (Motor-Fan) but mayalso be used at FM direction (Fan-Motor).MF is the main option; Firstly the casing isformed to an inlet nozzle and secondly theimpeller, with help from the motor bracket,achieves the best efciency with this airow direction. MF also provides bettercooling of the motor.
A wire guard, mounted between the motorand the impeller, is included in the PFVfan unit. A wire guard on the opposite
side (accessory) must be tted if the unitis installed in a way that makes that sideaccessible.
StorlekSize
Amm
Bmm
Cmm
Dmm
Emm
m*kg
Motormin - max
031 400 30 250 305 366 5 63-80
035 450 30 250 350 416 6 63-80
040 500 35 360 400 466 9 63-100
045 550 35 360 450 516 10 63-100
050 600 35 360 500 566 11 63-100
056** 660 35 390 560 626 14 71-112
063** 740 40 390 630 706 16 71-112
071** 820 40 465 710 786 20 90-132
080** 910 40 465 800 876 21 90-132
** Storlekar som utgtt ur sortimentet.Erstts av ACR/AFR
** Sizes wich no longer remains in stock.Replaced by ACR/AFR.
24
* Vikt avser chassi exklusive motor och kthjul
* Weight is casing excluding motor and impeller
-
7/18/2019 Akron Fans
25/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Tillbehr
SKF WT-lager, fr omg. temp. - 40 till + 65 C.
Berringsskydd p icke motorsida
Observera:
Standard trefasmotor, D230/Y400 t.o.m. 4 kW ochD400/Y690 fr.o.m. 5,5kW.Om kten ej avses installeras otkomligt i CE-mrkt
apparat skall berringsskydd fr icke motorsidabestllas separat.
Accessories
SKF WT-bearings, for ambient temperatures - 40 to+65 C
Wire guard on non motor side
Please observe:
Standard 3-phase motor D230/Y400 up to andincluding 4 kW and D400/Y690 from 5,5kW.If the fan unit is not intended to be mounted out of reach in CE marked application, a wire guard should
be ordered separately.
Specifcation
Flkt / FanPFV - aaa - b,bb kW / cp - d/d V e
Storlek / Size aaa = 031, 035, 040,045, 056
Motoreffekt kW / Motor rating kW b,bb = 0,25 ..
Poltal / No. of poles c = 2, 4, 6 eller / or8
Spnning / Voltage 240/400V d/d = 2/4
400/690V 4/6
Om termokontakt / If thermo contact e = t
25
-
7/18/2019 Akron Fans
26/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
AKD Two stage axial fans with
counter rotating impellersAKRONs two stage axial fan unit AKD, with counterrotating impellers, is suitable for most industrialapplications. AKD can be tted to ductworks with thesame diameter or, with an adapter, to other diameters.
Alternatively, AKD may be mounted on a wall, thentogether with a square mounting frame (accessory).
The AKD casing is offered in 100% galvanized materials,type glv.
The counter rotating impellers in AKD, which aremounted within a few cm from each other, are thoroughlytested for a number of blades, blade proles and bladeangels to give optimum efciency and pressure gain.
Any wire guard for the in- or outlet side is accessory. Awire guard must be tted if the fan unit is installed in away that makes the moving parts accessible.
AKD Tvstegs axialktarmed kontraroterande hjul
AKRONs tvstegs axialkt AKD, med kontraroterandehjul, passar i de esta industriapplikationer. AKD kanmonteras mot kanalsystem med samma diameter eller,med hjlp av adapter, mot annan diameter. Alternativtkan AKD monteras mot vgg, d lmpligen tillsammansmed kvadratisk montageram (tillbehr).
AKD erbjuds i 100% galvaniserat utfrande, typ glv.
De kontraroterande kthjulen i AKD, som r placeradep ngra cm avstnd frn varandra, r noggrantutprovade avseende vingantal, vingprol och vinklar fratt ge optimal verkningsgrad och tryckuppsttning.
Eventuellt berringsskydd fr in- eller utloppssidar tillbehr. Berringsskydd mste nnas om kteninstalleras p ett stt som gr de rrliga delarnatkomliga.
26
Storlek Flkthjul / Impeller Motor / MotorSize Steg1 / Stage 1 Steg 2 / Stage 2 Effekt / Power (kW) Storlek / Size (mm)
031 PFV31/H/310/26 AFX300-20kv/V/310/20 2 x 0,37 71 / 14
040 PFV40/H/395/26 PF50/V/395/21 2 x 1,5 90 / 24
050 PF60-5/H/495/15 PF50/V/495/10 2 x 3,0 100 / 28
060/ 2x5,5 PF60-5/H/595/12 PF60-4/V/595/9 2 x 5,5 112 / 28
060 / 2x7,5 AFX600-14-IV/V/595/14 AFX600-17-IIH/17 2 x 7,5 132 / 38
060 / 2x11,0 PFV63/H/595/27 AFX600-14-IV/V/595/14 2 x 11,0 132 / 38
080 PF90/V/795/15 PFH90/H/795/8,5 2 x 4,0 112 / 28
090 PF90/V/895/14 PFH90/H/895/7 2 x 5,5 132 / 38
100 PF100/V/995/12 PFH100/H/995/6 2 x 7,5 132 / 38
112 PF112/V/1114/12 PFH112/H/1114/6 2 x 11,0 160 / 42
125 PF125/V/1243/14,5 PFH125/H/1243/8,5 2 x 18,5 180 / 48
Tillbehr
Tillbehr bestlles alltid separat inkl specikation avmaterial. Tillbehr som avses placeras p dysanseller diffusorns stornde vljs en storlek strre nktchassi:
Stdftter MotnsRam Spiroanslutning
Berringsskydd DiffusorInloppsdysa Frlngningscylinder
Observera:Standard trefasmotor, D230/Y400 t.o.m. 4 kW och
D400/Y690 fr.o.m. 5,5kW.
Om kten ej avses installeras otkomligt i CE-mrktapparat skall berringsskydd bestllas separat.
Accessories
Accessories are always ordered separately includingspecication of materials. Accessories placed on inletnozzle or large side of diffuser should be chosen onesize larger than fan casing:
Support feet Flange Frame Connection spigot
Wire guard DiffuserInlet nozzle Extension cylinder
Please observe: Standard 3-phase motor D230/Y400 up to and
including 4 kW and D400/Y690 from 5,5kW.
If the fan unit is not intended to be mounted out of reach in a CE marked application, a wire guard
should be ordered separately.
-
7/18/2019 Akron Fans
27/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
StorlekSize
Amm
Bmm
Dmm
Emm
F Lmm
m*kg
031 397 355 315 12 8 650 36
040 500 450 400 12 8 650 57
050 600 560 500 12 12 650 90
060/ 2x5,5 700 656 600 11 8 820 163
060/ 2x7,5 700 656 600 11 8 820 212
060/ 2x11,0 700 656 600 11 8 820 230
080 900 860 800 12 16 820 263
090 1000 970 900 14,5 16 1070 350
100 1100 1070 1000 14,5 16 1070 382
112 1220 1190 1120 14,5 20 1320 456
125 1350 1320 1250 14,5 20 1320 590
*Totalvikt: motor, kthjul, chassi * Total weight: motor, impeller, casing
Kapaciteter / Capacities
27
Mttskiss / Dimensional drawing
-
7/18/2019 Akron Fans
28/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
RFL -RadialktarAKRONs radialkt RFL r avsedd frtransport av torr och ren luft i ventilationsanlggningar. RFL kan, med hjlp av
srskilda anslutningsdetaljer (tillbehr),kanalanslutas p bde sug- ochtrycksida. Vanligen levereras RFL medutblsningsriktning 1 enligt gur.
Chassit och kthjulet i RFL r tillverkadei lackerad stlplt, typ wpt. Ett enkeltgalvaniserat ramstativ ingr i kten.Den transporterade luften fr ej verstiga60C ej heller innehlla aggressiva ellerexplosiva komponenter.
Flkthjulet har baktbjda skovlar och rsvl statiskt som dynamiskt balanserat.
Flkthjulet r i standardutfrande vnster-roterande (medurs sett frn sugsidan)och sitter monterat direkt p motornsaxeltapp.
Berringsskydd p ktens sugsida ingri standardutfrandet. Berringsskydd ptrycksidan (tillbehr) mste nnas om kten installerasp ett stt som gr den sidan tkomlig.
Tillbehr: Berringskydd till utlopp Spiroanslutning till inlopp Spiroanslutning till utlopp Vibrationsdmpare
RFL -Radial
ow fan unitsAKRONs radial ow fanunits RFL are designedfor the transport ofdry and clean air in
ventilation systems. The RFL may, by using specialconnection parts (accessories), be connected toducting on both suction and pressure side. Commonlythe RFL is supplied with blow-off direction 1 as shownin gure.
The casing and impeller in the RFL are made of wetpainted steel, type wpt. A simple galvanized support
frame is included in the fan casing. The transportedair must not exceed 60C nor contain aggressive orexplosive components.
The impeller has backward curved blades and is bothstatically and dynamically balanced. The impeller is,in the standard version, left rotating (clockwise seenfrom the suction side) and is mounted directly onto themotors shaft extension.
A wire guard, mounted on the suction side, is includedin the RFL fan unit. A wire guard on the pressure side(accessory) must be tted if the unit is installed in a waythat makes that side accessible.
Accessories: Wire guard on outlet Duct connection for inlet Duct connection for outlet Vibration absorbers
28
Utblsningsriktning 1 r standard, vriga p begran.RFL 100 nns endast med utblsriktning 1.
Blow - off direction 1 is standard, others available onrequest. RFL 100 is available with direction 1 only.
1 2 3 4
-
7/18/2019 Akron Fans
29/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Storlek
Size
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
H
mm
I
mm
J
mm
K
mm
L
mm
Motor
mm/kW/rpm
m
kg40-11 634 267 886 578 590 302 400 500 222 600 106 45 90 / 2,2 /2830 59
40-15 634 267 886 578 630 340 400 500 260 600 106 45 100 / 30 / 2865 64
45-13 713 301 977 632 660 327 400 560 247 600 106 45 112 / 4,0 / 2865 88
63-19 1011 427 1320 831 730 446 630 800 366 600 106 45 100 / 3,0 / 1425 120
63-25 1011 427 1320 831 775 506 630 800 426 1000 106 45 112 / 4,0 / 1430 146
71-21 1130 475 1463 915 870 490 630 900 410 1000 106 45 132 / 5,5 / 1440 197
71-26 1130 475 1463 915 910 545 630 900 465 1000 106 45 132 / 7,5 / 1440 213
80-26 1266 533 1627 1014 1030 565 800 1000 485 1000 106 45 160 / 11,0 / 1460 293
80-31 1266 533 1627 1014 1090 615 800 1000 535 1000 106 45 160 / 15,0 / 1460 320
90-28 1404 590 1804 1120 1110 605 800 1120 525 1000 106 45 180 / 18,5 / 1465 445
90-31 1404 590 1804 1120 1190 640 800 1120 560 1000 106 45 180 / 22,0 / 1465 487
100-30 1570 660 1990 1232 1270 675 1000 1250 575 1224 100 50 200 / 30,0 / 1475 620
100-35 1570 660 1990 1232 1365 730 1000 1250 630 1224 100 50 225 / 37,0 / 1475 740
Kapaciteter /Capacities RFL
29
Mttskiss /Dimensional
drawing
-
7/18/2019 Akron Fans
30/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
TurboClean StoftavskiljningsktAKRONs stoftavskiljningskt TurboClean (TC) r ett
kombinerat kt- och avskiljningsaggregat avsett attrena stoftbemngd luft i t.ex. spannmlsanlggningar.TC nns med tre kapaciteter; 15, 22 och 30kW, och tvmontageutfranden; vertikalt och horisontellt.
Stoftavskiljningen uppns genom att centrifugalkraftenp partiklarna i den starkt roterande luftstrmmenuppstrms avskiljardelen yttar ut partiklarna tillchassits periferi. Den perifera delen av luften skalassedan av och leds till en cyklon dr partiklarnaavskiljs. Den rena avluften frn cyklonen leds tillktinloppet. Avskiljningsgraden, som beror av bl.a.luftde och partikelstorlek, har provats av SverigesTekniska Forskningsinstitut och r under normala
desfrhllanden ca 95% fr synliga partiklar.Flkthus och avskiljardel tillverkas i kraftig varmgalvadstlplt och kthjulet i lackerad stlplt. vriga kom-ponenter r i varmfrzinkat material.
Flkthjulet i TC r ett sk. diagonalhjul med srskilthg verkningsgrad och lg ljudniv. Hjulet som harbaktbjda skovlar r svl statiskt som dynamisktbalanserat och sitter monterat direkt p motorns axel-tapp.
Eventuellt berringsskydd fr TC-ktens in- ellerutloppssida r tillbehr. Berringsskydd mste nnasom kten installeras p ett stt som gr de rrliga
delarna tkomliga.
Tillbehr. Flnsar, vibrationsdmpare, exibla stosar,berringsskydd.
TurboClean - Dust extraction
fanAKRONs dust extraction fan unit TurboClean (TC) is acombined fan and extraction unit intended to separatedust from contaminated air in e.g. cereal plants. The TCis available with three capacities, 15, 22 and 30kW, andtwo mounting congurations, vertical and horizontal.
The dust extraction is achieved when the centrifugalforce on the particles in the strongly rotating air streamupstream the separation unit moves the particles outto the periphery of the casing. The peripheral part ofthe air is then stripped off and led to a cyclone wherethe particles are separated. The clean exhaust air fromthe cyclone is then again headed to the fan inlet. Theseparation efciency, which depends on the particularairow and particle size, has been tested by theTechnical Research Institute of Sweden and is undernormal ow conditions about 95% for visible particles.
The fan casing and the separation unit are made fromhot dip galvanized steel and the impeller in wet paintedsteel. Other components are zink coated.
The impeller in the TC is a diagonal impeller withparticularly high efciency and low noise. The impeller,which has backward curved blades is both staticallyand dynamically balanced, and mounted directly ontothe motors shaft extension.
Any wire guard for the TC fan units in- or outlet sideis an accessory. A wire guard must be tted if the fanunit is installed in a way that makes the moving partsaccessible.
Accessories. Flanges, vibration absorbers, exiblespigots, wire guard.
Vertical TC
Spannmlstork med Horisontella TCGrain dryer with Horizontal TC
30
-
7/18/2019 Akron Fans
31/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Kapaciteter / Capacities
Conguration VConguration H
StorlekSize
kW Amp(400V)
Speedrpm
mkg
15V & 15H 15 28 1460 510
22V & 22H 22 40 1465 570
30V & 30V 30 54 1475 665
31
Mttskiss / Dimensional drawing
-
7/18/2019 Akron Fans
32/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
RGFA -RkgasktAKRONs rkgaskt RGFA r avsedd fr transport avgaser med temperatur upp till 400C.
RGFA-chassit tillverkas i stlplt som helsvetsas och
lackeras. Flkthjulet p RGFA, ven detta i helsvetsadstlplt, har raka radiellt riktade skovlar med hgsjlvrensningsfrmga fr att t.ex. sotpartiklar inte skallkunna anhopas och orsaka obalans.
Motorn har isolationsklass F och standardlager. Ettisolerande kylnav, monterat p axeln mellan kthjuletoch motorn, skyddar motorns lager frn verhettning.Omgivande luft som kyler motorn och kylnavet skallhlla max 40C. Motorer fr hgre omgivningstemperaturoffereras p begran.
Inloppet p RGFA r frsett med en steglst vridbarns. Utloppet p den mindre storleken, RGFA-20,
har ett frmonterat rkgasspjll. Den strre storleken,RGFA-45, injusteras antingen med spjll (tillbehr) ellerfrekvensomriktare.
Tillbehr:
Dragregulator Frekvensomriktare Rkgasrr T-rr Flns Skorstenshuv Rkgasspjll till RGFA 45
RGFA -Flue gas fan unitAKRONs ue gas fan unit RGFA is intended for thetransport of gases with temperatures up to 400C.
The RGFA casing is manufactured from steel, all jointsare fully welded. The RGFA impeller, also fully welded,has straight radially directed blades with a high self-cleansing ability not allowing e.g. soot particles beingaccumulated and causing imbalance.
The motor of insulation class F has standard bearings.An insulating adapter, mounted on the shaft betweenthe impeller and the motor, protects the motor bearingsfrom overheating. The ambient air, which cools themotor and the adapter, must not exceed of 40C. Motors
for higher ambient temperatures are available onrequest.
The inlet of the RGFA can be rotated to t at anyangle. The outlet of the smaller size, RGFA-20, hasa pre-mounted ue gas throttle. The gas ow of thelarger size, RGFA-45, is adjusted either with a throttle(accessory) or a frequency converter.
Accessories:
Draught regulator Frequency converter Flue gas duct T - duct Flange Chimney cap Flue gas throttle for RGFA 45
StorlekSize
kW rpmAmp
(400V)A
mmBmm
Cmm
Dmm
Emm
Fmm
Gmm
Hmm
mkg
20-4 0,37 1350 1,25 465 200 200 230 260 430 130 460 20
20-2 0,55 2900 2,40 465 200 200 230 260 430 130 460 20
45-4 0,75 1450 3,45 529 250 254 280 320 678 235 625 50
45-2 7,5 2900 11,4 634 254 254 280 346 716 262 678 65
A
B
C
D
E
H
G
F
32
-
7/18/2019 Akron Fans
33/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
PFKHD - Axialktar fr tuffafrhllanden
AKRONs extra frstrkta axialkt fr kanalmontage,PFKHD, passar i de tuffaste industriapplikationer
ssom gruvor och tunnlar. PFKHD kan monteras motkanalsystem med samma diameter eller, med hjlp avadapter, mot annan diameter.
PFKHD-chassit erbjuds i 100% varmgalvaniseratmaterial, typ glv. Plttjockleken r 6mm fr de strreoch 4mm fr de mindre storlekarna.
PFKHD levereras med AKRONs justerbara axialkthjulPFJ1. Fr att fullt utnyttja energin i luften efterfljs hjuletav en ledskeneapparat som riktar upp luften till axiellstrmning och samtidigt hjer trycket i luften.
Till PFKHD nns en rad tillbehr i frstrkt utfrandessom inloppsdysar, utloppsdiffusorer, ramstativ,
ljuddmpare etc.Eventuellt berringsskydd fr PFKHD-ktens in- ellerutloppssida r tillbehr. Berringsskydd mste nnasom kten installeras p ett stt som gr de rrligadelarna tkomliga.
PFKHD Heavy duty axial ow fan
units
AKRONs reinforced axial fan unit PFKHD is suitablefor the toughest industrial applications such as minesand tunnels. PFKHD can be tted to ductworks with thesame diameter or, with an adapter, to other diameters.
The PFKHD casing is offered in 100% hot dippedgalvanized steel, type glv. The material thickness is
6mm for the larger and 4mm for the smaller sizes.PFKHD comes with AKRONs adjustable impeller PFJ1.In order to fully make use of the energy in the air, theimpeller is followed by guide vanes redirecting theair into axial ow and simultaneously increasing thepressure in the air.
There is a variety of heavy duty accessories for thePFKHD, such as inlet nozzles, outlet diffusers, supportframes, silencers, etc.
Any wire guard for the PFKHD fan units in- or outletside is an accessory. A wire guard must be tted if thefan unit is installed in a way that makes the moving
parts accessible.
PFKHD tre stegs ktpaket medljuddmpare, inloppsdysa ram.
PFKHD three stage fan unit with
silencers, inlet nozzel frame.
33
-
7/18/2019 Akron Fans
34/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Mttskiss / Dimensional drawing
* Vikt avser chassi exklusive motor och kthjul* Weight is casing excluding motor and impeller
34
Storlek /
Nav /
Size
Hub
050
28
063
28 / 40
071
40
080
40 / 56
090
40 / 56
100
40
112
56
125
56
140
56 / 76
160
56 / 76
180
76
A (mm) 500 630 710 800 900 1000 1120 1250 1400 1600 1800
B (mm) 560 690 770 860 970 1070 1190 1320 1470 1680 1880
C (mm) 600 730 810 920 1020 1120 1240 1370 1520 1720 1920
nD 12 12 16 16 16 16 20 20 20 24 24
D (mm) 12 12 12 14,5 14,5 18,5 14,5 14,5 14,5 18,5 18,5E (mm) 1120 1120 1120 1120 1120
F (mm) 1020 1020 1020 1020 1020
G (mm) 56 56 56 56 56
J (mm) 19 19 19 19 19
K (mm) 1038 1038 1038 1038 1288
L (mm) 540 625 900 1150 1150 900 1150 1150 1150 1150 1400
N (mm) 710 775 850 964 1066,5
P (mm) 380 429 480 572 586 671 708 780 857/891 967/994 1096
Hmin (mm) 80 100/132 132 132/200 200 132 200 200 200/250 200/250 250
Hmax (mm) 132 132/180 180 180/280 200/280 180 280 280 280/315 280/315 315
t (mm) 4 4 4 6 6 6 6 6 6 6 6
m* (kg) 50 64/89 99 217/228 236/248 204 321 355 385/480 433/535 689
-
7/18/2019 Akron Fans
35/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Tillbehr
Tillbehr bestlles alltid separat inkl specikation avmaterial. Tillbehr som avses placeras p dysanseller diffusorns stornde vljs en storlek strre nktchassi:
Stdftter fr 050-100 Ramstativ Kanalanslutning Diffusor Motns Inloppsdysa med
Frlngningscylinder berringsskydd
Observera:
Standard trefasmotor, D230/Y400 t.o.m. 4 kW ochD400/Y690 fr.o.m. 5,5kW.
Om kten ej avses installeras otkomligt i CE-mrktapparat skall berringsskydd bestllas separat.
Accessories
Accessories are always ordered separately includingspecication of materials. Accessories placed on inletnozzle or large side of diffuser should be chosen onesize larger than fan casing:
Support feet for 050-100 Support frame Connection spigot Diffuser Flange Inlet nozzle with wire
Extension cylinder guard
Please observe:
Standard 3-phase motor D230/Y400 up to andincluding 4 kW and D400/Y690 from 5,5kW.
If the fan unit is not intended to be mounted out of reach in CE marked application, a wire guard should
be ordered separately.
Specication
Flkt / an - aaa - - cc - , ep
Storlek / Size Nom. diameter cm aaa = 050 .. 180
Flkthjul / Impeller Nav /Hub 28L
F = frstrkt nav /reinforced hub 40LL = lttviktsnav /leight weight hub bbb = 40F
56L56F7696
Antal vingar cc =/No of blades 12
Motoreffekt kW / Motor rating kW ddd = 1,1 .. 200
Poltal / No. of poles e = 2, 4, 6 eller/or8
Termokontakt (-er) / Thermo contact (-s) f = t
Extra information Additional information:
Vingvinkel Pitch angle Optimeras frn fall till fall Optimized to t the requested performance
35
-
7/18/2019 Akron Fans
36/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
LDPHD Frstrkt utfrande
LDPHD r konstruerade fr de tuffaste applikationeroch r itigt anvnda fr dmpning av ktljud i bl.a.gruvor och tunnlar.
LDPHD r tillverkad i extra kraftigstlplt. Den varmfrzinkadekantiga mantelplten r in-vndigt ytterligare frstrkt medlngsgende stlproler. In- ochutloppen r varmgalvade efter
svetsning och har anslutnings-nsar som passar direkt mot
AKRONs kanalktar, texPFKHD.
LDPHD levereras med eller utancirkulr centrumbaffel. Bafar nns i diametrar sommatchar naven p AKRONs axialkthjul, man kandrfr bortse frn de tryckfrluster baffeln orsakar.
LDPHD - Heavy Duty
LDPHD is designed for the toughest applications andis widely used for attenuation of fan noise in e.g. mines
and tunnels.
LDPHD is made of extra sturdy steelsheet. The galvanized angular shellis further reinforced with longitudinalsteel proles on the inside. The inletand outlet are hot dip galvanizedafter welding. The connection anges
t directly to AKRONs fans for ductmount, for example PFKHD.
LDPHD comes with or without circularcentre pod. The pods have diametersmatching the hubs on AKRONs axial
impellers. The pressure losses caused by the pod maytherefore be ignored.
36
LDS Med spiroanslutning
630 och 800mm.
LDS tillverkas i galvaniserad st lpl t,a sor ents tet r mm. n- ocut oppsn arna ar gumm ttaspiroanslutning med nippelmtt.
LDS levereras med eller utan plana e . a e n, som ar run at
inlopp, ger ett stort extra tillskotttill ljuddmpningen men ger ventryc r uster som norma t nte anbortses frn.
LDS With spiral duct tting
LDS is supplied in sizes 500, 630 and800mm.
LDS is manufactured in galvanizedsteel. The absorbing layer is 100mm.The in- and outlets of the silencer havemale ttings, rubber gaskets included, forspiral ducting.
LDS comes with or without a at splitter.The splitter, with rounded inlet, providesa substantial additional contribution tothe attenuation of sound but also adds
pressure losses, which normally cannot be ignored.
LDC Med ktanslutningLDC tillhandahlls i ktstorlekar800mm och uppt.
LDC tillverkas i galvaniserad st lpl t,absorbentskiktet r 100mm. In- ochutloppsndarna r anpassadefr bultning direkt mot AKRONskanalktar, tex AB, AK och AKD.
LDC levereras med eller utancirkulr centrumbaffel. Bafar nnsi diametrar som matchar naven p
AKRONs axialkthjul, man kandrfr bortse frn de tryckfrlusterbaffeln orsakar.
LDC With fan tting
s prov e n an s zes mm anupwards.
LDC is manufactured in galvanized steel.The absorbing layer is 100mm. The in-an ou e s o e s encer are es gneto t directly on AKRONs fans for ductmount, for example AB, AK or AKD.
LDC comes with or without a circularcentre pod. The pods have diametersmatching the hubs on AKRONs axial
impellers. The pressure losses caused bythe pod may therefore be ignored.
LjuddmpareAKRONs ljuddmpare fr axialktar nns i olikautfranden beroende p installationens art. Samtligatyper r cirkulra och galvaniserade med ljudabsorbent
av mineralull med densitet 100kg/m.
SilencersAKRONs silencers for axial fans are available indifferent styles depending on type of application. Alltypes are circular and galvanized and have mineral
wool absorber with density 100kg/m.
-
7/18/2019 Akron Fans
37/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
37
Storlek / Size Benmning / Type dimm
L
mm
dymm
m
kg
LDS050 L1200 glv 500 1200 735 41050
LDS050 L1500 glv 500 1500 735 51
LDS050 L1200 cb glv 500 1200 735 45
LDS050 L1500 cb glv 500 1500 735 56
LDS063 L1200 glv 630 1200 880 52
063 LDS063 L1500 glv 630 1500 880 64
LDS063 L1200 cb glv 630 1200 880 57
LDS063 L1500 cb glv 630 1500 880 70
LDS080 L1200 glv 800 1200 1030 69
LDS080 L1500 glv 800 1500 1030 85
LDS080 L1200 cb glv 800 1200 1030 74
LDS080 L1500 cb glv 800 1500 1030 92
080 LDC080 L1010 glv 800 1010 1010 85
LDC080 L1010 cb40 glv 800 1010 1010 113
LDPHD080 L1240 glv 800 1240 1006 197
LDPHD080 L1240 cb40 glv 800 1240 1006 233
LDPHD080 L1240 cb56 glv 800 1240 1006 243
LDC090 L1010 glv 900 1010 1110 100
LDC090 L1010 cb40 glv 900 1010 1110 128
090 LDPHD090 L1240 glv 900 1240 1106 222
LDPHD090 L1240 cb40 glv 900 1240 1106 258
LDPHD090 L1240 cb56 glv 900 1240 1106 268LDC100 L1010 glv 1000 1010 1210 160
LDC100 L1010 cb40 glv 1000 1010 1210 188
100 LDPHD100 L1240 glv 1000 1240 1206 246
LDPHD100 L1240 cb40 glv 1000 1240 1206 282
LDPHD100 L1240 cb56 glv 1000 1240 1206 292
LDC112 L1210 glv 1120 1210 1330 180
LDC112 L1210 cb40 glv 1120 1210 1330 214
112 LDPHD112 L1490 glv 1120 1490 1326 294
LDPHD112 L1490 cb40 glv 1120 1490 1326 339
LDPHD112 L1490 cb56 glv 1120 1490 1326 352
LDC125 L1350 glv 1250 1350 1460 200
125 LDC125 L1350 cb40 glv 1250 1350 1460 240
LDPHD125 L1490 glv 1250 1490 1456 376
LDPHD125 L1490 cb56 glv 1250 1490 1456 439
LDPHD140 L1740 glv 1400 1740 1606 486
140 LDPHD140 L1740 cb56 glv 1400 1740 1606 558
LDPHD140 L1740 cb76 glv 1400 1740 1606 590
LDPHD160 L1740 glv 1600 1740 1752 513
160 LDPHD160 L1740 cb56 glv 1600 1740 1752 585
LDPHD160 L1740 cb76 glv 1600 1740 1752 617
180 LDPHD180 L2240 glv 1800 2240 2015 621
LDPHD180 L2240 cb76 glv 1800 2240 2015 752
Mtt / Dimensions
-
7/18/2019 Akron Fans
38/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
38
Storlek / Size Benmning / TypeDmpning (dB) vid medelfrekvens (Hz)
Attenuation (dB) at average frequency (Hz)
63 125 250 500 1k 2k 4k 8kLDS050 L1200 glv 3 6 14 16 13 7 7 9
050LDS050 L1500 glv 4 7 17 21 17 9 7 11
LDS050 L1200 cb glv 4 8 19 24 26 26 17 15
LDS050 L1500 cb glv 4 9 25 31 33 33 20 18
LDS063 L1200 glv 3 5 11 12 8 5 5 7
063 LDS063 L1500 glv 3 6 14 16 11 6 6 9
LDS063 L1200 cb glv 3 7 14 17 18 17 12 12
LDS063 L1500 cb glv 4 8 19 23 23 20 14 14
LDS080 L1200 glv 2 3 9 8 5 4 5 5
LDS080 L1500 glv 2 4 11 12 6 5 6 6
LDS080 L1200 cb glv 2 4 11 12 13 11 9 8
LDS080 L1500 cb glv 2 5 15 17 16 14 10 9
080 LDC080 L1010 glv 1 3 5 9 10 8 6 3
LDC080 L1010 cb40 glv 2 6 8 15 17 15 13 10
LDPHD080 L1240 glv 1 3 5 9 10 8 6 3
LDPHD080 L1240 cb40 glv 2 6 8 15 17 15 13 10
LDPHD080 L1240 cb56 glv 3 8 11 19 21 19 17 12
LDC090 L1010 glv 1 3 4 8 9 8 6 3
LDC090 L1010 cb40 glv 2 5 7 13 16 14 12 10
090 LDPHD090 L1240 glv 1 3 4 8 9 8 6 3
LDPHD090 L1240 cb40 glv 2 5 7 13 16 14 12 10LDPHD090 L1240 cb56 glv 3 7 10 17 20 18 16 12
LDC100 L1010 glv 1 3 4 7 9 7 6 3
LDC100 L1010 cb40 glv 1 4 6 11 15 14 11 9
100 LDPHD100 L1240 glv 1 3 4 7 9 7 6 3
LDPHD100 L1240 cb40 glv 1 4 6 11 15 14 11 9
LDPHD100 L1240 cb56 glv 2 5 8 14 17 17 14 11
LDC112 L1210 glv 1 4 5 9 9 7 5 3
LDC112 L1210 cb40 glv 2 5 10 10 12 9 8 7
112 LDPHD112 L1490 glv 1 4 5 9 9 7 5 3
LDPHD112 L1490 cb40 glv 2 5 10 10 12 9 8 7
LDPHD112 L1490 cb56 glv 3 6 11 12 15 12 11 9
LDC125 L1350 glv 1 3 4 8 9 7 5 3
125 LDC125 L1350 cb40 glv 2 4 8 9 10 8 7 7
LDPHD125 L1490 glv 1 3 4 8 9 7 5 3
LDPHD125 L1490 cb56 glv 2 5 10 14 16 12 10 7
LDPHD140 L1740 glv 1 4 6 10 8 6 5 2
140 LDPHD140 L1740 cb56 glv 2 6 12 12 11 9 8 6
LDPHD140 L1740 cb76 glv 3 8 14 16 14 12 10 8
LDPHD160 L1740 glv 1 3 4 8 7 6 6 2
160 LDPHD160 L1740 cb56 glv 1 4 10 11 9 8 7 6
LDPHD160 L1740 cb76 glv 2 5 12 14 11 10 9 7
180LDPHD180 L2240 glv 1 4 7 11 7 6 5 2
LDPHD180 L2240 cb76 glv 2 7 13 15 13 10 8 5
Dmpning /Attenuation
-
7/18/2019 Akron Fans
39/58
-
7/18/2019 Akron Fans
40/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
www.akron.se
Fjrilsspjll. AKRONs fjrillspjll nns itv utfranden; FSL fr de esta vanligafall och frstrkta FS konstruerad fr de
tuffaste applikationerna, bl.a. gruvor ochtunnlar. Bda typerna nns med justerbartfjdermotstnd dr trycket frn ktenppnar spjllet. FS nns dessutom medmotordrift. Nr spjllet r ppet hllstryckfrlusterna p minimal niv genomatt de tv axlarna, vari spjllbladenr fsta, r placerade efter varandra istrmningsriktningen och att spjllbladensinfstning i axlarna r aerodynamisktutformade.
Buttery dampers. AKRONs butterydampers are available in two types; FSLfor most ordinary cases, and the enforced
FS designed for the toughest applications,including mines and tunnels. Both types areavailable with adjustable spring resistance,the pressure of the fan then opens thedamper. FS can also be motor operated.When the damper is open, pressure lossesare kept to a minimum by placing the twoshafts, onto which the damper vanes areattached, inline in the ow direction and byxing the vanes to the shafts in an aerodynamical manner.
40
Diffusor. Diffusorns omvandlarrrelseenergi till statisk energi, dvs till tryckoch man nr nskad tryckuppsttning medlgre energitgng. ppningsvinkeln brvara liten och hastighetssnkningen stor,en bra diffusor blir drfr vanligen lng.
AKRONs korta diffusor med insats lserdetta problem p ett elegant stt. AKRONsdiffusorer r vanligen i varmgalvade ochtillverkade enligt specikation fr detaktuella projektet.
Kanalanslutning.Spiroanslutning,fr anslutning av kt mot spirokanal,tillverkas i galvad stlplt och klmsfast mot ktens utlopp med hjlp aven motns, se ovan. Anslutningenr gummittad och har nippelmtt.
AKRON tillhandahller ven kraftigavarmgalvaniserade anslutningar frmontage av kt mot andra cirkulrakanaler.
Flns.Flnsar fr anslutning av kt mott.ex. kanal eller vgg tillhandahlls i ettertal utfranden; storlekar t.o.m. 630mmvanligen i 3mm galvat och fr.o.m. 800mm
vanligen i 5mm lackerat stl.
Flange.Flanges for connection of fans toducts, walls etc. are provided in severalversions; sizes up 630mm usually in 3mmgalvanized and from 800mm usually in
5mm painted steel.
Diffuser. A diffuser converts kineticenergy into static, ie into pressure; thedesired pressure development is reachedwith lower energy consumption. Theopening angle should be small and thereduction in speed large, a good diffuser
is therefore usually long. AKRONs shortdiffuser with conical insert solves thisproblem in an elegant manner. AKRONdiffusers are usually hot dip galvanizedand dimensioned for the specied project.
Duct connection.Adapters connecting thefans to spiral ductings are manufactured ingalvanized steel. The adapter is clampedon to the fans outlet by using a ange,see above. The adapter is rubber sealedand has male dimensions. AKRON also
provides heavy duty hot-dip galvanizedadapters for mounting fans to any othertype of circular duct.
-
7/18/2019 Akron Fans
41/58
AB AKRON-Maskiner, 531 04 Jrps, tel +46 (0)510-91400, fax +46 (0)510-91649, info@akron.se
FLKTAR / FANS 2010
Helgjutna axialkthjulFlktvingarna har aerodynamisk proloch r till antal och vinklar noggrantutprovade fr hgsta verkningsgrad.
Samtliga helgjutna kthjul gjuts ialuminiumlegering och r statiskt ochdynamiskt balanserade.
Diagrammen som fljer gller fr luftmed densitet 1,2kg/m3 och fr ktutan
top related