air-cooled screw chiller fas air-cooled screw chiller – fas-e (low noise)

AIR-COOLED SCREW CHILLER

FAS

Air-Cooled Screw Chiller – FAS-E (Low Noise)

Air-Cooled Screw Chiller – FAS-D

3 series of products FAS-D : Air-Cooled Cooling Only Chiller FAS-H : Air-Cooled Heat Pump Chiller FAS-E : Low noise series

Air-Cooled Screw Chiller - FAS

Capacity Range R22 Chiller: 70RT~350RT R134a Chiller: 100RT~320RT

Siemens Controller

Various protection devices such as high discharge temperature protection, compressor overload protection, high/low pressure protection, water flow error, anti freeze protection, oil level switch, and automatic defrost functions.

Various protection devices such as high discharge temperature protection, compressor overload protection, high/low pressure protection, water flow error, anti freeze protection, oil level switch, and automatic defrost functions.

76 dB(A)

Low Noise Design

Spring isolator

FAS Chiller

Base

Low Noise and Vibration

Big torque angle blades with low noise

Direct drive Fan Motor

Low Noise and vibration

Air-Cooled Screw Chiller - FAS

European Manufacturer &Technology

Each compressor provide 3 steps, 4 steps or continuous (33%-100% / 25%-100%) capacity control delivers the precise capacity to match the building cooling load.

Each compressor provide 3 steps, 4 steps or continuous (33%-100% / 25%-100%) capacity control delivers the precise capacity to match the building cooling load.

Inner groove tubing Hydrophilic aluminum fins Inverted “M” Coil

High Performance Heat Exchanger

High Efficiency Microchannel Condenser