ad-ii important part-b questions
Post on 18-Oct-2015
308 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
5/28/2018 Ad-II Important Part-b Questions
1/3
JEPPIAAR ENGINEERING COLLEGE
DEPARTMENT OF AERONAUTICAL ENGINEERING
AE2303/Aerodynamics II/Important 15 questions
UNIT-I
1. i) Derive the area-mach number relation and explain why convergent-divergentnozzle is needed for supersonic flow. (8Marks)
ii) Explain what is choking in a C-D nozzle and show that the expression for
choked mass flow rate for an isentropic flow of duct through a duct is
(8Marks)
2. i) Derive the one dimensional adiabatic steady state energy equation and deduce theisentropic relations for a perfect gas. (8Marks)
ii) Obtain an expression for the speed of sound and show that the speed of sound is
proportional to the square root of the absolute temperature of air. (8Marks)
3. Problems based on C-D nozzle to find out the mass flow rate, throat area cross sectionalarea, pressure, velocity, and Mach number at the nozzle exit
UNIT-II
1. i) Show that the strength of a normal shock in a perfect gas depends only on Machnumber ahead of the shock or For an oblique shock wave bring out proper relationships
between the flows parameters in front of the shock and behind the shock. (8Marks)ii) Derive Rayleigh supersonic Pitot formula. Why is Rayleighs correction for total
pressure required in supersonic flows? (8Marks)
2. i) Derive Prandtl- Meyers Expansion waves for a flow over a convex corner.ii) Derive Prandtl relation for a normal shock in a perfect gas.
3. Problems based on shocks to find out the downstream(total pressure &temperature,density) conditions of the shocks, deflection angle, strength of the shock,
UNIT-III
1. i)Explain the procedure to obtain supersonic nozzle contour for a given Mach numberusing Method of characteristics. Also draw neat sketches for continuous and centred
expansion supersonic nozzles. (8Marks)
ii) Show that the local Mach number is unity at the point of maximum entropy on the
Rayleigh line. Or For the Rayleigh flow, show that the mach number
at which
temperature is maximum. Further find the value of
for =1.4 (8Marks)
2. i)Derive the Rankine-Hugoniot relation for a shock. (10Marks)ii) What is the difference between Rayleigh and fanno flow.(6Marks)
-
5/28/2018 Ad-II Important Part-b Questions
2/3
3. Problems based on the double wedge to calculate the flow Mach numbers and theslipstream using shock expansion theory or Problems based on two dimensional wedge to
find out CLand CDusing shock expansion theory
UNIT-IV
1. Problems based on two-dimensional wing profile or for a flat plate to calculate CLand CDusing linearized theory.
2. State the assumptions and limitations made in the small-perturbation potential theory andshow that the linearized pressure coefficient is a function of the perturbation velocity in
the Main flow direction only.
CP= - .
3. i) Describe the Prandtl-Glauert affine transformation for subsonic flow over airfoils andhighlight its significance.
ii) Explain about thin aerofoil theory for subsonic and supersonic flows.
UNIT-V
1. i) Explain about Shock induced separationii)Explain in detail about the effect of thickness, camber and aspect ratio on the
characteristics of wings
2. i)Briefly discuss transonic area rule and supercritical airfoilii)Write short notes on reflection of shock wave and expansion waves from free- surface
boundary.
3. i) Write brief notes on critical Mach number and drag divergence Mach number. ii) Explain how large drag increase takes place at transonic flow. What are the control
measures adopted at the design stage?
iii) Explain the advantages and disadvantages of the effect of sweepback
-
5/28/2018 Ad-II Important Part-b Questions
3/3
top related