9/18/2015© 2012 raymond p. jefferis iiilect 02 - 1 forms of communication

Post on 28-Dec-2015

220 Views

Category:

Documents

1 Downloads

Preview:

Click to see full reader

TRANSCRIPT

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 1

Forms of Communication

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 2

Internet Communications

• Largely carried on telephone network

• Lately quite a bit of privately owned fiber– communication carriers– electric companies– private organizations

• Some carried over television cables

• New conveyance by wireless providers

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 3

Present Telephone Conveyance

• ATM backbone (long distance)

• ATM switching at core

• T1 data lines to businesses (1.544 Mb/s)

• Copper “last mile”– voice grade lines– DSL possible using residual bandwidth outside

the voice channel - has distance limitations

Telephone on Internet (VOIP)

• Voice messaging using IP packets– Session layer setup and closing of “call”– Voice is digitized using CODEC– Encoded and packaged into frames– Encryption can be arranged (SRTP)– Transmitted over packet network (e.g. Internet)

• Uses Internet transport (IP)

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 4

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 5

Terms

• ATM - Asynchronous Transfer Mode

• DSL - Digital Subscriber Line

• DSLM - DSL Modem

• DSLAM - DSL Access Module

• POTS - Plain Ordinary Telephone System

• SONET - Synchronous Optical NETwork

ATM

• Asynchronous Transfer Mode– Bakbone of telephone system– Data in packets (48-bit cells)– Uses time-division multiplexing

• 8000 samples/second (CODEC)

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 6

DSL

• Digital transmission over phone lines

• Uses frequency channels above phone

• Channel filters separate Up/Down bands– Uses DSL Modem (DSLM) for this

• Speed depends on distance to TelCo station– 256 kb/s to 24 Mb/s data rate

• Becoming obsolete due to fiber and cable

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 7

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 8

TelCo Network Interface

ATM

ATM

ATM

CS

DSLAM

R R

S

S

S

...

CoreSwitching

EdgeSwitching

Access(Local Loop)

OC 192 Backbone T1

Copper

Copper

DSLM

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 9

Residential Data Lines• POTS line with modem

– 56 kb/s– rate depends on line quality

• DSL line with splitter/modem*– Advanced, up to 1.5M / 128K $59.95/month– Premium, up to 384K / 384K $69.95/month– Professional, up to 1.5M / 384K$79.95/month

-------------------------------------------------------------* Speed depends on distance to TelCo office

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 10

Digital Data Transmission

• Binary data

• Transmitted as pulses

• Pulses shaped by line bandwidth

• Pulses have high frequency components

• Limiting bandwidth limits data rate

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 11

Fourier Series of Bandlimited Pulse

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 12

Fourier Transform of Pulse

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 13

Notes:

• First crossover of spectral amplitude is at B

• 2B is effective bandwidth needed to transmit through noiseless channel.

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 14

Nyquist Bit Rate

• Relates three transmission variables:– Channel Capacity (C)– Bandwidth (B)– Signal levels (L) – quantization levels– Formula:

C = 2Blog2[L]

• Noise-free channel assumed

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 15

Nyquist Example:

• Formula: 2BLog2[L]

• Example:

L = 2 (binary signals), (Log2[L] = 1)

B = 3000 Hz (300 – 3300 Hz)

C = 2*3000*1 = 6000 [bits/s]

Note: Applies to noise-free channel only

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 16

Shannon Formula

• C = B log2(1 + SNR)

• Example:– B = 3000 Hz (300 – 3300 Hz)– SNR = 3163 (35 dB power ratio)– C = 34,882 [bits/s]

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 17

All Digital Telephony

• Voice-to-Digital conversion coding at transmitter

• Digital transmission

• Digital-to-Voice code conversion at receiver

• Conversions performed by COder-DECoder (CODEC) module at each end of line

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 18

Voice-Data Conversion

CODEC CODECVoice Data Voice

(8 bits)

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 19

Digital Data Frame on T1 Line

• Voice lines are low-pass filtered to 3.1 KHz– Why? (Anti-Aliasing)

• CODEC output is 8 bits wide

• Sampling rate is about 8000 samples/s

• Data rate is thus about 64000 bits/sec

• 24 lines carried on T1 link (1.544 Mb/s)

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 20

T1 Time-Division Multiplexing• Data frame starts with framing bit

• Data samples (8 bits each)

• 24 lines each supply a data sample every 125 microseconds (0.000125 sec)

• Samples are sequentially multiplexed

• 193 bits per data frame

• 1.544 Mb/s total data rate

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 21

Time Division Multiplexing

Multiplexer

Line 1

Line 2

Line n

...

Line 1

Line 2

Line n

...

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 22

Time Division De-Multiplexing

De-Multiplexer

Line 1

Line 2

Line n

...

Line 1

Line 2

Line n

...

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 23

De-Multiplexing

• Data samples are redistributed into lines

• Low-pass filter recovers analog voice

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 24

High-Speed Backbone

• 28 T1 streams merged to T3 stream

• ATM cells repackage data at core– 53 octets/cell

• 5 octets of header information

• 48 octets of data

• SONET frames– 8 x 810 = 6480 bits sent 8000 times per second– 51.85 Mb/s data rate (some frame overhead)

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 25

ATM Cell Transmission

Time

ATM Cell ATM Cell ... ATM Cell

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 26

TelCo Standard Data Rates

• T1 1.544 Mb/s (24 voice circuits)• T3 44.736 Mb/s (672 voice circuits)• OC-3 155.52 Mb/s (2430 voice circuits)• OC-12 622.08 Mb/s (9720 voice circuits) • OC-48 2488.32 Mb/s (19440 voice circuits) • OC-192 9953.28 Mb/s (38880 voice circuits)

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 27

Future Network Interface

l 1

l n

l -R

l -R R

S

S

S

...

CoreSwitching

EdgeSwitching

Access

l - BACKBONE

Fiber

Fiber

Copper

Copper...

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 28

Network

• Backbone fiber combines 16 OC-192 lines

• Each is given a different wavelength

• All data streams merged into single fiber

• Streams split by wavelength

• 16 OC-192 lines out

• Switches to TelCo customers

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 29

Optical-Data Conversion

LASER DIODECopper Fiber Copper

()

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 30

Optical Data Conversion

• Data on wire drives tunable laser

• Laser emits photon pulses

• Photons propagate down fiber

• Photon energy activates receiving diode

• Diode produces voltage or current

• Amplifier drives wire

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 31

Transmission Problems

• Photons lost at fiber coupling

• Photons lost in fiber due to scattering

• Photons per pulse deteriorates with length

• Repeater amplifiers needed

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 32

Optical-Data Link

LASER DIODECopper

FiberCopper

()Repeater

Fiber

()

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 33

More Problems

• Repeaters require external power

• Photons need conversion to voltage, amplification, and then reconversion to photons - data rate bottleneck!

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 34

Repeater for Fiber Optic Line

Diode LaserFiber

CopperFiber

()Amplifier

Copper

()

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 35

Wave Division Multiplexing

LaserLine 1

Line 2

Line n

...

Laser

Laser

WDM Fiber

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 36

Wave Division Multiplexing

• Incoming data converted to photons

• Photon streams have individual frequencies

• Streams can be merged onto single fiber

• Streams propagate without interference

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 37

WDM Problems

• Limited number of “colors” of photons– Fiber attenuation “windows”– Laser limitations (separation practicality)

• Repeaters must work on all “colors”

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 38

Repeaters for WDM

• Must amplify all photon “colors”

• Must not cause interaction between photon streams (intermodulation)

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 39

Pumped Laser Repeater

Pumped LaserFiber Fiber

() ()

Pump

Photon Energy

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 40

Pumped Laser Repeater

• Rare-earth doped glass

• Pumped by external light

• Photons receive excitation and are amplified

• Amplification of many photon “colors”

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 41

WDM De-multiplexing

• Photon stream split by “colors”

• Separated streams may be converted to voltage pulses

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 42

Wave Division De-Multiplexing

Line 1

Line 2

Line n

...WDM Fiber

DIODE

DIODE

DIODE

1

2

n

04/19/23 © 2012 Raymond P. Jefferis III Lect 02 - 43

WDM Routing

• Data streams must be switched

• Ideally this should be optical

• Optical switching of SONET frames?

• Electro-optics?

• State-of-the-art - developments taking place rapidly

top related