3 x 2 x secs 5 3 x 2 x secs 5 1 x 1 x ... - rollease acmeda

+1 203-590-5318

automateshades.com

ustechsupport@rolleaseacmeda.com

15

JOGx2

BEEPx3

MOTOR RESPONSE

SECS 5JOGx2

BEEPx3

MOTOR RESPONSE

SECS 5

JOGx1

BEEPx1

SECS 5

JOGx1

BEEPx1

JOGx2

BEEPx3

MOTOR RESPONSE

SECS 2JOGx1

BEEPx1

MOTOR RESPONSE

SECS 2

v 2020.03MK91-9999-AUTPOC

Group Automate shades by room and conveniently control them accordingly.

ROOMS

SCENES

TIMERS

MULTIPLE SHADE TYPES

Personalise shade control and organise how your shades operate by specific daily events.

Set and forget. Lower, raise and activate shade scenes automatically at the optimal time.

Awnings, Roller shades, External shades, Cellular ...Control every shade type from one screen.

2.Change motor direction

To reverse shade direction,hold both UP and DOWNuntil the motor responds.

1.Pair shadeto remoteSelect channel on controller.

Hold P1 buttonon motor head.

Release P1 buttonon motor head.

Hold STOP on controller.

3.Set top limit

To save upper limit,hold both UP and STOP.

Set lower limit

To save lower limit,hold both DOWN and STOP.To save lower limit,

hold both DOWN and STOP.

Hold both DOWN and STOP on controller.

Move shade to desired lowest position by pressing the DOWN arrow.

4.Adjust lower limit

Sunrise &Sunset Detection

VoiceControl

Home AutomationIntegration

LiveFeedback

JOGx1

BEEPx1

JOGx1

BEEPx1

JOGx2

BEEPx3

MOTOR RESPONSE

SECS5

JOGx1

BEEPx1SECS5

JOGx2

BEEPx3

MOTOR RESPONSE

JOGx2

BEEPx3

MOTOR RESPONSE

JOGx1

BEEPx1

JOGx1

BEEPx1

P2

JOGx1

BEEPx1

JOGx1

BEEPx1

JOGx2

BEEPx1

MOTOR RESPONSE

L UACTIVE PAIRING MODE

SLEEP MODE

REVERSE DIRECTION

RESET TO FACTORY SETTINGS

JOGx1SECS2

JOGx2SECS6

JOGx3SECS10

JOGx4

BEEPx4SECS14

JOGx1

BEEPx1

JOGx1

EXT. BEEPx1

SECS5

JOGx1

BEEPx1

JOGx2

BEEPx3

SECS5

v 2020.03MK91-9999-SHCPOC

Press UP on controller.

9.Lock Remote

8.Adjust Motor Speed

10.Hide Channels

To switch modes, holdright LOCK button for5 seconds.

Press P2 on controller.

Press UP on controller.

LCD displays “L” when locked,LCD displays “U” when unlocked.

LED solid on when lockedLED blinking when unlocked

For 1 CH

For 15 CH

Your multi channel remote can be configured to have anywhere between 1 or 15 visible channels. Inactive channels will not be visible when scrolling through the CH selection.

Continue to hold “CH” and press “UP” or “DOWN” to select channels

Press “STOP” to lock in

Press “STOP” and “CH”

11.Setting Modes

The P1 Button is utilized to administer motor configurations as described below.

Hold P1 button on motor head

Hold UP & DOWN on controller

Press STOP on controller

Hold UP & DOWN on controller

Press STOP on controller

12.Step ModeDefault motor mode is Roller after initial Limits have been set, use following steps to change to Step Mode.

If motor is in Step Mode, use following steps to change to Roller Mode

6.Set/Delete aFavorite Position

Press P2 on controller.

Press STOP on controller.

Press STOP on controller.

7.Create/Delete groups using P2

Press P2 on controller A.

Press P2 on controller A.

Press P2 on controller B.To save upper limit,hold both UP and STOP.

Hold both UP and STOP on controller.

*Not required for setup

*Not required for setup

*Not required for setup

*Not required for setup

*Not required for setup

*Not required for setup

*Not required for setup

*Not required for setup

Move shade to desired upper position by pressing the UP arrow.

5.Adjust upper limit