3 x 2 x secs 5 3 x 2 x secs 5 1 x 1 x ... - rollease acmeda
TRANSCRIPT
+1 203-590-5318
automateshades.com
15
JOGx2
BEEPx3
MOTOR RESPONSE
SECS 5JOGx2
BEEPx3
MOTOR RESPONSE
SECS 5
JOGx1
BEEPx1
SECS 5
JOGx1
BEEPx1
JOGx2
BEEPx3
MOTOR RESPONSE
SECS 2JOGx1
BEEPx1
MOTOR RESPONSE
SECS 2
v 2020.03MK91-9999-AUTPOC
Group Automate shades by room and conveniently control them accordingly.
ROOMS
SCENES
TIMERS
MULTIPLE SHADE TYPES
Personalise shade control and organise how your shades operate by specific daily events.
Set and forget. Lower, raise and activate shade scenes automatically at the optimal time.
Awnings, Roller shades, External shades, Cellular ...Control every shade type from one screen.
2.Change motor direction
To reverse shade direction,hold both UP and DOWNuntil the motor responds.
1.Pair shadeto remoteSelect channel on controller.
Hold P1 buttonon motor head.
Release P1 buttonon motor head.
Hold STOP on controller.
3.Set top limit
To save upper limit,hold both UP and STOP.
Set lower limit
To save lower limit,hold both DOWN and STOP.To save lower limit,
hold both DOWN and STOP.
Hold both DOWN and STOP on controller.
Move shade to desired lowest position by pressing the DOWN arrow.
4.Adjust lower limit
Sunrise &Sunset Detection
VoiceControl
Home AutomationIntegration
LiveFeedback
JOGx1
BEEPx1
JOGx1
BEEPx1
JOGx2
BEEPx3
MOTOR RESPONSE
SECS5
JOGx1
BEEPx1SECS5
JOGx2
BEEPx3
MOTOR RESPONSE
JOGx2
BEEPx3
MOTOR RESPONSE
JOGx1
BEEPx1
JOGx1
BEEPx1
P2
JOGx1
BEEPx1
JOGx1
BEEPx1
JOGx2
BEEPx1
MOTOR RESPONSE
L UACTIVE PAIRING MODE
SLEEP MODE
REVERSE DIRECTION
RESET TO FACTORY SETTINGS
JOGx1SECS2
JOGx2SECS6
JOGx3SECS10
JOGx4
BEEPx4SECS14
JOGx1
BEEPx1
JOGx1
EXT. BEEPx1
SECS5
JOGx1
BEEPx1
JOGx2
BEEPx3
SECS5
v 2020.03MK91-9999-SHCPOC
Press UP on controller.
9.Lock Remote
8.Adjust Motor Speed
10.Hide Channels
To switch modes, holdright LOCK button for5 seconds.
Press P2 on controller.
Press UP on controller.
LCD displays “L” when locked,LCD displays “U” when unlocked.
LED solid on when lockedLED blinking when unlocked
For 1 CH
For 15 CH
Your multi channel remote can be configured to have anywhere between 1 or 15 visible channels. Inactive channels will not be visible when scrolling through the CH selection.
Continue to hold “CH” and press “UP” or “DOWN” to select channels
Press “STOP” to lock in
Press “STOP” and “CH”
11.Setting Modes
The P1 Button is utilized to administer motor configurations as described below.
Hold P1 button on motor head
Hold UP & DOWN on controller
Press STOP on controller
Hold UP & DOWN on controller
Press STOP on controller
12.Step ModeDefault motor mode is Roller after initial Limits have been set, use following steps to change to Step Mode.
If motor is in Step Mode, use following steps to change to Roller Mode
6.Set/Delete aFavorite Position
Press P2 on controller.
Press STOP on controller.
Press STOP on controller.
7.Create/Delete groups using P2
Press P2 on controller A.
Press P2 on controller A.
Press P2 on controller B.To save upper limit,hold both UP and STOP.
Hold both UP and STOP on controller.
*Not required for setup
*Not required for setup
*Not required for setup
*Not required for setup
*Not required for setup
*Not required for setup
*Not required for setup
*Not required for setup
Move shade to desired upper position by pressing the UP arrow.
5.Adjust upper limit