106. nov 2008 / rh “pavement breaker” rosta-repair industrial products group 1 1 1- remove nut...

1106. Nov 2008 / RH

“Pavement Breaker”Rosta-RepairINDUSTRIAL PRODUCTS GROUPINDUSTRIAL PRODUCTS GROUP

1

1- Remove nut on left side handle (w/o switch) and remove the side handle.

2206. Nov 2008 / RH

“Pavement Breaker”Rosta-RepairINDUSTRIAL PRODUCTS GROUPINDUSTRIAL PRODUCTS GROUP

2

2- Remove the Rosta block

3306. Nov 2008 / RH

“Pavement Breaker”Rosta-RepairINDUSTRIAL PRODUCTS GROUPINDUSTRIAL PRODUCTS GROUP

3

3- Remove left handle together with the Rosta block.

4406. Nov 2008 / RH

“Pavement Breaker”Rosta-RepairINDUSTRIAL PRODUCTS GROUPINDUSTRIAL PRODUCTS GROUP

4

4- Drill M8 hole on main housing in this position and cut thread M8

5- Drill M8 hole on main housing in this position and cut thread M8

5

5506. Nov 2008 / RH

“Pavement Breaker”Rosta-RepairINDUSTRIAL PRODUCTS GROUPINDUSTRIAL PRODUCTS GROUP

6- Reassemble handles with nut (torque 40Nm)

6

6606. Nov 2008 / RH

“Pavement Breaker”Rosta-RepairINDUSTRIAL PRODUCTS GROUPINDUSTRIAL PRODUCTS GROUP

78

Part number of set screw 153576-00

7- Assemble set screw M8 with loctite (torque >10Nm) on left side

8- Assemble set screw M8 with loctite (torque >10Nm) on right side