05-aug-20061 basic welding symbols. 05-aug-20062 graphical symbols for welding to convey the...
Post on 16-Jan-2016
217 Views
Preview:
TRANSCRIPT
05-AUG-2006 1
BASIC WELDING SYMBOLS
05-AUG-2006 2
• Graphical symbols for welding to convey the complete welding information from
the designer to the welder in terms of drawings.
• It denotes a symbol made up of several elements to convey the welding instruction
WHAT IS A WELDING SYMBOL?
A metal-joining process that uses the heat generated by a combination of oxygen
and a fuel gas to melt two similar metals together and are integrally joined
when cooled.
WHAT IS WELDING?
WELD SYMBOLS: It is an ideograph ,used to indicate the type of weld required
05-AUG-2006 3
EIGHT ELEMENTS OF WELDING SYMBOLS
ARROW
BASIC WELD SYMBOLS
DIMENSIONS AND OTHER DATA
SUPPLEMENTARY SYMBOLS
COUNTER AND FINISH SYMBOLS
TAIL SPECIFICATIONS
PROCESS OR OTHER REFERENCE
REFERENCE LINE
05-AUG-2006 4
Reference line
Basics of the welding symbol
Other elements are oriented with respect to this line
Arrow
Arrow side
Other side-opposite side
Basic weld symbol
Indicates the type of welding to be performed
Placed on center of the reference line, either below or above or on both sides.
05-AUG-2006 5
Dimensions:
Length-Right
Size-Left
Spacing of the weld or weld symbols
If length is followed by Dash and another number –indicates center to center spacing of intermittent welds.
The number of spot or projection weld is enclosed in parentheses.
Supplementary Symbols:
Placed at the end of the reference line at the base of the arrow
Conveys additional information relative to the extent of welding, where the welding is to be performed.
05-AUG-2006 6
Counter and finish symbols:
The counter symbol is placed above or below the weld symbol
Finish symbol always appears above or below the counter symbol
Finish Symbols:
C-Chipping
G-Grinding
H-Hammering
M-Machining
G-Grinding
05-AUG-2006 7
Tail Specification:
It will appear on the end of the reference line opposite to the arrow end.
It is used to locate specification, process of other reference
If no tail-When no spec.
Specification and process:
Placed in the tail of the welding symbol
If the spec is given in notes, or indicated elsewhere on the drawing,
it should not be used.
05-AUG-2006 8
05-AUG-2006 9
REFERENCE LINE AND ARROW
05-AUG-2006 10
BASIC WELD SYMBOLS
SQUARE WELD
FILLET WELD
BEVEL
V-GROOVE
05-AUG-2006 11
FLARE BEVEL
FLARE-V
Continued….
05-AUG-2006 12
DIMENSIONS AND OTHER DATA
FILLET SIZE
FILLET LENGTH
IF THE FILLET LENGTH IS FOLLOWED BY A DASH AND A NUMBER ,i.e. CENTER-TO-CENTER DISTANCE OF INTERMITTENT WELDS.
GROOVE ANGLE
05-AUG-2006 13
WELD ALL AROUND
FIELD WELD
SUPPLEMENTARY SYMBOLS
05-AUG-2006 14
COUNTER AND FINISH SYMBOLS
FLUSH
CONVEX CONCAVE
05-AUG-2006 15
TAIL SPECIFICATIONS
05-AUG-2006 16
PROCESS OR OTHER REFERENCE
EBW STANDS FOR - ELECTRONIC BEAM WELDING
05-AUG-2006 17
FILLET WELD
ARROW SIDE
BOTH SIDES SAME FILLET SIZE
05-AUG-2006 18
BOTH SIDES WITH DIFF.FIILET SIZES
FIILET SIZE WITH LENGTH-INTERMITTENT WELD
05-AUG-2006 19
FILLET WELD ALL AROUND
top related