Amanda N. Pinson

Training Support Center

Training Aids Catalog

Casket

Full sized casket for training funeral detail

Advanced Land Nav (GTA)

Flip chart for Training land navigation

Compass, Mock-Up

Visual aid for Compass Training

Graves Registration Kit

The Graves Registration (GRREG) kit is a hands-on exportable device used to train and evaluate personnel in

graves registration operations and procedures.

Bullhorn

DVC#LFC-128-CAR

Portable bull horn that can be used on ranges, or anywhere voice amplification is needed.

Identification Board

Two dimensional plastic replica training board sets. These recognition boards will show actual dimensions of

the ordnance items, enhancing the Soldier's ability to recognize UXO hazards.

Cam Simulator

Provides realistic training for the CAM. Replicates system employment as closely as technology will permit.

Pugil Equipment

DVC#T07-107

Foam padded tubes that are 5 ½ in diameter. Training in one-on-one pugil techniques increase a Soldier's skill

in rifle-bayonet fighting, aggression and confidence. This training furnishes the fighter with an opponent who

can think, move, fight back, and (most importantly) make corrections. Safety equipment is also available.

EOF Module

This kit is used to train soldiers to interact with the local populations. The kit includes a Phraselator, Voice

Response Transmitter, Bullhorn, Searchlight, Restraints, and assorted support items.

IED Training Kit

Kit contains different types of Iraqi training munitions. The intent is that while training, a unit will be exposed

to a wide variety of IEDs. The munitions in the kit would be interchangeable to reflect the weapon of choice

used in the area of operation.

CO2 Mine

Provides effects signature when stepped on. Training is required for these devices.

Pressure Detonator Mine

The systems use CO2 and powder to give a signature for the explosion. Training is required to operate these

devices.

Inert Suicide Vest

A full-scale replica of a vest with inert pipe bombs, nails and nuts for shrapnel, and an alarm. this device will

alert the students when the trigger device is pressed.

Inert Suicide Bomber Kit

A briefcase that has inert pipe bombs with nails an nuts for shrapnel. the case has a dummy cell phone for a

trigger and an alarm that will alert the students when the case is opened.

Crew 2 Countermeasure System

This system is installed in the unit’s vehicles to replicate the Duke system. It has the same controls as the Duke

but does not interfere with normal commo. It does however, counter the TIED 2 system of IED trainers.

Training is required to operate these devices.

Crew 2 cm System / pda

This device is used to upload and download information from the CREW 2. Training is required to use this

device.

Crew 2 cm System / laptop

This device is used to create frequency sets for the CREW 2, and CVRJ trainers. It is also used to

IEDES NON-PYRO Set

The purpose of the IEDES 1 Training System is to provide visual and audio signature effects that realistically

replicate combat situations, in support of Explosive Hazard Defeat (EHD) training objectives. Training is

required to use this device.

9mm Plastic Pistol

Full-scale, three dimensional plastic replica of a U.S M9. This device can be used for drill and ceremony,

instruction, physical training, drown proofing, vehicle searches, op for players, and demonstrations.

M16A1 Plastic Weapon

Full-scale, three dimensional plastic replica of M16A1 rifle to be used for drown Proofing.

M4 Plastic Carbine

Full-scale, three dimensional plastic M4 Carbine. This device can be used for drill and ceremony instruction,

physical training, vehicle searches, op for players, and demonstrations.

AK-47 Mock Weapon

Full-scale, three dimensional plastic replica of an AK47, the most common weapon used by the opposing

forces. This device can be used for instruction, vehicle searches, op for players, and demonstrations.

PKM, Mock Weapon

Full-scale, three dimensional plastic replica of light Soviet machine gun. This device can be used for vehicle

searches, op for players, and demonstrations.

SVD Sniper Rifle

Full-scale, three dimensional plastic replicas of a Dragonov sniper rifle. This device can be used for instruction,

vehicle searches, op for players, and demonstrations.

RPK Squad Machine Gun

Full-scale, three dimensional plastic replica of a Soviet RPK. This device can be used for instruction, vehicle

searches, op for players, and demonstrations.

RPG-7 Launcher w/grenade

Full-scale, three dimensional plastic replicas of a RPG-7. This device can be used for ony instruction, vehicle

searches, op for players, and demonstrations.

AT-4 Inert Launcher

Inert tube for AT-4 training.

Pneumatic Machine Gun Simulator

The device provides simulated machine gun fire for training, thus adding realism to day or night training

maneuvers and conditioning soldiers to the sound and flash of weapons fire. They operate on oxygen and

propane.

Arty Simulator

The devices are noise simulators which can be used in all types of combat courses. They can be used to simulate

the noise of artillery and mortar fire, demolitions, and mines. They operate on oxygen and propane and remote

electric firing.

Riddle Sighting Device

Weapon training support device for use during basic rifle marksmanship training.

M15 Sighting Device

Weapon training support device for use during basic rifle marksmanship training.

Sighting Device

A metal frame that attaches to the rear of the M16A1/A2 rifle carrying handle. A piece of smoked plexiglass is

inserted in the frame to allow a coach to view the Soldier's aiming point.

Target Box Paddle

Soldiers practice with this device to insure that they can find the same aiming point each time they fire. Soldiers

look through the sights of a rifle, (in a cradle), and tell in which direction they need to move the paddle.

Shadow Box

A wooden crate device that provide a position cradle for firing and aiming the weapon.

120mm Training Round Heat

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in

handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service

projectiles.

120mm Canister Training Round

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in

handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service

projectiles.

120mm Sabot Training Round

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in

handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service

projectiles.

120mm Training Round, Heat-mp-t

Rounds are used by instructors to provide Soldiers training in ammunition identification, experience in

handling, and chamberiing of the sercie rounds in a manner to stress safety and avoid damage to service

projectiles.

M203 Plastic Inert Round

For the M203 Launcher

Crater Charge

Inert

Shape Charge, 40lb

INERT

Shape Charge, 15lb

INERT

C4 Blocks, M112

Inert

M605 Fuze

155mm Dummy Projectile

Anti-Personnel Breaching System

To provide the soldier with a classroom training aid as well as afield training aid for use in collective training

environment.

Sweep Monitoring System

The Sweep Monitoring System (SMS) is a training device for training any MOS that is currently required to

operate the AN/PSS-12. Device records and evaluates technique of operation of the mine sweeper.

Training Target Set

Mine target set for use with the SMS and unit owned mine sweepers.

UXO Bomb/Grenade

A set of plastic and metal replicas of explosive ordnance items for training purposes. The items are divided into

one of the four types: dropped, projected, thrown, and placed. They are designed to be used for classroom and

outdoor instruction for unexploded ordnance (UXO) training. The items will be issued separately; this is not

designed to be issued as a "package."

M15, Anti-Tank Mine

INERT

M16a1 Anti-Personnel Mine

INERT

M19, Anti-Tank Mine

INERT

M21 Anti-Tank Mine

INERT

Combination Mine

M-21 Mine with tilt rod set up.

Spider Training Device

This device is used for training on the SPYDER Device. (Coming soon)

CPR Manikin

Litter

Casualty Simulation Kit

Provides materials for realistically simulating many types of wounds incurred in battle or disaster. The materials

are used in training first aid to casualties.

IV Therapy Arm

To provide realistic practice in performing intravenous injections in the antecubital area and dorsum part of the

hand.

Nerve Agent Antidote Injection

Training MK-1 Kit

Body Part Wounds

Pnuemothorax Trainer

Basic model to be used for doing needle decompressions.

Islamic Headband/Scarf

Men’s Islamic Clothing

Women’s Dress, Islamic Abaya

Islamic Burqa

Islamic Woman Veil

Iraqi Police Shirt/Armband

CCMCK M4/M16 Bolt

Converts unit owned M-4/M16 to fire sim rounds (UTM) Ammo is available through the regular ammo supply

system. Face mask is required to draw UTM equipment.

M287 Launcher for AT-4 Weapon

Simulates operation and firing of the AT-4 Tactical Aniti-Tank Weapon. It allows a soldier to fire a 9mm tracer

bullet at stationary and moving armor targets. Available through the Central Training Company only..

Laser Marksmanship Training System (LMTS; 10 targets)

L-CATTS w/laptop

7 E-type and F-type targets on lifters Programmable for indoors or outdoors use.

Warrior Kit

6 large targets (TR-900), 6 small targets (TR-700), 1 machine gun target, and all accessories to conduct training

Engagement Skills Trainer (EST)

We have 10 classrooms of EST available to use. EST provides realistic training in Marksmanship, Collective

(force on force) and Shoot Don't Shoot Scenarios.

HMMWV Egress Assistance Trainer (HEAT)

The Heat is used to train soldiers to react and survive a vehicle roll over. It allows units to develop SOP's for

exiting the vehicle in various positions after the roll over.

Call For Fire Trainer (CFFT)

The CFFT provides realistic high fidelity virtual environments and intelligent friendly, opposing and non-

combatant simulated forces. The CFFT is designed to provide quality training for any MOS that needs to call

for indirect fire.

(Note: MILES Gear follows. Not all gear is on Fort Leonard Wood thus a 30 day request is required to ensure

the gear you want is available.)

IWS M4/M16 Kit

Kit consists of M14/M16 SAT, Halo, and H-Harness

IWS M249 SAT

Fits current issue M249

IWS M240 SAT

Fits M240 B

IWS M2 Transmitter

Fits .50 cal MG

IWS M107 Transmitter

Fits sniper rifle M107. It is part of the Sniper kit.

IWS M110 SAT

Fits sniper rifle M110. It is part of the Sniper kit.

IWS MAjIK

Used to zero IWS SATs

Legacy M16/M4 Transmitter, Halo/Torso

Legacy M249 and M240B Transmitter

Legacy M2 Machine Gun Transmitter

legacy M4/203 Transmitter

I-MILES UCD

Controller gun for all generations of MILES

I-MILES MCD

AT-4 SLM

RPG SLM

BFA 19 FOR .50 CAL MG

The device permits firing of blank .50 caliber ammunition with the M2 machine gun.

Small Arms Alignment Fixture (SAAF)

M2A3 PGS

VEHICLE MILES. Used on the M2A3/M3A3 vehicles for simulated gunnery or force on force training.

PGS Controller Gun

For use with PGS

PGS Scoring Device

MINI-RET

I-MILES WITS 113 Kit

Wireless kit for use on 113 family of vehicles, large trucks, light tracks.

I-MILES WITS Kit

Wireless kit for wheel vehicles comes with 2 kits per box.

TSV M2A3 Kit

Thru site video for M2/M3 A3 Bradley

TSV Scoring Device

JAVELIN Basic Skills Trainer

(Special order required) The BST is a three-dimensional training device used to train students and qualify

gunners on the Javelin weapon system.

TOW ITAS BST

Special order required Used for training ITAS gunners in a controlled environment

TOW ITAS FTS

Used for simulated ITAS gunnery as well as functions as ITAS TOW MILES

JAVELIN FTT

Used for simulated Javelin gunnery or for Javelin MILES.