aluminum fender kit for sut-200-s - trailex
TRANSCRIPT
![Page 1: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/1.jpg)
#22-000
ALUMINUM FENDER KIT FOR SUT-200-S
UNPACK AND IDENTIFY THE FOLLOWING PARTS.
2) Fenders 2) Fender braces 2) Angle brackets 2) Fender brace stiffeners
2) T-Bolts 4) 1” Bolts 2) 1 1/2” Bolt 2) Rubber washers 2) Steel washers 6) Small
washer 8) Nuts
![Page 2: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/2.jpg)
First remove plastic fender and wheel from both sides of axle assembly. Then attach two
vise grip pliers or suitable clamp as shown to hold axle assembly in place when removing
nuts.
Remove nuts and fender bracket. Nuts will be reinstalled on the new fender bracket.
![Page 3: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/3.jpg)
Install the angle bracket onto the bolts as shown.
Reinstall nuts on angle bracket and tighten nuts. At this point remove the vise grip pliers.
![Page 4: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/4.jpg)
Locate the fender brace 2) 1” bolts, 2) small washers and 2) nuts.
Insert the bolts and washers through the inside of the fender brace as shown.
![Page 5: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/5.jpg)
Insert bolts from fender brace into the holes on the angle bracket.
Install nuts and tighten.
![Page 6: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/6.jpg)
Locate fender brace stiffener, T-bolt and nut.
Install T-bolt and nut in brace as shown.
![Page 7: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/7.jpg)
Insert T-bolt from brace into the center slot in the top of the axle assembly.
Locate the fender, rubber washer, steel washers big and small, nut and 1 ½” bolt.
![Page 8: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/8.jpg)
Place rubber washer over hole on top of the fender.
Lay big washer down first then place small washer on top.
![Page 9: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/9.jpg)
Insert bolt through washer, fender and brackets.
Install nut on the underside of fender.
![Page 10: ALUMINUM FENDER KIT FOR SUT-200-S - Trailex](https://reader031.vdocuments.us/reader031/viewer/2022012518/619229db52ee6b2a1f28ecce/html5/thumbnails/10.jpg)
Position fender then tighten nuts in place.
KJM 6/18/10
Finished fender.