All Suture Anchor

with IntelliBraid Technology

Introduction Searching For a Better Option

IntelliBraid Technology

Without SC Technology

Self-Centering Technology

With SC Technology

12.0 mm

ICONIX 1

4.5 mm

3.0 mm

ICONIX 2,3,25

Measurements - Before

4.0 mm

8.0 mm

�e ICONIX family of anchors symolise the next generation of suture anchor technology. �e all suture based system allows for less bone removal during pilot hole creation without compromising pullout strength. �e innovation design is truly the �rst of its kind.

Competitive Advantages

• Four all suture configurations

• A completely all suture based implant made of HSS (Force Fiber) and a polyester sheath

• Helps eliminate the possibility of loose bodies in the joint due to anchor breakage

ICONIX 11 strand #2 Force FiberUse w/1.4mm instrumentation

ICONIX 22 strands #2 Force FiberUse w/2.3mm instrumentation

ICONIX 33 strands #2 Force Fiber Use w/2.3mm instrumentation

ICONIX 252 strands #5 Force FiberUse w/2.3mm instrumentation

• Smaller drill allows for minimal bone removal during pilot hole creation

• More anchors can be placed in smaller footprint

Typical3.0mm Drill Hole

ICONIX2.3mm Drill Hole

ICONIX1.4mm Drill Hole

Anchors

Pilot Hole

• The ICONIX Anchor System is intelligently sized and color coded to reduce risk of human error

Intelligent Design

2.3mm1.4mm

Competitive Advantages

• Smaller drill guides cause less damage to surrounding tissue

• Universal crown tips can be used on the face and rim of the glenoid

• Options when you need them

• The ICONIX Anchor System was specifically designed for both Rotator Cuff and Instability repairs, with curved and straight option guides

Rotator Cuff

Instability

Straight Short

Straight

12º

25º

2.3mm 1.4mm

Guides

Competitive Advantages• The ICONIX Anchor System is specifically designed for Hip FAI procedures with curved and straight guide options

• Designed to provide proper guide length during all FAI cases

• Directs anchor trajectory away from the acetabular socket

• Unique SLANT mouth helps place anchor closer to the acetabulum rim, allowing for a more anatomic repair

2.3mm 1.4mm12º Slant

25º Slant

3mm

Hip - FAI

TechniqueRotator Cuff

Instability

Hip - FAI

Take selected drill guide and place on bone in preferred position.

Insert the awl or drill into the drill guide and advance until positive stop is hit.

Insert anchor, lightly mallet to fully seat the anchor into the bone until positive stop is hit. Untether the suture from the inserter handle. Pull the anchor inserter handle. Pull on all sutures to set the anchor.

Take selected drill guide and place on bone in preferred position.

Insert the drill into the drill guide and advance until positive stop is hit.

Insert anchor, lightly mallet to fully seat the anchor into the bone until positive stop is hit. Untether the suture from the inserter handle. Pull the anchor inserter handle. Pull on all sutures to set the anchor.

(Instructions for Hip - FAI are same as for Instability)

Pull-out Strength1

Competitive Advantages

Stryker ICONIX 25

Stryker ICONIX 3

Stryker ICONIX 2

Stryker ICONIX 1

Biomet JuggerKnotsingle loaded

Linvatec Y-Knotsingle loaded

0 100 200 300 400 500 600

Anchor

Ultimate Pull-out Force (N)

One pound force is approximately equal to 4.5 Newtons

• Cannulated obturators help save time while gaining access to the hip joint

Cannulated Obturator

References:Tech Report # RD-12-080

PART NUMBER DESCRIPTION

3910-500-512

3910-500-522

3910-500-532

3910-500-525

3910-500-550

3910-500-551

3910-500-552

3910-500-553

3910-500-554

3910-500-555

3910-500-556

3910-500-557

3910-500-558

3910-500-559

3910-500-560

3910-500-561

Obturator3910-500-562

3910-500-563

3910-500-564

3910-500-565

Drills / Awl3910-500-568

3910-500-569

3910-500-571

3910-500-573

3910-500-574

Tray3910-500-575

ICO with IntelliBraid Technology Ancho with 1 stran Force Fiber

ICO with IntelliBraid Technology Anchor with 2 strands #2 Force Fiber

ICO with IntelliBraid Technology Anchor with 3 strands #2 Force Fiber

ICONIX 25 with IntelliBraid Technology Anchor with 2 strands #5 Force Fiber

ICONIX Straight Guide SHORT for 1.4mm anchor

ICONIX Straight Guide SHORT for 2.3mm anchor

ICONIX Straight Guide for 1.4mm anchor

ICONIX 12º Guide for 1.4mm anchor

ICONIX 25º Guide for 1.4mm anchor

ICONIX Straight Guide for 2.3mm anchor

ICONIX 12º Guide for 2.3mm anchor

ICONIX 25º Guide for 2.3mm anchor

ICONIX SLANT 12º Guide for 1.4mm anchor

ICONIX SLANT 25º Guide for 1.4mm anchor

ICONIX SLANT 12º Guide for 2.3mm anchor

ICONIX SLANT 25º Guide for 2.3mm anchor

ICONIX Pencil Tip Obturator SHORT for 1.4mm anchor

ICONIX Pencil Tip Obturator SHORT for 2.3mm anchor

ICONIX Trocar Tip Obturator for 1.4mm anchor

ICONIX Trocar Tip Obturator for 2.3mm anchor

ICONIX 1.4mm Disposable Drill

ICONIX 2.3mm Disposable Drill

ICONIX 1.4mm Reusable Straight Drill

ICONIX 2.3mm Reusable Straight Drill

ICONIX 2.3mm Reusable Awl

Multi-System Reusable Tray

Anchors

Guides

A surgeon must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that surgeons be trained in the use of any particular product before using it in surgery.

The information presented is intended to demonstrate the breadth of Stryker product offerings. A surgeon must always refer to the package insert, product label and/or instructions for use before using any Stryker product. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area.

Products referenced with ™ designation are trademarks of Stryker. Products referenced with ® designated are registered trademarks of Stryker. Copyright © 2014 Stryker. Printed in Australia.

Literature Number: LJPICX-BSSP MS/GS 09/12

Stryker Australia 8 Herbert Street, St Leonards NSW 2065 T: 61 2 9467 1000 F: 61 2 9467 1010

Stryker New Zealand515 Mt Wellington Highway, Mt Wellington Auckland T: 64 9 573 1890 F: 64 9 573 1891

For more information contact your local Stryker Sales Representative

www.stryker.com