all 9700 series suspensions are available with either fabricated … · 2019. 9. 17. · all 9700...
TRANSCRIPT
240
HUTCHENS H9700 and CH9700 SUSPENSIONSAll 9700 series suspensions areavailable with either fabricated or caststeel hangers and rockers. Thesehangers come in various styles.
T-S-H9700T-S-CH9700
Straddle Mount (Str/Mt)Straddle mount hangers are for use with box type frames.Each hanger straddles the frame and is welded to both sidesof the frame.
Fabricated (H) Cast (CH)
Under Mount Un/mt)Under Mount hangers arewelded flush to the bottomof the frame.
Side Mount (Si/mt)Side mount hangers arewelded to the side of theframe. They are useful onflatbed sliders and"maximum cube" vans.
Under Mount Weld-On(Un/mt/wo) orSide Mount Weld-On(Si/mt/wo)The versatile cast weld-onhangers can be used foreither under mount or sidemount applications.
Flange Mount (Fl/mt)Flange mount hangers may be welded or bolted to the frame,or a combination of bolting and welding maybe used.
CapacityThe 9700 series suspension has a Gross Axle Weight Rating (G.A.W.R.) of 22,400 lbs when equipped with single leaf,two leaf, standard three leaf and seven leaf springs. Heavy duty three leaf and eight leaf springs raise the G.A.W.R. to24,000 lbs.
6)mm5421("94)mm384( "91 1/2"***(165mm)
MountingHeight
H=61/2" (165mm) 431/2 (1105mm) 431/2 (1105mm) H=*CH=61/8 )mm15("2=HC)mm651("
Standard Overslung Suspension with standard 49 inch axle centers
Standard Underslung Suspension with standard 49 inch axle centersH=61/2" (165mm) 431/2 (1105mm) 431/2 (1105mm) H=*CH=61/8 )mm15("2=HC)mm651("
(165mm)6)mm5421("94)mm384( "91 1/2"***
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm) **Ref.: This dimension may vary with changes in springs, spring seatheights, etc. ***Recommended spring clearance.
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm) **Ref.: This dimension may vary with changes in springs,spring seat heights, etc. ***Recommended spring clearance.
Hutchens suspensions with axle spacings other than 49" are covered in other pages of this catalog.
MountingHeight
241
Ordering a 9700 Series Suspension SystemThe following options need to be considered when ordering a "Hutch" 9700 Series suspension:
1. The number of axles - on a tandem, standard axle spacing is 49" unless otherwise specified.2. Choose the type of hanger. (See hanger types in this catalog.)
Specify fabricated (H) or cast (CH).3. Determine the mounting height you need. A mounting height chart is shown below.
Mounting height depends onSuspension configuration - Overslung for standard range of mountingheights; Underslung for when lower mounting heights are required.Axle size - 5 inch round is considered standard.Spring Seat Height: Available in heights from 3/4" to 4-3/4" in 1/2" increments.Spring Type. Consideration is given to number of leaves and arch, standard or heavyduty. The spring seat height and the spring determine the length of u-bolts required.
4. Choose u-bolt diameter - 7/8" is standard, 3/4" is optional.
Other Options:
HUTCHENS 9700 SERIES SUSPENSIONS IN STOCKUnless specified otherwise, all stocked suspensions are for 5" round axles.
Springs are not included. Mounting heights are based on the use of standard 354-00 springs.On tandem suspensions, axle centers are 49" unless specified otherwise.
Rocker andCenter Hanger FastenerStandard Huck Fastener (Shown)Optional 1-1/8" X 7"
Capscrew and Nut
OptionalNo-Hop Attach FittingRear Axle OnlyPrevents axle "hop" whenbraking with empty trailer.
HUTCHENS H9700 and CH9700 SUSPENSIONS
Single Axle SuspensionsMounting
Part Number Description HeightT-S-H9700S-ST/B Straddle mount hangers, for 5" round axle, with 12" u-bolts 15.75"T-S-H9700S-U/B Under mount hangers, for 5" round axle, with 12" u-bolts 15.75"
Tandem Axle Suspensions, 5" Round AxlesT-S-H9700T-UM/B Undermount hangers, for 5" round axles, with 12" u-bolts 16.00"
T-S-H9700T-FL-3/4 Flange mount hangers, for 5" round axles, with 12" u-bolts 16.00"
T-S-H9700T-ST/B Straddle mount hangers, for 5" round axles, with 12" u-bolts 16.00"
Underslung SuspensionsSingle Axle
T-S-H9700S-US/UM/B Undermount hangers, under slung, for 5" round axles, 6.75"
Tandem AxleT-S-H9700T-US/UM/B Under mount hangers, underslung for 5" round axles, 7.00"
with 12" u-bolts
Tandem Axle Suspensions, 5" Round Axles, 44" Axle Centers
T-S-H9700T-UM-44AC Undermount hangers, for 5" round axles, with 12" u-bolts 14.125"
242
H9700 and CH9700 Suspensions With Optional 42-1/2" and 44" Axle Centers
SpringAss'y Spring Seat Height in Inches 3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4
T-S-TRA-2717-SP Mounting Height in Inches 141/8 145/8 151/8 155/8 161/8 165/8 171/8 175/8 181/8(6 Leaf) U-Bolt Length in Inches* 11 12 12 13 13 14 14 15 15
Spring Seat Height in Inches 3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4T-S-TRA-026 Mounting Height in Inches 131/4 133/4 141/4 143/4 151/4 153/4 161/4 163/4 171/4(Single Leaf) U-Bolt Length in Inches* 10 10 11 11 12 12 13 13 14
*U-bolt part numbers beginning with "7/8X3X"--
SpringAss'y Spring Seat Height in Inches 3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4
T-S-TRA2717-SP Mounting Height in Inches 141/8 145/8 151/8 155/8 161/8 165/8 171/8 175/8 181/8(6 Leaf) U-Bolt Length in Inches* 12 13 13 14 14 15 15 16 17
Spring Seat Height in Inches 3/4 1-1/4 1-3/4 2-1/4 2-3/4 3-1/4 3-3/4 4-1/4 4-3/4T-S-TRA026 Mounting Height in Inches 131/4 133/4 141/4 143/4 151/4 153/4 161/4 163/4 171/4(Single Leaf) U-Bolt Length in Inches* 11 12 12 12 13 14 14 15 15
5 Inch Square Axle
5 Inch Round Axle
*U-bolt part numbers beginning with "7/8X3X"--
Mounting Heights and U-Bolt Lengths For Suspensions With 421/2" and 44" Axle Centers
HUTCHENS H9700 and CH9700 SUSPENSIONS
421/2" A/C=37" 421/2" A/C=37"44" A/C=36" 44" A/C=36"
421/2" Axle CentersOn the Overslung, Underslung and Inverted U-bolts, H and CH-9700 series suspensions with 421/2" axle centers. Theparts not interchangeable with the standard 49" axle center models are as follows:
Item Part No. Quantity Description1&5 T-S-16398-02* 2 Adj. radius rod with bushing - 16" long.1&5 T-S-16398-01* 2 Adj. radius rod with bushing - 14" long.
2 T-S-See Below 8 U-bolts3 T-S-See Below 4 Spring Assembly
44" Axle CentersOn the Overslung, Underslung and Inverted U-bolts, H and CH-9700 series suspensions with 44" axle centers, theparts not interchangeable with the standard 49" axle center models are as follows:
*On the 42-1/2"and 44" A/C models all radius rods are adjustable.
Item Part No. Quantity Description1 T-S-16398-01 4 Adj. Radius Rod With Bushing - 14" C/C2 See Below 8 U-bolts3 See Below 4 Spring Assembly4 T-S-16159-01 2 Rocker with Rubber BushingFor use with TRA2717-SP Spring Ass'y.
T-S-16159-03 2 Rocker with Rubber BushingFor use with TRA026 Spring Ass'y.
5 T-S-16398-03 2 Adj. Radius Rod With Bushing - 16.62" C/C
3 4 3 51
2
421/2" A/C44" A/C
2
243
HUTCHENS H9700 and CH9700 SUSPENSIONS
12
13
14
45
6
1
9
Cast(CH)
Fabricated(H)
Cast (CH)
Cast(CH)
Fabricated(H)
1817
16
7
No-Hop Option(See Chart)
Rear Axle Only
19
5
2028
2527
2322
21
24 25 26
Fabricated(H)
H=61/2" (165mm) 431/2 (1105mm) 431/2 (1105mm) H=*CH=61/8 )mm15("2=HC)mm651("
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm)** Ref.: This dimension may vary with changes in springs,
spring seat heights, etc.*** Recommended spring clearance.
(165mm)6)mm5421("94)mm384( "91 1/2"***
2
19
H9700 and CH9700
11
10
8
7
10
9
11
12
13
144
156
8
7
3
21
2223
244
QuantityItem Part No. Single Tandem Description
Axle Axle1 See Hanger Chart A This Page 2 2 Front Spring Hanger2 See Hanger Chart A This Page 0 2 Center Rock/Rocker Hanger Assembly3 See hanger Chart A This Page 2 2 Rear Spring Hanger Assembly
8420-91T-S-74 Radius Rod Bolt - 1-14-UNS x 55 T-S-16398-04 1 2 Radius Rod With Bushing - 19.25 Long6 T-S-10562-00 4 8 Flange Locknut - 1-14UNS, GR,F, Cad Pl.7 See U-Bolt Chart B Page 191 4 8 U-Bolt - Std. 0.875 U-Bolt8 T-S-16868-01 2 4 Top Plate9 T-S-17350-02 2 4 Galvanized Spring Liner, 3.00" x 7.50"10 See Spring Pages 160-165 2 4 Spring Assembly - Std. 3 Leaf (Shown)11 See Spring Seat Chart C This Page 2 4 Spring Seat 5" Round (Shown)12 See Bottom Plate Chart D Page 191 2 4 Bottom Plate, 5" Round, (Shown)
61800-5T-S-331 Washer-Pl, 15/16 ID x 1-3/4 OD (For Std. .875 U-Bolt)or T-S-817-00 8 16 Washer - 1/8 x 13/16 ID x 1-1/2 OD (For Opt. .75 U- Bolt)
14 T-S-34-04 or 8 16 Hex Nut - 7/8"-14UNF (For .875 U-Bolt Shown)T-S-16303-01 8 16 Hex Nut - 3/4"-16UNF (For Optional .75 U-Bolt)
2100-51T-S-751 Nonadjustable Radius Rod With Bushing16 See No-Hop Chart E Page 191 0 2 Spring Seat - Replaces rear Spring Seat Only17 See No-Hop Chart E Page 191 0 2 Attach Fitting - Replaces Rear Bottom Plate Only18 See No-Hop Chart E Page 191 0 2 Adjustable Rad. Rod W/Bushing - Replaces 1 adjustable
and 1 nonadjustable radius rod on rear axle only.19 T-S-7717-01 2 Per Hanger Washer Bushing - Replaces side plate washer 10561-00
on fabricated front and center hangers only. 200-22T-S-702 Per Radius Rod Radius Rod Bushing Only - 3" Long
230-7T-S-312 Per Rocker Hex Lock Nut, 5/8-18UNF Gr. B (Shipped loose,1 Per Rear Hanger not part of center rock and hanger ass'y.
However it is part of rear hanger assembly.)SrekcoR reP 200-65T-S-722 leeve Spacer - 3/4 OD x 18 ga. x 3-1/4 long.
1 Per Rear Hanger Shipped loose, not part of center rock and hanger ass'y.However it is part of rear hanger assembly.)
rekcoR reP 200-95T-S-732 Hex Bolt - 5/8-18UNF x 4-1/2Lg., Gr 2 - (Shipped loose,1 Per Rear Hangernot part of center rock and hanger ass'y. However it is
part of rear hanger assembly.)24 T-S-11154-00 1 Per Rocker Hex Lock Nut - 1-1/8-7UNC, GR5
rekcoR reP 200-73T-S-852 Washer - 1/8 x 1-1/4 ID x 2-1/4 OD26 T-S-16158-01 Fabricated Rocker Assy w/Rubber Bushing (Shown)
T-S-16290-01 Cast Rocker Assembly w/Rubber Bushing (Not Shown)27 T-S-16146-01 1 Per Rocker Rocker Bushing Only - Rubber28 T-S-16150-01 1 Per Rocker Hex Cap Screw - 1-1/8" - 7 x 6.62" Lg., GR 5
HUTCHENS H-9700 and CH9700 SUSPENSIONS
SPRING SEAT CHART C - Part No. Pre-Fix T-S-Seat Height 3/4 11/4 13/4 21/4 2 3/4 31/4 33/4 41/4 43/4
5" Round 19360-01 19360-02 19360-03 19360-04 19360-05 19360-06 19360-07 19360-08 19360-095" X 5" Square 19365-01 19365-02 19365-03 19365-04 19365-05 19365-06 19365-07 19365-08 19365-094" X 6" Rect. 19364-01 19364-02 19364-03 19364-04 19364-05 19364-06 19364-07 19364-08 19364-09
HANGER CHART A (Fabricated (H) and Cast (CH) Hangers)Description Part No. Str/Mt Un/Mt Side/Mt Fl/Mt/BoFront Hgr., Fab (H) T-S-7701- -01 -02 L-03 R-04 L-07 R-08Front Hgr., Cast (CH) 702-01 L 16291-03 L 16291-03 L 702-11
R 16291-04 R 16291-04 R 702-12Rocker & Hgr. Assy., Fab. (H) T-S-16319- -01 -02 -04 -07Rocker & Hgr. Assy., Cast (CH) T-S-16319- -51 -52 -52 -57Rocker Hgr. Only, Fab (H) 16169-01 16171-01 16175-01 16178-01Rocker Hgr. Only, Cast (CH) 16196-03 16197-03 16197-03 16199-03Rear Hgr. Assy., Fab. (H) T-S-7703- -01 20732-01 20733-01 20734-04 L-07 R-08Rear Hgr. Assy., Cast (CH) 712-01 L 16293-01 L 16293-01 L 712-11
R 16293-02 R 16293-02 R 712-12
245
H=61/2" (165mm) 431/2 (1105mm) 431/2 (1105mm) H=*CH=61/8 )mm15("2=HC)mm651("
(165mm)6)mm5421("94)mm384( "91 1/2"***
4
9
8
1
7
12
13
65
4
10
11
Cast(CH)
Fabricated(H)
11
12
13
9
8
146
10
2
7
H9700US and CH9700US
5
1725
2224
2019
18
21 22 23
19
19 Cast (CH)Fabricated
(H)
Cast (CH)Fabricated(H)
HUTCHENS UNDERSLUNG H9700 and CH9700 SUSPENSIONS
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm)** Ref.: This dimension may vary with changes in springs,
spring seat heights, etc.*** Recommended spring clearance.
3
18
1920
246
HUTCHENS UNDERSLUNG H9700US and CH9700US
HANGER CHART A (Fabricated (H) and Cast (CH) Hangers)Description Part No. Str/Mt Un/Mt Side/Mt Fl/Mt/BoFront Hgr., Fab (H) T-S-7701- -01 -02 L-03 R-04 L-07 R-08Front Hgr., Cast (CH) 702-01 L 16291-03 L 16291-03 L 702-11
R y R 16291-04 R 702-12Rocker & Hgr. Assy., Fab. (H) T-S-16319- -01 -02 -04 -07Rocker & Hgr. Assy., Cast (CH) T-S-16319- -51 -52 -52 -57Rocker Hgr. Only, Fab (H) 16169-01 16171-01 16175-01 16178-01Rocker Hgr. Only, Cast (CH) 16196-03 16197-03 16197-03 16199-03Rear Hgr. Assy., Fab. (H) T-S-7703- -01 20732-01 20733-01 20734-04 L-07 R-08Rear Hgr. Assy., Cast (CH) 712-01 L y L 16293-01 L 712-11
R 16293-02 R 16293-02 R 712-12
Seat Height 3/4 11/4 13/4 21/4 23/4 31/4 33/4 41/4 43/45" Round 301-01 301-02 301-03 301-04 NR -- -- -- --
5" X 5" Square 7759-01 7759-02 7759-03 7759-04 NR -- -- -- --4" X 6" Rect. NR 7727-02 7727-03 7727-04 NR -- -- -- - -
QuantityItem Part No. Single Tandem Description
Axle Axle1 See Hanger Chart A This Page 2 2 Front Spring Hanger2 See Hanger Chart A This Page 0 2 Center Rock/Rocker Hanger Assembly3 See hanger Chart A This Page 2 2 Rear Spring Hanger Assembly
8420-91T-S-74 Radius Rod Bolt - 1-14-UNS x 55 16398-04 1 2 Radius Rod With Bushing - 19.25 Long6 10562-00 4 8 Flange Locknut - 1-14UNS, GR,F, Cad Pl.7 See U-Bolt Chart F Page 191 4 8 U-Bolt - Std. 0.875 U-Bolt8 See Spring Seat Chart G This Page 2 4 Spring Seat 5" Round (Shown)9 17350-02 2 4 Galvanized Spring Liner, 3.00" x 7.50"10 See Spring Pages 160-165 2 4 Spring Assembly - Std. 3 Leaf (Shown)
4210-60711 Bottom Plate Att.61800-5321 Washer-Pl, 15/16 ID x 1-3/4 OD (For Std. .875 U-Bolt)
or T-S-817-00 8 16 Washer - 1/8 x 13/16 ID x 1-1/2 OD (For Opt. .75 U- Bolt))nwohS tloB-U 578. roF( FNU41-"8/7 - tuN xeH618ro 40-4331
16303-01 8 16 Hex Nut - 3/4"-16UNF (For Optional .75 U-Bolt)2100-51741 Nonadjustable Radius Rod With Bushing
210-717761 Per Hanger Washer Bushing - Replaces side plate washer10561-00 on fabricated front and center hangers only.
17 722-00 2 Per Radius Rod Radius Rod Bushing Only - 3" Long 230-7381 Per Rocker Hex Lock Nut, 5/8-18UNF Gr. B (Shipped loose,
1 Per Rear Hanger not part of center rock and hanger ass'y.However it is part of rear hanger assembly.)
rekcoR reP 200-65791 Sleeve Spacer - 3/4 OD x 18 ga. x 3-1/4 long. (Shipped1 Per Rear Hanger loose, not part of center rock and hanger ass'y.
However it is part of rear hanger assembly.)rekcoR reP 200-95702 Hex Bolt - 5/8-18UNF x 4-1/2Lg., Gr 2 - (Shipped
1 Per Rear Hanger loose, not part of center rock and hanger ass'y.However it is part of rear hanger assembly.)
reP 100-4511112 Rocker Hex Lock Nut - 1-1/8-7UNC, GR5rekcoR reP 200-73822 Washer - 1/8 x 1-1/4 ID x 2-1/4 OD
23 16158-01 Fabricated Rocker Assy w/Rubber Bushing (Shown)16290-01 Cast Rocker Assembly w/Rubber Bushing (Not Shown)
110-6416142 Per Rocker Rocker Bushing Only - Rubber 110-0516152 Per Rocker Hex Cap Screw - 1-1/8" - 7 x 6.62" Lg., GR 5
T-S-T-S-
T-S-
T-S-T-S-
T-S-T-S-T-S-T-S-
T-S-T-S-
T-S-
T-S-
T-S-T-S-T-S-T-S-T-S-T-S-
247
HUTCHENS H9700 and CH9700 SUSPENSIONS w/INVERTED U-BOLTS
45
6
1
10
Cast(CH)
Fabricated(H)
Cast (CH)
Cast(CH)
Fabricated(H)
16
5
1725
2224
2019
18
21 22 23
Fabricated(H)
H=61/2" (165mm) 431/2 (1105mm) 431/2 (1105mm) H=*CH=61/8 )mm15("2=HC)mm651("
(165mm)6)mm5421("94)mm384( "91 1/2"***
2
16
12
11
11
10
12
414
6
H9700 and CH9700
7
8
9
13
7
8
9
13
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm)** Ref.: This dimension may vary with changes in springs,
spring seat heights, etc.*** Recommended spring clearance.
TOP PLATE CHART GAxle Size Part No.5" Round T-S-9202-005" X 5" Square T-S-9202-00
3
18
1920
248
QuantityItem Part No. Single Tandem Description
Axle Axle1 See Hanger Chart A Page 184 2 2 Front Spring Hanger2 See Hanger Chart A Page 184 0 2 Center Rock/Rocker Hanger Assembly3 See hanger Chart A Page 184 2 2 Rear Spring Hanger Assembly4 T-S-719-02 4 8 Radius Rod Bolt - 1-14-UNS x 55 T-S-16398-04 1 2 Radius Rod With Bushing - 19.25 Long6 T-S-10562-00 4 8 Flange Locknut - 1-14UNS, GR, F, Cad Pl.7 T-S-34-04 or 8 16 Hex Nut - 7/8"-14UNF (For .875 U-Bolt Shown)
T-S-16303-01 8 16 Hex Nut - 3/4"-16UNF (For Optional .75 U-Bolt)8 T-S-35-00 8 16 Washer-Pl, 15/16 ID x 1-3/4 OD (For Std. .875 U-Bolt)
or T-S-817-00 8 16 Washer - 1/8 x 13/16 ID x 1-1/2 OD (For Opt. .75 U- Bolt)9 See Top Plate Chart G Page 187 2 4 Top Plate10 T-S-17350-02 2 4 Galvanized Spring Liner, 3.00" x 7.50"11 See Spring Pages 160-165 2 4 Spring Assembly - Standard 3 leaf (Shown)12 See Spring Seat Chart C Page 184 2 4 Spring Seat, 5" Round, (Shown)13 See U-Bolt Chart H This Page 4 8 U-Bolt - Std. 0.875 U-Bolt14 T-S-715-00 1 2 Nonadjustable Radius Rod With Bushing16 T-S-7717-01 2 Per Hanger Washer Bushing - replaces side plate washer 10561-00
on fabricated front and center hangers only.17 T-S-722-00 2 Per Radius Rod Radius Rod Bushing Only - 3" Long
2 Per Rocker Hex Lock Nut, 5/8-18UNF Gr. B (Shipped loose,1 Per Rear Hanger not part of center rock and hanger ass'y.
However it is part of rear hanger assembly.)19 T-S-3756-00 2 Per Rocker Sleeve Spacer - 3/4 OD x 18 ga. x 3-1/4 long. (Shipped
1 Per Rear Hanger loose, not part of center rock and hanger ass'y.However it is part of rear hanger assembly.)
20 T-S-3759-00 2 Per Rocker Hex Bolt - 5/8-18UNF x 4-1/2Lg., Gr 2 - (Shipped1 Per Rear Hanger loose, not part of center rock and hanger ass'y.
However it is part of rear hanger assembly.)21 T-S-311154-00 1 Per Rocker Hex Lock Nut - 1-1/8-7UNC, GR522 T-S-3837-00 2 Per Rocker Washer - 1/8 x 1-1/4 ID x 2-1/4 OD23 T-S-316158-01 Fabricated Rocker Assy w/Rubber Bushing (Shown)
T-S-316290-01 Cast Rocker Assembly w/Rubber Bushing (Not Shown)24 T-S-316146-01 1 Per Rocker Rocker Bushing Only - Rubber25 T-S-316150-01 1 Per Rocker Hex Cap Screw - 1-1/8" - 7 x 6.62" Lg., GR 5
HUTCHENS H9700 and CH9700 SUSPENSIONS w/INVERTED U-BOLTS
U-BOLT CHART H5" Round Axle
U-bolt lengths necessary for variousseat height - spring combinations
7/8" Diameter x 5" Round 7816-(See Length Below)Single Two Three Seven Eight
Seat Leaf Lgth leaf Lgth Leaf Lgth Leaf Lgth Leaf LgthHeight Spring Spring Spring Spring Spring
3/4 -05 91/4 -06 93/4 -07 101/4 -09 111/4 -10 113/411/4 -06 93/4 -07 101/4 -08 103/4 -10 113/4 -11 121/413/4 -07 101/4 -08 103/4 -09 111/4 -11 121/4 -12 123/421/4 -08 103/4 -09 111/4 -10 113/4 -12 123/4 -13 131/423/4 -09 111/4 -10 113/4 -11 121/4 -13 131/4 -14 133/431/4 -10 113/4 -11 121/4 -12 123/4 -14 133/4 -15 141/433/4 -11 121/4 -12 123/4 -13 131/4 -15 141/4 -16 143/441/4 -12 123/4 -13 131/4 -14 133/4 -16 143/4 -17 151/443/4 -13 131/4 -14 133/4 -15 141/4 -17 151/4 -18 153/4
U-BOLT CHART H5" Square Axle
U-bolt lengths necessary for variousseat height - spring combinations
7/8" Diameter x 5" Square 7840-(See Length Below)Single Two Three Seven Eight
Seat Leaf Lgth leaf Lgth Leaf Lgth Leaf Lgth Leaf LgthHeight Spring Spring Spring Spring Spring
3/4 -01 91/4 -02 93/4 -03 101/4 -05 111/4 -06 113/411/4 -02 93/4 -03 101/4 -04 103/4 -06 113/4 -07 121/413/4 -03 101/4 -04 103/4 -05 111/4 -07 121/4 -08 123/421/4 -04 103/4 -05 111/4 -06 113/4 -08 123/4 -09 131/423/4 -05 111/4 -16 113/4 -07 121/4 -09 131/4 -10 133/431/4 -06 113/4 -07 121/4 -08 123/4 -10 133/4 -11 141/433/4 -07 121/4 -08 123/4 -09 131/4 -11 141/4 -12 143/441/4 -08 123/4 -09 131/4 -10 133/4 -12 143/4 -13 151/443/4 -09 131/4 -10 133/4 -11 141/4 -13 151/4 -14 153/4
249
HUTCHENS H9700 and CH9700 109" WIDESPREAD SUSPENSIONS
H=6.56" *H"05.37"05.37CH=6.13" CH 2"
19"**
6.5"***
109.00"
160.00" (109" Axle Spacing)
2
4
3
17
21
20
2324
22
Cast(CH)
Fabricated(H)
12
11
10
9
18
19
15
16
14
15
16
67
8
1
11
Cast(CH)
Fabricated(H)
20
13
12
10
9
H9700and
CH9700TWS109"
Axle Spacing
22
2324
2526
2726
28
29
* Str/Mt-31/2"(89mm), Un/mt & Si/mt=37/8"(99mm), Fl/mt-51/2"(140mm)** Ref.: This dimension may vary with changes in springs,
spring seat heights, etc.*** Recommended spring clearance. 5
250
QuantityItem Part No. Tandem Axle Description
1 See Hanger Chart H, This Page 2 Front Spring Hanger2 See Hanger Chart H, This Page 2 Front Beam Guide - (Optional)3 See Hanger Chart H, This Page 2 Center Rocker/Rocker Hanger Ass'y4 See Hanger Chart H, This Page 2 Rear Beam Guide - Att.5 See Hanger Chart H, This Page 2 Rear Spring Hanger Ass'y
820-91T-S-76 Radius Rod Bolt - Hex Bolt - 1-14-UNS x 5100-51T-S-77 Non-adj. Rad. Rod w/Bushing, 19.25 lg, Frt Curbside (RH) Only800-2650T-S-18 Flange Locknut - 1-14UNS, GR,F, Cad Pl.
9 See U-Bolt Chart B, Page 188 8 U-Bolt - Std. 0.875 U-Bolt (Shown) poT410-8686T-S-101 Plate
420-0537T-S-111 Galvanized Spring Liner, 3.00" x 7.50"12 See Spring Pages 160-165 4 Spring Assembly - Standard 3 leaf (Shown)13 Spring Seat Chart C Page 184 2 Spring Seat, 5" Round, (Shown)14 Bottom Plate Chart D page 191 2 Bottom Plate - 5" Round (Shown)
6100-5T-S-351 Washer-Pl, 15/16 ID x 1-3/4 OD (For Std. .875 U-Bolt)6100-71T-S-8 ro Washer - 1/8 X 13/16 ID x 1-1/2 OD (For Opt. .75 U- Bolt)
)nwohS tloB-U 578. roF( FNU41-"8/7 - tuN xeH61ro 40-4T-S-3616110-3036T-S-1 Hex Nut - 3/4"-16UNF (For Optional .75 U-Bolt)140-8936T-S-171 Adj. Radius Rod w/Bushing-19.25 Lg.- Front Roadside (LH) Only2 Rear, Both Sides (LH & RH) When Using 5" Round Axles271-8936T-S-1 Adj. Radius Rod w/Bushing-17 Lg. Adj. to 17-1/4, Both Rear
Sides (LH & RH) When Using 5"x5" Square or 4"x6" Rect.18 No-Hop Option N/A for TWS 2 Spring Seat, 5" Round, (Shown)19 No-Hop Option N/A for TWS 2 Attach Fitting20 T-S-7717-01 2 Per Hanger Washer Bushing - Replaces side plate washer 10561-00 on
fabricated front and center hangers only.21 T-S-722-00 2 Per Radius Rod Radius Rod Bushing Only - 3" Lg.22 T-S-37-03 2 Per Rocker Hex Lock Nut, 5/8-18UNF Gr. B (Shipped loose, not part of
1 Per Rear Hanger center rock and hanger ass'y.However it is part of rear hanger assembly.)
23 T-S-756-00 2 Per Rocker Sleeve Spacer - 3/4 OD x 18 ga. x 3-1/4 long. (Shipped loose,1 Per Rear Hanger not part of center rock and hanger ass'y.
However it is part of rear hanger assembly.)24 T-S-759-00 2 Per Rocker Hex Bolt - 5/8-18UNF x 4-1/2Lg., Gr 2 - (Shipped loose,
1 Per Rear Hanger not part of center rock and hanger ass'y.However it is part of rear hanger assembly.)
25 T-S-11154-00 1 Per Rocker Hex Lock Nut - 1 1/8-7UNC, GR 526 T-S-837-00 2 Per Rocker Washer - 1/8 x 1 1/4 ID x 2 1/4 OD27 T-S-16146-01 1 Per Rocker Rocker Bushing Only - Rubber28 T-S-16150-01 1 Per Rocker Hex Cap Screw - 1-1/8" - 7 x 6.62" Lg., GR 5
201-8616T-S-192 Fabricated Rocker Assy, w/Rubber Bushing, 109" Axle Spacing
HUTCHENS H9700 and CH9700 109" WIDESPREAD SUSPENSIONS
HANGER CHART H (Fabricated (H) and Cast (CH) Hangers)Description Part No. Str/Mt Un/Mt Side/Mt Fl/Mt/BoFront Hgr., Fab (H) T-S-7701- -01 -02 T-S-L-03 R-04 T-S-L-07 R-08Rear Beam Guide, Fab. (H) T-S-7707- -13* -14 N/A N/ACenter Rocker & Hanger Ass'y (109) T-S-16457* -01* -03* N/A N/ARocker Hgr. Only, Fab (H) T-S-16184-01* T-S-16185-01 N/A N/ARocker Hgr. Only, Cast (CH) T-S-16639-03* T-S-16640-03* N/A T-S-16641-03*Rear Hgr. Assy., Fab. (H) T-S-7703- -01 T-S-20732-01 T-S-20733-01 T-S-20734-01 T-S-L-07 R-08Rear Hgr. Assy., Cast (CH) T-S-712-01 T-S-L 16293-01 T-S-L 16293-01 T-S-L 712-11
T-S-R 16293-02 T-S-R 16293-02 T-S-R 712-12*Not a stocked item.
251
5 x 5 Inch Square AxleSeat Radius Attach
Height Rod Fitting Seat3/4" T-S-16398-04 T-S-7738-01 T-S-7759-0111/4" T-S-16398-04 T-S-7738-01 T-S-7759-0213/4" T-S-16398-04 T-S-7738-01 T-S-7759-0321/4" T-S-16398-04 T-S-7738-01 T-S-7759-04
U-BOLT CHART B5" Round Axle
U-bolt lengths necessary for variousseat height - spring combinations
7/8" Dia. Std. x 3" Round 7040-(See Length Below)3/4" Dia. Opt. x 3" Round 16300-(See Length Below)
Single Two Three Seven EightSeat Leaf Lgth leaf Lgth Leaf Lgth Leaf Lgth Leaf Lgth
Height Spring Spring Spring Spring Spring3/4 -06 93/4 -07 101/4 -08 103/4 -10 113/4 -11 121/4
11/4 -07 101/4 -08 103/4 -09 111/4 -11 123/4 -12 123/413/4 -08 103/4 -09 111/4 -10 113/4 -12 123/4 -13 131/421/4 -09 111/4 -10 113/4 -11 121/4 -13 133/4 -14 133/423/4 -10 113/4 -11 121/4 -12 123/4 -14 133/4 -15 141/431/4 -11 121/4 -12 123/4 -13 131/4 -15 143/4 -16 143/433/4 -12 123/4 -13 131/4 -14 133/4 -16 143/4 -17 151/441/4 -13 131/4 -14 133/4 -15 141/4 -17 153/4 -18 153/443/4 -14 133/4 -15 141/4 -16 143/4 -18 153/4 -19 161/4
U-BOLT CHART B5" Square Axle
U-bolt lengths necessary for variousseat height - spring combinations
7/8" Diameter x 3" Round 7040-(See Below)Single Two Three Seven Eight
Seat Leaf Lgth leaf Lgth Leaf Lgth Leaf Lgth Leaf LgthHeight Spring Spring Spring Spring Spring
3/4 -08 103/4 -09 111/4 -10 103/4 -10 113/4 -11 121/411/4 -09 111/4 -10 113/4 -11 111/4 -11 123/4 -12 123/413/4 -10 113/4 -11 121/4 -12 113/4 -12 123/4 -13 131/421/4 -11 121/4 -12 123/4 -13 121/4 -13 133/4 -14 133/423/4 -12 123/4 -13 131/4 -14 123/4 -14 133/4 -15 141/431/4 -13 131/4 -14 133/4 -15 131/4 -15 143/4 -16 143/433/4 -14 133/4 -15 141/4 -16 133/4 -16 143/4 -17 151/441/4 -15 141/4 -16 143/4 -17 141/4 -17 153/4 -18 153/443/4 -16 143/4 -17 151/4 -18 143/4 -18 153/4 -19 161/4
HUTCHENS H9700 and CH9700 SUSPENSIONSU-BOLT CHART F
5" Round Underslung AxleU-bolt lengths necessary for various
UNDERSLUNG seat height - spring combinations7/8" Diameter x 5" Round 7816-(See Below)
(See Also U-bolt Pages 310, 311)Single Two Three Seven Eight
Seat Leaf Lgth leaf Lgth Leaf Lgth Leaf Lgth Leaf LgthHeight Spring Spring Spring Spring Spring
3/4 -08 103/4 -09 111/4 -10 113/4 -12 123/4 -13 131/411/4 -09 111/4 -10 113/4 -11 121/4 -13 133/4 -14 133/413/4 -10 113/4 -11 121/4 -12 123/4 -14 133/4 -15 141/421/4 -11 121/4 -12 123/4 -13 131/4 -15 143/4 -16 143/4
NO-HOPOPTION CHART E - AXLE GROUP5" Round Axle
Seat Radius Attach FittingHeight Rod w/7/8" U-Bolts w/3/4" U-Bolts Seat
3/4" T-S-16398-06 T-S-10775-00 T-S-16308-01 T-S-301-0111/4" T-S-16398-06 T-S-10775-00 T-S-16308-01 T-S-301-0213/4" T-S-16398-06 T-S-10775-00 T-S-16308-01 T-S-301-0321/4" T-S-16398-06 T-S-10775-00 T-S-16308-01 T-S-301-04
BOTTOM PLATE CHART DBottom Plate
Axle Size Part No.5" Rd. w/7/8" Dia. U-Bolts T-S-710-005" Rd. w/3/4" Dia. U-bolts T-S-16297-01
5" x 5" Square T-S-7747-014" x 6" Rect. T-S-7746-00
U-BOLTS5" Round Axle
7/8" Dia. Std. x 3" Round 7040-(See Length Below)3/4" Dia. Opt. x 3" Round 16300-(See Length Below)
Single Two Three Seven EightSeat Leaf Lgth leaf Lgth Leaf Lgth Leaf Lgth Leaf Lgth
Height Spring Spring Spring Spring Spring3/4 -06 93/4 -07 101/4 -08 103/4 -10 113/4 -11 121/4
11/4 -07 101/4 -08 103/4 -09 111/4 -11 123/4 -12 123/413/4 -08 103/4 -09 111/4 -10 113/4 -12 123/4 -13 131/421/4 -09 111/4 -10 113/4 -11 121/4 -13 133/4 -14 133/4
5" x 5" Square Axle7/8" Diameter x 3" Round 7040-(See Below)
Single Two Three Seven EightSeat Leaf Lgth leaf Lgth Leaf Lgth Leaf Lgth Leaf Lgth
Height Spring Spring Spring Spring Spring3/4 -08 103/4 -09 111/4 -10 103/4 -10 113/4 -11 121/4
11/4 -09 111/4 -10 113/4 -11 111/4 -11 123/4 -12 123/413/4 -10 113/4 -11 121/4 -12 113/4 -12 123/4 -13 131/421/4 -11 121/4 -12 123/4 -13 121/4 -13 133/4 -14 133/4
252
HUTCHENS H-900 SERIES SINGLE POINT SUSPENSIONSApplicationThe 900 series suspensions are designed for heavy-duty and/or off-road applications. The 900 is a single pointsuspension connected to the trailer frame by a trunnion located at the center of the suspension. This makes it idealfor logging, heavy load hauling and dump operations.CapacityThe 900 series suspensions are available in Gross Tandem Weight Ratings (GTWR) of 36,000, 42,000, 44,000, 50,000and 60,000 lbs.OptionsNumerous mounting heights (Mtg./Ht. = The vertical distance from the centerline of the axle to the top of the trunnionhanger), axle and trunnion combinations are possible. These include overslung (OS, springs over axles) andunderslung (US, springs under axles) axle units as well as overslung (springs over trunnion) and underslung (springsunder trunnion) trunnion configurations.
Axle Centers
Underslung Axles - Overslung Trunnion
TrunnionCenters
SpringCenters
Underslung Axles - Underslung Trunnion
Overslung Axles - Underslung Trunnion
Overslung Axles - Overslung Trunnion
Standard trunnion hanger spacing is 22-1/8" for 38" springcenters. Trunnion centers of 20-1/8" can be specified whilemaintaining 38" spring centers.
Trunnion bushings of either rubber or UHMW Polyethylene("free oscillating") are available. Unless otherwise specified,trunnion bushings are assumed to be rubber.
When installing your 900 series suspension, adequatevertical clearance must be provided for tires, springs andU-bolts. This is usually accomplished through the use of amounting bracket or pedestal.
How To Order Your 900 Series Single PointSuspension System1. Determine which 900 series suspension will meet
your weight requirements - 36,000#, 42,000#,44,000#, 50,000#, or 60,000# GTWR(Gross Tandem Weight Rating).
2. Select a mounting height that corresponds to yourparticular situation. See the Axle Specifications andMounting Heights Charts in this catalog.
3. Axle configuration - Overslung or Underslung4. Axle size - 5", 53/4", 6" round or 5" X 5" square.5. Trunnion configuration - Overslung or Underslung6. Trunnion hanger height - 21/2", 41/2", 61/2" or 81/2". In
many instances more than one combination willresult in the same mounting height. Therefore, all ofthe aforementioned factors should be taken intoconsideration when ordering as well as the following:
7. Axle Centers - See axle Specifications AndMounting Heights Charts.
8. Spring Centers - 36 or 38 inches.9. Trunnion Centers - 201/8 or 221/8 inches.10. To help ease the installation of your 900 series
suspension you may wish to order a pair of Hutchmounting brackets, part number 16793-01
The 900 series suspension also includes options for5", 5-3/4", and 6" round axles, or 5" X 5" square axles.Several different axle centers are available. Standard springcenters for the 900 series suspensions is 38". Other springcenters can be furnished on request.
253
OVERSLUNG AXLE SPECIFICATIONS AND MOUNTING HEIGHTS FOR MODELS:H-900-36 Thru H-900-44 with 2.5 Trunnions Height, 5" Round. and 5" x 5" Square Axles
H900-50 and H-900-60 with 4.5 Trunnion Height, 5" Round and 5" x 5" Square Axles.Gross
Tandem NumberWeight of Nominal Mounting Height
Model Rating Spring Spring Axle Spacing Overslung Trunnion Underslung TrunnionDesc. (GTWR) Number Leaves Unloaded Loaded Unloaded Loaded Unloaded Loaded
H-900-36 36,000 10054-00 5 48.00 48.75 4.00 3.00 15.00 14.00H-900-36 36,000 11151-00 5 50.50 51.50 4.00 3.00 15.00 14.00H-900-42 42,000 9997-00 6 48.00 48.75 4.00 3.00 15.75 14.75H-900-42 42,000 9998-00 6 50.50 51.50 4.00 2.75 15.75 14.62H-900-44 44,000 TRA-2750 Tapered 3 50.50 51.50 4.00 2.87 14.50 13.37H-900-50 50,000 10055-00 7 48.00 48.75 6.00 5.00 18.50 17.12H-900-50 50,000 9999-00 7 50.50 51.50 6.00 4.62 18.50 17.50H-900-50 50,000 TRA-2750 Tapered 3 50.50 51.50 6.00 4.62 16.50 15.12H-900-50 50,000 10000-00 8 54.00 55.25 6.50 5.00 19.75 18.25H-900-60 60,000 10001-00 9 54.00 55.25 6.50 4.75 20.50 18.75
With 4.5 Trunnion Height Add (H-900-36 thru 44/(H-900-50 and 60) 2.00/0.00 2.00/0.00 2.00/0.00 2.00/0.00With 6.5 Trunnion Height Add (H-900-36 thru 44/(H-900-50 and 60) 4.00/2.00 4.00/2.00 4.00/2.00 4.00/2.00With 8.5 Trunnion Height Add (H-900-36 thru 44/(H-900-50 and 60) 6.00/4.00 6.00/4.00 6.00/4.00 6.00/4.00
05.05.05.05.ddA desU erA selxA dnuoR "6 ro "57.5 nehWMounting heights shown for models H-900-50 and 60 are based on a 4.50 high trunnion bracket. Do not use the 2.50high bracket on models with 50,000 lbs. GTWR or greater.
UNDERSLUNG AXLE SPECIFICATIONS AND MOUNTING HEIGHTS FOR MODELS:H-900-36 Thru H-900-44 with 2.5 Trunnions Height, 5" Round. and 5" x 5" Square Axles
H900-50 and H-900-60 with 4.5 Trunnion Height, 5" Round and 5" x 5" Square Axles.Gross
Tandem NumberWeight of Nominal Mounting Height
Model Rating Spring Spring Axle Spacing Overslung Trunnion Underslung TrunnionDesc. (GTWR) Number Leaves Unloaded Loaded Unloaded Loaded Unloaded Loaded
H-900-36 36,000 10054-00 5 50.50 50.00 -4.25 -5.25 6.75 5.75H-900-36 36,000 11151-00 5 53.00 52.25 -4.25 -5.25 6.75 5.75H-900-42 42,000 9997-00 6 50.62 50.00 -5.00 -6.00 6.75 5.75H-900-42 42,000 9998-00 6 53.00 52.25 -5.00 -6.25 6.75 5.5H-900-44 44,000 TRA-2750 Tapered 3 53.00 52.25 -5.00 -6.12 5.50 4.37H-900-50 50,000 10055-00 7 50.62 50.00 -3.00 -4.00 9.50 8.50H-900-50 50,000 9999-00 7 53.00 52.25 -3.00 -4.37 9.50 8.12H-900-50 50,000 TRA-2750 Tapered 3 53.00 52.25 -3.00 -4.37 7.50 6.12H-900-50 50,000 10000-00 8 57.00 56.00 -2.50 -4.00 10.75 9.25H-900-60 60,000 10001-00 9 57.00 56.00 -2.50 -4.25 11.50 9.75
With 4.5 Trunnion Height Add (H-900-36 thru 44/(H-900-50 and 60) 2.00/0.00 2.00/0.00 2.00/0.00 2.00/0.00With 6.5 Trunnion Height Add (H-900-36 thru 44/(H-900-50 and 60) 4.00/2.00 4.00/2.00 4.00/2.00 4.00/2.00With 8.5 Trunnion Height Add (H-900-36 thru 44/(H-900-50 and 60) 6.00/4.00 6.00/4.00 6.00/4.00 6.00/4.00When 5.75" or 6" Round Axles Are Used Subtract -.50 -.50 -.50 -.50Mounting heights shown for models H-900-50 and 60 are based on a 4.50 high trunnion bracket. Do not use the 2.50high bracket on models with 50,000 lbs. GTWR or greater.
HUTCHENS H-900 SERIES SINGLE POINT SUSPENSIONS
Spring End Cap Chart E (Item 8)Overslung Axle Underslung Axle
Unit Weight Cap. (lbs). Unit Weight Cap. (lbs.)Axle Size 36,000 42-60,000 36,000 42-60,0005" Rd., 5x5 Sq. 10049-00 9937-00 10050-02 9941-025.75" Rd., 6" Rd. 10049-00 9937-00 --- 9942-02
254
HUTCHENS H-900 SERIES SINGLE POINT SUSPENSIONS
25
17
8
5 X 5 Axle Only
Pressure Plate(Item 25) Required
14
8
14
17
25
5 X 5 Axle Only
Pressure Plate(Item 25) Required
14
16
15
8
10
12
13
23
17
7
24
21
22
5
1
2
3
4
5
6
7
9
18
19
20
21
22
8
9
10
15
16
17
13
14
11
12
18
19
20
4
3
2
1
9
UNDERSLUNG TRUNNIONUNDERSLUNG AXLE
OVERSLUNG TRUNNIONOVERSLUNG AXLE
Spring End Cap Chart E (Item 8)Overslung Axle Underslung Axle
Unit Weight Cap. (lbs.) Unit Weight Cap. (lbs.)Axle Size 36,000 42-60,000 36,000 42-60,0005" Rd., 5x5 Sq. 10049-00 9937-00 10050-02 9941-025.75" Rd., 6" Rd. 10049-00 9937-00 --- 9942-02
255
HUTCHENS H-900 SERIES SINGLE POINT SUSPENSIONSMULTI-LEAF 42, 50 AND 60,000
QuantityOverslung Trunnion Underslung Trunnion
Overslung Underslung Overslung UnderslungItem Part No. Axle Axle Axle Axle Description
1 See Chart A 2 2 2 2 Trunnion Hanger2 T-S-10376-00 4 4 4 4 Hex Bolt 3/4-16 UNF x 41/2 GR53 T-S-895-00 2 2 2 2 Washer, 7 Ga. x 41/32 ID x 53/4 OD4 See Chart B 1 1 1 1 Trunnion Tube5 See Chart C 4 4 4 4 U-Bolt, Trunnion6 T-S-9640-00 2 2 0 0 Top Plate - Cast, Square U-Bolt7 See Chart D 2 2 2 2
2 2 2 22 2 2 22 2 2 2
Spring**8 See Chart E 4 4 4 4 Spring End Cap9 T-S-39D12 20 4 20 4 Hex Nut, Self Locking, 3/4-16 UNF10 T-S-9293-00 16 8 16 8 Hex Bolt 5/8-18 UNF x 2, Gr 511 T-S-817-00 32 0 32 0 Washer, 1/8 x 13/16 ID x 11/2 OD12 T-S-814-00 8 8 8 8 Rubber Pd - Plain13 T-S-10608-00 4 4 4 4 Adjustment Plate14 See Chart F 4 4 4 4 Spring Seat15 T-S-10273-00 16 8 16 8 Washer, 1/8 x 21/32 ID x 115/16 OD16 T-S-37-03 16 8 16 8 Hex Locknut 5/8-18 UNF17 See Chart G 8 8 8 8 U-Bolt, Axle18 T-S-891-00 Trunnion Hub - Upper Half19 T-S-890-00 Rubber Bushing - Trunnion Hub
T-S-20248-01 Free Oscillating Turnnion Bushing*20 T-S-898-00 2 2 - - Trunnion Hub - Lower Half
T-S-892-00 - - 2 2 Trunnion Hub - Lower Half21 T-S-837-00 8 8 8 8 Washer, 1/8 x 11/4 ID x 21/4 OD22 T-S-836-00 8 8 8 8 Hex Nut, 11/8-12 UNF x 11/2 Hi23 T-S-10562-00 0 16 0 16 Flange Nut - Self Locking 1-14 UNS24 T-S-820-00 0 0 2 2 Spring Clamp Plate25 T-S-10488-00 4 4 4 4 Pressure Plate, 5 x 5 Axle Only
Trunnion U-Bolt Chart C (Item 5)Unit Weight/Spring T runnion ConfigurationCap. (lbs.)/Part No. Overslung Lgth Underslung Lgth44,000/12258-01 T-S-9639-01 12
121415
1313
5/16 T-S-835-02 13 3/4
50,000/10055-00 T-S-9639-03 15/16 T-S-835-02 15 3/8
50,000/9999-00 T-S-9639-03 15/16 T-S-835-04 15 3/8
50,000/12258-01 T-S-9639-01 5/16 T-S-835-02 13 3/4
50,000/10000-00 T-S-9639-04 11/16 T-S-835-06 16 1/8
60,000/10001-00 T-S-9639-05 1/2 T-S-835-05 17
Axle U-Bolt Chart G (Item 17)Unit Weight Axle Configuration
Axle Size Capacity Overslung Lgth Underslung Lgth5" Rd 42-60,000 T-S-10060-01 7 T-S-10064-02 101/2
5"x5" Sq. 42-60,000 T-S-10063-02 77/8 T-S-10067-03 111/8
**Spring Identification Chart D (Item 7)Unit Weight
Capacity 42,000 42,000 50,000 50,000 50,000 60,000Number
of Leaves 6 6 7 7 8 9Spring
Part No. T-S-9997-00 T-S-9998-00 T-S-10055-00 T-S-9999-00 T-S-10000-00 T-S-10001-00
Trunnion Tube Chart B (Item 4)Spring Centers (")/Trunnion Hanger Centers(")
Unit Wt. Cap. (lbs.) 38/22.12 36/20.12 44/28.12 42/26.12 41/25.1236,000 - 44,000 T-S-893-01 T-S-893-04 T-S-893-07 T-S-893-09 T-S-893-0050,000 & 60,000 T-S-893-02 T-S-893-05 T-S-893-08 T-S-893-10 T-S-893-12
Trunnion Hanger Chart A (Item 1)Trunnion Hanger Height (Inches)
21/2 41/2 61/2 81/2Part No. T-S-850-01 T-S-10476-03 T-S-849-01 T-S-897-01
Spring Seat Chart F (Item 14)Axle Configuration
Axle Size Overslung Underslung5" Rd T-S-9934-02 T-S-9938-00
5 x 5 Sq. T-S-9935-02 T-S-9939-00
256
Cast Equalizer With BushingPart No. Application
T-S-16159-03 9700 SuspensionIncludes 16146-01 rubber bushing
Qty. Part No. Description1 T-S-16150-01 Bolt, 1-1/8-7 x 6088" long.2 T-S-837-00 Washer, 1/8x1-1/4x2-1/4OD1 T-S-11154-00 Hex lock nut, 1-1/8-72 T-S-759-00 Bolt, spr'g retainer, 5/8-18x4-1/42 T-S-756-00 Sleeve spacer, 3/4 OD x 3-1/42 T-S-37-03 Hex lock nut, 5/8-18
Parts are for one rocker installation. (Rocker not included)Note: Kit includes decal with special torque requirementsfor this kit. Decal should be applied to vehicle.
Hanger Style Assembly Part No. Fabricated Cast
Straddle T-S-16319-01 T-S-16319-51Under Mount T-S-16319-02 T-S-16319-52Side Mount T-S-16319-04 T-S-16319-52Flange Mount T-S-16319-07 T-S-16319-57
Cast Equalizer With BushingPart No. Application
T-S-17784-01 CH-9700 SuspensionIncludes 16146-01 bushing
Fab Equalizer With BushingPart No. Application
T-S-16158-01 H-9700 SuspensionsIncludes 16146-01 rubber bushing
Fab Equalizer With BushingPart No. Application
T-S-16168-10 9700 Suspensions(Includes 16146-01 rubber bushing)
For suspensions with 109"axle centers
Cast Equalizer With BushingPart No. Application
T-S-16159-01* 9700 SuspensionIncludes 16146-01 rubber bushing
*For suspensions with 44" A/Cusing 751-04 sixleaf springs
For suspensions with 44" A/C using singleleaf springs.
BOLT KIT FOR9700 SERIESROCKERINSTALLATIONReplaces theHuck lock bolton H-9700 seriessuspensions.Kit No. NL97S
HUTCHENS 9700 SERIES SUSPENSIONSHANGER AND ROCKER ASSEMBLY
Factory assembled using a Huck "lockbolt",standard on H9700 & CH9700 suspensions.
141/2"
113/4 11" 1/2"
143/4"
75"
T-S-9239-10 7700 Suspensions(Includes 7010-00 rubber bushing)
*Illustration shows beam with bushing for 9700series suspension
257
Front Hanger Straddle MountPart No. ApplicationT-S-7701-01 H-9700 & H-7700
Equalizer Hanger Straddle MountPart No. ApplicationT-S-16169-01 H-9700 Suspension
Front Hanger Under MountPart No. ApplicationT-S-20728-01 H-9700 & H-7700
Equalizer Hanger Under MountPart No. ApplicationT-S-16171-01 H-9700 Suspension
Rear Hanger Straddle MountPart No. ApplicationT-S-7703-01 H-9700 & H-7700
Rear Hanger Under MountPart No. ApplicationT-S-20732-01 H-9700 & H-7700
(LH Shown)
Front Hanger Side MountPart No. ApplicationT-S-20730-01 H-9700 & H-7700 (RH)T-S-20729-01 (LH) H-9700 & H-7700
Equalizer Hanger Side MountPart No. ApplicationT-S-16175-01 H-9700 Suspension
(LH Shown)
Rear Hanger Side MountPart No. ApplicationT-S-20734-01 (RH) H-9700 & H-7700T-S-20733-01 (LH)
HUTCHENS 9700 & 7700 SERIES SUSPENSIONS
258
Equalizer HangerFlange Mount
Part No. ApplicationT-S-16178-01 H-9700
Cast Front Hanger Straddle MountPart No. ApplicationT-S-702-01 CH-9700/CH-7700
(LH Shown)
Cast Front Hanger Under/Side Mt.Part No. ApplicationT-S-16291-04 (RH) CH-9700T-S-16291-03 (LH) CH-9700
Cast Equalizer HangerStraddle Mount
Part No. ApplicationT-S-16196-03 CH-9700
Cast Equalizer HangerUnder Mount/Side Mount
Part No. ApplicationT-S-16197-03 CH-9700
(LH Shown)
Cast Rear Hanger Straddle MountPart No. ApplicationT-S-712-01 CH-9700
HUTCHENS 9700 & 7700 SERIES SUSPENSION PARTS
(LH Shown)
Rear Hanger Flange MountPart No. ApplicationT-S-7703-08 (RH) H-9700 & H-7700T-S-7703-07 (LH)
(LH Shown)
Cast Rear Hanger Under/Side Mt.Part No. ApplicationT-S-16293-02 (RH) H-9700 & H-7700T-S-16293-01 (LH)
(LH Shown)
Front Hanger Flange MountPart No. ApplicationT-S-7701-08 (RH) H-9700/H-7700T-S-7701-07 (LH) H-9700/H-7700
259
Cast Equalizer HangerFlange Mount
Part No. ApplicationT-S-16199-03 CH9700
Equalizer Hanger Under Mount97", 109", 121" Widespreads
Part No. ApplicationT-S-16185-01 9700 Suspensions
Beam Guide Hanger Under Mount97", 109", 121" Widespreads
Part No. ApplicationT-S-7707-149700 Suspensions
HUTCHENS 9700 & 7700 SERIES SUSPENSION PARTS
Under Mount Beam GuidePart No. ApplicationT-S-7707-14 H-7700 SuspensionsFor Widespread suspensions
Rubber Equalizer BushingPart No. Application
(A) T-S-18723-01 9700 Suspensions(B) T-S-7010-00 7700 Suspensions
(LH Shown)
Cast Front Hanger Flange Mt.Part No. ApplicationT-S-702-12 (RH) CH-9700, CH7700T-S-702-11 (LH) CH-9700, CH7700
(A)
(B)
Underslung Parts - 9700 -Part No. DescriptionT-S-301-01 3/4" Spring Seat 5" Round T-S-706-01 Bottom Plate 5" RoundT-S-7759-01 3/4" Spring Seat 5" Square
Rebound Parts forHucked Suspensions
Part No. ApplicationT-S-NL97H H9700 Suspensions
Includes 4pcs ea of 37-03, 756-00, 759-00
(LH Shown)
Cast Rear Hanger Flange MountPart No. ApplicationT-S-712-12 (RH) CH-9700T-S-712-11 (LH) CH-9700
260
H-7700The H-7700 series is nolonger available as acomplete suspension.
Fabricated EqualizerPart No. ApplicationT-S-750-03 H7700 SuspensionsIncludes 7010-00 rubber bushing
Cast EqualizerPart No. ApplicationT-S-19137-01 CH7700 SuspensionsIncludes 7010-00 rubber bushing
Cast EqualizerPart No. ApplicationT-S-7750-02 7700 SuspensionsT-S-16159-01 9700 SuspensionsIncludes rubber bushingFor 50 inch axle centersusing standard multi-leaf springs.For 44 inch axle centersusing 751-04 six leaf springs
Straddle Mount Equalizer HangerPart No. ApplicationT-S-7702-01 H7700 Suspensions
Under Mount Equalizer HangerPart No. ApplicationT-S-7702-02 H7700 Suspensions
Side Mount Equalizer HangerPart No. ApplicationT-S-7702-03 H7700 Suspensions
Flange Mount Equalizer HangerPart No. ApplicationT-S-7702-05 H7700 Suspensions
INSTALLATION KITFor 7700 Series Equalizers
Kit No. NL77Qty. Part No. Description
2 T-S-7016-01 Step Bolt2 T-S-759-00 5/8-18X4 1/2 Hex Bolt2 T-S-756-00 Sleeve Spacer4 T-S-37-03 5/8-18 Hex Locknut1 T-S-729-00 Tab Washer, 5/8
HUTCHENS 9700 & 7700 SERIES SUSPENSION PARTS
113/4" 113/4"
141/2"T-S-7750-02shown
261
"A"
Keep Your HutchensSuspensions All"Hutch"
Adjustable Radius RodsPart No. "A" DimensionT-S-16398-01 14"T-S-16398-02 16"T-S-16398-03 16.62"T-S-16398-04 19.25"T-S-16398-06 21.50"T-S-16398-17 17"Includes 722-00 rubber bushings
Suspension Parts ForH-7700 and H-9700
SuspensionsNon-Adjustable Radius Rod
Part No. DescriptionT-S-715-00 19.25" Center to CenterIncludes 722-00 rubber bushings
"A"
Top PlatePart No. Description
T-S-16868-01 H-7700 & H-9700
Bottom PlatePart No. Description
T-S-710-00 H-7700 & H-9700
Radius Rod BushingPart No. Description
T-S-722-00 1" I. D. x 3" LongRadius Rod Bushing Kit
Part No. ContainsT-S-NL1448 2 722-00 Bushings
2 719-02 1-14 x 5 bolt2 10562-00 1-14 Nut
Radius Rod Bolt & NutPart No. DescriptionT-S-719-02 Bolt, 1-14 x 5T-S-10562-00 Flange Locknut, 1-14 Gr F
Rebound Bolt, Spacer, NutPart No. Description
T-S-759-00 5/8-18 x 41/2 GR 2 BoltT-S-37-03 5/8-18 UNF GR B NutT-S-756-00 Spacer, 3/4" x 31/4"Lg.
Bottom Plate For No-HopPart No. DescriptionT-S-10775-00 5" round axles
Spring Seat, 5" RoundPart No. DescriptionT-S-19360-01 3/4" High, H-7700/H-9700
Spring Spacer, 23/16" HighPart No. DescriptionT-S-7705-00 2.187" x 3.00" x 7.50"
Spring Spacer, 1.5" HighPart No. DescriptionT-S-7028-00 1.5" x 2.75" x 7.50"
3/4"
23/16"11/2"
HUTCHENS H9700 & H7700 SERIES SUSPENSION PARTS
Kit containing4 of each item:
Part No. T-S-NL97H