alba spring offers promo april - may 2015

4
Terms & Conditions All prices subject to VAT unless otherwise stated. All offers are subject to availability & while stocks last. All pictures shown are for illustraon purposes only. Whilst every possible care has been taken to ensure the informaon within this brochure was accurate at the me of going to print, Alba Diagnoscs cannot accept any liability for any possible errors. Orders must be received in wring via email: [email protected] or by fax: 01592 774777 Offers last unl Friday 29th May 2015. Distributor Stamp £249.00 List £399.00 BEARING PRESS BUSH REMOVAL KIT Part No. ALB40224PK A workshop kit of Bush Removal Sleeves & Press Support Block for use on Workshop Press Bearing Press Support - ALB40097 • Press bearings easily on a variety of different suspension arms • The three point contact will guarantee a perfect, safe support Bush Sleeve Kit - ALB40224 • Universal set of sleeves for removing & installing bushes, bearings etc • For use in conjuncon with Bearing Press Support block and Workshop Press • Standard universal applicaons: Car, HGV, LCV • 20 Bush Sleeves – ID range: 34.5 - 72.5mm, OD Range: 43.5 - 82.5mm • Adaptor plate for use with Press Block In Use SPRING OFFERS April - May 2015 [email protected] | www.albadiagnoscs.com INNOVATIVE WORKSHOP SOLUTIONS • Pressure test kit for tesng Cooling System Pressures • Aluminium System Connector Caps 7x with Quick Connectors • Aluminium Pressure Pump c/w Connecng Hose & Pressure Relief Valve • Applicaons include ; DAF, Deutz, ERF, Iveco, MAN, Mercedes, Renault, Scania, Volvo, full list available at www.albadiagnoscs.com COMMERCIAL VEHICLE COOLING SYSTEM PRESSURE TESTER Part No. ALB40218 • Pressure test kit for tesng Turbo System Pressure & idenfying leaks within the system • Set of 8x system connectors: 4 x test & 4x closed adaptors • Diameter range - 55mm - 94mm •Connectors have rough surface to allow for beer grip within turbo hose end • Use with any standard pressure pump from the Alba Pressure Tesng range or can be connected direct to compressed air system with a suitable pressure regulator TURBO TESTER Part No. ALB40219 £85.80 List £140.00 £82.50 List £135.00 ELECTRIC PRESSURE TESTER Part No. ALB30924 • Can be used with both ALB40218 & ALB40219 to help diagnose leaks faster & easier £195.00 List £240.00

Upload: albadiagnostics

Post on 21-Jul-2016

222 views

Category:

Documents


7 download

DESCRIPTION

Alba Spring Offers Promo April - May 2015

TRANSCRIPT

Page 1: Alba Spring Offers Promo April - May 2015

Terms & Conditions

All prices subject to VAT unless otherwise stated. All offers are subject to availability & while stocks last. All pictures shown are for illustration purposes

only. Whilst every possible care has been taken to ensure the information within this brochure was accurate at the time of going to print, Alba Diagnostics

cannot accept any liability for any possible errors. Orders must be received in writing via email: [email protected] or by fax: 01592 774777

Offers last until Friday 29th May 2015.

Distributor Stamp

£249.00 List £399.00

BEARING PRESS BUSH REMOVAL KIT Part No. ALB40224PK

A workshop kit of Bush Removal Sleeves & Press Support Block for use on Workshop Press

Bearing Press Support - ALB40097

• Press bearings easily on a variety of different suspension arms • The three point contact will guarantee a perfect, safe support

Bush Sleeve Kit - ALB40224 • Universal set of sleeves for removing & installing bushes, bearings etc

• For use in conjunction with Bearing Press Support block and Workshop Press • Standard universal applications: Car, HGV, LCV

• 20 Bush Sleeves – ID range: 34.5 - 72.5mm, OD Range: 43.5 - 82.5mm • Adaptor plate for use with Press Block

In Use

SPRING OFFERS April - May 2015

[email protected] | www.albadiagnostics.com

INNOVATIVE WORKSHOP SOLUTIONS

• Pressure test kit for testing Cooling System Pressures • Aluminium System Connector Caps 7x with Quick Connectors • Aluminium Pressure Pump c/w Connecting Hose & Pressure Relief Valve • Applications include ; DAF, Deutz, ERF, Iveco, MAN, Mercedes, Renault, Scania, Volvo, full list available at www.albadiagnostics.com

COMMERCIAL VEHICLE COOLING SYSTEM PRESSURE TESTER Part No. ALB40218

• Pressure test kit for testing Turbo System Pressure & identifying leaks within the system

• Set of 8x system connectors: 4 x test & 4x closed adaptors • Diameter range - 55mm - 94mm

•Connectors have rough surface to allow for better grip within turbo hose end

• Use with any standard pressure pump from the Alba Pressure Testing range or can be connected direct to

compressed air system with a suitable pressure regulator

TURBO TESTER Part No. ALB40219

£85.80 List £140.00

£82.50 List £135.00

ELECTRIC PRESSURE TESTER Part No. ALB30924

• Can be used with both ALB40218 & ALB40219 to help diagnose leaks faster & easier

£195.00 List £240.00

Page 2: Alba Spring Offers Promo April - May 2015

2 [email protected] | www.albadiagnostics.com

INNOVATIVE WORKSHOP SOLUTIONS

HEAVY DUTY PNUMATIC HEAVY DUTY PNUMATIC HEAVY DUTY PNUMATIC SUSPENSION WORKSTATION KITSSUSPENSION WORKSTATION KITSSUSPENSION WORKSTATION KITS • Auto levelling upper arms allows the machine to work easily on both conical & misaligned springs • Cylinder made from light alloy & nylon resin with fiberglass to avoiding corrosion & oxidation • Safety cage fitted with safety valve system • Foot-pedal works only when the safety valve is closed • Supplied with small (78 -130mm) & large (125 - 205mm) jaws • Includes strut-vice, to hold struts of variable lengths • Working pressure: min 6 bar - max 10 bar • Cylinder stroke: 330 mm • Ideal for working on conical, side-load & heavy duty springs • Made in Europe: CE approved

KITS INCLUDE

SHOCK ABSORBER MASTER TOOL SET ALB30956 MERCEDES SET

ALB40175 • Jaws for C & E Class

Mechanical (ie non-pneumatic) version of Heavy Duty Suspension Workstation • Impact Wrench Operation (not supplied) • 19mm Hex Drive for use with Impact Wrench, or standard hand socket/wrench • Auto levelling upper arms; works easily on both conical & misaligned springs • Safety guard fitted • Supplied with strut-vice, to hold struts of variable lengths • Works on conical, side-load & heavy duty springs • Compression force: 1600Kg • Machine dimensions: 140cm high, 54cm wide, 31cm deep • Made in Europe: CE approved

£1495.00 List £1955.00

• Compression force: 1960Kg@ 10 BAR • Machine dimensions: 140cm high, 52cm wide, 30cm deep

HEAVY DUTY SUSPENSION WORKSTATION (2 TONNE) Part No. ALB40170KIT2

• Compression force: 2450Kg@ 10 BAR • Machine dimensions: 160cm high, 52cm wide, 30cm deep

EXTRA-HEAVY DUTY SUSPENSION WORKSTATION (2.5 TONNE) Part No. ALB40180KIT2

£1695.00 List £2214.00

MECHANICAL HEAVY DUTY SUSPENSION WORKSTATION Part No. ALB40255

£795.00

£1575.00 List £1995.00

Also Available without ALB30956 Part No. ALB40180KIT1

£1375.00 List £1795.00

Also Available without ALB30956 Part No. ALB40170KIT1

Page 3: Alba Spring Offers Promo April - May 2015

3 [email protected] | www.albadiagnostics.com

£199.00 List £249.00

£269.00 List £420.70

£99.00 List £141.41

£79.95 List £128.75

EGR VALVE TESTER & CLEANER Part No. ALB40165

SOUNDSONIC Part No. ALB30670

COMBO CHASSIS & ENGINE EAR Part No. ALB30508A

MOBILE TOOLS CABINET 3 DRAWER Part No. ALB40016MT

GLOW PLUG TESTER MULTI-VOLTAGE Part No. ALB30913

INNOVATIVE WORKSHOP SOLUTIONS

• Works on all types of glow plugs - any voltage: 4.4v/5v/7v/8.5v/10v/ 11v, plus many more • Displays open & short circuit • Measures actual glow plug resistance to evaluate plug • Internal 9 volt battery & Low warning indicator • Auto shut-off when not being used • Protected with oil-resistant rubber boot

• Tests integrity of EGR valves & other 12v solenoids & helps the cleaning process for carbonised EGR valves • Variable frequency allows EGR valves to be cycled in low-frequency mode & 12v operated for portability • In high frequency mode, the valve can be opened progressively, allowing more efficient manual cleaning • Also used to test a variety of other 12v solenoid type valves; vacuum solenoids, boost pressure control valves & actuators, etc

• Internal drawer locking mechanism • Ball bearing slides • Internal rubber drawer liners • Non-slip rubber top mat • 2 static wheels /2 locking wheels • Dimensions: 690 x 460 x 73

Tools Not Included

• Unique inflatable bladder sealing system provides universal coverage for cars & light commercials – no individual adaptors required • Suitable for system neck diameters up to 60mm • Locate leaks from: Head Gaskets, Radiator & Heater cores, Water Pumps & Hoses, Core Plugs & Engine Blocks • Cap Pressure Testing: - 6 unique double-ended adaptors for testing the most common automotive pressure caps

£145.00 List £225.00

DELUXE COOLING SYSTEM & CAP PRESSURE TESTER Part No. ALB70889

• Professional diagnostic tool using non-intrusive ultrasound to inspect

& isolate difficult to find sounds non-audible to the human ear

• Sound is converted to audible level & LED bargraph indicates

intensity & direction of sound

• Not affected by ambient noise – eg radios,

voices, wind, traffic noise etc

• Contains; transmitter & receiver,

headphones, aluminium contact probe, aluminium air/acoustic probe, user manual & storage case

• Listen to 6 under chassis locations at one time – all in one road test • Hear noises that cannot be duplicated in the workshop • Improves workshop efficiency, revenues, customer satisfaction and saves time • Contains; headphones, control unit, noise wand, & 6 pick-ups

ALB40073 Magnetic Parts Tray

£249.00 List £295.00

Page 4: Alba Spring Offers Promo April - May 2015

4

INNOVATIVE WORKSHOP SOLUTIONS

PRESSURE BRAKE BLEEDER Part No. ALB560AB UK’s Top Selling Pressure Brake Bleeder • Full fluid change in approx. 15 minutes by a single operator • Portable: operates off 12V supply (vehicle battery) • Capacity 1.25ltrs • Suitable for clutch bleed as well as brake bleed • Supplied with Euro Cap & Bleed Bottle

£45.00 List £59.95

BRAKE BLEED WRENCH SET Part No. ALB40207 • Set of special socket wrenches for loosening & tightening bleed nipples • 8, 10 & 11mm to cover all popular applications • Silicon hose (1.2mtrs) with safety check valve • Ideal for brake bleeding without removing the wheels

£67.50 List £101.06

TROLLEY & STORAGE CONTAINER Part No. ALB30952PC

£285.00 List £330.00

£135.00 List £156.00

BRAKE PIPE FLARING TOOL Part No. ALB30915 • Use with a workshop bench vice • Convex & Double Lap flares to SAE & DIN • Dial-a-size turret design for ease of use • Lever cam action; quick flaring • Automatic punch extraction from flare • Screw clamp for accurate die alignment • 4.75mm & 3/16”

PISTON WINDBACK 35PCS ADAPTOR KIT Part No. ALB30844KIT

VERNIER CALIPER C/W DISC MEASURING ADAPTOR Part No. ALB40158

£110.00 List £181.17

£45.00 List £69.95

• ALB30598 Digital Vernier Caliper 0 - 150mm, with ALB40157 Brake Disc Measuring Tool • Measures thickness of brake disc without having to remove the wheel • Packaging: sturdy plastic case

• Set of 30x popular rewind adaptors, 5x common types of reaction Plate & Air Operated Piston Rewind Tool (ALB30843) • Suitable for use on most European & Japanese cars • Uses normal workshop compressed air supply (90psi)

• Push handle moulded into top shelf • 4" Brake Wheels x2 • 4" Moveable Wheels x2 • Will not scratch car finish • Dimension 575x460x900mm • Self assembly • 12 x Clear Plastic Internal Compartments – three different sizes • Storage compartments can be attached to belts, straps etc

[email protected] | www.albadiagnostics.com