alarm mode an in-depth guide. overview main module for loading configuration and monitoring system...
TRANSCRIPT
Alarm Mode
An in-depthguide
Overview
• Main module for loading configuration and monitoring system– Reader Open/Close– Arm/disarm zones– Control relays (& attached devices)
• Reads config & Writes events to/from the database
• Sends messages to other Alarm Mode stations
• Can be run on many PCs simultaneously
Main Screen
• Select function from toolbar or menu• Save/Load configuration• Right-click menus
System Menu
• Loading configuration to hardware
• User logout/lock
Commands Menu
• Global door mode change
• Cardholder location
• Reset APB
• Local video
Options Menu
• Display of message types
• Acknowledgement
• Map parameters
Reactions Menu
• Execute custom commands
Objects Control Menu
• Interface for manual control off objects
Plugins
• Hardware Status
• Check Point
• Guard Tour
• Visitor
Maps - Viewing
• Switching mode– Manual– Cycle– Priority
• Icon bar
Event Types
• Alarm State
• Middle State
• Normal State
Map Priority
• Each event has priority
• Affects what map is shown
• Priority can be changed
100 Denied Access –Duress Detected95 Duress Access90 Tamper Switch85 Power Problem85 Door Tamper Switch80 Device is Offline55 Alarm Zone is Switched to Active50 AUX Input is Active50 Door Forced Open45 Access Request (awaits for answer)40 Door Held Open38 Diddle (Card, PIN)35 Panel is Powered 35 Device is Online35 Alarm Zone is Switched to Inactive10 Access Denied9 Access Granted5 Operator Logins5 Operator Logouts
Message Acknowledgement
• Records that message was seen
• Can have other actions associated