AL NOORSolar-Pads

AL NOORSolar Powered

Outdoor Lighting Systems

Al NOOR Solar-Pads

• are the ideal solution for street and outdoor lighting due to their long life, directional light, uniform brightness and illumination.

• in a properly designed luminaire are dark sky friendly, eliminating stray light and reducing overall light pollution.

• for outdoor lighting are environmentally friendly as they contain no mercury.

• are efficient, autonomous LED street light systems, which do not require any electrical connections.

• are working independently from any electricity grid – there is no need to supply power cables to the lamp posts at site.

• do have an integrated high-performance solar module. The energy is stored into a maintenance free, weather-proof, corrosion and temperature resistant, leak-proof, powerful battery set for long-lasting periods of bad weather.

EPCA introduces an alternative way for efficient lighting control

A PIR-based (Passive InfraRed sensor) motion detector reduces the light output in times of low traffic.

Compared to normal installations it saves up to 70% of energy due to a solar charge controller for autonomous lamp systems with brightness control.

This reduces the light pollution significally, as animals and people need darkness to sleep, relax and regenerate.

Integrated Design

Heat Emission Holes

Solar Module

Battery

Motion Sensor

LED Lamp

EPCA‘s AL NOOR Solar-Pads are the intelligent solution for street lighting – independently of anyinfrastructure conditions

High energy efficiency: AL NOOR Solar-Pads lighting systems consume much less energy than sodium lamps, because of the LED technology – savings of about 40-50%. Due to the low power consumption not only the environment, but also the budget of cities and municipalities is spared.

Less light pollution:The light of the AL NOOR system can be aligned, to avoid unnecessary light pollution. This benefits not only the visibility of the night sky, but also many animals as well as human health.

Insects friendly:The light from light-emitting diodes (LEDs) looks unattractive to night active insects, they will be preserved from mass deaths at a hot lightbulb – in addition, expensive lamp cleaning is no longer required.

Long service life: While the commonly used sodium lamps only have a life-time of about 12.000 hours, the LED lighting system lasts for 80.000 hours. It‘s nearly five times extended than most conventional street lighting.

Self-contained supply:Ideal street lighting or bus stops illumination without extensi-ve and expensive electrical wiring. Rural areas can be easily supplied with lighting, thanks to integrated solar modules and battery units.

Options:

Yellow beam versions available for security areas or on bridges.

Hybrid versionExtended solution with a power line connection to take over when battery is discharged for security areas or on bridges.

AL NOOR AL NOOR L40 AL NOOR L50 AL NOOR L60 AL NOOR L80 AL NOOR L100 AL NOOR L120LED Power 12V 40 W 12V 60 W 12V 60 W 12V 80 W 12V 100 W 12V 120 WColor temperature Cool white 5000 - 8300k - daylightLight Distribution Warm white 2600 - 3700k - yellowLumen 4800-5200 lm 6000-6500 lm 7200-7800 lm 9600-10400 lm 12000-13000 lm 14400-15600 lmLight Distribution 120° 120° 120° 120° 120° 120°Charge time* 6 hours 6 hours 6 hours 7 hours 7-8 hours 7-8 hoursDischarge time** > 20 hours > 20 hours > 20 hours > 20 hours > 20 hours > 20 hours Working temp. -20~+60°C -20~+60°C -20~+60°C -25~+60°C -30°C~+60°C -30°C~+60°C Mounting height 6-7 m 6-7 m 7-8 m 8-10 m 10 m 12 mSpace Post / Post 20-25 m 20-25 m 20-25 m 22-25 m 22-25 m 25-28 mWeight 19 kg 21kg 23 kg 27 kg 38 kg 45 kg* (depending on Irradiance) **(saving mode)

AL NOOR experience matters

EPCA-Germany – experience matters

Advanced technology combined with face to face relationship and an in-depthunderstanding of customers needs – that’s what EPCA-Germany as a manufacturer of

Renewable Energy Systems, Thermal Cutting Machines and Automation Technology stands for.

Customers are companies active in Green Energy and Pure Water Supply, Steel Construction, Shipbuilding, Vehicle Manufacturing, Fabrication

and other Heavy Metal Industries – they all trust on the EPCA-Germany expertise.

EPCA-Germany GmbHHaagweg 3461231 Bad NauheimTel. +49 6032 93 86 232www.epca-germany.cominfo@epca-germany.com

AL NOORSolar-Pads

DesignedDeveloped and

Engineered in Germany

Renewable Energy • Cutting & Welding • Engineering • Automation