ahmed fathy cv
TRANSCRIPT
Ahmed Fathy Mohamed
PERSONAL INFORMATIONS
Date of Birth: 07/05/1979Nationality: Egyptian.Permanent address: Elmaahad Eldiny Street, Ain shams, Cairo, EgyptTel: +202 21874710Cell phone: +2 0100 20 95 761Email: [email protected] Status: Married.Military status: Completed
EDUCATION (1996-2001) Helwan university (graduation grade: good) Faculty of engineering electrical power department
LANGUAGE SKILLS
Arabic: Mother TongueEnglish: Excellent (written, reading & spoken)
SUMMARY OF QUALIFICATIONSI am fast leaner and I have the ability to work under pressure and meet deadlines, also I have high presentation and communication skills and have ability to take decisions under pressure and ability to lead a team and work in group to meet the job requirements.
EXPERIENCEFrom July 2014 till Now
Company: Reliance Heavy Industry (RHI) Job title: Senior Electrical Engineer Scope of work :
Tender Documents Preparation, Invitation and instructions to bidders, Setting the criteria and procedures for evaluation of suppliers and contractors
Tenders evaluation and negotiations including detailed analysis of bids received, guarantee and performance testing conditions evaluation, study of vendors and sub-vendors and sub-contractor's list to ensure quality of deliverables.
Projects technical specification preparation Electrical design review for basic and details engineering for all electrical and
instrumentations items such as single line diagram, power demand calculation, consumer list, sensor list, cable list, instruments flow sheet,earthing and lightning calculations, electrical panels details engineering,…..etc.
Purchase documents review for all electrical equipment such as cables, motors, switchgears, variable frequency drives, transformers, diesel generators,…etc.
Page 1
Clients and projects
El Arish Cement Factory (GOE) line 3&4 Wadi El Nile Cement Factory new coal mill Sinai Cement Factory new coal mills South Valley cement Factory new coal mill
From Jan 2013 till July2014
Company: Orascom Construction Industries in Iraq (OCI) Job title: Lead Electrical QA/QC engineer Project: Baiji Power plant (6x160MW) Iraq
Scope of work :
Prepare Inspection and testing plan (ITP) and check sheets for all electrical and instrumentation activities
Materials verifications according to drawing sand project standards and codes. Monitoring on daily site work and Submit daily reports and documents of activities to
QA/QC Manager Work planning and progress follow up Preparing the commissioning schedule and follow up the commissioning activities Review the sub-contractors submitted invoices according to the completed tasks Issuing the NCR for any non-conformance Prepare the turn over package to the client Follow up the electrical quality team Site construction and technical supervision for the electrical installation activities such
as power transformer 220MVA and distribution transformer 10MVA, switchgears, field instrumentations, I/O panels, black start diesel generators, start-up transformers, gas turbine skids and instrumentations, 400KV GIS 8 Bays and transmission, cable laying and termination, lighting and earthing,…etc.
From January 2010 till December 2012
Company: Orascom Construction Industries in Algeria (OCIA) Job title: Senior Electrical QA/QC engineer Project: Sorfert fertilizer complex ammonia/urea (Algeria)
Scope of work :
Prepare Inspection and testing plan (ITP) and check sheets for all electrical and instrumentation activities
Materials verifications according to drawing sand project standards and codes. Monitoring on daily site work and Submit daily reports and documents of activities to
QA/QC Manager Work planning and progress follow up Preparing the commissioning schedule and follow up the commissioning activities Review the sub-contractors submitted invoices according to the completed tasks Issuing the NCR for any non-conformance Prepare the turn over package to the client Site construction and technical supervision for the electrical installation
activities such as GIS 60KV and underground cable installation and testing, power and distribution transformer up to 30MVA, neutral ground resistor, LV and MV
Page 2
switchgears, MV and LV motors, variable frequency drives, UPS, Battery chargers, field instruments (pressure,tempreture,levels,…etc.) transmitters and indicators,...etc.
Perform field inspection and testing according to ICAPS system (Integrated Commissioning and Progress system)
From May 2007 till January 2010
Company: Bureau Veritas Egypt (BV Egypt)Division: Inspection and verification services IVS department Job title: Senior Electrical inspection engineer
Scope of work :
Cables (LV, MV cables up to 30KV) inspection FAT test as 3rd party according to IEC60502-2
Check the electrical resistance of the conductor Partial discharge test Power frequency test voltage Sample test including conductor examination and dimension, hot set test and
voltage test and voltage test Tan δ test and impulse test
Clients and projects
Petrofac company (Khalda Gas Plant) New Doha airport Aramco petroleum company Degremont (Elgabal el Asfar) Orascom Construction Industries (Sorfert project algeria) Saint gobain glass factory
MV Switchgear inspection FAT test as 3rd party according to IEC62271-200
Visual check for the component according to the design documents Di-electric test on auxiliary and control voltage Power frequency withstand voltage test Mechanical operation test by verifying the switching devices, interlocking and
withdrawable parts 5 times Contact resistance test for CB Perform CT and VT testing Function test for switchgear according to the wiring diagram
Clients and projects
Odebrecht company (Doraleh container terminal project)
Page 3
Orascom Construction Industries (Sorfert project Algeria) Degremont (Elgabal el Asfar project)
HV air Circuit breaker inspection FAT test as 3rd party
Visual check for the component according to the design documents Five times closing and tripping at rated, 110% and 85% of rated voltage Check close and tripping time Contact resistance measuring Check SF6 gas pressure values at normal, alarm and trip functions Power frequency test
Clients and projects
Iberdrola company (Kuraymat project)
Electrical installation, start up and commissioning as 3rd party
Check the installation and testing of the all electrical systems
Clients and projects
Bell Egypt factory IBIS hotel (Muscat,Oman) Movinpic Jeddah (Saudi Arabia) SEEI Company : ( El Zeina Factory at 10th of Ramadan) Schlumberger (Western Geco facility ) Cepsa petroleum company (Administration building) Coca-Cola company (Administration building) Multinational force &observers camps sinai (MFO) Palm hills project (6th of October)
From October 2002 till May 2007
Company: Asec Automation (ASA) Division: Technical department Job title: Electrical design, start-up & commissioning engineer
Scope of work :
Low voltage switchgear, marshalling and PLC panels design
Prepare the load list for the low voltage switchgears Prepare the signal list according to the flow sheet and the interface local panels Prepare the technical purchasing order for the required material Preparing the single line diagram and control diagram
Page 4
FAT (Factory acceptance) test for panels
Visual check for the panel dimension, materials, rating of CB and labels identification.
Perform the DC insulation test for the panels Function check for the panel according to the wiring diagram Prepare the as manufacturing documentations
Testing, Commissioning and start up
Testing for (LV,MV) Cables by continuity check, insulation test and HI-POT testing for the MV cables
Performing the signal test and loop check for all consumers, instruments and local panels
Testing the distribution transformers (2500 KVA, 8 MVA & 10 MVA) by performing the visual check, turns ratio, vector group, no load test, winding resistance, Meggering test and function check for all interface signals from the transformer instruments
Testing the LV & MV switchgear by performing Visual check, wiring check, bus bar torqueing, mechanical check for movable parts, check all mechanical interlock, check the interchangeability, check the CT ratio and direction, Check VT ratio and polarity and check the protection relays
Testing (LV,MV) motors by performing insulation check, signal test at test position and cold run for the motors
Testing and start up for LV variable frequency drives and soft starter
Clients and projects
Cement mill 2 upgrading (Lafarge cement factory, Amman, Jordan) Cement mill upgrading (Lafarge cement factory, rashadeyah, Jordan) Crusher upgrading (Lafarge cement factory, rashadeyah, Jordan) New cement silo (Sinai white cement factory) Russian compressor upgrading (Assuit cement factory) Cement mill 7 & 8 upgrading (Assuit cement factory) Water pump station line 1 upgrading (Assuit cement factory) Kiln increase capacity line 3 (Assuit cement factory) Line 1 upgrading (Ammreyah cement factory)
Page 5