ahmed fathy cv
TRANSCRIPT
Instrument & Control Engineer
Ahmed Fathy Ahmed
Faculty of Engineering,
Alexandria University, Electricity Department, Communication Major
Objectives
Combine my graduate studies, technical certificates, professional work experience and computer
skills to achieve a challenging career in Reliability, Training and Maintenance Management.
Summary
9 years of professional experience in instrumentation maintenance, automatic control
troubleshooting, installing equipment for monitoring and controlling engineering systems
In-depth knowledge of data sheets, instrument drawings, I/O wiring diagrams, P&IDs, data
sheets, manuals, calculation and specifications
Personal Details
First Name Middle Name Family Name
Ahmed Fathy Ahmed
Birth Date Place of birth Nationality Gender Marital Status
11-7-1981 Egypt Egyptian male Married/2kids
Military Status phone E-mail Address
Completed (30 Months) 002-01005077148 [email protected]
Address: 8 karam st. – Shods - Elramal, Alexandria.
Education Bachelor’s Degree in: Electrical Engineering
Department: Communication & Electronics Department
Faculty of: Engineering
University: Alexandria
Graduation Year: June 2003
Instrument & Control Engineer
Languages: Arabic: Native.
English: Fluent.
:Experience Training
Instrument Trainer at PETROMAINT in MIDOR oil refinery.
Instructor at Alpha-Tech Training Center in:
- Instrumentation.
- PLC S7-200.
- PLC S7-300.
- Classical Automatic Control (Relay Control).
Present Work: Period : from 9/2009 till now
Alexandria Petroleum Maintenance Co. (PETROMAINT)
Job Title: Instrument & Control Engineer
Project: MIDOR Refinery Alexandria Responsibility:
i. Follow up Instrument Maintenance Program corrective & defective for Global
Maintenance Program.
ii. Follow up all field Instrument Level, Flow ,Temperature, Pressure Transmitters &
Indicators , Control Valves & all attachment equipments , Safety Valves , Switches,
Multiplexers ,Planned & Un-Planned Maintenance in the Production units.
iii. Make Calibration tests of the Planed & Un-Planed instrumentation Valves,
Sensors and Transmitters.
iv. Review work orders and determine maintenance and repairs priorities in
consultation with related sections. Prepare detailed work programs of
preventive maintenance schedules for instrument, in conjunction with the
other sections and the other plant areas.
v. Lucky to be in the team of the SAT of MIDOR DCS Modernization project
with Honeywell vendors and made most of I/O’s functional test and loop
check.
vi. Maintenance and solving the problems For the control systems hardware &
software:-
PLC Siemens Sematic S7, Good handling with different modular CPU’s, I/O
cards and the communication between systems through the different paths
(Profibus, MPI).
Experience: Period : from 8/2008 to 9/2009
Alexandria Petroleum Maintenance Co. (PETROMAINT)
Job Title: Instrument & Control Engineer
Project: Northern Pipeline Compression Plant (NPCP) Project in brief: Installation of no. 4 Gas Compressor Trains
C/N: All relevant Instrumentation which include:
i. The installation of all Instruments.
ii. The installation of Fire Alarm and Fire Fighting system.
iii. Hook-up for Continuity test & loops check.
iv. Pre-Commissioning & Commissioning and start-up.
Instrument & Control Engineer
Project: General Petroleum Company (G.P.C) Project in brief: Installation of Addressable Fire Alarm and Fire Fighting system (NOTIFIER)
for 4 Gas turbines.
C/N: All relevant Fire Alarm and Fire Fighting system which include:
i. The installation of Smoke and Heat detectors.
ii. The installation of Flame detectors and its monitor modules.
iii. The installation of Gas detectors and its Detection controllers.
iv. The installation of 4 local fire panels , 1 main panel and its MIMIC panel
v. The installation of Fire Fighting Control Modules and spelunkers.
vi. Pre-Commissioning & Commissioning and start-up.
Period : from 3/2008 to 8/2008
CALIK Alexandria for Ready Made Garments (Turkish Co.)
Job Title: Instrument & Control Engineer
Job Description: Sharing with Turkish Vendors on establishing the factory of
the following systems:
i. The installation of Control systems to all machines.
ii. The Supervision of Programming of all PLC’s at the factory with Turkish Vendors.
iii. The installation of the control system of the Boilers.
iv. The installation of the control system of the Air Compressors.
v. The installation of Fire Alarm and Fire Fighting system.
vi. Pre-Commissioning & Commissioning and start-up.
Period : from 1/2007 to 3/2008
Egyptian Navigation company
Job Title: Instrument & Control Engineer
Job Description: Worked at Automatic Control systems
i. Generators (Auto start, Alarms and Auto shutdown)
ii. Boilers, Compressors (Alarms and Auto shutdown)
iii. Fire Alarm and Fire Fighting system.
Period : from 4/2007 to 3/2008
Advisory Office for Electronic and Electrical Engineering (Part Time)
Job Title: Automation Engineer
Worked at Testing, Fixing, Making PCB and installing it into ships.
Period : from 7/1/2007 to 31/3/2007
Alexandria Smart Solution Company (Part Time)
Worked as database Administrator using:
- SQL Server (Triggers, Stored Procedures)
- Visual Basic.Net (ADO.Net).
Period : from 12/7/2004 to 31/12/2006
Egyptian Army Strategic
Worked at Electronics maintenance department in Air Defense Forces.
Instrument & Control Engineer
Personal Skills:
Automation: - SCADA WINCC SIEMENS Certificated from Faculty of Engineering, Alexandria University.
- Advanced Programming PLC SIEMENS S7-300. Certificated from Faculty of Engineering, Alexandria University. - ADVANCED PLC (S7-300 & S7-400)
Certificated from Middle East Human Resources Development Training Center. - PLC Basic (S7- 200, S7-300 & S7- 400)
Certificated from Middle East Human Resources Development Training Center. - Familiar with SIEMENS HMI “WINCC Flexible”. - Familiar with S7-200 SIEMENS PLC. - Familiar with LOGO SIEMENS PLC.
Instrumentation: - Final Control Element
(Certificated from Egyptian Syndicate of Engineering)
- Industrial Instrumentation (Certificated from Egyptian Syndicate of Engineering)
- Familiar with PNEUMATIC systems.
- Familiar with engineering documents (P&ID, DATA SHEET,
and Hook-up etc.).
PCB: - Using Proteus professional 2007 (Iziz & Ares) for routing and placement
electronic components and tracks at the Printed Circuit Board.
- Work with photo printed boards and simple copper printed boards.
- Have many applications at this field.
Additional Information:
Good skills in organizing project, contacting people, projects
management
Predisposition to learn any new techniques or software the work
request.
Have Driver's License.