agilent film holder accessory ssory for the cary 100/300/4000/5000/6000i /55000… ·...
TRANSCRIPT
The Agilent fi lm holder accessory can be used to test the homogeneity of a sample, as it scans across the sample, measuring the %T or Abs as a function of distance. It is a versatile accessory, designed for use with the Agilent sample transport accessory. The fi lm holder accessory provides a vertical mounting capability for fi lms, gels, sheets of material or multiple fi lters, allowing photometric measurements across the sample, so a plot of photometric mode (A, %T) versus position along the sample can be easily generated. The fi lm holder accessory is equipped with a wide variety of mounting options, with the large number of mounting holes providing fl exibility in sample size.
AGILENT FILM HOLDER ACCESSORYFOR THE CARY 100/300/4000/5000/6000i UV-VIS-NIR SPECTROPHOTOMETERS
Automated multi-fi lter and fi lm homogeniety measurements
For more information:www.agilent.com/chem
SSSSOORY/55000/6000METERS
niety measurements
0i
Agilent Products are for Research Use Only.Not for use in diagnostic procedures.
Information, descriptions and specifi cations in thispublication are subject to change without notice.
© Agilent Technologies, Inc. 2013Published in USA, April 1, 2013
5991-1718EN
Additional Accessories
Required Extended sample compartment, Sample transport accessory
Optional None
Specifi cations
Instrument Cary 100/300/4000/5000/6000iWavelength range Equal to host instrumentMaximum sample size
Cary 4000/5000/6000i:160 x 160 mmCary 100/300: 90 x 100 mm
ApplicationsThe fi lm holder accessory can be used to perform many measurements, and is particularly useful where intra- and inter-sample variability is of interest.
Sample Example measurementPhotographic fi lm Intra-sample homogeneityBandpass fi lters Inter-sample variability Optical components Defect rates
For more information:
www.agilent.com/chem
Schematic of accessory showing direct transmission (green) of incident light (black)