agile switch overview 2012 07-13
DESCRIPTION
TRANSCRIPT
Power Electronics for Renewable EnergyJuly 2012
04/10/2023 1(c) 2012 AgileSwitch, LLC
Renewable Energy/High Efficiency Trends
• Solar/PV installations to reach 24 GW, up from 19 GW in 2010. (IMS Research)
• Wind power installations will increase from 236 GW in 2011 to 563 GW in 2017. (Pike Research, 2011)
• 5 million cars manufactured in 2016 will be full HEV, plug-in HEV or EV. (Yole Développement, 2011)
04/10/2023 (c) 2012 AgileSwitch, LLC 2
Renewable Energy/High Efficiency Applications Have Increased Cost and Performance Requirements For IGBTs
• Decreased $/Watt • Higher current and voltage requirements• Faster switching speeds• Increased heat sensitivity• Higher efficiencies• Reducing switching
losses
3(c) 2012 AgileSwitch, LLC04/10/2023
AgileSwitch Gate Drivers Were Developed to Address These Requirements
AgileSwitch leverages high speed FET driver technology, advanced magnetics, and digital logic expertise to
provide maximum switching performance and reliability for IGBTs.
04/10/2023 (c) 2012 AgileSwitch, LLC 4
AgileSwitch Drivers Are Perfectly Matched for Industry Standard IGBTs
• Designed from the ground up to Plug and Play with industry standard high power IGBT modules.
• Delivers more power than competitive gate drivers–only plug and play solutions available for 450A and 600A Econodual.
• Component and software configurable.• Industry standard components reduce lead times.• Developed specifically for the following applications:
Solar/PV Inverters Wind TurbinesMotor Drives UPS/StorageHEV/EV InductionHigh Speed Trains
04/10/2023 (c) 2012 AgileSwitch, LLC 5
Key Driver Benefits
• Higher peak drive current capability, higher wattage ratings, higher voltage ratings, and superior dV/dT immunity.
• Lower idle power with efficient gate charge delivery to compliment the cleaner power switching of IGBTs.
• Advanced fault monitoring and control available:– Digital Desaturation Detection—no more RC time constants– Separate HI and LO Faults, All Faults– UVLO– Cross Latch/ Cross Over– Temperature
04/10/2023 (c) 2012 AgileSwitch, LLC 6
AgileSwitch Key Driver Features
04/10/2023 (c) 2012 AgileSwitch, LLC 7
Minimum On and Off periods Plug-and-play solution Isolated DC/DC converter Interface for 3.3V, 5V or 15V logic levels
Regulated gate-emitter voltage +15V/-10V gate drive voltage Separate gate current paths
(on/off) Suitable for IGBTs up to 1700V
Power supply under-voltage lockout (Opt.)
IGBT short-circuit protection
Reliable, long service life Easy mounting directly onto the IGBT Up to 8 individual fault signals
(Opt.) Fault lockout functionality (Opt.)
IGBT and ambient thermal fault detection (Opt.)
Monitor under voltage, overshoot, desaturation (Opt.)
Drivers can be Configured to Optimize the Application
04/10/2023 (c) 2012 AgileSwitch, LLC 8
• Configurations based on component changes or CPLD Programming – no need for custom PCBs
• Options may include:• Desaturation time• Deadtime• Fault outputs
• Soft turn-off time• Gate resistance• Connectors
AgileSwitch Product Line
04/10/2023 (c) 2012 AgileSwitch, LLC 9
Series EconoDualTM PrimePACKTM HPM
Voltage 1200V1700V
1200V1700V
1200V1700V
Currents 225A – 600A 600A – 1400A 800A – 3600A
Master/Slave Options for Intelligent Paralleling
04/10/2023 (c) 2012 AgileSwitch, LLC 10
• Master/Slave technology allows the gate drive signal to be split at the last possible location. This minimizes the propagation delay between different drivers enabling better performance and reliability.
• Lower cost Slave drivers permit significant system cost savings.• The inductance of the cable is negligible due to the low current being
pushed across it. (~0.5 A)
Master DriverSlave Driver 1
Slave Driver 2(optional)
Why AgileSwitch?
• Drivers are complex and challenging to develop– It’s what we do
• We tailor the driver for the application…– Optimize for switching speed and efficiency– Monitor and control fault conditions– Match connectors to your application
• …improve IGBT system qualification and performance– Standard Plug and Play for immediate use– Designed from the ground up for easy optimization– Shipped with customer specific gate resistors– Short lead times– Produced in the USA
04/10/2023 (c) 2012 AgileSwitch, LLC 11
How to Get Started
The following key questions help us get started:1. Model numbers of IGBTs in use or considered?2. Operating frequency (kHz) – Maximum and nominal?3. Post Header Connector requirement – Fiber or electrical,
and preference?4. Interface I/O signal voltages?5. Are the IGBT being driven in parallel? If so, how many? (2
or 3?)6. DC-Link Inductance level?7. Any industry specific requirements?8. Estimated annual usage?
04/10/2023 (c) 2012 AgileSwitch, LLC 12
Data Sheet, Spec Sheet and Intake are On-Line
• Data Sheet and Spec Sheets can be found on the Products page: http://www.agileswitch.com/products.page
• Intake Form can be found on the Contact US page at: http://www.agileswitch.com/Contact-us.page
04/10/2023 (c) 2012 AgileSwitch, LLC 13