agiecut classic-the success in ed wire cutting · agiecut vertex, the most successful ed...

AGIECUTCLASSIC

The success in ED wire cutting

impCLASSICv-E-21.03.06 18.5.2006 8:39 Pagina 2

The machine

2With a new design, the proven IPG-V generator, a new optimised operator surface and many standard extras from the

Agiecut Vertex, the most successful ED wire-cutting series is experiencing a further impetus for more performance,

more precision and convenience. New toroids act when taper cutting, allowing an increased wire tensile force, thus benefit-

ing the shape accuracy and surface quality. An extension kit is available for all Classic V models for thinner wires down

to 0.07 mm and an SF module for roughnesses below Ra 0.1 µm.

for economic

ED wire cutting

Agiecut Classic V

Agiecut Progress V

Agiecut Vertex


3


2X 350

Y 250

Z 256

550 750

250

450 kg

20401640


3X 500

Y 350

Z 426

650

1050

420

800 kg

1940 2300


Optimal technologies With a few data inputs, the best possi-ble technology is generated individu-ally for every machining job and work-piece height.

Maximum shape accuracyWith Wire Bending Control and AdvancedWire Offset, all Agiecut Classic V ma-chines have functions fitted as standardfor the best linearity for every work-piece height, for stepped workpieces,for tapered cuts as well as for preciseinterior radii, even with complex transi-tions.

HighlightsFinest surfacesA surface quality of Ra 0.2 µm isachieved as standard with all AgiecutClassic V machines. The SF moduleoption makes it possible to have rough-nesses down to less than Ra 0.1 µm.

Thinner wiresWith an extension kit, wires down to0.07 mm can be used. All AgiecutClassic V machines are designed forwires with 0.15 mm as the smallestdiameter as standard.

for successful ED wire cutting

6

The proven Vertex IPG-V generatorwith a very high operating efficiencyand also the Agievision control sys-tem in version 5 are common to allmodels in the Agiecut series. Thenew outputs of the Classic V ED wire-cutting machines are:

AGIECUTCLASSIC

High speedsWith the IPG-V generator, cuttingrates of over 300 mm2/min in full cutare reached on all Agiecut Classic Vmachines.

Specific planningWith the AgiePlanning function, allAgiecut Classic V machines have anoptimal instrument at their disposalfor job planning.

from 0.33 mm

to 0.07 mm

Height 100 mm 30°

Specific planningWith the AgiePlanning function, allAgiecut Classic V machines have anoptimal instrument at their disposalfor job planning.

The latest hardwareWith the Version 5 of the Agievisioncontrol, all Agiecut Classic V ma-chines have fast and efficient proces-sors with state-of-the-art electronics.

Functional softwareWith intuitive icons, additional textexplanations and a clear form of rep-resentation, the operator surface hasbeen strikingly optimised. The opera-tor’s manual is resident in the harddisk storage.

to Ra 0.1 µm


The generatorIntelligent generator With IPG-V (Intelligent Power Genera-tion Vertex), an increase in the pulses’shape factor and shortening of thepulse duration are achieved. In thisway, the EDM performance is en-hanced and, thanks to powerful elec-tronics, the EDM process can be effi-ciently controlled.

Individualised technologiesWith Teccut, ED wire-cutting tech-nologies are generated individuallyaccording to the workpiece features.For this purpose, the workpiece is de-scribed with its height, shape, materi-al, surface quality and accuracy. Teccut then generates the best possi-ble cutting technology from a data-base of pulses, and no longer from atechnology database, and in additionmakes alternative proposals for thequality targets. Teccut selects thepulses for the full cut according tomaterial and quality target. Buildingup on this first technology, the pulsesfor the trim cuts are called in via al-gorithms and then adapted individual-ly to the actual working conditionsand the required precision. A machin-ing to measure, without any compro-

mises with respect to workpieceheight, precision or cutting rate.Whether brass or coated, whetherthick or thin, with every type of wire,both maximum cutting rates areachieved in full cut and surfaces ofthe finest and best precision in trimcut. ED wire cutting that gives thecertainty of reliably achieving the re-quired result without having to maketrial cuts.

Controlled processWith state-of-the-art FPGA (FieldProgrammable Gate Arrays) technol-ogy and completely digital datarecording, the EDM process can bequickly recorded and continuously op-timised with a precise servo. In thecourse of this, the current processstate is measured as close to thespark as possible and, thanks to theenormous computer throughput, keptcontinuously at an optimum level.

8

with Vertex technology

Balanced profitabilityWith eCut technologies, wires of from0.1 to 0.15 mm diameter can be usedand thus high cutting speeds achieved.eCut technologies reduce the filterand resin consumption strikingly, andcut down the use of both coated andbrass wires. Fewer deposits of mate-rial from the wire on the workpiecereduce the number of trim cuts. Cut surfaces on workpieces have ahomogeneous finish according to theroughness value. eCut technologiesreduce the spark gap in the case offine machining jobs so that absoluteaccuracy is realised in the case ofcontours and smallest inside radii.Even in the case of a fixed feed, thespark gap is regulated in order toreliably achieve the best precision.

The generator and in particular thecontrol of the impulses are fullydigitised. Analog electronics havebeen combined into one single digi-tal component. This contains a mul-titude of individual components andis programmable. Changes can thusbe implemented by means of soft-ware technology, without having tochange the pc boards. Innovationscan be introduced immediately.

AGIECUTCLASSIC

Precise full cutWith individually generated technolo-gies, precision full cuts can be car-ried out which, according to the pre-cision and surface quality required,can reduce the number of trim cutsor even allow them to be completelydispensed with.

Less power consumptionWith the IPG-V generator, the energypower consumption falls strikingly.


Ra = 0.20Ra = 0.20Ra = 0.20Ra = 0.20

Ra = 0.20Ra = 0.20

Ra = 0.20Ra = 0.20

Taper-Ra = 0.50Taper-Ra = 0.45

Ra = 0.20Ra = 0.20Ra = 0.20Ra = 0.20

Ra = 0.20Ra = 0.20

Ra = 0.20Ra = 0.20

TpA-G 0.25Br-H 0.25TpA-G 0.20Br-H 0.20TpA-G 0.15Br-H 0.15TpA-G 0.10Br-H 0.10

Tp-SCC 0.20Tp-A 0.20

TpA-G 0.25Br-H 0.25TpA-G 0.20Br-H 0.20TpA-G 0.15Br-H 0.15TpA-G 0.10Br-H 0.10

0 5 10 20 50 70 100 150

Height (mm)

Carb

ide

Stee

l

Workpiece adapted machining. With

fiew inputs of workpiece wire and

quality target, a accurate adapted tech-

nology is generated. No compromises

in respect to workpiece heights.


The generatorwith exclusive functions

10

Fast machining With IPG modules from the proven,fully-digitised Vertex generator,roughing impulses are adapted opti-mally to the wire diameter. In thisway, fine roughnesses and highspeeds are achieved.

Accurate linearity With AWO (Advanced Wire Offset) theinfluences of wire wear and flushingare technologically compensated.The contour accuracy and cylindricitythus become nearly perfect.

In combination with the IPG-V heavyduty generator, exclusive functionsincrease the precision on the work-piece. From a control technology as-pect, physical and process-inducedinfluences are continuously regulat-ed and optimised. The impulses’operating efficiency is thus purpose-fully translated into precision-givingresults.

AGIECUTCLASSIC

Highest shape accuracyWith Wire Bending Control, the later-al, process-induced wire deviationsare determined in real time and cor-rected by process control in such amanner that, even with high cuttingrates, the best accuracy and linearityare achieved on the whole contour.WBC reliably meets the precisionand roughness target input into thecontrol system at every point alongthe contour cut – both on cylindricaland on tapered and stepped work-pieces.

With WBC

Without WBC

Fullspeed through contoursWith Dynamic Corner Control, cor-ners and radii can be cut precisely infull cut at maximum speed. Physical-ly induced contouring errors by thewire in the direction of cut are contin-uously corrected and the wire pathdynamically optimised. As a result,the quality of the full cuts is improvedmeaning that trim cuts can be car-ried out faster or reduced in number.

Automatic power adjustmentWith Variocut, stepped workpieces orworkpieces with openings can be cutat optimum speed as the cut cross-section is continuously recorded andthe power is automatically adjustedto the changed conditions.


11

190 mm

AU

TO

MA

TIC

420 mm

2

3


AGIEVISION

Efficient hardwareWith a 40-GB hard disk, a 1.1-GHzPentium Processor and up to 1 GB RAM,a high storage capacity and computerperformance, as well a low energyconsumption are ensured. There are 2 USB connections as well as a unit for CDs and DVDs available for dataexchange. A flexibly installable consolewith a large LCD screen, keyboard andmouse make non-fatiguing data inputpossible.

Newly structured operator surface With Agievision 5, the well-tried 3-win-dow structure has been retained, giv-ing a complete overview at all times. A new operating bar simplifies prepa-ration of the EDM program. All impor-tant activities are represented on itusing large, intuitive icons. The iconsdisplay the active or passive state dy-namically with colours. The main activ-ities can be directly selected, and thecurrent situation can be seen at aglance.

Result-oriented data inputWith Easywork, just the required sur-face quality, contour tolerance, work-piece material and height, as well asthe wire type are input. The controlsystem adapts itself to these settingsand then generates the machiningtechnologies and sequences auto-matically.

No manual fine adjustingWith Agiesetup 3D, the workpiece po-sition in the working area is deter-mined three-dimensionally, automati-cally by measuring cycles by meansof the EDM wire and a touch probe.The control system takes any possibleoffset in the room into account andallots the new reference values to thegeometry program independently.

Retrievable machining patternsWith Workmodel, recurring machiningtasks can be filed as a model or modi-fied for similar jobs. A user-specificdatabase for expert ED wire cutting.

AG

IEVI

SIO

N

12

The control systemfor reliable results

Agievision is a control system spe-cially developed for ED machiningthat speaks the language of work-shop. With Version 5, the operatingconvenience has been further im-proved. A few data inputs suffice inorder to prepare the EDM programpurposefully – with the Microsoft®

Windows® just like on your PC athome.

Visionary certaintyWith Formalcheck, the data input iscontinually checked for complete-ness. Missing inputs are displayed inclear text. With Graficheck, the ma-chining can be visualised as a 2D and3D simulation program, together withthe process status, in a window.Functions which give certainty for thewhole machining job.

Easywork Formalcheck

Agiesetup 3D


13


Data input adapted according to organisationWith Agievision the data input cantake place flexibly in accordance withthe infrastructure of the workshop theenvironment: - All data can be directly input on themachine.- Geometries are imported and com-pleted with the target data on the ma-chine.- Geometries and target data are im-ported and completed on the machinewith measurement and position data.- All the workpiece data, including themeasurement and position data areimported directly on to the machine.

Shortened non-productive timesWith the selectable threading mode:Highest speed (8 - 15 seconds), highestcertainty or a combination of both. Withthe selectable positioning mode: De-pending on the application, one or morepossibilities for optimising can be used.

AGIEVISION

EDM-specific Job Management SystemWith Agievision, priorities can be setflexibly and changed at any time di-rectly on the machine. With the Lottofunction, several workpieces can becombined and optimally managed inone lot.

Problem-free job insertionWith Pieceinsert, in order to carry outan express job, first of all the actualsituation of the machining job in handis determined, including the cuttingsequences, and then, after comple-tion of the express job, it is then re-sumed exactly where it was inter-rupted. Without changing or insertingdata sets.

Flexible prioritiesWith Usersequence, the cutting andmachining sequences of workpiecescan be arranged and selected ac-cording to priorities directly on themachine, even shortly before ED ma-chining, without having to fall back onexternal CAM systems. During EDmachining, cutting sequences canthen be determined in accordancewith time criteria using the Early/Latefunction (e.g. EDM start in theevening and removal of the drop-outparts in the morning) or self-defined.

14

The control systemfor flexible planning

ED wire cutting is intended to beable to be employed flexibly for themost varied machining jobs in accor-dance with the workshop’s everydayrequirements. The Agievision controlsystem fits in with this with time-saving and productivity-enhancingmodules.

Remote monitored ED wire cuttingWith Agievision, the current EDM jobcan be checked at any time from youroffice or home. The PC is in onlinecontact with the ED wire-cutting ma-chine and every phase of machiningor the current performance efficiencycan be checked and optimised.

Foresighted job planningWith Agieplanning, by means of asimple job description, the EDM timeand the wire consumption as well asthe number of minimum radii are cal-culated directly on the machine or thePC. Agieplanning is the ideal modulefor planning without complicated cal-culation of contour lengths or cuttingrates.

Identical data input on the PCWith Agievision PC, the data input foran ED wire-cutting job can take placeon your PC at home or in your office.All the input and function pages areidentical to the Agiecut Classic V.


AgiegeoSoftwaremodule to create or mod-ify 2D contours on board. Importand export of DXF and IGES files.

Pieceinsert Usersequence Processcontrol

Graficheck

15

1 2

2 1


Long running timesWith standard wire spools up to 25 kgas well as the unique service lives ofthe wearing parts, an optimum num-ber of machine hours is achieved.

Simple wire changeWith the combined wire-guide andthreading system for all wire diame-ters, no further, expensive wireguides are required for other wire di-ameters. Wire changing can be car-ried out without mechanical aids.

Reliable wire threading With Agiejet, the machine can be fullyutilised in reliable night and weekendoperation. Agiejet threads reliable for multiple clampings, for severalcontours in one workpiece or in thecase of a broken wire (even wires of0.07 mm diameter), thus creating theprerequisite for autonomous, auto-mated ED wire-cutting operation.

16

The mechanismfor high operating convenience

Agiecut Classic V ED wire-cutting ma-chines can be easily operated thanksto both their software and theirmechanism. An optimal interaction ofmechanism, electronics, pneumatics,kinetics and computer science makethe machine into an operator-friendlydesign element for wire changing, for setting up, for threading or for ac-cessibility.

6 kg

25 kg

Good accessibility With the well thought out spacearrangement, all the relevant mod-ules for maintenance and wear areeasily accessible. Therefore, filters,deionising resin, wire-cutting blades,power supplies, nozzles etc., can beeasily exchanged in the shortest time.

Convenient setting upWith Agiejogger, all phases of settingup can be carried out conveniently.The handbox with its electronic hand-wheel and LCD display has all theimportant control functions availablefor this.

AGIECUTCLASSIC


X, Y

Space-saving doors With an ingenious mechanism, themachine doors can be swung out andpushed on rollers parallel to the ma-chine to the rear. The door of theworking area can be simply pusheddown by means of the rocker-arm rod.

Flexible ClampingThe standard clamping frame is de-signed to handle multi machiningswith ease and comfort. Optimal use of the workzone without expensivetooling.

17


Certified quality Every Agiecut Classic V is measuredby laser and must then ED machinea pallet with practice-related inspec-tion pieces. The machine is suppliedwith an integrated quality certificate,thus also proving the time taken forthe complete certification of anAgiecut Classic V, which is almosttwice as much as that taken for theactual assembly.

Exemplary compact construction The machine, control system, gener-ator and dielectric unit are integratedin a space saving manner in the fullyencased system. Agiecut Classic Vmachines are delivered as a whole ona frame with rollers. The machinecan thus be manoeuvred with littleeffort and, thanks to its small floorspace requirement, finds its placeeven in narrow rooms. The commis-sioning is as simple as possible witha total of just 4 connections.

Long-lasting mechanical components High static and dynamic rigidity is en-sured by the C-frame construction inthe cast version. High-precision,large-dimensioned recirculating ballspindles, as well as prestressed,closed and also large-dimensionedguides on all axes ensure a longworking life and high precision on theworkpiece.

Optimal thermal behaviour All the heat occurring in the ED wire-cutting system is removed by thecooling water. The cooling of the gen-erator, control system and dielectricis regulated by heat exchangers.

Increased wire tensile force During tapered cutting, the wire tensileforce can be increased by a changedgeometry of the toroids. The wire liesoptimally on the toroidal wire guides,can be guided more tautly, thus im-proving the shape accuracy and sur-face quality in the case of taperedsurfaces.

Reliable wire chopperUsed wires are disposed of simplyand reliably by the integrated wirechopped and electromagnetic radia-tion is avoided.

Electromagnetic screeningWith their fully encased architecture,Agiecut Classic V machines complywith all safety regulations. Internation-al and EU standards are met in full.

18

The mechanismMade in Switzerland

Agie’s pioneering production man-ufactures all the mechanical andelectronic components itself thatare relevant for accuracy. By meansof a unique system, measurementvalues and test results are storedin the Agiecut Classic V controlsystem already during assembly.Machine-resident measurementdata which bear witness to the highproduction quality and can be re-trieved by specialists at any time.

AGIECUTCLASSIC


19


20

AGIECUTCLASSIC

The dataon the technology and function

Travels X/Y/Z axesU/V axesMax. taper angle <°/height

Dimensions Max. workpiece dimensions Lenght x width x height (with bath)Max. workpiece weight Without bath (with bath)

Performances Maximal cutting rate with CCS Ø 0.33 mm wire ◆ Cylindrical cut Finishing quality Best roughness ◆ Ra

Best roughness with SF modul, finishing power module ◆ Ra Threading system AGIEJET Threadable height

Threading nozzle Diameter

Wire guide system Wire guides, Standard equipment Wire diameterWire guides, Extension kit Wire diameter

Combination wire guide systemToroid guide

Increased accuracy in tapered cut AGIECONIC PLUSWire drive Wire spool Up to 25 kg

Wire feed SemiautomaticWire disposal Chopper

Work area AccessibilityFrontal drop door

Clamping base Universal clamping frame for best utilisation of the workzone Clamping frameMachining in bath Bath

High power generator AGIE IPG-V integrated Average working currentWide range of tested technologies for the most common wire and workpiece materials Technologies ModulesFeed control Servocontrolled, fixed feedCorrection of the cylindrical residual error AWO (Advanced Wire Offset)Dynamic path optimisation and process adaptation in the radii DYNAMIC CORNER CONTROLReal time detection and correction of the wire bending WIRE BENDING CONTROLReal time detection of the workpiece cross section and automatic power optimisation VARIOCUT

Dielectric conditioning unit Integrated Charge volumeFilter Cartridges 4 canisters with 8 cartridge filters

Filtrate qualityDeionizing Deionizing bottle Charge volume

Water conductivity control AutomaticCooling Generator and control unit with air / water, and dielectric with water / water heat exchangerSystem System dimensions Lenght x width x height

Floor-to-clamping plane distanceWeight Net weight

Weight ready-to-run

◆ According to AGIE setting values■ Standard▲ Variant: not retrofittable● Option: at choice


21

2

CLASSIC V 2 CLASSIC V 3

1m2 3

Operation and data inputRemote control for manual axes movement X/Y/U/V/Z and ■ AGIEJOGGER with electronic handwheel and LCD displayset-up functions for wire drive, work tank and pickup cyclesOperator interface system ■ 15”-LCD-display, Keyboard and mouseControl unit integrated ■ AGIEVISION object oriented man-machine interfaceOperating system ■ Multitasking Windows XPOperating mode ■ MultiprocessorCPU’s ■ Pentium for CNC and operator interfaceServocontrolled axes ■ X/Y/Z/U/VSupplementary servocontrolled axis ▲ A axisCommand format ■ Absolute, incrementalSmallest programmable step ■ 0.0001 mm (0.000004 in)Max. path correction ■ 6 mm (0.236 in)Modules and functionsEasy preparation of machining programs ■ EASYWORKPickup cycles for automatic determination of workpiece position ■ AGIESETUP 2DPickup cycles for automatic determination of workpiece plane and position ● AGIESETUP 3DAutomatic technology selection based on machining objectives ■ TECCUTImport of job-specific data from CAD/CAM systems ■ CAMLINKPredefined machining strategies ■ AUTOSEQUENCEPredefined and user defined machining strategies ■ USERSEQUENCEQuickly insert rush orders without effort ■ PIECEINSERTDNC port with Xon/Xoff and LSV2 protocols ■ DNCHelp functions, explanations with text and graphics ■ HELP and online manualMachining simulation 2D and 3D view ■ GRAFICHECKDefinition and modification on board of 2D geom. Import/export of IGES and DXF files ● AGIEGEOMaximum safety through continuous data input ■ FORMALCHECK and data input ProtocolEasy preparation of job templates ■ WORKMODELAutomatic instructions and commands execution ■ EASYRUNAutomatic machining sequence definitionfor multiple workpieces clamping ■ LOTTORethreading on wire break/on "no- thread" detection restart after power failure ■ Rescue strategiesLanguages ■ English, CN, CZ, DE, DK, ES, FR, HU, IT, JP, NL, RU, US, SEStorage capacity ■ > 20 GB HD, 512 MB RAMInterfaces ■ 2 x RS232C, 1 x parallel, 1 LAN (Local Area Network), 1 USBData storage media ■ DVD-ROM for updates and

on line manual, 31/2”-floppy-disk, USBConnectionsLine power ■ 9.7 kWLine voltage ■ 3 x 400 VCompressed air ■ 6 bar, 5 m3/h (85 psi, 6.54 yd3/h)Cooling capacity required ■ 1.5-6 kW

350 x 250 x 256 mm (13.77x9.84x10 in) 500 x 350 x 426 mm (19.7x13.77x16.8 in)±70 mm (± 2.75 in) ±70 mm (± 2.75 in)30°/100 mm (30°/3.93 in) 30°/100 mm (30°/3.93 in)750 x 550 x 250 (190 mm) [29.5x21.6x9.8(7,48 in)] 1050x650x420 (420 mm) [41.3x25.6x16.5in(16.5in)]450 (200 kg) [992.08 lbs(440 lbs)] 800 kg (400 kg) [1763.70 lbs (880 lbs)]300 mm2/min (0.465 sq in/min) 300 mm2/min (0.465 sq in/min)■ up to 0.2 µm (8 µin) ■ up to 0.2 µm (8 µin)● < 0.1 µm (4 µin) ● < 0.1 µm (4 µin)up to 250 mm (9.84 in) up to 420 mm (16.5 in)■ 2 mm (0.07 in) ■ 2 mm (0.07 in) ● 1 mm (0.039 in) ● 1 mm (0.039 in)● 0.6 mm (0.0236 in) ● 0.6 mm (0.0236 in)■ 0.15-0.33 mm (0.0059-0.0129 in) ■ 0.15-0.33 mm (0.0059-0.0129 in)● 0.07-0.1 mm (0.0275-0.0039 in) ● 0.07-0.1 mm (0.0275-0.0039 in)cylindrical up to 2° cylindrical up to 2°2° up to 30° 2° up to 30°● ●

■ ■

■ ■

■ ■

front front / topmanual manual■ ■

■ up to 190 mm (7.48 in) ■ up to 420 mm (16.55 in)45 A 45 A■ ■

■ ■

■ ■

■ ■

■ ■

■ ■

750 l (199 us gal) 1000 l (264 us gal)■ ■

5 µm (197 µin) 5 µm (197 µin)■ 10 l (2.64 us gal) ■ 10 l (2.64 us gal)● 30 l (7.92 us gal) ● 30 l (7.92 us gal)1-25 µS/cm2 1-25 µS/cm2

■ ■

1640 x 2040 x 2220 mm (64.56x80.31x87.4 in) 1940 x 2300 x 2600 mm (76.37x90.55x87.4 in)1075 mm (42.32 in) 1075 mm (42.32 in)2680 kg (5908.39 lb) 3460 kg (7627.99 lb)ca. 3350 kg (7385 lb) ca. 4200 kg (9260 lb)


22

Electrical erosion, also known asEDM – Electric Discharge Machining,is a young technology. Over 50 yearsold. Just as young as Agie. A technol-ogy which has been decisively influ-enced and shaped by Agie in thistime. What is EDM? Using electricaldischarge machining, conductive ma-terials of any hardness can be ma-chined with an accuracy of down toone thousandth of a millimetre, prac-tically without mechanical influence.This makes EDM the key technologyfor the manufacture of demandingmoulds and blanking tools whichare employed for the mass pro-duction of parts made of plastic,metals and glass. Objectsfrom our everyday life: tooth-brushes, mobile phone, PETbottle, computers, cutlery, skiboots, ballpoint pens, automo-bile components, toys, im-plants, instruments – the listcan be continued at will andproves impressively that EDMis a dynamic technology withunlimited potential for thefuture.

PARTNER TO THE BEST

The addressfor over 50 years of ED machining


Advice. Agie is quite near to you withcompetent and experience sales engi-neers to advise you all around thetopic of ED machining. No questionsremain open.

Information. Agie is constantly updat-ing its web site www.agie.com, pub-lishes interesting customer applica-tions in the magazine “experience”and informs you about the latestproducts even after the sales withbrochures and flyers.

Care. Agie has specialist consultantsin action who realise practice-orient-ed application, automation, hardwareand software solutions and also facili-tate entry into ED machining.

Training. Agie prepares individual in-structions for every EDM system sothat productive EDM jobs can becommenced already shortly aftercommissioning.

Documentation. Agie supports theoperator effectively with practicallyorientated use and maintenance doc-umentation in printed and electronicform.

Help line. Agie solves approx. 90% ofall problems routinely directly on thephone.

Service. Agie ensures optimal func-tioning and utilisation of your AgieEDM system worldwide with its con-stantly trained service technicians.

Readiness for delivery. Agie offersduring workdays a 24-hour serviceand maintains a large store for fastdeliveries with 97 percent availability oforiginal spare and wearing parts, con-sumables and additional equipment.

Original parts. Agie guarantees thebest EDM results with its originalspare and wearing parts. All the ma-chining technologies and works spec-ifications are based on this. 23


AGIE SACH - 6616 LOSONETELEPHONE +41 (0)91 806 91 11TELEFAX +41 (0)91 806 92 [email protected]

All rights to changes reserved.

© AGIE. The machine design is registered, 1997.

500.029.628May 2006Printed in Switzerland.

AGIE CHARMILLES LTDNORTH VIEWUK-COVENTRY CV2 2SJUNITED KINGDOMTEL +44 2476 538 666FAX +44 2476 530 [email protected]

AGIE [email protected]

AGIE SALES LTDCH - 6616 LOSONETEL +41 (0)91 806 90 30FAX +41 (0)91 806 90 [email protected]

MIKRON AGIE CHARMILLES SALES LTDWWW.AGIE.COM

AGIE CHARMILLES [email protected]

AGIE CHARMILLES SPA BU [email protected]

AGIE CHARMILLES [email protected]

AGIE CHARMILLES SA [email protected]

AGIE LTD575 BOND STREETLINCOLNSHIREILLINOIS 60069 - USATEL +1 800 438 50 21FAX +1 847 478 57 [email protected]

ON THE WEB SITE:WWW.AGIE.COM

GREAT BRITAINNORTHERN IRELAND

GERMANY

SWITZERLANDAUSTRIABENELUXSCANDINAVIASLOVENIACENTRAL AND EASTERN EUROPEBALKANSMIDDLE EASTSOUTH AFRICA

CIS

POLAND

ITALY

FRANCE

SPAINPORTUGAL

USACANADASOUTH AMERICAMEXICO

JAPANSINGAPOREINDIAPAKISTANCHINAKOREA

EUROPE NORTH

EUROPE SOUTH

AMERICA

ASIA


agiecut classic-the success in ed wire cutting · agiecut vertex, the most successful ed...

Documents