advanced thermal performing curtain wall system · 2015. 5. 4. · ©2018 ykk ap america inc. is a...
TRANSCRIPT
-
YCW 750 XT IGAdvanced Thermal Performing Curtain Wall System
A High Performance Curtain Wall System for Inside Glazing
Product Options & Features
Engineered to meet and exceed the most stringent green building codes and standards, the YCW 750 XT IG is an inside glazed high performace curtain wall system utilizing MegaTherm® thermal struts for superior energy efficiency. When inside glazing is not permissable, optional horizontals are available for outside glazing. The insulating glass rests on integrated structural supports, diverting the dead load away from the thermal barriers ensuring long-term structural integrity.
nSuperior thermal performance using standard 1” insulating glassnIntegrates in building’s air-vapor barrier systemnOptional integral thermally broken sill flashing availablenDual finish option on the interior and exterior utilizing custom face coversnOptional SSG vertical member available
Values as low as 0.21*
Minimum 78 frame & 72glassCRF
U-Factor
*Based on AAMA 507. Lower values may be achieved through futher simulation.
https://www.ykkap.com/commercial/product/curtain-walls/ycw-750-xt-ig/https://www.ykkap.com/commercialhttps://www.ykkap.com/commercial/performance-product-lines/energfacade/https://www.ykkap.com/commercial/performance-product-lines/energfacade/
-
©2018 YKK AP America Inc. is a subsidiary of YKK Corporation of America.270 Riverside Pkwy, Suite 100, Austell, GA 30168 Tel: 678-838-6000
SYSTEM SPECIFICATIONS YCW 750 XT IG
04-5022-03
SystemSightline
Base Depth
Glazing& Config Glass
AirInfiltration
WaterInfiltration
AcousticalPerformance
2-1/2” 7-1/2”Inside
&Front Set
1” IGU with Low-E (C.O.G. U-factor: 0.29)
0.06 CFM/FT²(1.10 m³/h·m²)
@ 6.24 PSF (299 Pa)
Static: 15 PSF (718 Pa)Dynamic: 15 PSF (718 Pa)
Std STC: 31Std OITC: 25
Lam STC: 36Lam OITC: 29
Testing Standards ASTM E 283 ASTM E 331 & AAMA 501 ASTM E 90 & 1425
Optional Depths for Glazing 1” Glass - 6” to 9” 1-1/2” Glass - 6-1/2” to 9-1/2”1-3/4” Glass - 6-3/4” to 9-3/4” 2” Glass - 7” to 10”
Available Finishes Factory Anodized (AAMA 612) and Organic Paints (AAMA 2604 & AAMA 2605)
Additional information including CAD details, CSI specifications, Test Reports, Fenestration Product Rating Certificates and Installation instructions are available online at: www.ykkap.com/commercial/product/curtain-walls/ycw-750-xt-ig/
ZOOM MULLION VIEW
YCW 750 XT IG
2.6° 11.0° 19.4° 27.8° 36.2° 44.6° 53.0° 61.4° 69.8° F°
Temperature Scale
YCW 750 IG
Frame temperature comparison values based on0º exterior, and 70º interior air temperatures.
DUAL THERMAL BARRIER - Deep Polyamide Struts (6/6 with glass fibers on all three axes)
WARMER INTERIOR SURFACES - Greater occupant comfort and increased resistance to condensation, with CRFf values up to 82
INTEGRATED STRUCTURAL SUPPORT - Carry dead load of the insulating glass, diverting load away from polyamide struts
Thermal Performance
1” IGU with LowE BTU/hr·ft2·°F
C.O.G. U-factor 0.32 0.30 0.28 0.26 0.24 0.22
2-1/2" x 7-1/2" 0.40 0.38 0.36 0.35 0.33 0.31
C.O.G. U-factor 0.20 0.18 0.16 0.14 0.12 0.10
2-1/2" x 7-1/2" 0.30 0.27 0.26 0.24 0.22 0.21
Testing Standards NFRC 100
CRF
Frame Glass
78 72
Frame Glass
78 72
AAMA 1503
https://www.ykkap.com/commercial/product/curtain-walls/ycw-750-xt-ig/