ADSB Services

ADSB intends to provide following services through Strategic Partners.

Upgrade of Offshore Rigs.

Maintenance of Offshore Rig at Shipyard.

Repair, Maintenance, Refurbishment/Upgrade of Land Rigs.

Steel Structural Fabrication and erection works.

Rental of Drilling Equipment. Lifting Cap. Generators – overhaul & repairs. Pumps – reciprocating - For mud. Dampeners, Swivels, Strainers – Industrial –Y&T Types. Rotary Table, Draw works & Drives.

Rig Packages • Design & Manufacture. • Drilling & Work over rigs 650HP to 2500HP. • Rig recertification, upgrades and turnkey overhauls.

Drilling & Well Control Equipment. • BOP Control Units. • Design & Manufacture • Recertification and upgrades.

Drilling Equipment. • Recertification & Supply. • Mud pump, Draw works, and travelling equipment.

Engines. • Overhaul – Zero hour, Top end and Failure analysis/repair. • Dynamometer & resistive load testing.

Fabrication. • Skid & Trailer mounted packages. • Pump skids, Flare stacks, Mud systems, Cement units and Batch mixers. • Mast & Substructures.

Technical Manpower (On shore & off shore). • QA/QC. • Mechanical, Hydraulic, Electrical, Fabrication, Engineers & Technicians.

Details of Various Services currently offered by ADSB

Commercial Repairs and Conversions.

ADSB Services every year work on various Commercial Vessels in the region like offshore Supply Vessels, Anchor Handling Tug Boats, Diving Support Vessels, Offshore Fire Fighting

Vessels, Offshore DP Vessels, Landing Crafts, Tug Boats, Barges, Dredgers, Pilot Boats, Works Boats, Crew Boats etc. and carry out average 350 dry docking per year.

The scope of services is as follows:

• Dry Docking maintenance services • Blasting and Painting works • Jumboisation of Vessels • Conversion to Well Stimulating Vessels • Engine Overhauling • Electrical and Mechanical Works • AC and Ventilations upgrades • CPP system repairs • Bow Thruster Installations • Crane Installations • Wheelhouse modifications • Stern gear and Steering Gear repairs • Dry-docking for classification surveys Naval Repairs and Refits.

ADSB offer the services on various Naval ships like the Corvettes, Fast Patrol Boats, Mine Hunters, Missile Strike Boats, Amphibious Troops Carries, Naval Landing Crafts and Logistics Vessels, Fast Assault Boats, Interceptors and Coast Guard Vessels. • Midlife Refits, Major Refits and Navigational Refits • Installation and upgrading of advanced combat systems • Dry docking and routine maintenance services • Hull and deck replacements • Mechanical and Electrical Repairs • MTU Engine Overhauling •Propulsion system overhauls and re-engining • Combat system modifications, upgrades and integration • Accommodation Refurbishments • Replacement of obsolete equipment • Special Deck Coatings • Electrical system, motors, gensets repairs • Pumps Overhauling, Valves overhauling • Maintenance and overhauling of Hull Equipment. • EOMS / ESM Installations • Navigation and Communication Equipment upgrades • System Engineering.

Super Yachts Maintenance and Upgrades. ADSB subsidiary SAFWA MARINE has the primary focus on niche market of the Super Yachts Maintenance and Upgrades. also as new initiative. The services offered are as follows: • Dry docking and maintenance services • Yacht Specific Painting • Upgrades and Modifications • Accommodation Upgrades • Stern and Steering Gear Repairs

ADSB FACILITIES AT A GLANCE

FLOATING DOCK (Mina Zayed Facility) Lifting Capacity – 10,000 Tons Length = 180m Breadth (Inside) = 30m Max Docking Draught of Ship = 6.5mWet berth adjacent to floating dock: 250m length x 13 m draft. Additional wet berths if required can be arranged by ADSB.

SYNCHROLIFT (Mussafah Facility): Lifting Capacity – 2000 Tons Length = 80 m. Breadth = 19 m. Max. Draught of Ship = 4.5 m

DRY BERTH (Mussafah Facility): 80m long x 8 dry berths, Transfer system and 80m long x 2 covered dry berths Travellift for docking vessels upto 500 tons 20 dry berths for vessels less that 50m

WET BERTH (Mussafah Facility): 160m Lth X 1 - draft 6m 80m Lth X 2 - draft 5m 50m Lth X 1 - draft 5m 30m Lth X 4 - draft 3m

Product Division Organization: Steel fabrication, Machine shops, Electrical/ Electronics, Piping, Calibration, Aluminum fabrication, Fibre glass and composite moulding shops etc.

Manpower: Currently we have 800+ man power at the workshops which can be increased at any point of time subject to volume of new business. We have multicultural workforce including Europe and America of which majority are from Asia (Middle east, India, Pakistan, Far east etc).

ADSB FLOATING DOCK FACILITY AT MINA ZAYED, ABU DHABI

Length Overall: 180 M

Breadth Between Wing Walls (inside): 30 M

Maximum Vessel Draft: 6.5 M

Lifting Capacity: 10,000 Tons

Number of Cranes: 2 Cranes

Crane Capacity: 2 X 10 Tons

Total Length of wet berth: 250 M

Draft of wet berth: 13 M

GENERAL DESCRIPTIO N

Design and Engineering Services Repair and maintenance of mechanical machinery and equipment Structural repairs (Steel, Aluminum & Alloys) Repair and maintenance of electrical machinery and equipment Hull treatment and tank coating Repair and renewal of pipes (Steel, Aluminum, Exotic material & PVC) Heavy lift activities using cranes and forklifts Load testing and certification of lifting gears and safety equipment Diving and underwater inspections NDT Services

Following are some of the major activities undertaken by the shipyard: