adp scheme 778 (110489) (package- 1) gpi peshawar sardar...
TRANSCRIPT
69
ADP Scheme – 778 (110489) (Package- 1)GPI Peshawar Sardar Ghari
Electrical Technology DAE
S# Name of Items Specification
Unit For one
college
Qty
Unit Price
(Both in
Figures
and
words)
Inclusive
all taxes
Total Price
(both in
Figures
and
words)
Inclusive
all taxes
1 DC
Fundamental
trainer along
with module
and base unit to
perform
following
Practicals
• Measurement of Circuit Voltage, Current, Resistance • Measurement of DC Power Sources in Series and in Parallel Series • Connection of Opposing DC Sources, • Switches Identification and Switching Concepts, • Verification of Ohm’s Law: Circuit Resistance, Current, & Voltage • Mesuerment of Resistance, Voltage and Current in a Series Resistive Circuit • Measurement of Resistance, Voltage and Current in a Parallel Resistive Circuit • Measurement of Resistance, Voltage and Current in a Series-Parallel Resistive Circuit , • Measurement of Power in a Series and/or Parallel Resistive Circuit • Measurement of Rheostat and Potentiometer • Measurement in Voltage and/or Current Dividers • Measuring: DC Ammeter, DC Ohmmeter, DC Voltmeter • Measurement of Currents and Node Currents in a Two-Element Branch Circuit • Measurement of Voltages in a Three-Element Series Circuit • Verfication of Algebraic Sum of Voltages in a Series Circuit • Verfication of Generating Loop Equations and Node Equations • Verfication of Kirchoff’s Voltage and Current Laws with a Two-Source Circuit • Mesh Solutions, Superposition Solution and Millman's Theorem Solution of a Two-Source Circuit , • Verfication of Thevenizing a Single-Source Network and a Dual-Source Network , • Verfication of Thevenin Resistance (RTH) and Voltage (VTH) of a Bridge Circuit • Conduct Thevenin-to-Norton Conversion • Conduct Norton-to-Thevenin Conversion • Conduct Tee and Wye or Pi and Delta Networks • Conduct Transformation of Delta and Wye Networks • Conduct Troubleshooting Basics and DC Networks Input Voltage 220 V (AC), 50 HZ, Output DC Supply 0-220 V(DC) (With complete accessories and instruction manual and Student manual)
No 1
70
2 AC
Fundamentals
Trainer along
with module
and base unit to
perform
following topics
• Measuring AC Voltage, Current and Impedance AC Fundamentals Trainer along with module and base unit to perform following topics : • Measuring AC Voltage, Current and Impedance • Measuring and Setting Frequency • Measurement of Inductors, Phase Angle, Series vs Parallel, Inductive Reactance and Impedance • To Conduct Series and Parallel RL Circuits • To Conduct Electromagnets, Solenoid, Relay • To Conduct Transformer Windings, Mutual Inductance, Turns and Voltage Ratios, Secondary Loading • To Conduct Capacitors, Series vs Parallel, Capacitive Reactance • To Conduct Series and Parallel RC Circuits • To Conduct RC Time Constants • To Conduct RC/RL Wave shapes • To Conduct Series and Parallel RLC Circuits • To Conduct Series Resonant Circuits • To Conduct Q and Bandwidth of a Series/Parallel RLC Circuit • To Check Resonant Frequency in a Parallel RLC Circuit • Measuerment of Power Division and Power Factor • Conduct Filters: Low-Pass, High Pass, Band-Pass and Band-Stop Input Voltage 220 V (AC), 50 HZ Output Variable AC 0-220 V With complete accessories and instruction manual and student manual)
No 1
3 Solid state
Semiconductor
Trainer along
with module
and base unit to
perform
following
topics:
• Semiconductor Component Identification and Control of a Semiconductor Switch • Diode: DC Characteristics, Diode Waveshaping • Rectifiers: Half-Wave, Full-Wave Diode Bridge, Power Supply Filtering, Voltage Doubler • Zener Diode and Voltage Regulation • Transistor: Testing the Junctions, PNP Transistor Current Control Circuit, Emitter-Base Bias Potentials, Collector Current vs Base Bias, DC Circuit Voltages, Load Lines • Semiconductor Devices Circuit Board • Multistage Amplifier Introduction • Common Base, Common Elmitter and Common Collector Circuits AC/DC Operation • Temperature Effect on Fixed Bias Circuit and Voltage Divider Bias Circuit • Transistor Parameters Familiarization and Understanding the Specification Sheet • RC Coupled Amplifier DC Operation, AC Voltage Gain and Phase Relationship, Frequency Response • Transformer Coupled Amplifier AC/DC Operation, Frequency Response • Direct Coupled Amplifier AC/DC Operation , Frequency Response • Amplifier Circuits • Single-Ended Power Amplifiers: Introduction, DC Operation, AC Operation, Voltage Gain, Power Gain • Phase Splitter DC Operation • Voltage Gain and Input/Output Signal Phase Relationship • Push-Pull Power Amplifiers: DC Operation, AC
No 1
71
Operation, Voltage and Power Gain • Complementary Power Amplifiers: DC Operation, AC Operation, Voltage Gain and Power Gain • Darlington Pair Current Gain Characteristics, Input and Output Impedance • Oscillators Operation: Unijunction, Hartley, Colpitts • JFET: Operating Characteristics, Effect fo Gate Bias on Pinch-Off, Dynamic Characteristics, DC Amplifier Operation, Voltage Gain, DC Current Source Operation and Power/Load Voltage Variation • MOSFET: Zero Bias Characteristic, Modes of Operation, Voltage Amplifier, Dual Gate MOSFET Mixer • UJT: Operating Characteristics, Waveform Generation • Thermistor and Photoresistor Operation • Fiber Optic Light Transfer (With complete accessories and instruction manual)
4 Thyristors And
Power Control
Trainer along
with module
and base unit to
perform
following
topics:
• Thyristor: Component Familiarization, Circuit Fundamentals • Silicon Controlled Rectifier (SCR): Testing, DC Operation, Gate Trigger Voltage and Holding Current • Rectifiers: Half-Wave Rectifier, SCR Controlled Half-Wave Rectifier, Full-Wave Rectifier, Phase Control • UJT: Characteristics, Half and Fuill-Wave Phase Control • Bidirectional Conduction, Triggering Modes (4) With complete accessories and instruction manual)
No 1
5 Digital Logic
Fundamentals
Trainer along
with module
and base unit to
perform
following topics
:
• Component Location and Identification • Operation of General Circuits and IC Package Fundamentals • Logic Functions:AND, NAND, OR, NOR, Exclusive OR, NOR Gates • Dynamic Response of XOR/XNOR Logic Gates • DC Operation of a NOT and an OR-TIE • Transfer Characteristics of a Schmitt and a Standard LS TTL Gate • Flip-Flops: Set/Reset, D-Type, Statik JK, Dynamic Operation • Tri-State Gate: Output Enable Control, Sink and Source Control • TTL and CMOS: Static Trigger Levels, Dynamic Transfer Characteristics • Static and Dynamic Control of a Data Bus • Component Location and Identification • Operation of General Circuits and IC Package Fundamentals • Basic Counter Control Functions, Ripple Counter Waveforms, Synchronous Counter Circuit Waveforms and Glue Logic • Basic Operating Modes of the Shift Register • Shift Register Circuit Waveforms • Fundamental Binary Addition, Addition with Input and Output Carry • Fundamental Binary Comparisons • Comparators and Counter Modulus Control
No 1
72
• Circuits • Component Location and Identification • Operation of General Circuits and IC Package Fundamentals • Fundamentals: BCD Decoder Operation, Priority Encoder Operation, ADC Operation, DAC Operation • Data Selector, Multiplexer, 1-Line-to-8-Line Demultiplexer • 1-Line-to-8-Line Demultiplexer • LED Decoder/Driver, 7-Segment LED Display, ODD and EVEN Parity • ODD and EVEN Parity • Parity Generator/Checker Glue Logic • Circuits and Digital Circuits With complete accessories and instruction manual)
6 Analog
Communicatio
n Trainer.
The trainer having the practical provision hardware wise on the following topics of the course • Analog Communication Concepts and Circuit Board Familiarization • Amplitude Modulation, RF Power Amplifier, Balanced Modulator, RF Stage • Mixer, IF Filter, Envelope Detector, Balanced Modulator, LSB Filter, RF Power Amplifier, Mixer, RF Stage • Mixer and RF Power Amplifier • RF Stage, Mixer, and IF Filter • Product Detector and Automatic Gain Control • Frequency and Phase Modulation • Demodulation (Quadrature Detector) • PLL Circuit and Operation, FM Detection with a PLL Have the Troubleshooting provision in the basics & analog communication circuits. ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
7 Sensor and
Transducer
Trainer
Covering
following
topics:
Introduction to Transducers and the Circuit Board • Temperature Measurement, Control, RTD, Thermocouple • Capacitance Sensor, Touch and Position Sensing • Strain Gauge Characteristics • Bending Beam Load Cell (Strain Gauge) • Ultrasonic Principles, Distance Measurement • Infrared Transmission/Reception, IR Remote Control • Force Measurement • Computerized Temperature Control and Measurement • Control Panels • Plunger Switches • Magnetic Proximity Sensors • Shock/Vibration Sensors • Electronic Active Sensors • Electronic Passive Sensors With complete accessories and instruction manual and Student manual)
No 1
8 Magnetism
And
Electromagneti
sm Trainer
along with base
unit and
• Magnetism, Magnetic Fields, Making a Magnet • Electromagnet, Solenoid, Relay (With complete accessories and instruction manual and Student manual)
No 1
73
Module to
cover the
following
topics:
9 Digital
Communicatio
ns Trainer
Complete with
Covering
following topics
:
• Concepts of Digital Communications, Circuit Board Familiarization • PAM Signal Generation, Demodulation, PAM TDM Transmission and Reception • PTM Signal Demodulation and Generation • PCM Signal Generation and Demodulation, Signal Time-Division Multiplexing • DM Transmitter, Receiver and Noise • Channel Bandwidth and Noise With complete accessories and instruction manual and Student manual)
No 1
10 DC Machines
Trainer: (200
watts or Above)
• DC Series motor • DC Shunt motor • DC Compound motor • DC Separately excited motor • DC Series Generator • DC Shunt generator • DC Compound generator • DC Separately excited generator • Techo meter (Optical) • PRONY brake • EDDY Current brake • Brake control unit for above item with torque and speed display capability • Resistive, capacitive, and inductive loads • Motor/generator control unit to operate above machines • Complete measuring instruments and related accessories • DC volt, ampere, watt,and meters Input Supply Voltage 220 V(AC) frequency 50 HZ, 200 W or above 220 V (DC) with Max: speed 1500 RPM, with variable field facility With complete accessories and instruction manual)
No 1
11 AC Machines
Trainers:
(200watts or
above)
• Single phase induction motor • Single phase capacitor start motor • Single phase capacitor run motor • Single phase shaded pole motor (30watt or above) • Single phase repulsion motor • Universal motor • 3 phase motors. Ø Squirrel cage Ø Phase wound Ø Double speed • 3 phase synchronous machine • TECHO meter (Optical) • Resistive, capacitive, and inductive loads • Motor/generator control unit to Operate above machines • Complete measuring instruments and related accessories • AC volt, ampere, Active power, reactive power, inductive power, power factor, frequency, meters • Variable frequency drive control unit Input Supply voltage 220/380 V, 50Hz 200 W or Above Max: Speed 1400 RPM or above with variable
No 2
74
suypply voltage 0-380 V (3-phase) with 0-220 V(Variable) Excitation DC voltage (With complete accessories and instruction manual and Student manual)
12 Digital logic
trainer
Breadboard
based
• Input Logic switches • Output LED’s • Power supplies • Seven segment displays • TTL and CMOS provision • Clock Signals • Connecting wires • Breadboard size: 2400 tie points or above ( Along with all standard accessories mention in the brochure and instructional manual and Student manual and Student manual)
No 10
13 Analog Trainer
Breadboard
Based
• Breadboard size: 2400 tie points or above • Function generator (sine , square, Triangle, and Ramp • Fixed and variable power supplies ±0~25V, ±12V, +5V ( Along with all standard accessories mention in the brochure and instructional manual and Student manual)
No 3
75
14 PLC Trainer DC output: Voltage: 0 – 24V Current: 0 – 2A Ac Output: Voltage: 220V Current: 1 Amp Input/output terminals is 32 or above Memory: 32K or above Internal memory: 2K Timer/counter: 128/64 Base Module: Din Rail Power supply module: input:120/230 V (AC) Output: 24 V DC/5 A PC interface: USB or Ethernet With software supported (LAD, FBD, and STL). Accessories: Connection cords, PC cable, ac power cord, Program CD, Manual. PLC Application Modules: • Traffic Lights • Electro-Pneumatics • Electro-Mechanical – DC Motor • Electro-Mechanical – Stepper Motor • Level Process Control
No 2
15 Fire Alarm
Training
Systems:
• Wiring and Schematics • Component Location and Wiring • EOLR • Remote Zone Indicators • Pull Stations/Connections • Control Panels • Horn Strobes • Junction Boxes • Layout Diagrams (With complete accessories and instruction manual and Student manual)
No 1
16 Refrigerator
and Air
Conditioner
Trainer:
Base unit for the refrigeration training system Condensing unit, consisting of hermetic compressor, condenser, receiver, pressure switches and shut-off valves Insulated refrigeration chamber with integrated evaporator, electric defrost heater and condensate drip tray Refrigeration chamber, condensing unit and power supply equipped with shock-proof lab jacks Refrigerant R134a, CFC-free Air-cooled condensing unit Evaporator with fan 220V 1 phase, 50Hz, 1 condensing unit 1 refrigeration chamber 1 set of instructional material Air Conditioner Trainer Air Conditioning System Trainer contains three types of liquid control devices, a capillary tube, Thermostatic expansion valve, and hand expansion valve. A reversing valve is included so that the system may be run as a heat pump. all of the system’s fittings have been brazed. The trainer includes sight glasses and pressure gauges at the inlet and outlet of the evaporator and condenser, thermometer wells, temperature and pressure controls,
No 1
76
Receiver, filter dryer, and accumulator. It is factory charged withR-410A refrigerant. Furnished complete with operating instructions, experiment and teacher manuals. The components are mounted to a panel and completely piped and wired. All components are clearly identified by legends. The panel is mounted to a mobile cart with four (4) casters, two with brakes.
17 Analog Dual
Trace
Oscilloscope, 40
MHz:
The module should include CH 1, CH 2, CHOP, and ALT display modes, an operating instruction manual, one line cord, and two low-capacitance probes. (With complete accessories and instruction manual)
No 3
18 Laboratory
Instruments
demonstration
type:
Specification The Laboratory Instruments module should consist of the following devices. • DC meter • Sine/square wave generator • Electronic volt-ohm-millimeter (VOM) • AC/DC power supply (With complete accessories and instruction manual)
No 2
19 Digital
Function
Generator
Specification 20MHz, Sine, Square, Ramp, Noise waveform Amplitude, DC Offset and other key setting information shown on the 5~8 digit display (With all accessories mention in the brochure and instructional manual)
No 2
20 Digital storage
oscilloscope
Specification 100 MHz Bandwidth with 2 Input Channels with color display. (With all accessories mention in the brochure and instructional manual)
No 2
21 Digital
Multimeter
with dual
measurement
displays (Bench
Type)
Specification DC Voltage :100 mV ~ 1000V DC Current: 100μA ~ 10A Resistance : 100Ω ~ 100 MΩ AC Voltage: 100mV ~ 750V AC Current: 100mA ~ 10A Power Source: 230 V (With all accessories mention in the brochure and instructional manual and Student manual)
No 2
77
22 Digital Clamp
on meter
Specificatin AC Amp: 200A AC Vtg: 600V DC Vtg: 600V Ohms: 20MΩ (With complete accessories and instruction manual and Student manual)
No 5
23 Digital
Multimeter
(Hand Held):
Specification DC Voltage : 1000 V DC Current: 10A Resistance : 20 MΩ AC Voltage: 600 V AC Current: 10 A (With complete accessories and instruction manual and Student manual)
No 5
24 Digital LCR
Meter bench
type
Specification Resistance : 0.00001Ω ~ 99999kΩ Capacitance: 0.00001pF ~ 99999uF Inductance : 0.00001mH ~ 99999H Quality Factor : 0.0001 ~ 9999 Impedance : 0.00001Ω ~ 99999kΩ (With all accessories mention in the brochure and instructional manual and Student manual)
No 2
25 Multiple
output Dual
range DC
power supply:
Specification 0 ~ 30V x 2, 0~5amp x 2 (With complete accessories and instruction manual and Student manual)
No 2
26 Single and 3-
phase
Transformer
Trainer:
Specification Ø Input single phase: 220/220 V, 50 Hz Ø Input 3 phase: 380/380 V each single phase transformer of 500 VA along with measuring meters (for current, voltage, power) Ø Output single phase: 80%, 90%, 100%, and 110% Ø Output 3 phase: 80%, 90%, 100%, and 110%. • Distribution Transformer • Single-Phase Transformers Supplying Single-Phase Loads • Single-Phase Paralleling • 3-Phase Paralleling • Efficiency calculation of each transformer • Open/no load test • Load/Short circuit • Polarity test • Three-Phase Banking of Single-Phase Transformers with complete accessories and instruction manuals.
No 1
27 Motor Winding
Kit:
Specification • Equipment Familiarization • Split-Phase Capacitor-Start Motor • Three-Phase Squirrel Cage Induction Motor • DC compound motor • Motor Winding machine with counter • Coil winding range up-to 8 inch • All motors should be without winding (With complete accessories and instruction manual and Student manual)
No 1
78
28 Electric Iron
Trainer
220 V, 1000 W
or above
Input Voltage: 220 V (AC) Frequency: 50 HZ
No 5
29 Pedestal Fan
Trainer
24’’ Standard
Type 100 W
Input Voltage: 220 V (AC) Frequency: 50 HZ
No 5
30 Ceiling Fan
Trainer
56’’ Standard
Type 100 W
Input Voltage: 220 V (AC) Frequency: 50 HZ
No 5
31 Kitchen
Grinder
Trainer
80 W-100 W
standard type
Input Voltage: 220 V (AC) Frequency: 50 HZ
No 5
32 Juicer blender
Trainer
80 w-100 w
Input Voltage: 220 V (AC) Frequency: 50 HZ
No 3
33 Water Heater
Trainer
2 KW or above
Input Voltage: 220 V (AC) Frequency: 50 HZ
No 5
34 Kitchen
Microwave
Oven Trainer
600 W- 1000
W
Input Voltage: 220 V (AC) Frequency: 50 HZ
No 3
35 Electricians
Tool belt Tool
Kit 13Pcs:
( One kit for
each student)
Electricians Tool belt Tool Kit 13Pcs:(One kit for each student) 5m/16" ST tape measure, 125-250V AC mains tester, junior hacksaw, pocket level 210mm, electricians knife, 160mm combicutter, 170mm snipe nose pliers and 185mm combination pliers; 5 x screwdrivers (PZD 2 x 100mm, SLP 2.5 x 75mm, SLP 5.5 x 125mm, SLP 6.5 x 150mm). (With complete accessories and instruction manual and Student manual)
set 15
79
ADP Scheme – 778 (Package – 1) Electronics DAE (1. GPI Peshawar)
S# Name of Items Specification Unit For one
college
Qty
Unit
Price
(Both in
Figures
and
words)
Inclusive
all taxes
Total
Price
(both in
Figures
and
words)
Inclusive
all taxes
1 DC Fundamentals
Trainer along with
base unit .The trainer
having the practical
provision hardware
wise on the following
topics
• Circuit Voltage, Current, Resistance • DC Power Sources in Series and in Parallel Series • Opposing DC Sources • Switches Identification and Switching Concepts • Ohm’s Law: Circuit Resistance, Current, & Voltage • Resistance, Voltage and Current in a Series Resistive Circuit • Resistance, Voltage and Current in a Parallel Resistive Circuit • Resistance, Voltage and Current in a Series-Parallel Resistive Circuit • Power in a Series and/or Parallel Resistive Circuit • Rheostat and Potentiometer • Voltage and/or Current Dividers • Measuring: DC Ammeter, DC Ohmmeter, DC Voltmeter • Currents and Node Currents in a Two-Element Branch Circuit • Voltages in a Three-Element Series Circuit • Algebraic Sum of Voltages in a Series Circuit • Generating Loop Equations and Node Equations • Kirchoff’s Voltage and Current Laws with a Two-Source Circuit • Mesh Solutions, Superposition Solution and Millman's Theorem Solution of a Two-Source Circuit • Thevenizing a Single-Source Network and a Dual-Source Network • Thevenin Resistance (RTH) and Voltage (VTH) of a Bridge Circuit, • Thevenin-to-Norton Conversion • Norton-to-Thevenin Conversion • Tee and Wye or Pi and Delta Networks • Transformation of Delta and Wye Networks • Magnetism, Magnetic Fields, Making a Magnet • Electromagnet, Solenoid, Relay Have the Troubleshooting provision ( Along with all standard accessories mention in the brochure, instructional
No 1
80
manual and Student manual)
2 AC Fundamentals
Trainer along with
base unit .The trainer
having the practical
provision hardware
wise on the following
topics of the course.
• Measuring AC Voltage, Current and Impedance • Measuring and Setting Frequency • Inductors, Phase Angle, Series vs Parallel, Inductive Reactance and Impedance • Series and Parallel RL Circuits • Electromagnets, Solenoid, Relay • Transformer Windings, Mutual Inductance, Turns and Voltage Ratios, Secondary Loading • Capacitors, Series vs. Parallel, Capacitive Reactance • Series and Parallel RC Circuits • RC Time Constants • RC/RL Wave shapes Troubleshooting the Basics AC Fundamental Circuits. • Series and Parallel RLC Circuits • Series Resonant Circuits • Q and Bandwidth of a Series/Parallel RLC Circuit • Resonant Frequency in a Parallel RLC Circuit • Power Division and Power Factor • Filters: Low-Pass, High Pass, Band-Pass and Band-Stop Have the Troubleshooting provision in the Modules
No 1
81
( Along with all standard accessories mention in the brochure and instructional manual and Student manual)
3 Solid state Devices
(BJT, FET) Trainer
along with base unit.
The trainer having the
practical provision
hardware wise on the
following topics of the
course
• Semiconductor Component Identification and Control of a Semiconductor Switch • Diode: DC Characteristics, Diode Wave shaping • Rectifiers: Half-Wave, Full-Wave Diode Bridge, Power Supply Filtering, Voltage Doubler • Zener Diode and Voltage Regulation • Transistor: Testing the Junctions, PNP Transistor Current Control Circuit, Emitter-Base Bias Potentials, Collector Current vs Base Bias, DC Circuit Voltages, Load Lines • Multistage Amplifier Introduction • Common Base, Common Emitter and Common Collector Circuits AC/DC Operation • Temperature Effect on Fixed Bias Circuit and Voltage Divider Bias Circuit • Transistor Parameters Familiarization and Understanding the Specification Sheet • RC Coupled Amplifier DC Operation, AC Voltage Gain and Phase Relationship, Frequency Response • Transformer Coupled Amplifier AC/DC Operation, Frequency Response • Direct Coupled Amplifier AC/DC Operation , Frequency Response, • Single-Ended Power Amplifiers: Introduction, DC Operation, AC Operation, Voltage Gain, Power Gain • Phase Splitter DC Operation • Voltage Gain and Input/output Signal Phase Relationship • Push-Pull Power Amplifiers: DC Operation, AC Operation, Voltage and Power Gain • Complementary Power Amplifiers: DC
No 1
82
Operation, AC Operation, Voltage Gain and Power Gain • Darlington Pair Current Gain Characteristics, Input and Output Impedance, • Oscillators Operation: Unijunction, Hartley, Colpitts, JFET: Operating Characteristics, Effect fo Gate Bias on Pinch-Off, Dynamic Characteristics, DC Amplifier Operation, Voltage Gain, DC Current Source Operation and Power/Load Voltage Variation • MOSFET: Zero Bias Characteristic, Modes of Operation, Voltage Amplifier, Dual Gate MOSFET Mixer • UJT: Operating Characteristics, Waveform Generation • Thermistor and Photo resistor Operation • Fiber Optic Light Transfer Have the Troubleshooting provision in soial modules. ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
4 Thyristorsand Power
Control Trainer along
with base unit.The
trainer havingthe
practical provision
hardware wise on the
following topics of the
course
Thyristor: Component Familiarization, Circuit Fundamentals • Silicon Controlled Rectifier (SCR): Testing, DC Operation, Gate Trigger Voltage and Holding Current • Rectifiers: Half-Wave Rectifier, SCR Controlled Half-Wave Rectifier, Full-Wave Rectifier, Phase Control • UJT: Characteristics, Half and Fuill-Wave Phase Control • Bidirectional Conduction, Triggering Modes (4) Have the Troubleshooting provision in the above modules. ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
83
5 Operational Amplifier
Trainer along with
base unit. The trainer
having the practical
provision hardware
wise on the following
topics of the course.
Op Amp Types and Packages, Circuit Board Familiarization, Basic Op Amp Characteristics and Parameters • Inverting and Non-Inverting Amplifiers Operation: DC and AC • Voltage Follower DC Operation, AC Operation • Typical Amplifiers Operation: Inverting Gain-of-One Amplifier, Inverting Summing Amplifier, Scaling, Averaging, Non-Inverting Summing, Difference Amplifier (AC/DC) • Open-Loop Operation, Zener-Clamped Operation • Sine Wave to Square Wave Converter • Component Location and Identification • Band Pass Filter Operation • Integrator and Differentiator • Low Pass and High Pass Filter Frequency Response, Phase and Transient Response • Band Pass Filter Operator, Frequency Response, Phase Response • DC Characteristics of an Active Voltage to Current Converter • AC Characteristics of an Active RMS or Average Calibrated Voltage to Current Converter Have the Troubleshooting provision in the above module. ( Along with all standard accessories mention in the brochure , instructional module and Student manual)
No 1
6 Digital Logic Trainer
Along with base
unit.The trainer
havingthe practical
provision hardware
wise on the following
topics of the course.
Component Location and Identification • Operation of General Circuits and IC Package Fundamentals • Logic Functions:AND, NAND, OR, NOR, Exclusive OR, NOR Gates • Dynamic Response of XOR/XNOR Logic Gates • DC Operation of a NOT and an OR-TIE • Transfer Characteristics of a Schmitt and a Standard LS TTL Gate • Flip-Flops: Set/Reset, D-Type, Statik JK, Dynamic Operation • Tri-State Gate: Output Enable Control, Sink and Source Control • TTL and CMOS: Static Trigger Levels, Dynamic Transfer Characteristics • Static and Dynamic Control of a Data Bus • Component Location and Identification • Operation of General Circuits and IC Package Fundamentals • Basic Counter Control Functions, Ripple Counter Waveforms, Synchronous Counter Circuit Waveforms and Glue Logic • Basic Operating Modes of the Shift Register • Shift Register Circuit Waveforms • Fundamental Binary Addition, Addition with Input and Output Carry
No 1
84
• Fundamental Binary Comparisons • Comparators and Counter Modulus Control • Component Location and Identification • Operation of General Circuits and IC Package Fundamentals • Fundamentals: BCD Decoder Operation, Priority Encoder Operation, ADC Operation, DAC Operation • Data Selector, Multiplexer, 1-Line-to-8-Line Demultiplexer • 1-Line-to-8-Line Demultiplexer • LED Decoder/Driver, 7-Segment LED Display, ODD and EVEN Parity • ODD and EVEN Parity • Parity Generator/Checker Glue Logic Have the Troubleshooting provision in the digital circuits ( Along with all standard accessories mention in the brochure, instructional manual and Student manual)
7 16-Bit Microprocessor
Trainer.The trainer
having the practical
provision hardware
wise on the following
topics of the course.
• Read and Write Cycles • CPU Initialization • Memory Control Signals, Address Decoding, Data Transfers • Ports: DAC and ADC Ports, PPI and Keypad Interface, Display and Serial Ports • Non-maskable and Maskable Interrupts, Exceptions • Immediate, Register and Memory Addressing Modes • Instruction Formats and Using the 8086 CPU Instructions • DC Motor Control and Temperature Control application Have the Troubleshooting provision for the above modules ( Along with all standard accessories mention in the brochure, instructional manual and Student manual)
No 1
8 Analog
Communication
Trainer. The trainer
having the practical
provision hardware
wise on the following
topics of the course
• Analog Communication Concepts and Circuit Board Familiarization • Amplitude Modulation, RF Power Amplifier, Balanced Modulator, RF Stage • Mixer, IF Filter, Envelope Detector, Balanced Modulator, LSB Filter, RF Power Amplifier, Mixer, RF Stage • Mixer and RF Power Amplifier • RF Stage, Mixer, and IF Filter • Product Detector and Automatic Gain Control • Frequency and Phase Modulation • Demodulation (Quadrature Detector) • PLL Circuit and Operation, FM Detection with a PLL Have the Troubleshooting provision in the basics & analog communication circuits. ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
85
9 Transducer and Sensor
Trainer. The trainer
having the practical
provision hardware
wise on the following
topics of the course.
Introduction to Transducers and the Circuit Board • Temperature Measurement, Control, RTD, Thermocouple • Capacitance Sensor, Touch and Position Sensing • Strain Gauge Characteristics • Bending Beam Load Cell (Strain Gauge) • Ultrasonic Principles, Distance Measurement • Infrared Transmission/Reception, IR Remote Control • Force Measurement • Computerized Temperature Control and Measurement • Control Panels • Plunger Switches • Magnetic Proximity Sensors • Shock/Vibration Sensors • Electronic Active Sensors • Electronic Passive Sensors • Have the provision of the troubleshooting ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
10 Digital
Communications
Trainer.The trainer
having the practical
provision hardware
wise on the following
topics of the course.
• Concepts of Digital Communications, Circuit Board Familiarization • PAM Signal Generation, Demodulation, PAM TDM Transmission and Reception • PTM Signal Demodulation and Generation • PCM Signal Generation and Demodulation, Signal Time-Division Multiplexing • DM Transmitter, Receiver and Noise • Channel Bandwidth and Noise • Circuit Board Familiarization and Introduction to Digital Transmission • Encoding and Decoding • FSK Signal Generation, Asynchronous Detection, Synchronous Detection • PSK Signal Generation and Synchronous Detection • ASK Signal Generation and Asynchronous Detection • Effects of Noise on ASK and PSK Signals • Effects of Noise on Asynchronously and Synchronously Detected FSK Signals • Operation of an FSK Modem and DPSK Modem Have the provision of the trouble shooting in the digital communication circuits ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
11 Motors, Generators,
And Controls Trainer
Along with base
unit.The trainer
having the practical
• DC Motor Circuits Familiarization • Stepper Motor and AC Motor Circuits • Analog DC Motor Positioning, PWM DC Motor Positioning • Analog and Pulsed Speed Control of a
No 1
86
provision hardware
wise on the following
topics of the course.
DC Motor • Variable Frequency Control Motor 24V and above • The Tachometer Generator Have the provision of the troubleshooting ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
12 Microcontroller
System (MCS-51 and
PIC-16F) Trainer
Along with base
unit.The trainer
havingthe practical
provisionhardware
wise on the following
topics of the course
• Inputs and Outputs, Digital vs. Analog, Clocking • Programming, Display a Message, Calculations, Input Conditioning, Decisions and Macros • The 7-Segment Display • String Variables and ASCII Code • LCD Display • How to Program the Microcontroller • Control two LED’s through controller • Control four 7 segments display through controller • Message display on LED through controller • Sequencer traffic light controller • Have the provision of the troubleshooting ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
13 Digital logic trainer
Breadboard base
having the following
facilities.
• Input Logic switches • Output LED’s • Power supplies • Seven segment displays • TTL and CMOS provision • Clock Signals • Connecting wires • Breadboard size: 2400 tie points or above • Have the troubleshooting provision. ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 5
14 Analog Trainer
Breadboard base
having the following
facilities.
• Breadboard size: 2400 tie points or above • Function generator (sine , square, Triangle, and Ramp • Fixed and variable power supplies ±0~25V, ±12V, +5V • Have the troubleshooting provision. ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 2
15 Chopper/Inverter
System Trainer.The
trainer having the
practical provision
hardware wise on the
following topics of the
course
• Single phase full converter with • RL load. • Three-phase full converter RL load. • Step-Down (Buck) DC to DC Converters. • Step-up (Boost) DC to DC Converters. • Step-Down/up (Buck-Boost) DC to DC Converters CCM. • Step-Down/up(Buck-Boost) DC to DC Converters DCM • Forward DC – DC converter • Full bridge DC – DC converter
No 1
87
• Three-Phase Half-Wave semi -converter • Single-Phase Full-converter • Single-Phase Bridge’s Rectifier • Single-Phase semi & Full-converter with Resistive & Inductive load • Three-Phase semi-converter and Full-wave converter with Resistive and Inductive load • DC to DC converters • Have the provision of the troubleshooting ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
16 Thyristor Speed
Controller Trainer.The
trainer havingthe
practical provision
hardware wise on the
following topics of the
course
The Thyristor Speed Controller, Model is designed to control the speed of the DC motor/ generator module, in both the open-loop and closed-loop modes of control. The Thyristor Speed Controller module contains a thyristor single-phase bridge rectifier. Speed control of the DC motor 24V and above is provided by varying the firing angle of the thyristors. In the open-loop mode of control, the firing angle is set manually using a potentiometer while in the closed-loop mode; it is set by a controller which compares the motor armature voltage to a voltage reference set by the user. • Have the provision of the troubleshooting ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
17 PLC Trainer having
the following facilities.
DC output: Voltage: 0 – 24V Current: 0 – 2A Ac Output: Voltage: 220V Current: 1 Amp Input/output terminals is 32 or above Memory: 32K or above Internal memory: 2K Timer/counter: 128/64 Base Module: Din Rail Powersupply module: input:120/230 V (AC) Output: 24 V DC/5 A PC interface: USB or Ethernet With software supported (LAD, FBD, and STL). Accessories: Connection cords, PC cable, ac power cord, Program CD, Manual. PLC Application Modules: • Traffic Lights • Electro-Pneumatics • Electro-Mechanical – DC Motor • Electro-Mechanical – Stepper Motor • Level Process Control • Have the provision of the troubleshooting ( Along with all standard accessories mention in the brochure , instructional manual and Student manual)
No 1
88
18 Digital storage
oscilloscope
100 MHz Bandwidth with 2Input Channels with color display. (With all accessories mention in the brochure and instructional manual)
No 5
19 Spectrum Analyzer Frequency Range: 150kHz ~1GHz (With all accessories mention in the brochure and instructional manual)
No 2
20 RF signal generator Frequency Range: up to 150 MHz (With all accessories mention in the brochure and instructional manual)
No 3
21 Digital Function
Generator
20MHz, Sine, Square, Ramp, Noise wave form Amplitude, DC Offset and other key setting information shown on the 5~8 digit display (With all accessories mention in the brochure and instructional manual)
No 4
22 FM/AM standard
signal generator
Frequency Range: 100kHz ~ 110MHz (With all accessories mention in the brochure and instructional manual)
No 3
23 Switching DC
Regulated power
supply
Three independent, isolated output CH3 adjustable output : 5V/3A 0-30V x 2, 0-3A x 2 * 2 Independent Isolated Output * Four "3 Digits" LED Displays * 0.01% Load and Line Regulation * Low Ripple and Noise * Tracking Operation and Auto Series/Parallel Operation * Output ON/OFF Switch Over Load and Reverse Polarity Protection (With all accessories mention in the brochure and instructional manual)
No 3
24 Digital Multimeter
with dual
measurement displays
(Bench Type)
DC Voltage :100 mV ~1000V DC Current: 100μA ~ 10A Resistance : 100Ω ~100 MΩ AC Voltage: 100mV ~750V AC Current: 100mA ~ 10A Power Source: 230 V (With all accessories mention in the brochure and instructional manual)
No 7
25 Digital Clamp on
Meter
AC Amp: 0~200A AC Vtg: 600V DC Vtg: 600V Ohms: 20MΩ (With all accessories mention in the brochure and instructional manual)
No 5
26 Digital Multimeter
(Hand Held)
DC Voltage : 1000 V DC Current: 10A Resistance : 20 MΩ AC Voltage: 600 V AC Current: 10 A (With all accessories mention in the brochure and instructional manual)
No 7
89
27 Digital LCR Meter
bench type
Resistance : 0.00001Ω ~ 99999kΩ Capacitance: 0.00001pF ~ 99999uF Inductance : 0.00001mH ~ 99999H Quality Factor : 0.0001 ~ 9999 Impedance : 0.00001Ω ~ 99999kΩ (With all accessories mention in the brochure and instructional manual)
No 3
28 Digital Frequency
Counter
10HZ-120 MHZ Range 8 Digit Display Frequency and Period measurement Along with complete Accessories. (With all accessories mention in the brochure and instructional manual)
No 2
29 Logic Probe and
Pulser
For In circuit testing of TTL and CMOS (With all accessories mention in the brochure and instructional manual)
No 10
30 Digital IC Tester Test
Range :TTL 74/54
CMOS 40/45 Test voltage 2.5-5v Display 16 characters or more in 1 line LCD Power Source AC 100-240 v,50Hz (With all accessories mention in the brochure and instructional manual)
No 5
31 AC Power Source Input 220v AC Variable Output 0 to 300v AC (With all accessories mention in the brochure and instructional manual)
No 3