adh international - · pdf fileadh international orporation is a houston based oilfield...
TRANSCRIPT
ADH INTERNATIONALCORPORATION is a Houston based oilfield equipment Pro-curement and Supply Company specializing in Upstream & Downstream products . Our equipment is made by leading manufacturers in the US, Canada and Europe, and is certified for use in all end user regions. Meanwhile, direct cooperation with local OEM and aftermarket equipment manufacturers allows us to reduce prices for our
customers by an additional 10-25% compared to the market.
Throughout our 20 years in business, we have accrued significant experience in buying, sell-ing, and servicing various types of oil and gas equipment. ADH Internationalcan deliver a full range of equipment and services required for the uninterrupted operation of drilling rigs & refineries.
Our company’s aim and focus has been helping our customers SAVE SIGNIFICANT STAND-BY COSTS while driving down operating expenses.
You can depend on us for quick procurement (24-48 hours), logistic services, and quality products at reasonable prices (including technical inspection, assistance in start-up and commission-ing). Intercontact's additional services include audit, accounting, banking and customs support, and representation of customer interests including legal support during negotiations with equipment manufacturers.
INTERCONTACT'S STAFF IS EXPERIENCED IN THE FOLLOWING AREAS:
Complete fabrication of Mud, Fuel and Water Systems
"Rebuild" services, US OEM and aftermarket parts on drilling rig components including draw-works, block swivels, mud pumps, solid control and other major rig components
BOP, BOP rams, wellheads, spools, mud line, manifolds, valves with WP 3000 - 20000 PSI
Mud pumps and engine-generator packages 400-2400 HP, made in USA
Mud cleaning systems, waste heat utilization boilers, solid control and close-loop systems
Steam generators, water cleaning, waste water treatment systems, desalination and oil heater systems
Spare parts for all drilling rigs and components, made in the USA and Canada
Diesel generators, spare parts for Wartsila Engines, Detroit Diesel, Caterpillar, Cummings Engines and transmissions
Drill pipes, casing, kellies, pup joints, crossovers, hanger assembly, fittings, flanges made in USA
Various tools, instrumentation and expendables including drilling bits, filters, all kind of valves, gauges, flow meters, couplings, adapters, blocks, liners, pistons, oil seals, etc.
Parts and components for off-shore rigs, centrifugal pumps, cranes, BOP's, top drives, valves, mud and vibrator hoses, pipe handling and fishing tools, general supply.
Various oilfield fluids
An extensive database, experience, market knowledge of our experts, long established business re-
lations and direct cooperation with equipment manufacturers, and low prices allow us to minimize
costs and optimize commercial terms while guaranteeing the highest quality.
OUR ADVANTAGES
PEOPLE
Intercontact’s personnel are ALL HIGHLY QUALIFIED, TRAINED, and EXPERIENCED in the ener-gy industry, each individual having a high level of training, strong background in souring and supplying oilfield equipment and services.
PRODUCTS & SERVICES
Individual approach to every client and project. Extensive database and unique search engine. Quick response (24-48 hours) on most requests, urgent deliveries. Optimal selection of equip-ment, evaluation and assistance in the project development for each specific application. Comprehensive commercial proposals and technical documentation and certification. Instal-lation and commissioning services of supplied equipment.
ADH Internationalprovides “original” OEM as well as first quality “aftermarket” equipment and parts of major leading world and local manufacturers from small items to the large drill-ing rig.
DELIVERY
ALL products sold are completely inspected and inventoried in our warehouse prior to ship-ment to insure that “what the customer ordered” is “what is shipped”. We provide full logisti-cal support, packing and freight services either from manufacturer plant or from our ware-house in Houston, USA.
ADH Internationaldelivers all products and services “as promised”. Every possible effort is made to meet delivery schedules. We recognize the importance of timely and accurate deliv-ery.
PRICING
Price is of the utmost concern and we provide competitive prices from thoroughly selected companies. Because of the long term relationships, “volume buying”, “expertise in souring materials” and excellent credit and track record with the manufacturers and vendors we rep-resent, ADH Internationalis able to deliver products and services and provide our customers with larger discounts. We are pleased to share these savings with our customers.
SINGLE SOURCE PURCHASING ADH Internationalis qualified to locate and deliver any item, spare part, rig component, ex-pendable products, and other equipment utilized in the energy/oil industry.
SINGLE SOURCE PURCHASING is a convenient, economical, and smart, thus, allow us to pro-vide our customers “One Stop” shopping, less overhead, lower pricing, single source responsi-
Please see below list of low cost services provided worldwide by our sister/partner company — GLOBAL OFFSHORE ENGINEERING
Company has 4 principal activities, below is list including sub/off-shore activities:
A.) Project management: Project Organization, Monitoring and Engineering support
1. Organization and planning of project phases and time scheduling
2. Organization and planning of project work scope
3. Planning and preparation WBS (work brake down sheet which include all required tech specification for shipyard and third party contractors to perform project work)
4. Preparation of technical specifications for procurement department to purchase of equipment/material
5. Organization of re-certification of the unit and equipment
6. Organization of NDT inspection as per project requirement
7. Organization of steel replacement and related work to steel replacement
8. Organize QA/QC controls and inspection
9. Organization of Material verification for project need
10. Daily inspections of performed work
11. Organization of daily meetings with shipyard and contractors
12. Change/update project drawings and documentation
13. Preparation of documentation packages as per class requirements
14. Commissioning and acceptance of equipment and unit
B.) Design and Engineering services
1. Structural Design, drawings and calculations including FEM analyses
2. Mechanical equipment design, drawings and calculations
3. Piping systems design, drawings and calculations
4. Electrical designs and calculations
5. Hydraulic systems design drawings and calculations
6. Drilling equipment design, drawings and calculation
7. Pipeline repair tools and equipment design and drawings
8. Safety and Environmental design and drawings
C.) Audits and Surveys
1. Drilling unit full condition surveys
2. Drilling unit pre-SPS survey
3. Drilling unit acceptance survey
4. Drilling unit efficiency operation survey
D.) Equipment Fabrication
1. Fabrication of drilling equipment as per customer request
2. Fabrication of pipeline repair tolls and equipment
3. Fabrication of hydraulic systems and equipment
4. Fabrication of various control systems
5. Fabrication of spare parts as per customer request
6. Fabrication of aux. tools and equipment required to perform repairs and upgrading’s
ABB
Aker Maritime /
Aker Solutions/
MHWirth
American Block
Manufacturing
Co.
Axon Energy
Products
Atlas Copco
American
Manufacturing
American
Clutch
Bosch Rexroth
Corp.
Bronco Manu-
facturing
BVM Corpora-
tion USA
Control Flow
Inc.
Continental
Steel & Tube
Co.
Crane Carrier
Company
Crosby
Cummins
Cameron/
Letourneau/
Demco/Lewco
Caterpillar
Cavins Oil Well
Tools
Drilling
Structures
International
Drilling Tools
International
Danco
Den-Con Tools
Depco Power
Systems
Double Life
Dresser-Rand
Emerson
Forum Energy
Technologies
(Access Oil Tools
Blohm+Voss,
Davis Lunch
FMC
Corporation /
WECO
FARR Canada /
McCoy
Manufactures names or trademarks used in this catalog are trademarks of their respective companies and are not part of ADH InternationalCorporation
Gardner Denver
Gates Rubber
Gearench
GE Oil & Gas
(Ajax Compres-
sor/Hydril)
Hacker Indus-
tries
Hartel Pumps
Ingersoll Rand
Kemper Valve
King Oil Tools /
Gefco
Loadcarft /
Cooper Manu-
facturing
Logan Oil Tools
(Kline Oil Tools)
Mattco
Manufacturing
Midwest Hose &
Specialty, Inc.
Mud King Prod-
ucts
MTU/Detroit
Diesel
National Oilwell
Varco
Norris
Odessa Pumps
O’Drill / MCM
Oil States /
Smatco/Regal
OTECO
Parker
Petroflex
Petro-Valve, Inc
Proficient Oil
Tools Ltd.
Petron / Pason
Offshore
Quincy
Compressors
Rockwell
Automation
Manufactures names or trademarks used in this catalog are trademarks of their respective companies and are not part of ADH InternationalCorporation
Ray Oil Tool
Reamco Inc.
Schlumberger
(MI Swaco/
Smith Interna-
tional/ Drillco)
Southwest Oil
Field Products,
Inc.
Seatrax Marine
Cranes / Semco
Stewart &
Stevenson
Superior Drill
Pipe
Supreme
Manufacturing
SKF
Teledyne
TIW Corporation
Tsubaki
TSC
Manufacturing
& Supply
Tri-Flo
International
Toro Downhole
Tools
Timken
Vallourec &
Mannesmann
Vam Drilling
Varel
International
Wartsila
Wagner
Instruments
Weatherford
International
(Grant Oil Tools/
Oil Country)
West Coast BOP
Products
Wika Instrument
Manufactures names or trademarks used in this catalog are trademarks of their respective companies and are not part of ADH InternationalCorporation
AMNGR
Russia/Vietnam
GazPromNeft
Russia
Caspian Drilling
Company
Azerbaijan
GazFlot
Russia
Poland National
Oil Company
Poland
Dart Energy
Kuwait
AGIP Norway
Aladdin Middle
East
Turkey
Deutag
Germany
Vietsovpetro
Vietnam
SOCAR
Azerbaijan
Lukoil
Russia
McDermott
USA
Cliff's Drilling
USA
Azov Petroleum
Ukraine
BK “Eurasia”
Russia
Terexco
Singapore
Perez Company
Argentina
Bolifor S.A.
Bolivia
Servicios Corod
Venezuela
Pt. Bormindo
Indonesia
Peerless Drive
Ltd.
India
Urdaneta/
GazProm
Venezuela
Blend Oil Field
Services
Egypt
Future Plans
ADH International Corporation’s objective is to provide cost-effective, high-quality drill-
ing equipment and services to our customers. We aim to understand and meet our
customer’s specific needs by applying our long-term industry experience, broad net-
work of manufacturers and unique discounts to ensure optimal solutions for our cus-
tomers. Our focus is on timely, cost-efficient and logistically optimal delivery.
Company Aim and Focus
ADH INTERNATIONAL CORPORATION
To Call: +1 832 633 5517 Telephone
Address: 2727 Allen Parkway,
Houston, TX 77389
@ To Email: [email protected]
Via Internet: www.AdhEnergy.com
OUR CONTACT INFORMATION
ADH International’s experienced staff, excellent reputation, market knowledge, long established business relation-ships, and low cost structure, truly distinguish the company in the industry and position it well for future success.
We plan to conduct extensive market research to under-stand the needs of the oil and gas operators and continue expand our network of high quality and cost efficient man-ufacturers. We continuously research and broaden the range of equipment and services above and beyond the scope of contracts, in order to meet the needs of our cus-tomers in the ever-changing environment that oil and gas industry has been known for.