addendum 3 hs commons & music building … hs/addendum 3... · moriarty-edgewood school...

HS Commons & Music Building 5244.01

Moriarty-Edgewood School District

ADDENDUM NO. 3 AD3-1 August 31, 2015

The addendum is hereby made part of the Contract Documents to the same extent as though it were originally

included therein. Refer to "Bid Form" for acknowledgment of addenda.

All Contractors, Subcontractors and suppliers are reminded that they shall be familiar with all addenda items

(as well as all parts of the construction documents) so as to understand the extent of their work and its

interrelation with other trades.

To all bidders for furnishing all labor and materials necessary for the following contract:

ADDENDUM 3

HS COMMONS & MUSIC BUILDING ADDITIONS AND RENOVATIONS

MORIARTY-EDGEWOOD SCHOOL DISTRICT

MORIARTY, NEW MEXICO

STRUCTURAL ITEMS

DRAWINGS:

ITEM AD3-S1

Sheet S101 - Foundation Plan

In the Kitchen area, provide a depressed slab for trench drain item 29 per section E/FS105. See FS102 for location.

ITEM AD3-S2

Sheet S103 - Low Roof Framing Plan

1. At Existing beam to new W14x26 beam, cut detail C6/S501.

2. At HSS 6x6x1/4 header on south side of plan, cut section D2/S302.

3. At two new entry ways on Grid D, cut section D3/S301.

ITEM AD3-S3

Sheet S105 - Roof Framing Plan

New Openings on the top of the plans are in existing CMU walls, see Typical detail E4 on S701 for new lintels.

ITEM AD3-S4

Sheet S301 - Sections

1. On section A3, provide 6” metal stud walls on either side of the CMU wall. The 6” metal studs on the right

side of the wall are 18ga structural studs at 16”oc.

2. On sections A4, B5, and D5, add note “Grout all cells solid”.

3. On section D5, change 3 5/8”- 16ga studs to 6”- 18ga studs at 16”oc.

4. Add Section D3 per attached sheet SK01.

ITEM AD3-S5

Sheet S302 - Sections

Add Section D2 per attached sheet SK02.

ITEM AD3-S6

Sheet S501 - Details

Add Detail C6, per attached sheet SK03.

ITEM AD3-S7

Sheet S701

1. On section E5, change 6” in title to 4”.

2. Revise Section E4 per attached sheet SK04.




ITEM AD3-S8

Sheet S702 - Typical Details

Add Typical Soffit Wall Support Detail per attached sheet SK05.

ARCHITECTURAL ITEMS

PROJECT MANUAL:

ITEM AD3-A1

PRIOR APPROVALS

The following manufacturers / products have been approved in the sections indicated, provided their product

satisfies all requirements of the specifications and contract drawings.

Section Manufacturer / Products

07 21 00 - Thermal Insulation

2.01.B Polyiso Versico MP-H

07 54 23 - Fully Adhered TPO Membrane Roofing Versico VersiFleece

ITEM AD3-A2

Section 04 20 01 - Masonry Veneer

Paragraph 2.02.A, refer to section 04 22 00 for mortar and grout specification.

ITEM AD3-A3

Section 07 21 00 - Thermal Insulation

Paragraph 2.01.B.7, note the polyiso insulation board is for use in a roofing application. The materials provided by

the manufacturers listed must meet the requirements listed above and as required by the roofing system manufacturer

for a class A roofing assembly.

ITEM AD3-A4

Section 08 14 16 - Flush Wood Doors

Add section 205.B to read:

B. Metal Louvers: L-700-BF by National Guard Products, Inc.

1. Material & Finish: 20 ga. cold rolled steel; powder coat finish.

2. Louver Blade: Inverted V blade, hemmer edges, sight-proof.

3. Louver Free Area: 55%.

4. Frame: Mitered and welded reinforced corners, counter-sunk mounting screws, sandwich frame for finish

appearance inside and out.

ITEM AD3-A5

Section 09 30 00 - Tiling

1. Paragraph 2.02.A, provide inside and outside corners and connectors.

2. Add line 2.02.A.1.e to read: "Between the mosaic floor tile and the 12 x 24 wall tiles."

DRAWINGS:

ITEM AD3-A6

Sheet G001 – Cover Sheet

Base Bid and Alternates, for alternate #1, base will be resilient cove if LVT option is taken. Refer to 01 2300.

ITEM AD3-A7

Sheet G002 – Code Review-Existing

1. Note current applicable Mechanical and Plumbing codes adopted by the State of NM are the 2012 New

Mexico Plumbing and Mechanical Code which adopts the 2012 Uniform Mechanical Code & 2012




Uniform Plumbing Code.

2. Under Music Building 2009 IBC Chapter 8, add the following:

801.2 refers to chapter 7. 710.1 occupant load increase is >20%, plumbing fixture count will be brought to

current IBC requirements, refer to sheet G004.

Existing occupant load (Music Building) = 194

Renovation and addition occupant load

(Music Building) = 298

35% increase

ITEM AD3-A8

Sheet G004 – Code Review

Add the following under General Notes: Code Review:

B. 2009 IEBC 710.1 occupant load increase at HS Buildings is <20%, no additional fixtures required.

Existing occupant load (HS Buildings 1 & 2) = 2,364

Renovation and addition occupant load

(HS Buildings 1&2, Commons Renovation,

Food Service Addition) = 2,440

4% increase

ITEM AD3-A9

Sheet A103 – Music Roof Plan

Sheet A131 - Roof Plan

1. Add a Roof Plan General Note #21 to read: "Refer to Structural for framing at roof penetrations."

2. Keyed note 10 71 13.43, the specification section for the fixed sunscreen is found under 10 70 00 Exterior

Sun Control Devices in the project manual.

ITEM AD3-A#

Sheet A111 – Partition Types

Add partition types 31S and 61V. Refer to detail ADD3-D3 attached to this addendum.

ITEM AD3-A10

Sheet A121 – Reflected Ceiling Plan

Add a lower section of gyp board soffit and fascia at the NE corner of the Serving K-1. Refer to detail ADD3-D1.1

attached to this addendum.

ITEM AD3-A11

Sheet A301 – Building Sections

1. Revise wall section A5. Refer to detail ADD3-D1.2 attached to this addendum.

2. Building section D1, delete the reference to wall section A3/A312. This wall section is correctly located

and identified in building section E1/A301.

ITEM AD3-A12

Sheet A312 – Wall Sections

Sheet A315 - Wall Sections

Keyed note 10 71 13.43, the specification section for the fixed sunscreen is found under 10 70 00 Exterior Sun

Control Devices in the project manual.

ITEM AD3-A13

Sheet A314 – Wall Sections

Sections A1, A3 & A5, the cross-hatched walls identified by keyed note 04 20 00 are existing building CMU walls

to remain. Revise the keyed note to read "02 00 00.01", add keyed note 02 00 00.01 to the keyed note legend to read

"Existing construction to remain unless noted elsewhere."

ITEM AD3-A14




Sheet A401 – Enlarged Plans and Interior Elevations

Rooms Boys xB-5, Girls xB-6, Girls MU-5C and Boys MU-5E all have unlabeled rooms or areas leading out of the

toilet rooms. These are vestibules directly associated with the toilet rooms, and shall be considered one and the same

as their respective rooms. Each vestibule shall receive the same finish as specified for the toilet rooms. This is

stated in the comments column of the finish schedule on sheet I102.

ITEM AD3-A15

Sheet A503 – Details-Roofing

Detail D5, refer to structural for size and design of the concrete slab lid over the door inset area.

ITEM AD3-A16

Sheet A504 – Details-Doors & Windows

Detail E5, add 1/2" fire treated plywood over existing CMU under new single-ply membrane.

ITEM AD3-A17

Sheet A507 – Details-Doors & Windows

Details B5 & C5, paint STL L 2x2x1/4 all around glass block, inside and out.

ITEM AD3-A18

Sheet A508 – Misc. Details

Detail A1, revise expansion joint type to indicate "A".

ITEM AD3-A19

Sheet A601 – Door Schedule

1. Door xMU-4A, revise door elevation to indicate "D".

2. Add door type D. Refer to detail ADD3-D2 attached to this addendum.

ITEM AD3-A20

Sheet A602 – Window Schedule

Window type F1, revise overall frame width to indicate 1'-4" in lieu of 1'-5 1/2". Adjust glazing width accordingly.

ITEM AD3-A21

Sheet I102 – Room Finish Schedule

1. Rooms C-1Upper Commons, C-2 Lower Commons, G-07 Corridor and K-1 Serving, revise the Floor Base

to indicate PS - Porcelain Stone Tile. Wall base will be 4" x 24" single bullnose trim tile over all the

porcelain stone floors.

2. Room K-1 Serving, in the comments column, add "Paint exposed structural framing, joists, etc."

KITCHEN ITEMS

ITEM AD3-FS1

PRIOR APPROVALS

The following manufacturers / products have been approved in the sections indicated, provided their product

satisfies all requirements of the specifications and contract drawings.

Section Manufacturer / Products

11 40 00 - Food Service Equipment

Item 14 - Walk-in, Cooler/Freezer American Panel / Custom

Tafco / Custom

Item 15 - Coil, Cooler American Panel/Russell / AA28-122

Tafco Witt / SA28-134B-AE

Item 16 - Refrigeration System, Cooler American Panel/Russell / RLH151M44

Tafco Witt / GLH151M44E




Item 17 - Coil, Freezer American Panel/Russell / AE36-120

Tafco Witt / SE36-120B-DE

Item 18 - Refrigeration System, Freezer American Panel/Russell / RLH315L44

Tafco Witt / GLH315L44E

Item 24 - Hood, Exhaust Accurex / XXDW

Item 69 - Hood, Exhaust, Condensate Accurex / XD1

DRAWINGS:

ITEM AD3-FS2

Note in the plan set submitted to PSFA for pre-permit review, the kitchen drawing sheets (11 sheets) have been

sealed and signed by the architect.

ITEM AD3-FS3

Sheet FS103 – Food Service Electrical Rough-in

Add junction boxes for electrical rough-in at each remote refrigeration system. Refer to detail SKFS-001 attached to

this addendum.

MECHANICAL AND PLUMBING ITEMS

ITEM AD3-MP1

PRIOR APPROVALS

Prior approvals listed in this addendum are only an acknowledgement that the listed manufacturers below

manufacture equipment similar to what is specified. It will be the responsibility of the manufacturer and

manufacturer’s representatives to meet or exceed the equipment specifications during the submittal process.

Grease Master Make-Up Air Unit

Watts Drainage

Armstrong Pumps

Paco Pumps

PROJECT MANUAL:

ITEM AD3-MP2

Section 23 30 00 - Air Distribution

Add fabric duct write-up, see attached SKM-3

DRAWINGS:

ITEM AD3-MP3

Sheet P-401 - Enlarged Kitchen Soil & Vent Piping Plan

Add floor sink for ice machine, see attached SKP-1

ITEM AD3-MP4

Sheet P-402 - Enlarged Kitchen HW, CW & Gas Piping Plan

Add CW drop for ice machine, see attached SKP-2

ITEM AD3-MP5

Sheet M-102 - Music Building HVAC Plan

Add exhaust fan, thermostat, door grille and related ductwork in storage MU-4A, see attached SKM-2

ITEM AD3-MP6

Sheet M-401 - Enlarged Kitchen HVAC Plan

Change duct layout to miss skylight. See attached SKM-1




ELECTRICAL ITEMS

DRAWINGS:

ITEM AD3-E1

PRIOR APPROVALS

Note: prior approvals listed in this addendum are only an acknowledgement that the listed manufacturers below

manufacture equipment similar to what is specified. It will be the responsibility of the manufacturer and

manufacturer’s representatives to meet or exceed the equipment specifications during the submittal process.

Refer to prior approval reviews attached to this addendum.

ITEM AD3-E2

Sheet E-001 - Electrical Symbols, Legend and General Notes

Changed symbol for GFCI outlet, see attached SKE-8.

ITEM AD3-E3

Sheet ED-102 - Music Building Demolition Plan

Add note to remove existing data equipment and reinstall after demolition, see attached SKE-6.

ITEM AD3-E4

Sheet E-102 - Music Building New Lighting Plan

Add lights in utility room xMU-5, see attached SKE-9.

ITEM AD3-E5

Sheet E-202 - Music New Power and Special Systems Plan

Add note to reinstall existing data equipment in same location. Provide 120v power to exhaust fan CEF-2, run 2#12

and 1#12 ground in .75” conduit, and provide 20A/1P breaker for exhaust fan. See attached SKE-7.

ITEM AD3-E6

Sheet E-401 - Enlarged Kitchen Electrical Plan

Add general receptacles, see attached revised drawing sheet.

ITEM AD3-E7

Sheet E-702 - Electrical Schedules

Changed light fixture information, see attached SKE-5.

END OF ADDENDUM NO. 3

Attached to this addendum are 34 sheets, some are 8 ½” x 11” sheets and some are 11” x 17” sheets. The 11”

x 17” sheets are marked as such. One sheet is an 11" X 17" version of a full-sized drawing sheet, and is

marked as such.

EXTERIOR SIDE

1 1

2 2

B

B

A

A

A5

A301

8' - 0"

11' - 8"

8' - 0"

8' - 0"

SERVING

K-1

KITCHEN

K-2

OFFICE

K-3

DATE:JOB NO.

SHEET:

C:\

Use

rs\c

van

dyc

k\D

ocu

men

ts\M

ES

D_C

om

mo

ns-

Mu

sic

CD

_cva

nd

yck.

rvt

8/28

/201

5 11

: 01:

58 A

M

5244.01 08/31/15

HIGH SCHOOL COMMONS & MUSIC BLDG - ADDITIONS

AND RENOVATIONS

MORIARTY-EDGEWOOD SCHOOL DISTRICT ADD3-D1.1

1/4" = 1'-0"1

PARTIAL RCP - COMMONS

A

09 00 00.SB

09 21 16.GB5809 21 16.MS6

09 21 16.GB5807 21 00.BT6

09 51 00.AT24

05 31 00

07 21 00.PISO

09 21 16.GB58

04 20 01.MV

07 00 00.AS

07 21 00.RB2

07 27 2609 21 16.GS1205 40 00.SS6

09 21 16.GB5807 21 00.BT6

05 31 00

07 21 00.PISO

07 54 00

07 54 00.C

A507

A1Sim

A507

E3Sim

NEW DUCTWORK

(WHERE OCCURS)

09 21 16.GB58

09 21 16.MS3

8' - 0"

11' - 8"

09 21 16.SO

09 21 16.SO

09 21 16.MS3

05 10 00.BE

05 10 00.BF

OFFICE

K-3

SERVING

K-1

SH

EET T

I TLE

DRAW

ING

SH

EET

PRO

JECT N

O:

DRAW

N B

Y:

CH

EC

KED

BY:

TH

IS D

RAW

ING

IS IN

CO

MPLETE A

ND

NO

T

TO

BE U

SED

FO

R C

ON

STRU

CTIO

N U

NLESS

IT IS

STAM

PED

, SIG

NED

, AN

D D

ATED

BELO

W

DATE:

C:\Users\cvandyck\Documents\MESD_Commons-Music CD_cvandyck.rvt 8/28/2015 11:38:12 AM

5244.0

1

DU

CTW

ORK L

OC

ATIO

N

HIGH SCHOOL COMMONS & MUSIC BLDG - ADDITIONS AND

RENOVATIONS

08/3

1/1

5

AD

D3-D

1.2 MORIARTY-EDGEWOOD SCHOOL DISTRICT

1/2" = 1'-0"A5

WALL SECTION

KEYNOTE LEGEND04 20 01.MV MASONRY VENEER

05 10 00.BE STEEL BEAM - REFER TO STRUCTURAL

05 10 00.BF BRACE FRAME - REFER TO STRUCTURAL

05 31 00 STEEL DECKING

05 40 00.SS6 6" STEEL STUDS, 16" OC MINIMUM - REFER TO

STRUCTURAL

07 00 00.AS AIR SPACE

07 21 00.BT6 BLANKET INSULATION, 6" R-19 MINIMUM

07 21 00.PISO POLYISO INSULATION 5" (R-30 MIN)

07 21 00.RB2 RIGID BOARD INSULATION, 2"

07 27 26 FLUID APPLIED WEATHER BARRIER

07 54 00 THERMOPLASTIC MEMBRANE ROOFING

07 54 00.C CRICKET

09 00 00.SB SCHEDULED BASE

09 21 16.GB58 GYPSUM BOARD 5/8", STANDARD

09 21 16.GS12 EXTERIOR GRADE GYPSUM SHEATHING, 1/2"

09 21 16.MS3 3-5/8" METAL STUDS, 16" OC MAXIMUM

09 21 16.MS6 6" METAL STUDS, 16" OC MAXIMUM

09 21 16.SO GYPSUM BOARD SOFFIT- REFER TO REFLECTED

CEILING PLAN

09 51 00.AT24 ACOUSTICAL TILE CEILING, 2X4 - REFER TO

ROOM FINISH LEGEND FOR TILE DESIGNATION

D

HEIG

HT

WIDTH

1' -

0"

EQ.EQ.

DATE:JOB NO.

SHEET:

C:\

Use

rs\c

van

dyc

k\D

ocu

men

ts\M

ES

D_C

om

mo

ns-

Mu

sic

CD

_cva

nd

yck.

rvt

8/28

/201

5 11

:39:

14 A

M

5244.01 08/31/15


AND RENOVATIONS

MORIARTY-EDGEWOOD SCHOOL DISTRICT ADD3-D2

1/4" = 1'-0"B1

DOOR TYPES

14" x 14" METAL LOUVER,

REFER TO SPECIFICATIONS.

61V

09 00 00.SB

09 21 16.HI58

09 21 16.MS6

09 21 16.MS3.1

09 21 16.GB58

(4'-0" AFF)

09 21 16.GB58

31S

11'- 8"

DATE:JOB NO.

SHEET:

C:\

Use

rs\c

van

dyc

k\D

ocu

men

ts\M

ES

D_C

om

mo

ns-

Mu

sic

CD

_cva

nd

yck.

rvt

8/28

/201

5 11

:43:

43 A

M

5244.01 08/31/15


AND RENOVATIONS

MORIARTY-EDGEWOOD SCHOOL DISTRICT ADD3-D3

1/4" = 1'-0"D1

PARTITION TYPES

ROOF DECK

FINISH FLOOR

T

1 1

3 3

2 2

B

B

A

A

KEF-2

RTU-2

14"ø

18"x18"

14"ø16"ø

14"ø

1

2

12"ø

16"ø

8"ø

18"x18"

320 GOLD AVE SW STE 500, ALBUQUERQUE, NM 87102 PH-505-877-4499 WEB SITE - WWW.VERTTERRE.COM

HIGH SCHOOLCOMMONS & MUSICBLDG - ADDITIONSAND RENOVATIONSADDENDUM 3200 CENTER ST., MORIARTY, NM 87035

PROJECT NO:DRAWN BY:CHECKED BY:DATE:

100055.0004

08/25/15

REFERENCE SHEET:

SKM-1M-401

S. SWANP. MCMAHON

1/4" = 1'-0"1 ENLARGED KITCHEN HVAC PLAN ADDENDUM 3

ORIGINAL SHEET IS 11" x 17"

2148

4 4

A

A

FS

S

4"ø




100055.0004

08/28/15

REFERENCE SHEET:

1/4" = 1'-0"1 ENLARGED KITCHEN SOIL & VENT PIPING PLAN ADDENDUM 3

SKP-1

S. SWANP. MCMAHON

P-401


2148

4 4

A

A

5 5

DROP 1/2" CWLINE DOWN INWALL TO ICEMACHINE




100055.0004

08/28/15

REFERENCE SHEET:

SKP-2

S. SWANP. MCMAHON

P-402

1/4" = 1'-0"1 ENLARGED KITCHEN HW, CW & GAS PIPING PLAN ADDENDUM 3


T

STOxMU-4A

UTILITYxMU-5

STOMU-5A

CORRIDORMU-5

10"x10"

CEF-2

STUB 10"X10" DUCT THRUWALL ABOVE CEILING

PROVIDE LINE VOLTAGETHERMOSTAT RANGE50 DEG F TO 90 DEG F

P

14"X14" DOOR GRILLESEE ARCHITECTURALDOOR SCHEDULE




100055.0004

08/28/15

REFERENCE SHEET:

SKM-2

S. SWANP. MCMAHON

1/4" = 1'-0"1 MUSIC BUILDING HVAC PLAN ADDENDUM 3M-102





100055.0004

08/28/15

REFERENCE SHEET:

SKM-3

S. SWANP. MCMAHON

M-601

DUCTSOX HOOPS WITH VERONAExtent of non-metal ductwork is indicated on drawings and by requirements of the section.

SubmittalsProduct data: Submit manufacturer’s specifications on material and manufactured productsused for work of this sectionBuilding Code Data: Submit UL file number under which product is Classified by Underwriter’sLaboratories for both NFPA 90-A and UL 2518Provide detailed drawings confirming configuration of Textile Dispersion System (diameter,lengths, airflow, pressure, and textile permeability).Provide detailed installation instructions for components to be installed.Provide warranty maintenance documentation.Manufacturer must provide a 10 Year Product Warranty for products supplied for the fabricportion of this system as well as a Design and Performance Warranty.

DuctSox CorporationHoops (HIS) System: Air diffusers shall be constructed with internal retention system.System shall consist of an internal 360 degree hoop system, spaced 5’ on center.System shall be installed with a one row suspension system located 1.5” above top-dead-centerof the textile system.System attachment to cable or U-Track shall be made using Gliders spaced 12 inches.VeronaTextile Construction: Filament/filament twill polyester, fire retardant in accordance with UL2518.Air Permeability: 2 (+2/-1) CFM/ft² per ASTM D737, FrazierWeight: 6.8 oz. /yd² per ASTM D3776Warranty: 10 years

Textile Color: Green or Custom Color Verify with Owner Prior to ordering

Textile System Fabrication Requirements:Textile system to be constructed in modular lengths (zippered) with proper radial securing clipsalong the length of the system.Integrated air dispersion shall be specified and approved by manufacturer. (Select only thosethat apply)Orifices – 2” & 3” SG’s (Sewn-in Grommets)Air dispersion and extended throws are accomplished by reinforced orifices and permeablefabric. Reinforced orifices are to be installed to keep the integrity of opening and withstandlaundry process.Diameter, quantity, and location of reinforced orifices to be specified and approved bymanufacturer.


ORIGINAL SHEET IS 30" x 42". THIS SHEET IS AN 11" x 17" VERSION FORATTACHEMENT TO THE ADDENDUM. THE FULL-SIZE ORIGINAL IS AVAILABLEON THE GREER STAFFORD/SJCF ARCHITECTURE WEBSITE:

Link: http://ftp.greer-stafford.com/Contractors/Public/5244.01-FTP-Moriarty%20HS/Username: gs1717Password: 8812File Name: E-401 ADDENDUM 3.pdf




100055.0004

08/28/15

REFERENCE SHEET:

LIGHT FIXTURE SCHEDULETYPE VOLT DESCRIPTION MODEL LAMP QTY LAMP MOUNTING NOTES

A 120 SUSPENDED FIXTURE VOIGTLIGHTING#AMM-546-LED-4"-2'-4500L-X-OP-SO-6"-DB-120

N/A 125W LED SUSPENDED BOTTOM OF FIXTURE TO BE 13'-0" AFF

AA 120 EXTERIOR WALL LIGHT LITHONIA #WST LED-2-104700/40K-SR3-120 N/A LED WALL MOUNTED COORDINATE WITH ARCHITECT FOR FINISHAAE 120 EXTERIOR WALL LIGHT WITH

EMERGENCY BATTERY PACKLITHONIA #WST LED-2-104700/40K-SR3-120-ELCW N/A LED WALL MOUNTED COORDINATE WITH ARCHITECT FOR FINISH

B 120 SUSPENDED FIXTURE FOCIAL POINT #FSDL-22-CX-2000L-35-120-L11-CXX N/A 32W LED SUSPENDED 15'-0" AFF CUSTOM COLOR COORDINATE WITHARCHITECT

BE 120 SUSPENDED FIXTURE WITH EMERGENCYBATTERY PACK

FOCIAL POINT #FSDL-22-CX-2000L-35-120-L11-CXX-EM N/A 32W LED SUSPENDED 15'-0" AFF CUSTOM COLOR COORDINATE WITHARCHITECT

C 120 RECESSED FIXTURE LUMEN WERX #VIA 5RF-HLO-LED-80-1000-35-4'-120-D-1-W N/A 39W LED RECESSEDCE 120 RECESSED FIXTURE WITH EMERGENCY

BATTERY PACKLUMEN WERX #VIA5RF-HLO-LED-80-1000-35-4'-120-D-1-EB-W

N/A 39W LED RECESSED

D 120 LED TROFFER LITHONIA #2GTL-4-40L-RW-A19V-LP835 N/A 40W LED LAY-INDE 120 LED TROFFER LITHONIA #2GTL-4-40L-RW-A19V-LP835-EL14L N/A 40W LED LAY-INF 120 LED CAN LIGHT LITHONIA #LDN6-35/10-LO6AR N/A 18W LED RECESSED

FE 120 LED CAN LIGHT WITH EMERGENCYBATTERY PACK

LITHONIA #LDN6-35/10-LO6AR-EL N/A 18W LED RECESSED

G 120 RECESSED PERIMETER LIGHT FIXTURE PRUDENTIAL LIGHTING#BIO-PSTG-REG3"-1T5-XX-SAL-TMW-D1-SC-WTW-120-X3

1 32W T5 FLUOR RECESSED LIGHT FIXTURE TO RUN FROM WALL TOWALL

H 120 LED TROFFER CREE #ZR22-32L-35K N/A 34W LED LAY-INJ 120 LED TROFFER CREE #ZR24-40L-35K N/A 44W LED LAY-IN

JE 120 LED TROFFER WITH EMERGENCYBATTERY PACK

CREE #ZR24-40L-35K-EB14 N/A 44W LED LAY-IN

K 120 WALL MOUNTED LIGHT FIXTURE LEDS C4 #WILSON 05-9683-Z5-T2U N/A 6W LED WALL MOUNTED 6'-0" AFFL 120 UP LIGHT FIXTURE WINONA

#WLAWC801-YM1A-INT-12LONG-AL1A1-35K-MVOLTN/A 27W LED SURFACE MOUNTED

M 120 WALL MOUNTED LIGHT FIXTURE FINELITE #S17-LED-VCF-PF-XX-HO-3500K-SC-120V N/A 37W LED WALL MOUNTED 7'-0" AFF REFER TO DRAWINGS FOR FIXTURE LENGTHN 120 LED TROFFER LITHONIA #2GTL-4-40L-LP835 N/A 40W LED LAY-INP 120 SURFACE LED FIXTURE LITHONIA #ZL2N-L48-3000LM-MDD-MVOLT-35K-80CRI N/A 42W LED SURFACEX 120 EXIT LIGHT FIXTURE DUAL-LITE #LX-U-R-W-E-I N/A LED UNIVERSAL

SKE-5

E-702

M. MONTANOD. SANDOVAL


M

F

J

REMOVE AND REPLACE EXISTING TELEPHONECABINET. REFER TO SHEET E-201 FOR MORE

INFORMATION.EXISTING DATAEQUIPMENT TO REMAIN.REMOVE FORDEMOLITION ANDREINSTALL AFTERDEMOLITION.




100055.0004

08/28/15

REFERENCE SHEET:

1/4" = 1'-0"1 MUSIC BUILDING DEMOLITION PLAN ADDENDUM 3

SKE-6

ED-102



M

HDHD

T

MB- 21

MB MBPMC

SUB-FACP

TELE CABINET

STOMU-5A

STOxMU-4A

UTILITYxMU-5

REPLACE EXISTING TELEPHONE CABINETWITH NEW. RECONNECT TELPHONE SERVICE

TO NEW CABINET. RECONNECT IN A CLEANAND WORKMEN LIKE MANNER.PROVIDE

MODIFICATIONS NECESSARY FOR ACOMPLETE INSTALLATION. COORDINATEINSTALLATION WITH LOCAL TELEPHONE

COMPANY.

REINSTALL EXISTING DATA EQUIPMENT INSAME LOCATION.

MC- 30

CEF-2




100055.0004

08/28/15

REFERENCE SHEET:

1/8" = 1'-0"1 MUSIC BUILDING NEW POWER PLAN ADDENDUM 3

SKE-7

E-202



20 AMP GROUND FAULT INTERRUPTING DUPLEX CONVENIENCE RECEPTACLE, UP 18" OR ASINDICATED.

GFCI


HIGH SCHOOLCOMMONS & MUSICBLDG - ADDITIONSAND RENOVATIONS

200 CENTER ST., MORIARTY, NM 87035


100055.0004

08/28/2015

REFERENCE SHEET:

SKE-8

E-001


OS

J

MCMBPMB

UTILITYxMU-5

STOxMU-4A

N

NP

P

MB- 5




100055.0004

08/28/15

REFERENCE SHEET:

1/8" = 1'-0"1 MUSIC BUILDING NEW LIGHTING PLAN ADDENDUM 3

SKE-9E-102



of 2

SUBMITTAL REVIEW

Project Number: 100055.0004 Reviewed by: Michael Montano Project Title: MHS Remodel Checked by: Daniel Sandoval Date: 8-26-2015 Client: Greer Stafford

This submittal has been reviewed by the engineer in accordance with the specifications and project drawings. The review is only for general conformance with the design concept of the project and for general compliance with the plans and specifications AND shall not be construed as relieving the contractor of the full responsibility for: providing materials, equipment and work required by the contract, the proper installation and construction of the work, accuracy and completeness of the submittal, selection of the fabrication process and techniques of construction, and performing the work in a safe manner. Contractor shall be responsible to ensure that substituted fixtures shall perform and conform in all respects to those specified in Lighting Fixture Schedule, including efficiency, distribution and photometry.

KEY LIST

1. No exception taken 4. Revise and resubmit

2. Make corrections noted 5. Rejected – See Remarks

3. Submit specified item 6. Rejected – Not Prior Approved

SUBMITTALS

ITEM SPEC. OR DRAWING

KEY COMMENTS

Type AA, AAE, 2 Color by Architect.

Type A 2 Provide specified lamp lumen output and color temperature.

Type B, BE, C, CE, D, DE, H, J, JE, L, N, P, X

1

Type F, FE 2 Provide specified lamp color temperature.

Type G 5 Fixture requires 3” regression into ceiling, flanged trim for hard ceiling installation and direct/symmetric distribution.

Type K 5 Fixture length is too long.

320 Gold Ave. SW Suite 500 Albuquerque, NM 87102

Ph. 505-877-4499 Fax 505-242-0511

LIGHTING - I.W. INCORPORATED

Type B & BE, Custom Color by Architect

of 2

Type M 5 Fixture must have direct/indirect capability.

Date: Aug 20, 2015 Page 1/1

TransmittalIW INCORPORATED139 HEADINGLY NWALBUQUERQUE NM 87107Phone: (505) 821-0056From: Kala Swanson

FF00009 Page 1/1IW, Incorporated

Project MORIARTY HS COMMINS & MUSIC BUILDING

Quote# IWI ALBQ.15-2483Location MORIARTY NMTo GREER / STAFFORD

1717 LOUISIANA NE SUITE 205ALBUQUERQUE NM 87110Contact:

ATTACHED WE ARE SENDING YOU 1 COPIES OF THE FOLLOWING ITEMS:Drawings Specifications Other: Prints InformationPlans X Submittals

THESE ARE TRANSMITTED FOR:X Prior Approval Resubmittal for Approval Record

Approval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment

Type MFG PartA G LIGHTING GL-6000 A W DARK BRONZE 2 2' OAH

AA LSI INDUSTRIES XGBWM LED WT 48 350 NW UE BRZAAE LSI INDUSTRIES XGBWM LED WT 48 350 NW UE BRZ

CWBBB DECO LIGHTING ROND 2 20 35 UNV W M CXX DIM

BE DECO LIGHTING ROND 2 20 35 UNV W M CXX DIM EMC FORUM INC. SRT 46 FG 95LED35 SAT 4 UNIV WH

DIMCE FORUM INC. SRT 46 FG 95LED35 SAT 4 UNIV WH

DIM EMLEDD LSI INDUSTRIES GA24 LED SS WW UE 19INV

DE LSI INDUSTRIES GA24 LED SS WW UE 19INV EMF LITON LHFLD620C070UE D10

LRFLD6SWF110FE LITON LHFLD620C070UE D10 EM

LRFLD6SWF110G FORUM INC. SRT 44ASY FG 1T5 SAT XX UNV WH

DIMH LSI INDUSTRIES LPEC22 LED SS WW UEJ LSI INDUSTRIES LPEC24 LED HO WW UE

JE LSI INDUSTRIES LPEC24 LED HO WW UE EMK ELCAST LIGHTING 1906 D LED 120 SGL REBELLE LIGHTING 6000 32L 4 4K VOLT FINISHM LEGION LIGHTING 584LED 1 4 35 UNIV PERFN LSI INDUSTRIES GA24 LED SS WW UE 19INVP LSI INDUSTRIES SDL 4 LED SS WW UEX EVENLITE TLX EM RU W

of 2

SUBMITTAL REVIEW

Project Number: 100055.0004 Reviewed by: Michael Montano Project Title: MHS Remodel Checked by: Daniel Sandoval Date: 8-26-2015 Client: Greer Stafford This submittal has been reviewed by the engineer in accordance with the specifications and project drawings. The review is only for general conformance with the design concept of the project and for general compliance with the plans and specifications AND shall not be construed as relieving the contractor of the full responsibility for: providing materials, equipment and work required by the contract, the proper installation and construction of the work, accuracy and completeness of the submittal, selection of the fabrication process and techniques of construction, and performing the work in a safe manner. Contractor shall be responsible to ensure that substituted fixtures shall perform and conform in all respects to those specified in Lighting Fixture Schedule, including efficiency, distribution and photometry.

KEY LIST



3. Submit specified item 6. Rejected – Not Prior Approved SUBMITTALS

ITEM SPEC. OR DRAWING KEY COMMENTS

Type A, AA, AAE, B, BE, C, CE, D, DE, F, FE, G, H, J, JE, K, M, N, P, X

1

Type L 5

$-OS, OS-C, $D-2ZONE 1


Ph. 505-877-4499 Fax 505-242-0511

LIGHTING - RESOURCE LIGHTING


FF00010 Page 1/2Resource Lighting Inc 510 Kinley NE Albuquerque, NM 87102

Aug 20, 2015

Chris Van DyckGREER STAFFORD1717 LOUISIANA NEALBUQUERQUE NM 87110

RE: MORIARTY HIGH SCHOOL COMMONS & MUSIC - PRIORS

Dear Chris

Type MFG PartA VISA LIGHTING CP2022-L35K-L35K-WIDE-STD PTD

FINISHAA SPAULDING LIGHTING TRP-30L-4K-035-3-1-FINISH

AAE SPAULDING LIGHTING TRP-30L-4K-035-3-1-FINISH-BBUB FOCAL POINT FSDL-22-CX-2000L-35-120-L11-CXX

BE FOCAL POINT FSDL-22-CX-2000L-35-120-L11-CXX-EM

C LUMENWERX VIA5RF-HLO-LED-80-1000-35-4'-120-D-1-X-W

CE LUMENWERX VIA5RF-HLO-LED-80-1000-35-4'-120-D-1-EB-X-W

D COLUMBIA LIGHTING LJT24-35LWG-RA-A19(INV)-EUREGRESSED ALUM DOOR

DE COLUMBIA LIGHTING LJT24-35LWG-RA-A19(INV)-EU-ELL14F PRESCOLITE LIGHTING LC6LED120 6LCLED535K8 B24

LITEBOX 6 inch commercial LED downlight housing; 120 volt.FE PRESCOLITE LIGHTING LC6LED120EM 6LCLED535K8EM B24G FOCAL POINT FMG-NS-1T5-1C-120-S-L835-WH-

LENGTH PER DWGSH CREE LED LIGHTING SOLUTIONS ZR22-32L-35K-10V

ZR22-32L-35K-10VJ CREE LED LIGHTING SOLUTIONS ZR24-40L-35K-10V

ZR24-40L-35K-10VJE CREE LED LIGHTING SOLUTIONS ZR24-40L-35K-10V-EB14

ZR24-40L-35K-10V-EB14K LEDS-C4 05-9683-Z5-T2UL SPECTRUM LIGHTING ID7582-LEDOA26W-35K-DS101-WM-

FINISHM FINELITE S17-LED-VCF-PF-XX-HO-3500K-SC-

120VN COLUMBIA LIGHTING LJT24-35LWG-FSA12-EUP COLUMBIA LIGHTING LCL4-35LW-EU

FF00010 Page 2/2Resource Lighting Inc 510 Kinley NE Albuquerque, NM 87102

Type MFG PartX DUAL-LITE LXURW

LX Series Thermoplastic LED exit sign, AC only, red letters, whitestencil and housing, universal single or double face, with canopy kit,120/277VAC.

$-OS HUBBELL AUTOMATION LHMTS1-G-WHLightHawk Multi-Technology Wall Switch Sensor with IntelliDAPT, Single Circuit, One Button, 120/277VAC, 1000 Sq. Ft., Photocell, White

OS-C HUBBELL AUTOMATION OMNIDT2000BP1277OMNI-BP Passive Infrared & Ultrasonic Ceiling Sensor with IntelliDAPT, 2000 Sq. Ft., Line-Voltage, 120-277VAC

$D-2ZONE HUBBELL AUTOMATION NXSW-ORLO-WH$D-2ZONE HUBBELL AUTOMATION NXRC-1RD-UNV$D-2ZONE HUBBELL AUTOMATION CAT5-100F-OR$D-2ZONE HUBBELL AUTOMATION CAT5-25F-OR

of 2

SUBMITTAL REVIEW



KEY LIST




SUBMITTALS


KEY COMMENTS

Types “B”, “BE”, “C”, “CE”, “H”, “J”, “JE”, “K”, “X”

1

Type “M” 5


Ph. 505-877-4499 Fax 505-242-0511

LIGHTING - RKL SALES CORPORATION


of 2

SUBMITTAL REVIEW



KEY LIST




SUBMITTALS


KEY COMMENTS

Type A, B, BE, 2 Provide specified lamp lumen output and color temperature.

Type AA, AAE, C, CE, D, DE, F, FE, H, J, JE, K, L, N, P, X

1

Type G 5 Fixture requires 3” regression into ceiling.

Type M 5 No photometrics or distribution information to compare.


Ph. 505-877-4499 Fax 505-242-0511

LIGHTING - SCHROEDER SALES


TYPE SPECIFIED MFG PART NUMBER

SUBTITIUTION MFG PART NUMBER YES NO

A VOIGHT AMM-546-LED-4-2-X-OP-6"-DB-120 CAMIND AMM-546-LED-4-2-X-OP-6"-DB-120

AA LITHONIA WST- LED-2-104700/40K-SR3-120 MCGRAW IST-E02-LED-E1-BL3-MSF

AAE LITHONIA WST- LED-2-104700/40K-SR3-120-ELCW

MCGRAW IST-E02-LED-E1-BL3-MSF-BBB-XX

B FOCIAL POINT FSDL-22-CX-2000L-35-120-L11-CXX

CAMIND P1003-24-LED-VOLT-WA-MSF-DM(0-10V)

BE FOCIAL POINT FSDL-22-CX-2000L-35-120-L11-CXX-EM

CAMIND P1003-24-LED-VOLT-WA-MSF-DM(0-10V)-IEM

C LUMEN WERX VIA 5RF-HLO-LED-80-1000-35-4-120-W

NEORAY S125-DR-2-35-XXX-0047-1U-DD-1-W

CE LUMEN WERX VIA 5RF-HLO-LED-80-1000-35-4-120-EB-W

NEORAY S125-DR-2-35-XXX-0047-1U-DD-B-1-W

D LITHONIA 2GTL4-40L-RW-A19V-LP835 METLUX 24GR-RA-LD4-38-A-VOLT-L835-CD-1

DE LITHONIA 2GTL4-40L-RW-A19V-LP835-EL14L METLUX 24GR-RA-LD4-38-A-VOLT-EL14-L835-CD-1

F LITHONIA LDN6-35/10-LO6AR HALO PD610ED010 PDM6A835 61VC

FE LITHONIA LDN6-35/10-LO6AR-EL HALO PD610ED010IEM PDM6A835 61VEC

G PRUDENTIAL BIO-PSTG-REG3"-1T5-XX-SAL-TEMW-D1-SC-WTW-120-X3

NEORAY 22-DR-1-T5-SR-XX-VOLT-EB-S22R

H CREE ZR22-32L-35K METLUX 22CZ-LD4-34-UNV-L835-CD1-U

J CREE ZR22-40L-35K METLUX 24CZ-LD4-40-UNV-L835-CD1-U

JE CREE ZR22-40L-35K-EB14 METLUX 24CZ-LD4-40-UNV-EL10W-L835-CD1-U

K LEDS C4 05-9683-Z5-T21U LIGMAN UGI-31581-WHITE 2X4-W30-VOLT-C-MSF

L WINONA WLAWC801-YM1A-INT-12'-AL1A1-35K-MVOLT

AMETRI ASYX-WM-S1-ID-U-F-L35-1-VOLT-MSF-R-STD-

M FINELITE S17-LED-VCF-PF-XX-HO-3500K-SC120V

CORELI JWWM-1L-35-1-D-UNV-SU-WA-XX

N LITHONIA 2GT4-40L-LP835 METLUX 24GR-RA-LD4-38-A-VOLT-L835-CD-1

P LITHONIA ZL2N-L48-3000L-M-MVOLT-35K-80CRI

METLUX 4SNLED-LD4-41SL-LW-UNV-L835-CD1-U

X DUALLITE LX-U-R-W SURLIT LPX7SD

APPROVAL:

SCHROEDER SALES, INC.215 Gold Avenue, S.W.

Albuquerque, New Mexico 87102Voice (505) 764-1850 * Fax (505) 764-1920

SPECIFER: GREER STAFFORD / VERTTERRE CORPNAME: MORIARTY HS COMMONS & MUSIC BLDG

JOB# 16431 BID DATE: 9/3/15

PRIOR APPROVAL REQUEST FOR SUBSTITUTION