Food-Tek Products and Applications

Agenda

• NSF registrations

• Food-Tek range

• Food-Tek Applications

NSF• NSF International are: -

– Non governmental– Not for profit– Public Health & Safety company

• Founded in 1944, started registrations in 1999

• Register non food products for use in the food industry

• Recognised as the worldwide authority for food safety in lubricants

• Register to H1, H2 or 3H

NSF Registrations

• H1 – Product can come into incidental contact with food

• H2 – Absolutely no contact with food

• 3H – Release agents, food processing products, potentially part of the ingredients of the food

• HT1 – Heat transfer fluids that have incidental contact

Mako-Lube Food-Tek Range• All food-Tek products are NSF

H1, 3H or K2 registered

• H1 Products for “incidental food contact”

• 3H products for “direct food contact”

• Food-Tek HD Cleaner is NSF K2 registered

Food-Tek Range

• We ensure total food safety by: -– Using only FDA listed

ingredients– Apply for NSF registration

• Food-Tek products do not contain– Nut Oils– GM Products– Animal derivatives

Mako-Lube Food-Tek Range• Food-Tek NSF H1 Registered– Bearing greases– Chain Lubes– Gearbox fluids (enclosed

and open)– Assembly and anti-seize

compounds– Hydraulic & Compressor

Fluids– Airline Lubricants– Penetrating Fluids– Maintenance sprays

Food-Tek Bearing Greases

• Food Grease HD

• Food Grease 3H

• Synfood EP 2, 00

• Silfood HT

Food Grease HD

• Calcium thickener – Water Resistant• Temperature range -20ºc to +110ºc• Contains anti – wear additives• Available in NLGI 2• Very good, low cost all round grease• Superb corrosion resistance• High Dropping Point – will not run• Contains PTFE for friction reduction

Food Grease 3H

• Direct Food Contact Registered• Temperature range -10ºc to +110ºc• Contains anti – wear additives• Available in NLGI 2• Excellent corrosion protection• Use on mixer, slicer, chopping and mincer blades to

prevent overnight corrosion• Use on equipment that can be in contact with food stuff

Synfood EP Grease

• Aluminium Complex thickener – Waterproof• Contains Teflon (PTFE) for increased friction reduction• Temperature range -50ºc to +180ºc• Excellent for high temperature applications• Fully synthetic for longer life• Available in NLGI 00 & 2• Good shock load and extreme pressure properties• Increases component life• Extends lubrication intervals• Superb corrosion resistance

Silfood HT• Silica thickener – Thermally stable• Temperature range -20ºc to +220ºc• Contains PTFE for added wear resistance• Excellent for high temperature applications• Silicone base fluid, excellent for low temp and

long life• Excellent chemical resistance• Inert to most materials, does not effect rubber

and plastics• WRAS approved for potable water

Food-Tek Chain Lubricants

• Chain Oil AF

• HT Chain Oil Plus

• Arctic Chain Oil

• Multi-Lube

• Food Grade Oil 3H

Chain Oil AF

• Suitable for all chain types• Fully synthetic for long life and extended

lubrication intervals• High viscosity Index – thermally stable• Excellent temperature range -30ºc to + 200ºc• Extremely adhesive – no fling• Very good corrosion resistance• Completely demulsifies water

HT Chain Oil Plus

• Suitable for all chain types• Fully synthetic for long life and extended lubrication

intervals• Clear Oil with no solids – extended wet life, clean burning• High viscosity Index – thermally stable• Extreme high temperature resistance to +270ºc• Excellent EP and anti-wear properties

Arctic Chain Oil

• Suitable for all chain types• Fully synthetic for long life and extended lubrication

intervals• Prevents rust and oxidation – chains last longer• Excellent wear resistance – reduces friction• Extreme low temperature to -54°c• Completely demulsifies water• Ideal for spiral freezers

Multi-Lube• Suitable for all chain types• Fully synthetic for long life and extended lubrication

intervals• Contains PTFE/ Teflon to increase wear resistance• Water resistant – removes water and moisture• Eliminates squeaks and fretting corrosion• Excellent penetrating properties• Convenient packaging – Handy Trigger and Aerosol• Truly Multi-functional – Replaces many different products

Food Grade Oil 3H

• NSF Registered for “Direct Food Contact”• Thin Film Protection, Lubrication• Can be used in Handy “Trigger Spray” or Automatic

Lubrication • Comply with New more stringent regulations• Applications :- • Blades – Meat processing, cardboard mfr, packaging &

sealing• Slat Conveyors – Applied to bottling lines for slat lubrication• Release Agent – Chopping boards, trays, working surfaces• Drawing Fluid – Aluminium forming & drawing ie. Food

Trays etc

Food-Tek- Service Lubricants

• Translube• HD Hydraulic Oil• Synthetic Hydraulic Oil• Airline Lube• Multi-Tak Compound• Foodcom

Translube Gear Oil

• Available in ISO VG 150, 220, 320, 460 & 680• Fully synthetic for long life and extended

lubrication intervals • Excellent demulsibility• Very good corrosion protection• Anti wear protection to reduce wear and friction• Oxidation inhibited to increase life of oil and

extend drain intervals• Excellent Chemical stability to reduce sludge and

varnish build up

HD Hydraulic Oil

• Available in ISO VG 32, 46, 68• High demulsibility – excellent water separation• Excellent anti wear properties to protect

pumps, motors and actuators• Compatible with most common seal materials• Corrosion and oxidation stable to give long

trouble free life• Low foaming properties

Synthetic Hydraulic Oil• Available in ISO VG 32, 46 & 68• Suitable for all hydraulic systems• Fully synthetic for long life and extended drain intervals• Exceptional demulsibility – complete and rapid water

separation• Excellent anti wear properties to protect pumps, motors

and actuators• Compatible with most common seal materials and other

hydraulic fluids• Corrosion and oxidation stable to give long trouble free

life and reduce varnish and sludge build up• High Viscosity index for maximum performance

Airline Lube

• Suitable for airlines and pneumatic tools• Emulsifies with water to eliminate sticking and

clogging• Low co-efficient of friction - reduces friction

and wear• Corrosion and oxidation stable to maximise air

tool and equipment life• Colourless, odourless and tasteless• Also suitable for circulation systems

Multi-Tak Compound

• Ideal for threads, slides, guides, cams, couplings and splines, and also as an assembly lube

• High solid content – prevents seizing and galling• Extreme temperature range of -30ºc to +1100ºc• Contains PFTE to increase anti-wear properties and

reduce friction• Extremely tacky, sticks to all surfaces• Resists water and chemicals to protect in harsh

environments

Foodcom Compressor Oils

• Available in ISO VG 46, 68 for rotary compressors and in ISO VG100 for reciprocating compressors

• Suitable for all Compressors• Fully synthetic for long life and extended drain intervals• Exceptional demulsibility – complete and rapid water

separation• Excellent anti wear properties to protect equipment and

lower energy costs• Corrosion and oxidation stable to give long trouble free

life and reduce varnish and sludge build up• Low foaming reduces risk of carry over

Food-Tek Aerosols

• Multi-Lube Spray

• WD Penetrating Spray

• Dry PTFE Spray

• Silicone Spray

• Spray Grease

• HD Cleaner Spray

Mako-Lube LubricantsGlobal Lubrication Solutions

• Excellent Food-Tek NSF H1/3H registered range

• Complementary huge range of top quality industrial and PFPE products

• Focused approach

• Proven Value

• Superior products and service

• Win-Win Partnership

Thank You

Any Questions