adande single drawer - built in flat base · single drawer - built in flat base ... fbt 052016...
TRANSCRIPT
ADANDE™ SINGLE DRAWER - Built in Flat Base
It’s an Adande™; it works like no other fridge or freezer...
Tel: +1 214 725 6795 | Email: [email protected] | www.adandeusa.com
PROJECT:
ITEM NUMBER:
QUANTITY:
MODEL NUMBER:
(+15˚C) (-22˚C)+59˚F -7.6˚F
FBT 052016
STANDARD FEATURES
DRAWER SYSTEM
• Convertible Refrigeration System
(Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Container
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
REMOVABLE INSULATED DRAWER CONTAINERThe Adande design allows removal of the drawer container for deep cleaning or pre-loading. The container is made from impact resistant high density ABS polyurethane plastic, which provides exceptional insulation value. Furthermore, users do not have to leave air gaps between food items in the container, unlike traditional refrigeration, where over filling results in hot spots.
TEMPERATURE STATEMENTThe unit is fitted with an electronic controller which allows the operator, at the touch of a button, to set the temperature to freezer operation at -7.6°F (-22°C) or fridge mode, up to +59°F (+15°C)
CABINET EXTERIOR/INTERIORThe high grade stainless steel interior/exterior makes the cabinet robust and durable over the long term, with a beautiful finish and easy to clean and maintain surfaces.
ELECTRICAL Standard 120 volt with NEMA 5-15 cord and plug. Hard-wired plug in multi-stack applications, allows up to three units on one wall circuit.
For ease of access, on opening the drawer, all products are in full plan view. Furthermore, with the Adande design, the tracks are external to the cold insulated drawer container, offering a more reliable and durable system - one that is not prone to blocked condensers from airborne debris, which is a common problem with traditional refrigeration equipment. The drawer tracks, made from corrosion resistant coated steel, are extremely robust, having been tested with over 300,000 cycles (100 pounds test per drawer) without failure.
‘HOLD THE COLD’™ REFRIGERATIONAdande’s patented technology restricts cooling to the insulated container within the drawer, with low velocity cooling incrementally adjustable from 59°F (+15°C) to -7.6°F (-22°C) gently dropping air onto the contents creating the perfect micro-climate for foodstuffs. Patented horizontal magnetic seals are protected within the top of the cabinet which also houses the fans that draw warm air upward and over the evaporator for efficient heat removal, reducing humidity and saving energy. USA Service & Warranty
full warranty conditions available on request
2 Years parts and labor (including seals)
5 Year warranty on compressors
Dimensions | Elevation & Plan View
Plan View
Front View
L D H No. of Drawers
Storage(Cubic feet)
Comp.Size
AmpDraw(actual)
Refrig. Power Usage (per day)
Freezer Power Usage
(per day)
Volt NEMA Ship Weight
(lbs)
43.3” 27.6” 16.5” 1 2.8 5.4cc 5A 1.29 kw 3.43 kw 120 5-15p
Performance Data
Height & Weight Loading
Side View Drawer Extended
ADANDE™ SINGLE DRAWER - Built in Flat Base
Code Type Finished Height Weight Loading
VCS1/FBT FLAT BASE & COVER TOP 16.1” (411 mm) 0 lb (0 kg)
VCS1/FBW FLAT BASE & SOLID TOP 16.5” (421 mm) 441 lb (200 kg)
VCS2/FBT FLAT BASE & COVER TOP 31.5” (801 mm) 0 lb (0 kg)
Options/Accessories
Drawer Dividers
Pan Racks
Pacojet Racks
Worktop Upstand
Extended Worktop
Insulated Container
Marine Edge
[1100]43.3”[233]
9.2”
[411]16.1”
[867]34.1”
[287]11.3”
[75]2.9”
[700]27.6”
[738]29.1”
[723]28.5”
[647]25.5”
[304]12.0”
Technical Data
Climate Testing: Tested to Climate Standard 5 (104°F (40°C) and 40% relative humidity)
Temp Flexibility -7.6°F to +59°F set point by user
Operating Temp +59°F to +109.4°F
Defrost Automatic Electric
Mains 120 Vac 60 Hz
Supply Cord NEMA 5-15 3 pin socket 2m length.
Casing Material Foodservice grade S/S
Drawer Material ABS plastic, Zero ODP PU foam
Max Drawer Loading 88 lb (40 kg)
Average Unit Weights 253 lb (115 kg) Single Drawer / 386 lb (175 kg) Two Drawers
Refrigerant Type HFC R404a
[1100]43.3”
[700]27.6”
ADANDE™ SINGLE DRAWER - Under Counter Unit
It’s an Adande™; it works like no other fridge or freezer...
Tel: +1 214 725 6795 | Email: [email protected] | www.adandeusa.com
PROJECT:
ITEM NUMBER:
QUANTITY:
MODEL NUMBER:
(+15˚C) (-22˚C)+59˚F -7.6˚F
SINGLE UNDERCOUNTER 052016
STANDARD FEATURES
DRAWER SYSTEM
• Convertible Refrigeration System
(Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Container
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
REMOVABLE INSULATED DRAWER CONTAINERThe Adande design allows removal of the drawer container for deep cleaning or pre-loading. The container is made from impact resistant high density ABS polyurethane plastic, which provides exceptional insulation value. Furthermore, users do not have to leave air gaps between food items in the container, unlike traditional refrigeration, where over filling results in hot spots.
TEMPERATURE STATEMENTThe unit is fitted with an electronic controller which allows the operator, at the touch of a button, to set the temperature to freezer operation at -7.6°F (-22°C) or fridge mode, up to +59°F (+15°C)
CABINET EXTERIOR/INTERIORThe high grade stainless steel interior/exterior makes the cabinet robust and durable over the long term, with a beautiful finish and easy to clean and maintain surfaces.
ELECTRICAL Standard 120 volt with NEMA 5-15 cord and plug. Hard-wired plug in multi-stack applications, allows up to three units on one wall circuit.
For ease of access, on opening the drawer, all products are in full plan view. Furthermore, with the Adande design, the tracks are external to the cold insulated drawer container, offering a more reliable and durable system - one that is not prone to blocked condensers from airborne debris, which is a common problem with traditional refrigeration equipment. The drawer tracks, made from corrosion resistant coated steel, are extremely robust, having been tested with over 300,000 cycles (100 pounds test per drawer) without failure.
‘HOLD THE COLD’™ REFRIGERATIONAdande’s patented technology restricts cooling to the insulated container within the drawer, with low velocity cooling incrementally adjustable from 59°F (+15°C) to -7.6°F (-22°C) gently dropping air onto the contents creating the perfect micro-climate for foodstuffs. Patented horizontal magnetic seals are protected within the top of the cabinet which also houses the fans that draw warm air upward and over the evaporator for efficient heat removal, reducing humidity and saving energy. USA Service & Warranty
full warranty conditions available on request
2 Years parts and labor (including seals)
5 Year warranty on compressors
Dimensions | Elevation & Plan View
Plan View
Front View
L D H No. of Drawers
Storage(Cubic feet)
Comp.Size
AmpDraw(actual)
Refrig. Power Usage (per day)
Freezer Power Usage
(per day)
Volt NEMA Ship Weight
(lbs)
43.3” 27.6” 16.1” 1 2.8 5.4cc 5A 1.29 kw 3.43 kw 120 5-15p
Performance Data
Height & Weight Loading
Side View Drawer Extended
ADANDE™ SINGLE DRAWER - Under Counter Unit
Code Type Finished Height Weight Loading
VCS1/HCT HIGH CASTERS 21.6” (548 mm) 0 lb (0 kg)
VCS1/CT STANDARD CASTERS 19.7” (501 mm) 0 lb (0 kg)
VCS1/SCT SMALL CASTERS 18.4” (468 mm) 0 lb (0 kg)
Options/Accessories
Drawer Dividers
Pan Racks
Pacojet Racks
Worktop Upstand
Extended Worktop
Insulated Container
Marine Edge
[1100]43.3”[233]
9.2”
[411]16.1”
[867]34.1”
[287]11.3”
[75]2.9”
[700]27.6”
[738]29.1”
[723]28.5”
[647]25.5”
[304]12.0”
Technical Data
Climate Testing: Tested to Climate Standard 5 (104°F (40°C) and 40% relative humidity)
Temp Flexibility -7.6°F to +59°F set point by user
Operating Temp +59°F to +109.4°F
Defrost Automatic Electric
Mains 120 Vac 60 Hz
Supply Cord NEMA 5-15 3 pin socket 2m length.
Casing Material Foodservice grade S/S
Drawer Material ABS plastic, Zero ODP PU foam
Max Drawer Loading 88 lb (40 kg)
Average Unit Weights 253 lb (115 kg) Single Drawer / 386 lb (175 kg) Two Drawers
Refrigerant Type HFC R404a
[1100]43.3”
[700]27.6”
ADANDE™ SINGLE DRAWER - Solid Worktop
It’s an Adande™; it works like no other fridge or freezer...
Tel: +1 214 725 6795 | Email: [email protected] | www.adandeusa.com
PROJECT:
ITEM NUMBER:
QUANTITY:
MODEL NUMBER:
(+15˚C) (-22˚C)+59˚F -7.6˚F
SINGLE DRAWER 052016
STANDARD FEATURES
DRAWER SYSTEM
• Convertible Refrigeration System
(Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Container
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
REMOVABLE INSULATED DRAWER CONTAINERThe Adande design allows removal of the drawer container for deep cleaning or pre-loading. The container is made from impact resistant high density ABS polyurethane plastic, which provides exceptional insulation value. Furthermore, users do not have to leave air gaps between food items in the container, unlike traditional refrigeration, where over filling results in hot spots.
TEMPERATURE STATEMENTThe unit is fitted with an electronic controller which allows the operator, at the touch of a button, to set the temperature to freezer operation at -7.6°F (-22°C) or fridge mode, up to +59°F (+15°C)
CABINET EXTERIOR/INTERIORThe high grade stainless steel interior/exterior makes the cabinet robust and durable over the long term, with a beautiful finish and easy to clean and maintain surfaces.
ELECTRICAL Standard 120 volt with NEMA 5-15 cord and plug. Hard-wired plug in multi-stack applications, allows up to three units on one wall circuit.
For ease of access, on opening the drawer, all products are in full plan view. Furthermore, with the Adande design, the tracks are external to the cold insulated drawer container, offering a more reliable and durable system - one that is not prone to blocked condensers from airborne debris, which is a common problem with traditional refrigeration equipment. The drawer tracks, made from corrosion resistant coated steel, are extremely robust, having been tested with over 300,000 cycles (100 pounds test per drawer) without failure.
‘HOLD THE COLD’™ REFRIGERATIONAdande’s patented technology restricts cooling to the insulated container within the drawer, with low velocity cooling incrementally adjustable from 59°F (+15°C) to -7.6°F (-22°C) gently dropping air onto the contents creating the perfect micro-climate for foodstuffs. Patented horizontal magnetic seals are protected within the top of the cabinet which also houses the fans that draw warm air upward and over the evaporator for efficient heat removal, reducing humidity and saving energy. USA Service & Warranty
full warranty conditions available on request
2 Years parts and labor (including seals)
5 Year warranty on compressors
Dimensions | Elevation & Plan View
Plan View
Front View
L D H No. of Drawers
Storage(Cubic feet)
Comp.Size
AmpDraw(actual)
Refrig. Power Usage (per day)
Freezer Power Usage
(per day)
Volt NEMA Ship Weight
(lbs)
43.3” 27.6” 16.5” 1 2.8 5.4cc 5A 1.29 kw 3.43 kw 120 5-15p
Performance Data
Height & Weight Loading
Side View Drawer Extended
ADANDE™ SINGLE DRAWER - Solid Worktop
Code Type Finished Height Weight Loading
VCS1/HCW HIGH CASTERS 22” (558 mm) 518 lb (235 kg)
VCS1/CW STANDARD CASTERS 20” (510 mm) 661 lb (300 kg)
VCS1/SCW SMALL CASTERS 18.8” (478 mm) 110 lb (50 kg)
Options/Accessories
Drawer Dividers
Pan Racks
Pacojet Racks
Worktop Upstand
Extended Worktop
Insulated Container
Marine Edge
[1100]43.3”[233]
9.2”
[419]16.5”
[867]34.1”
[287]11.3”
[75]2.9”
[700]27.6”
[738]29.1”
[723]28.5”
[647]25.5”
[304]12.0”
Technical Data
Climate Testing: Tested to Climate Standard 5 (104°F (40°C) and 40% relative humidity)
Temp Flexibility -7.6°F to +59°F set point by user
Operating Temp +59°F to +109.4°F
Defrost Automatic Electric
Mains 120 Vac 60 Hz
Supply Cord NEMA 5-15 3 pin socket 2m length.
Casing Material Foodservice grade S/S
Drawer Material ABS plastic, Zero ODP PU foam
Max Drawer Loading 88 lb (40 kg)
Average Unit Weights 253 lb (115 kg) Single Drawer / 386 lb (175 kg) Two Drawers
Refrigerant Type HFC R404a
[1100]43.3”
[700]27.6”
ADANDE™ CHEF BASE UNIT - Heat Shield Top
It’s an Adande™; it works like no other fridge or freezer...
Tel: +1 214 725 6795 | Email: [email protected] | www.adandeusa.com
PROJECT:
ITEM NUMBER:
QUANTITY:
MODEL NUMBER:
(+15˚C) (-22˚C)+59˚F -7.6˚F
STANDARD FEATURES
DRAWER SYSTEM
• Convertible Refrigeration System
(Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Container
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
REMOVABLE INSULATED DRAWER CONTAINERThe Adande design allows removal of the drawer container for deep cleaning or pre-loading. The container is made from impact resistant high density ABS polyurethane plastic, which provides exceptional insulation value. Furthermore, users do not have to leave air gaps between food items in the container, unlike traditional refrigeration, where over filling results in hot spots.
TEMPERATURE STATEMENTThe unit is fitted with an electronic controller which allows the operator, at the touch of a button, to set the temperature to freezer operation at -7.6°F (-22°C) or fridge mode, up to +59°F (+15°C)
CABINET EXTERIOR/INTERIORThe high grade stainless steel interior/exterior makes the cabinet robust and durable over the long term, with a beautiful finish and easy to clean and maintain surfaces.
ELECTRICAL Standard 120 volt with NEMA 5-15 cord and plug. Hard-wired plug in multi-stack applications, allows up to three units on one wall circuit.
For ease of access, on opening the drawer, all products are in full plan view. Furthermore, with the Adande design, the tracks are external to the cold insulated drawer container, offering a more reliable and durable system - one that is not prone to blocked condensers from airborne debris, which is a common problem with traditional refrigeration equipment. The drawer tracks, made from corrosion resistant coated steel, are extremely robust, having been tested with over 300,000 cycles (100 pounds test per drawer) without failure.
‘HOLD THE COLD’™ REFRIGERATIONAdande’s patented technology restricts cooling to the insulated container within the drawer, with low velocity cooling incrementally adjustable from 59°F (+15°C) to -7.6°F (-22°C) gently dropping air onto the contents creating the perfect micro-climate for foodstuffs. Patented horizontal magnetic seals are protected within the top of the cabinet which also houses the fans that draw warm air upward and over the evaporator for efficient heat removal, reducing humidity and saving energy. USA Service & Warranty
full warranty conditions available on request
2 Years parts and labor (including seals)
5 Year warranty on compressors
CHEF BASE 052016
Dimensions | Elevation & Plan View
Plan View
Front View
L D H No. of Drawers
Storage(Cubic feet)
Comp.Size
AmpDraw(actual)
Refrig. Power Usage (per day)
Freezer Power Usage
(per day)
Volt NEMA Ship Weight
(lbs)
43.3” 27.6” 18.2” 1 2.8 5.4cc 5A 1.29 kw 3.43 kw 120 5-15p
Performance Data
Height & Weight Loading
Side View Drawer Extended
ADANDE™ CHEF BASE UNIT - Heat Shield Top
Code Type Finished Height Weight Loading
VCS1/HCHS HIGH CASTERS 23.6” (600 mm) 518 lb (235 kg)
VCS1/CHS STANDARD CASTERS 21.7” (552 mm) 661 lb (300 kg)
Options/Accessories
Drawer Dividers
Pan Racks
Pacojet Racks
Worktop Upstand
Extended Worktop
Insulated Container
Marine Edge
Technical Data
Climate Testing: Tested to Climate Standard 5 (104°F (40°C) and 40% relative humidity)
[1100]43.3”[233]
9.2”
[463]18.2”
[867]34.1”
[287]11.3”
[75]2.9”
[700]27.6”[738]29.1”
[723]28.5”
[647]25.5”
[304]12.0”
Temp Flexibility -7.6°F to +59°F set point by user
Operating Temp +59°F to +109.4°F
Defrost Automatic Electric
Mains 120 Vac 60 Hz
Supply Cord NEMA 5-15 3 pin socket 2m length.
Casing Material Foodservice grade S/S
Drawer Material ABS plastic, Zero ODP PU foam
Max Drawer Loading 88 lb (40 kg)
Average Unit Weights 253 lb (115 kg) Single Drawer / 386 lb (175 kg) Two Drawers
Refrigerant Type HFC R404a
[1100]43.3”
[700]27.6”
ADANDE™ DOUBLE DRAWER - Under Counter Unit
It’s an Adande™; it works like no other fridge or freezer...
Tel: +1 214 725 6795 | Email: [email protected] | www.adandeusa.com
PROJECT:
ITEM NUMBER:
QUANTITY:
MODEL NUMBER:
(+15˚C) (-22˚C)+59˚F -7.6˚F
DOUBLE UNDERCOUNTER 052016
STANDARD FEATURES
DRAWER SYSTEM
• Convertible Refrigeration System
(Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Container
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
REMOVABLE INSULATED DRAWER CONTAINERThe Adande design allows removal of the drawer container for deep cleaning or pre-loading. The container is made from impact resistant high density ABS polyurethane plastic, which provides exceptional insulation value. Furthermore, users do not have to leave air gaps between food items in the container, unlike traditional refrigeration, where over filling results in hot spots.
TEMPERATURE STATEMENTThe unit is fitted with an electronic controller which allows the operator, at the touch of a button, to set the temperature to freezer operation at -7.6°F (-22°C) or fridge mode, up to +59°F (+15°C)
CABINET EXTERIOR/INTERIORThe high grade stainless steel interior/exterior makes the cabinet robust and durable over the long term, with a beautiful finish and easy to clean and maintain surfaces.
ELECTRICAL Standard 120 volt with NEMA 5-15 cord and plug. Hard-wired plug in multi-stack applications, allows up to three units on one wall circuit.
For ease of access, on opening the drawer, all products are in full plan view. Furthermore, with the Adande design, the tracks are external to the cold insulated drawer container, offering a more reliable and durable system - one that is not prone to blocked condensers from airborne debris, which is a common problem with traditional refrigeration equipment. The drawer tracks, made from corrosion resistant coated steel, are extremely robust, having been tested with over 300,000 cycles (100 pounds test per drawer) without failure.
‘HOLD THE COLD’™ REFRIGERATIONAdande’s patented technology restricts cooling to the insulated container within the drawer, with low velocity cooling incrementally adjustable from 59°F (+15°C) to -7.6°F (-22°C) gently dropping air onto the contents creating the perfect micro-climate for foodstuffs. Patented horizontal magnetic seals are protected within the top of the cabinet which also houses the fans that draw warm air upward and over the evaporator for efficient heat removal, reducing humidity and saving energy. USA Service & Warranty
full warranty conditions available on request
2 Years parts and labor (including seals)
5 Year warranty on compressors
Dimensions | Elevation & Plan View
Plan View
Front View
L D H No. of Drawers
Storage(Cubic feet)
Comp.Size
AmpDraw(actual)
Refrig. Power Usage (per day)
Freezer Power Usage
(per day)
Volt NEMA Ship Weight
(lbs)
43.3” 27.6” 31.5” 2 5.6 5.4cc each
10A 2.58 kw 6.86 kw 120 5-15p
Performance Data
Height & Weight Loading
Side View Drawer Extended
ADANDE™ DOUBLE DRAWER - Under Counter Unit
Code Type Finished Height Weight Loading
VCS2/CT STANDARD CASTERS 35” (891 mm) 0 lb (0 kg)
VCS2/SCT SMALL CASTERS 33.8” (858 mm) 0 lb (0 kg)
Options/Accessories
Drawer Dividers
Pan Racks
Pacojet Racks
Worktop Upstand
Extended Worktop
Insulated Container
Marine Edge
[1100]43.3”[233]
9.2”
[801]31.5”
[867]34.1”
[287]11.3”
[75]2.9”
[700]27.6”
[738]29.1”
[723]28.5”
[647]25.5”
[304]12.0”
Technical Data
Climate Testing: Tested to Climate Standard 5 (104°F (40°C) and 40% relative humidity)
Temp Flexibility -7.6°F to +59°F set point by user
Operating Temp +59°F to +109.4°F
Defrost Automatic Electric
Mains 120 Vac 60 Hz
Supply Cord NEMA 5-15 3 pin socket 2m length.
Casing Material Foodservice grade S/S
Drawer Material ABS plastic, Zero ODP PU foam
Max Drawer Loading 88 lb (40 kg)
Average Unit Weights 253 lb (115 kg) Single Drawer / 386 lb (175 kg) Two Drawers
Refrigerant Type HFC R404a
[1100]43.3”
[700]27.6”
ADANDE™ DOUBLE DRAWER - Counter Unit
It’s an Adande™; it works like no other fridge or freezer...
Tel: +1 214 725 6795 | Email: [email protected] | www.adandeusa.com
PROJECT:
ITEM NUMBER:
QUANTITY:
MODEL NUMBER:
(+15˚C) (-22˚C)+59˚F -7.6˚F
DOUBLE DRAWER 052016
STANDARD FEATURES
DRAWER SYSTEM
• Convertible Refrigeration System
(Refrigerator to Freezer)
• Point-of-use Size and Design
• Precise Temperature Control
• Patented In-drawer Cooling System
• Removable Insulated Drawer Container
• Ambient Drawer Track System
• Full-Extension Drawer System
• 100% Front Breathing
• Horizontal Gasket is Out of Harms Way
• Individual Compressor Per Drawer
REMOVABLE INSULATED DRAWER CONTAINERThe Adande design allows removal of the drawer container for deep cleaning or pre-loading. The container is made from impact resistant high density ABS polyurethane plastic, which provides exceptional insulation value. Furthermore, users do not have to leave air gaps between food items in the container, unlike traditional refrigeration, where over filling results in hot spots.
TEMPERATURE STATEMENTThe unit is fitted with an electronic controller which allows the operator, at the touch of a button, to set the temperature to freezer operation at -7.6°F (-22°C) or fridge mode, up to +59°F (+15°C)
CABINET EXTERIOR/INTERIORThe high grade stainless steel interior/exterior makes the cabinet robust and durable over the long term, with a beautiful finish and easy to clean and maintain surfaces.
ELECTRICAL Standard 120 volt with NEMA 5-15 cord and plug. Hard-wired plug in multi-stack applications, allows up to three units on one wall circuit.
For ease of access, on opening the drawer, all products are in full plan view. Furthermore, with the Adande design, the tracks are external to the cold insulated drawer container, offering a more reliable and durable system - one that is not prone to blocked condensers from airborne debris, which is a common problem with traditional refrigeration equipment. The drawer tracks, made from corrosion resistant coated steel, are extremely robust, having been tested with over 300,000 cycles (100 pounds test per drawer) without failure.
‘HOLD THE COLD’™ REFRIGERATIONAdande’s patented technology restricts cooling to the insulated container within the drawer, with low velocity cooling incrementally adjustable from 59°F (+15°C) to -7.6°F (-22°C) gently dropping air onto the contents creating the perfect micro-climate for foodstuffs. Patented horizontal magnetic seals are protected within the top of the cabinet which also houses the fans that draw warm air upward and over the evaporator for efficient heat removal, reducing humidity and saving energy. USA Service & Warranty
full warranty conditions available on request
2 Years parts and labor (including seals)
5 Year warranty on compressors
Dimensions | Elevation & Plan View
Plan View
Front View
L D H No. of Drawers
Storage(Cubic feet)
Comp.Size
AmpDraw(actual)
Refrig. Power Usage (per day)
Freezer Power Usage
(per day)
Volt NEMA Ship Weight
(lbs)
43.3” 27.6” 31..9” 2 5.6 5.4cc each
10A 2.58 kw 6.86 kw 120 5-15p
Performance Data
Height & Weight Loading
Side View Drawer Extended
ADANDE™ DOUBLE DRAWER - Counter Unit
Code Type Finished Height Weight Loading
VCS2/CW STANDARD CASTERS 35.4” (900 mm) 507 lb (230 kg)
VCS2/SCW SMALL CASTERS 34.2” (868 mm) 0 lb (0 kg)
Options/Accessories
Drawer Dividers
Pan Racks
Pacojet Racks
Worktop Upstand
Extended Worktop
Insulated Container
Marine Edge
[1100]43.3”[233]
9.2”
[809]31.9”
[867]34.1”
[287]11.3”
[75]2.9”
[700]27.6”
[738]29.1”
[723]28.5”
[647]25.5”
[304]12.0”
[1100]43.3”
[700]27.6”
Technical Data
Climate Testing: Tested to Climate Standard 5 (104°F (40°C) and 40% relative humidity)
Temp Flexibility -7.6°F to +59°F set point by user
Operating Temp +59°F to +109.4°F
Defrost Automatic Electric
Mains 120 Vac 60 Hz
Supply Cord NEMA 5-15 3 pin socket 2m length.
Casing Material Foodservice grade S/S
Drawer Material ABS plastic, Zero ODP PU foam
Max Drawer Loading 88 lb (40 kg)
Average Unit Weights 253 lb (115 kg) Single Drawer / 386 lb (175 kg) Two Drawers
Refrigerant Type HFC R404a