drawer runners
TRANSCRIPT
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 1/22
Drawer RunnersHệ thống ray trượtContents / Mục l ục
Drawer RunnersHệ thống ray trư ợ t 7
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 2/22
Drawer RunnersHệ thống ray trượtContents / Mục l ục
“Customer’s satisfaction is our first priorit y ”.
S ự hài l òng của khách hàng l à ưu tiên hàng đầu của chú ng tôi ”
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 3/22
FF 7.2
7
Drawer RunnersHệ thống ray trượtContents / Nội d ung
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 4/22
Concealed Runners
Ray aâm
Accessories
Phuï kieän
Single extentionMôû 3/4 hoäc ngaên keùo tuû ............................................. 7.18
Full extentionMôû toaøn phaàn ngaên keùo tuû , taûi troïng 227 kg ..............7.15
Two ways travel RunnerRay môû hai chieàu ........................................................ 7.17
Soft and Self close mechanismCô caáu ñoùng giaûm chaán ................................................ 7.8
Full extensionMôû toaøn phaàn ngaên keùo tuû ........................................ 7.19
AccessoriesPhuï kieän ................................................................ 7.20
Roller Runner
Ray baùnh xe
Ball Bearing Runners
Ray bi
Single extensionMôû 3/4 hoäc ngaên keùo tuûû...............................................7.16
Full extensionMôû toaøn phaàn ngaên keùo tuû, taûi troïng 45 kg ................ 7.10
Single extensionMôû 3/4 hoäc ngaên keùo tuû ............................................. 7.6
Blum Standard Single ExtensionRay tieâu chuaån Blum môû 3/4 hoäc ngaên keùo tuû ............ 7.7
FF 7.3
7
Drawer RunnersHệ thống ray trượtContents / Nội d ung
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 5/22
Hašfele Functionality: The highest standards in design and functionTieâu chuaån toát nhaát trong moïi thieát keá vaø öùng duïng
Hašfele offers you a versatile drawer runner range, allowing you to configure drawers according to the individual needs.This standard of quality you have come to expect from Hašfele, can once again be found within our new and innovative extensive rangeof drawer runner applications and requirements.
Hašfele coù theå ñem ñeán cho baïn nhöõng loaïi ray tröôït ña naêng, cho pheùp baïn söû duïng chuùng theo töøng nhu caàu rieâng bieät.Nhöõng tieâu chuaån maø baïn ñaõ kyø voïng ôû Hašfele coù theå moät laàn nöõa ñöôïc tìm thaáy trong nhöõng loaïi ray hoäc tuû môùi cuûa chuùng toâi.
Roller RunnerSingle extension, load bearing capacityup to 20 kg
Ray baùnh xe keùo 3/4 hoäc tuû,taûi troïng 20 kg
Roller RunnerSingle extension, load bearing capacityup to 25 kg
Ray baùnh xe keùo 3/4 hoäc tuû,taûi troïng 25 kg
Blum Standard Runner,load bearing capacity up to 25 kg
Ray hoäc tuû Blum, taûi troïng 25 kg
Single extension, load bearing
capacity up to 10 kg
Ray bi 2 taàng keùo 3/4 hoäc tuûtaûi troïng 10 kg
Single extension
load bearing capacity up to 12 kg
Ray bi 2 taàng keùo 3/4 hoäc tuûtaûi troïng 12 kg
Full extension
load bearing capacity up to 30 kg
Ray bi 3 taàng môû toaøn phaàn taûi troïng 30 kg
Full extension
load bearing capacityup to 45 kg
Ray bi 3 taàng, môû toaøn phaàn taûi troïng 45 kg
FF 7.4
7
Drawer RunnersHệ thống ray trượtInformation / Thông tin
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 6/22
FF 7.5
7
Drawer RunnersHệ thống ray trượtInformation / Thông tin
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Full extension
load bearing capacity up to 160 kg
Soft and self closing mechanism
load bearing capacity up to 50 kg
Full extension
load bearing capacity up to 45 kg
Full extension
load bearing capacity up to 227 kg
Ball Bearing Runner - Single extensionload bearing capacity up to 25 kg
Two way travel runnerload bearing capacity up to 25 kg
Blum Tandem 550 H single extensionload bearing capacity up to 30 kg
Ray aâm Blum Tandem 550H, môû 3/4 Taûi troïng toái ña 30kg
Blum Tandem 560 H and 566 H, full extension-load bearing capacity up to 50 kg
Ray aâm Blum Tandem 560H vaø 566 H Môû toaøn phaànTaûi troïng toái ña 50kg
Tandem Tip-on forBlum Tandem drawer runners
Boä phaän Tip-on daønh chongaên keùo loaïi nhaán Blum Tandem
Phuï kieän cho loã khoan
Cabinet drilling jig
Keùo toaøn phaàn, taûi troïng 45 kg Cô caáu ñoùng giaûm chaán taûi troïng 50 kg
Ray bi 3 taàng môû toaøn phaàntaûi troïng 160 kg
Ray bi 3 taàng môû toaøn phaàn, taûi troïng 227 kg
Ray bi môû 3/4 hoäc ngaên keùo tuûû, taûi troïng 25
Keùo hai chieàu, taûi troïng 25 kg
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 7/22
Single extension, load bearing capacity up to 25 kgRay hoäc tuû môû 3/4, taûi troïng 25 kg
Single extension, load bearing capacity up to 20 kgRay hoäc tuû môû 3/4, taûi troïng 20 kg
Material: SteelGuided by: 4 friction bearing mounted nylon rollers
Thickness: 1.2 mmType of closing: Self closingFitting to side panel: Screw fixingFitting to drawer: Screw fixing surface mounted
Chaát kieäu: theùp Tröôït baèng 4 baùnh xe boïc nhöïa Ñoä daøy theùp: 1.2 mm Quy caùch ñoùng: ñoùng töï ñoäng Baét vaøo thaønh tuû: baèng vít Baét vaøo hoäc keùo: baèng vít
Nominal length LChieàu daøi L
Black,RAL 9017Maøu ñen
BrownMaøu naâu
CreamMaøu kem
White,RAL 9010Maøu traéng
250 mm – 423.37.125 423.37.425 423.37.725
300 mm 423.37.300 423.37.130 423.37.430 423.37.730
350mm 423.37.350 423.37.135 423.37.435 423.37.735
400 mm 423.37.400 423.37.140 423.37.440 423.37.740
450 mm 423.37.450 423.37.145 423.37.445 423.37.745
500 mm 423.37.500 423.37.150 423.37.450 423.37.750
550 mm 423.37.550 423.37.155 423.37.455 423.37.755
600 mm 423.37.600 – 423.37.460 423.37.760
Packing: 1 or 20 pairs.Tieâu chuaån ñoùng goùi: 1 hoaëc 20 caëp.
LengthChieàu daøi
WhiteTraéng
300 mm
350 mm
400 mm
450 mm
500 mm
423.31.730
423.31.735
423.31.740
423.31.745
423.31.750
Packing: 1 or 25 pairsTieâu chuaån ñoùng goùi: 1 hoaëc 25 caëp
Load Capacity 20 kg/pair - Chòu Taûi 20 kg/caëp
Material: SteelGuided by: 4 friction bearing mounted nylon rollersThickness: 1.0 mmType of closing: Self closingFitting to side panel: Screw fixingFitting to drawer: Screw fixing surface mounted
Chaát kieäu: theùp Tröôït baèng 4 baùnh xe boïc nhöïa Ñoä daøy theùp: 1.0 mm Quy caùch ñoùng: ñoùng töï ñoäng Baét vaøo thaønh tuû: baèng vít
Baét vaøo hoäc keùo: baèng vít
FF 7.6
7
Drawer RunnersHệ thống ray trượtRoller Runner / R ay bánh x e
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 8/22
FF 7.7
7
Drawer RunnersHệ thống ray trượtRoller Runner / R ay bánh x e
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Blum Standard Runner Single Extension, load bearing capacity up to 25 kg
Ray tieâu chuaån Blum môû 3/4 , taûi troïng 25 kg
Nominal length NL Cat. No
300 mm
350 mm400 mm
450 mm
500 mm
421.72.323
421.72.378
421.72.421
421.72.476
421.72.529
Cabinet and drawer profile left/right BLUMATIC self closing feature Epoxy coated, cream (RAL 9001) Lock-out stop One-side guided runner system
Ray bi tieâu chuaån: Heä thoáng töï ñoùng Blumatic Bi nhöïa baèng theùp phuû Epoxy Heä thoáng khoùa giuùp giöõ maët tröôùc hoäe keùo saùtvaøo thaønh tuû Ñöôøng daãn ôû moät beân ray giuùp ray tröôït eâm aùi
Chieàu saâu ngaên keùo baèng chieàu daøi ray tröôït + 3mm
Chieàu daøi
Min. internal cabinet depth = nominal length NL + 3 mm
300, 350
400
450
500
Nominal length NL (mm)
Chieàu daøi Maõ soá
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 9/22
FF 7.8
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Soft and self closing mechanism, load bearing capacity up to 50 kg
Cat. No.
Soft and self closing mechanism 432.13.503
•Area of application: Roller runners, ball bearing runners without
retainer rentention, groove mounted runners
•Material: Plastic
•Finish: Light grey and black
•Load bearing capacity: 25 kg with one-sided installation,
50 kg with two-sided installation
• Installation: On one or both sides, soft and self closing mechanism
for screw fixing to cabinet side panel, follower for screw fixing to
drawer side•Version: Can be retrofitted
Packing: 1 pc.
Installation for roller and ball bearing runners
Gap width S = 12 – 15 mm
without self closing mechanism : Y = 21 mm
with self closing mechanism: Y = 23 mm
Supllied with
1 Soft and self closing mechanism
1 Follower
1 Set of installation instructions
Order reference
The installation on one side or both sides is determined by the
installation situation (width, depth, running properties of the
runners).
Installation for groove mounted runners
Gap width S = 3 – 6 mm
Tested to 100,000 cycles and therefore exceedingDIN EN 15338, level 3
100,000 chu kì đạt chuẩnDIN EN 15338, cấp 3
•
•
•
•
•
•
Lắp đặt: R ay đơn, ray bi, ray lắp rãnh
Chất liệu: Nhựa
X ử lý bề mặt: X ám nhạt và đen
Tải trọng: 25 kg nếu lắp một bên và 50 kg nếu lắp hai bên
Lắp đặt: Cho một hoặc hai bên, lắp cơ cấu bằng vít trực tiếp
vào vách tủ
Phiên bản: Có thể kết hợp
Cung c ấ p v ớ i
1 cơ cấu giảm chấn
1 bas chặn
1 hướng dẫn lắp đặt Khoảng hở S = 12 - 15 mm
Không có cơ cấu: Y =21 mm
Có cơ cấu: Y = 23mm
Khoảng hở S = 3 - 6 mm
Lắp cho ray lắp rãnh
Lắp cho ray đơn và ray bi
Thông tin đ ặt hàng
Lắp một hoặc hai bên tùy thuộc vào thực tế lắp đặt
Cơ cấu đóng giảm chấn
Tiêu chuẩn đóng gói: 1 cái
Cơ c ấ u đ óng giảm chấ n, tải tr ọng 5 0 kg
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 10/22
FF 7.9
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Single extension, load bearing capacity up to 10 kgRay bi 2 taàng keùo 3/4 ngaên keùo tuû, taûi troïng 10 kg
InstallationHöôùng daãn laép ñaët
Drilling dimensionsKích thöôùc khoan
Carcase rail LChieàu daøi ray L
Extension loss AVChieàu daøi maát AV
Cat. No.Maõ soá
300 mm 82 mm 432.36.930
350 mm400 mm
450 mm
500 mm
550 mm
432.36.935432.36.940
432.36.945
432.36.950
432.36.955
Single extension, load bearing capacity up to 12 kgRay bi 2 taàng keùo 3/4 ngaên keùo tuû, taûi troïng 12 kg
Carcase rail LChieàu daøi ray L
Extension loss AVChieàu daøi maát AV
Cat. No.Maõ soá
246 mm 71 mm 423.35.924310 mm 74 mm 423.35.931
Secure guide rail in drawer grooveusing an M4 threaded screw.
Söû duïng vít xoaén M4 ñeå baûo ñaûm
ray ñònh vò trong raõnh hoäc keùo
Material: Steel
Finish: GalvanizedGuided by: 2 Ball cagesThickness: 1.0 mmFitting to side panel: Screw fixingFitting to drawer: Screw fixing, fitting in grooves
Chaát lieäu: theùp Xöû lyù beà maët: maï keõm Tröôït baèng 2 haøng bi Ñoä daøy theùp: 1 mm Baét vaøo thaønh tuû: baèng vít Baét vaøo hoäc keùo: baèng vít, ngay ñöôøng raõnh hoäc
Material: SteelFinish: Galvanized
Guided by: 2 Ball cagesDrawer width: Max. internal carcase width -20 mmInstallation: Screw fixing to side panel
Chaát lieäu: theùp Xöû lyù beà maët: maï keõm Tröôït baèng 2 haøng bi Chieàu roäng hoäc keùo baèng chieàu roäng hoäc tuû -20 mm Laép ñaët: baét vít vaøo thaønh tuû
Packing: 1 or 50 pairs.Tieâu chuaån ñoùng goùi: 1 hoaëc 50 caëp.
Packing: 1 or 10 pairs.Tieâu chuaån ñoùng goùi: 1 hoaëc 10 caëp.
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 11/22
FF 7.10
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Full extension, load bearing capacity up to 45 kg
Installation
Note
When used in combination with inset fronts, the runners must be
set back further into the cabinet by 3.2 mm + front thickness.
The drawer width should not exceed the installation length.
Bracket fitted to rear panel
Function chart
!
"
§
Drilling pattern
Cabinet front edge
Drawer opens and close always 100% meaning that the goods
are presented in the best way, no power supply required
! Close
" Open
§ Neutral zon
Môû toaøn phaàn, taûi troïng 45 kg
Lắp đ ặt
K hả năng
Quy cách khoan
Chú ý Hộc tủ đóng mở 100% mà không cần lực
Cạnh trước của thành tủ
Bas lắp mặt sau tủ
Khi kết hợp với tủ lọt lòng, ray phải được lắp thục vào trong 1
khoảng 3.2 mm cộng với độ dày mặt tủ
Chiều rộng hộc tủ không được vượt quá chiều dài hộc tủ
Installationlength L mm
Min. dim. Amm
Dim. Bmm
Extensionlength ALmm
Cat. No.
300 254 198 305 432.41.931
350 356 432.41.936
400 406 432.41.941
450 305 249 457 432.41.946
500 508 432.41.951
550 559 432.41.956
600 356 300 610 432.41.961
650 660 432.41.966
700 711 432.41.971
Packing: 1 pair
Quy cáchlắp đặt L
Kích thước tối thiểu A Khoản mở
rộng AL
Mã sốKíchthước B
Tiêu chuẩn đóng gói: 1 cặp
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 12/22
FF 7.11
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
•Area of application: For luggage racks in hotels, for displaying
goods
•Material: Steel runners and brackets, plastic spring mechanism
•Finish/Colour: Runners and brackets galvanized,
spring mechanism black lacquered
•Bearing: Ball cages
•Version: The spring mechanism beneath the drawer assists
opening and closing, there is a neutral zone at the half-way
point, if the drawer is opened/closed beyond this zone, it is
automatically opened/closed the rest of the way (100 %) by the
spring mechanism, the spring mechanism also holds the drawer
out and in respectively in the open and closed positions, no power
supply is required, the drawer can be inserted/removed quickly
using a release lever
•Height adjustment: ±1.6 mm for adjusting drawer front
•Temperature: +10 to +40 C
•Max. drawer width: Internal cabinet width – 25.4 mm
• Installation: Runners: At drawer side, mounting brackets can beused for base mounted installation
• Installation spring mechanism: Brackets are pre-mounted on
runners - screw brackets to drawer rear panel and clip spring into
both brackets
Lắp đặt: Cho kệ để hành lý của khách sạn
Chất liệu: R ay và bas mạ kẽm, cơ cấu màu đen
Bi: Hàng bi
Phiên bản: Cơ cấu lò xo bên dưới hộc tủ giúp đóng mở
nhẹ nhàng. Có một khoản trung tâm để đóng mở tự
động.Nếu hộc tủ được kéo ra khỏi khoản này, cơ cấu sẽtự động kéo và đẩy hộc tủ vào hoặc ra hoàn toàn, không
cần dùng lực
Điều chỉnh chiều cao: + 16 mm ở mặt trước
Nhiệt độ: +10 đến +40 C
Chiều rộng hộc tủ tối đa: Lọt lòng tủ -25.4 mm
Lắp đặt: R ay lắp vào hộc tủ, bas đỡ lắp dưới hộc tủ
Lắp đặt cho cơ cấu: Bas bắt vào ray, bas đỡ lắp vào
vách sau hộc tủ và cơ cấu lò xo lắp vào 2 bas
•
•
•
•
•
•
•
•
•
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 13/22
FF 7.12
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Full extension, load bearing capacity up to 45 kg
Ray bi 3 taàng môû toaøn phaàn, taûi troïng 45 kg
12.7
4 5 .
7
AL L
Installation
Höôùng daãn laép ñaët
Disengaging
Caùch thaùo ray
Disengage by operating the releaselever in the drawer rail.Thaùo ray ra baèng caùch gaït choát khoùa beân trong ray
Load bearing capacity
Load bearing capacity refer to rail length 450 mm andextension width 450 mm.
Taûi troïng Taûi troïng coù lieân quan ñeán chieàu daøi ray 450 mm vaøchieàu daøi nôùi roäng 450 mm
Material: SteelFinish: Galvanized or black galvanizedGuided by: 2 Ball cagesVersion: Can be disengaged using release lever, with stay closed
feature for holding in closed positionTemperature range: -20 to +80OCFitting to side panel: Screwing into 32 mm series drilled holesFitting to drawer: Screw fixing, lateral installation
Chaát lieäu: theùp Xöû lyù beà maët: maï keõm maøu traéng hoaëc ñenTröôït baèng 2 haøng biPhieân baûn: coù theå thaùo ra nhôø coù choát khoùa coù baùs giöõ ôû vò trí ñoùng Nhieät ñoä baûo quaûn: -20 to +80 0 CBaét vaøo thanh tuû: baèng vít theo quy taéc loã khoan 32 mmBaét vaøo hoäc keùo: baèng vít vaøo beân thaønh hoäc keùo
Load Capacity 45 kg/pair - Chòu Taûi 45 kg/boäHeight - Cao: 45 mm, Side Mounted - Laép ñaët 2 beân thaønh tuû
Packing: 1 or 20 pairs .Tieâu chuaån ñoùng goùi: 1 hoaëc 20 caëp.
Installation length LChieàu daøi laép ñaët
GalvanizedMaï keõm
Black ZincMaï keõm ñen
250 mm 250 mm
300 mm 300 mm
350mm 350 mm
400 mm 400 mm
450 mm 450 mm
500 mm 500 mm
550 mm 550 mm
600 mm 600 mm
Extension length ALChieàu daøi nôùi roäng
422.82.925
422.82.930
422.82.935
422.82.940
422.82.945
422.82.950
422.82.955
422.82.960
422.82.326
422.82.331
422.82.336
422.82.341
422.82.346
422.82.351
422.82.356
422.82.361
Drilling dimension
Kích thöôùc khoan Front edge of carcaseCaïnh tröôùc hoäc tuû
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 14/22
FF 7.13
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Full extension, load bearing capacity up to 45 kgRay bi 3 taàng môû toaøn phaàn, taûi troïng 45 kg
InstallationHöôùng daãn laép ñaët
Drilling dimensionKích thöôùc khoan
Installation length LChieàu daøi laép ñaët L
Extension length ALChieàu daøi nôùi roäng AL
Cat. No.Maõ soá
250 mm 243 mm 422.41.825
300 mm 305 mm 422.41.830
350mm 356 mm 422.41.835
400 mm 406 mm 422.41.840
450 mm 457 mm 422.41.845
500 mm 508 mm 422.41.850
Material: SteelFinish: Special galvanized treatmentGuided by: 2 Ball cagesFeatures: Can be disengaged using release lever, hold-in deviceinclosed position, corrosion resistant, resistance 8 times higher-compared with standard galvanized treatmentHeight adjustment: ±1.6 mmTemperature: -20 to +80oCDrawer width: Max. internal carcase width -25.4 mm
Chaát lieäu: theùpXöû lyù beà maët: maï ñaëc bieät choáng ræ seùt Tröôït baèng 2 haøng bi Ñaëc bieät: coù theå thaùo ra nhôø coù choát khoùa, baùs giöõ ôû vò trí ñoùng,
choáng ræ seùt gaáp 8 laàn so vôùi maï keõm thoâng thöôøngÑieàu chænh ñoä cao: ±1.6 mmNhieät ñoä: -20 to +80 o CChieàu roäng hoäc keùo baèng chieàu roäng loït loøng tuû -25.4 mm
Packing: 1 pair.
Tieâu chuaån ñoùng goùi: 1 caëp.
Front edge of carcaseCaïnh tröôùc hoäc tuû
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 15/22
FF 7.14
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Full extension, load bearing capacity up to 160 kgRay bi 3 taàng môû toaøn phaàn, taûi troïng 160 kg
Drilling dimensionKích thöôùc khoan
InstallationHöôùng daãn laép ñaët
Material: SteelFinish: Galvanized
Guided by: 2 Ball cagesVersion: With stay closed feature for holding in closed positionTemperature range: -20 to +80oCFitting to side panel: Screwing in 32 mm series drilled holesFitting to drawer: Screw fixing, lateral or horizontal installationSupplied with: Installation instructions
Chaát lieäu: theùpXöû lyù beà maët: maï keõm Tröôït baèng 2 haøng bi Phieân baûn: Nhieät ñoä: -20 to +80 o CBaét thanh vaøo tuû: baét vít theo qui taéc loã khoan 32 mm Baét vaøo hoäc keùo: baèng vít, laép beân caïnh hoaëc naèm ngang
Load bearing capacityChòu taûi
300 mm 323.5 mm 120 kg 422.22.300
350 mm 373.5 mm 130 kg 422.22.355
400 mm 423.5 mm 140 kg 422.22.408
450 mm 473.5 mm 150 kg 422.22.453
500 mm 523.5 mm 160 kg 422.22.506
550 mm 573.5 mm 150 kg 422.22.551
600 mm 623.5 mm 130 kg 422.22.604
700 mm 723.5 mm 110 kg 422.22.702
790 mm 803.5 mm 100 kg 422.22.800
900 mm 923.5 mm 80 kg1,000 mm 1,023.5 mm 70 kg
1,100 mm 1,123.5 mm 60 kg
422.22.900422.22.910
422.22.911
Installation length LChieàu daøi laép ñaët L
Extension length ALChieàu daøi nôùi roäng AL
Cat. No.Maõ soá
Packing: 1 pair.Tieâu chuaån ñoùng goùi: 1 caëp.
Front edge of carcaseCaïnh tröôùc hoäc tuû
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 16/22
FF 7.15
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Full extension, load bearing capacity up to 227 kgRay bi 3 taàng môû toaøn phaàn, taûi troïng 227 kg
Mounting possibilities with mounting bracket
Vôùi khung moùc
Bottom mounted
Ñaùy khung
InstallationHöôùng daãn laép ñaët
Material: SteelFinish: Galvanized
Guided by: 4 Ball cagesTemperature: -20 to +80oCDrawer width: Max. internal carcase width -38.2 mmInstallation: Screw fixing, can be used for side or bottom mountedNot situable for working stages with access persons.
Chaát lieäu: theùpXöû lyù beà maët: maï keõm Tröôït baèng 2 haøng bi Chieàu roäng hoäc keùo baèng chieàu roäng loït loøng tuû - 38.2 mm Nhieät ñoä: -20 ñeán +80 o C Caùch laép ñaët: baét vít vöøa vaën, coù theå söû duïng maët hoaëc ñaùy khung
Side mountedMaët khung
DrawersHoäc keùo Neàn Ñoùng ngaên
ShelvesPlatforms
Order reference
Please order mounting braket seperately.
Yeâu caàu
Vui loøng yeâu caàu baùs ñôõ rieâng bieät
305 mm 305 mm 227 kg 422.10.830407 mm 407 mm 227 kg 422.10.840
508 mm 508 mm 227 kg 422.10.850
610 mm 610 mm 227 kg 422.10.860
711 mm 711 mm 227 kg 422.10.870
813 mm 813 mm 218 kg 422.10.880
914 mm 914 mm 209 kg 422.10.890
1,016 mm 1,016 mm 200 kg 422.10.894
1,219 mm 1,219 mm 182 kg 422.10.896
1,524 mm 1,524 mm 154 kg 422.10.898
Load bearing capacityChòu taûi
Installation length LChieàu daøi laép ñaët L
Extension length ALChieàu daøi nôùi roäng AL
Cat. No.Maõ soá
Packing: 1 pair.Tieâu chuaån ñoùng goùi: 1 caëp.
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 17/22
FF 7.16
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Single extension, load bearing capacity up to 25 kgRay bi cho baøn phím maùy tính môû 3/4 hoäc ngaên keùo, taûi troïng 25 kg
Installation length LChieàu daøi laép ñaët L
Extension length AL
Chieàu daøi nôùi roäng ALExtension loss AVChieàu daøi maát AV
Cat. No.Maõ soá
350 mm 270 mm 88 mm 420.34.935
InstallationHöôùng daãn laép ñaët
InstallationHöôùng daãn laép ñaët
410 mm 295 mm 115 mm 420.34.941
Area of application: For shelves and keyboardsMaterial: SteelFinish: GalvanizedGuided by: 2 Ball cagesVersion: With stay closed feature and locking at both sidesFitting to table top: Screw fixingFitting to shelf: Screw fixing beneath the shelfMounting bracket: Height adjustment by 7 drillings (54 – 99 mm)Can be mounted inwards or outwards
Nôi laép ñaët: cho keä & baøn phím maùy tính Chaát lieäu: theùp Xöû lyù beà maët: maï keõm tröôït baèng 2 haøng bi Phieân baûn: coù tay & baùs khoùa caû 2 beân Baét vaøo maët baøn: baèng vít
Baét vaøo keä: baèng vít beân döôùi keäBaùs baét ray: ñieàu chænh ñoä cao khoaûng 54-99 mm nhôø coù 7 loã khoan saün
Area of application: For shelves and keyboardsMaterial: SteelFinish: GalvanizedVersion: With stay closed feature for holding in closed positionFitting to table top: Screw fixing beneath table topFitting to shelf: Screw fixing beneath shelfMounting bracket: Fixed
Phieân baûn: coù tay giöõ ñònh vò Nôi laép ñaët: cho keä & baøn phím maùy tính Chaát lieäu: theùp Xöû lyù beà maët: maï keõm Baét vaøo maët baøn: baèng vít Baét vaøo keä: baèng vít beân döôùi keäBaùs baét ray: chuaån
Packing: 1 or 10 pairs.Tieâu chuaån ñoùng goùi: 1 hoaëc 10 caëp.
Packing: 1 or 10 pairs.Tieâu chuaån ñoùng goùi: 1 hoaëc 10 caëp.
Installation length LChieàu daøi laép ñaët L
Extension length AL
Chieàu daøi nôùi roäng ALExtension loss AVChieàu daøi AV
Cat. No.Maõ soá
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 18/22
FF 7.17
7
Drawer RunnersHệ thống ray trượtBall Bearing Runner / R ay bi
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
•Area of application: For two-sided access to drawers in furniture
and bars, for overlay fronts
•Material: Steel drawer sides, cabinet rails and front connection
brackets, plastic covers and soft-closing mechanism•Finish/Colour: Cabinet rails and front connection brackets
galvanized, drawer sides and covers silver coloured, soft-closing
mechanism light grey
•Version: With integrated soft close
•
•
•
•
•
•
Max. drawer width: Internal cabinet width – 77 (see table) mm
Installation
Installation length Lmm
Dim. Ymm
For internalcabinet width LB mm
Cat. No.
400–479 101 450–600 432.19.940
480–559 190 450–680 432.19.948
560–639 270 450–760 432.19.956
640–719 350 450–840 432.19.964
720–800 430 450–920 432.19.972
Packing: 1 set
Installation dimensions
Drawer base size calculation:
Drawer base width SB = LB – 77 mm
Drawer base length ST = L + (2 x C) – 2 mm
Drawer height SH = LH – 23 mm
LB = Internal cabinet width
LH = Internal installation height
(111–240 mm)
L = Installation length
C = Buffer height (0.5–3 mm)
Drawer front size calculation
Front width FB = LB = (2 x SA)
Front height FH = LH + OA + UA
Front thickness = FD
Drilling dimensions
BH = UA + 50 mm
Z = SA + 25 mm
Drilling dimensions for cabinetX = (L - Y - 192 mm)/2
Full extension with 2 way travel
Suppleid including side panel and soft close
Ray môû hai chieàu, taûi troïng leân ñeán 25 kg
Lắp đặt: Hộc tủ mở hai chiều cho đồ nội thất, quầy bar, cho
cửa lắp trùm
Chất liệu: Vách ray, hộc tủ, bas nối bằng thép, nắp đậy bằng
nhựa, có giảm chấn
X ử lý bề mặt: Hộc tủ và bas nối mạ kẽm, vách tủ và nắp đậy
màu bạc, giảm chấn màu xám
Phiên bản: Có tích hợp giảm chấn
Chiều rộng tối đa hộc tủ: Lọt lòng tủ -77mm
Kéo 2 chiều toàn phầnCung cấp trọn bộ gồm thành hộc và cơ cấu giảm chấn
Quy cách khoan cho tủ X = (L - Y - 192 mm)/2
Quy cách khoanBH = U A + 50 mmZ = S A + 25 mm
LB = chiều rộng lọt lòng tủ
LH = chiều cao lắp đặt
(111-240 mm)L = chiều dài lắp đặt
C = khoản hở (0.5-3 mm)
Công thức tính kích thước hộc tủ:
Đáy hộc tủ S B = LB - 77 mm
Chiều dài hộc tủ S T = L + (2 x C) - 2 mm
Chiều cao hộc tủ S H = LH - 23 mm
Công thức tính mặt hộc tủ:Chiều rộng FB = LB = (2 x S A)
Chiều cao FH = LH + OA + U A
Độ dày = FD
Lắp đ ặt
Kỹ thuật lắp đ ặt
Chiều dài L
Mã số
Chiều rộng lọt lòng tủ Chiều
thước Y
Tiêu chuẩn đóng gói: 1 bộ
Two way travel runner, load bearing capacity up to 25 kg
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 19/22
FF 7.18
7
Drawer RunnersHệ thống ray trượtConcealed runner / R ay âm
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Blum Tandem 550 H, single extensionRay aâm Blum Tandem 550H, môû 3/4 Load bearing capacity up to 30 kgTaûi troïng toái ña 30kg
InstallationLaép ñaët
Khoaûng caùch maët tuû tröôùc
Drilling pattern
Note
Min. installation lengthwith front drawers + 3 mm,with internal drawers + 21 mm
Packing: 1 Pair
Nominallength Lmm
Drawerlength SL mm
Extension loss AV mm WithoutintegratedBlumotion
270 260 54 423.53.275
300 290 54 423.53.300
350 340 54 423.53.355
400 390 74 423.53.408
450 440 74 423.53.453
500 490 96 423.53.506
550 540 96 423.53.551
600 590 139 423.53.604
Packing: 1 Pair
Nominallength Lmm
Drawerlength SL mm
Extension loss AV mm WithintegratedBlumotion
270 260 54 423.53.727
300 290 54 423.53.730
350 340 54 423.53.735
400 390 74 423.53.740
450 440 74 423.53.745
500 490 96 423.53.750
550 540 96 423.53.755
600 590 139 -
Locking device
Order separetely
Right/Phaûi 423.53.080
Left/Traùi 423.53.090
7
Runner Locking device
• Material: Steel• Finish:• Guided by: Roller bearing, power transmission via
two running gears• Version: With and without integrated Blumotion
• Tolerance specification: Width ±1.5 mm, depth ±2 mm• Adjusting facility:• Type of closing:• max. drawer width: Internal cabinet width – 10 mm• Installation: At drawer, base mounted
• Version without Blumotion, su
locking device
mechanism
Chaát lieäu: Theùp Xöû lyù beà maët: Maï keõm Boä phaän tröôït: Baùnh xe, truyeàn ñoäng baèng
baùnh xe Phieân baûn: Coù vaø khoâng coù cô caáu giaûm
chaán Blumotion Dung sai: ± 1,5 mm, ± 2 mm chieàu saâu Ñieàu chænh chieàu cao: + 3 mm baèng baùt khoùa Quy caùch ñoùng: cô caáu töï ñoùng Blumotion Chieàu roäng toái ña hoäc tuû: Chieàu roäng loït loøng tuû - 10mm Laép ñaët: Laép vaøo beân döôùi hoäc tuûPhieân baûn khoâng coù giaûm chaán Blumotion, thích hôïp vôùi cô caáumôû roäng Tip-on
Chieàu daøi
Ñaët haøng rieâng
Ray
Tieâu chuaån ñoùng goùi: 1 caëp Tieâu chuaån ñoùng goùi: 1 caëp
Baùt khoùa
Quy caùch khoan
Löu yù: Chieàu daøi laép ñaët toái thieåu: Cho hoäc tuû truøm + 3 mm Cho hoäc tuû loït + 21 mm
Meùp tröôùc cuûa tuûBaùt khoùa
Chieàu daøi hoäc tuû Khoâng coù
giaûm chaán Blumoton
Chieàu daøi bò maát
Chieàu daøi Chieàu daøi hoäc tuû Coù
giaûm chaán Blumoton
Chieàu daøi bò maát
Packing: 1 piece
Tieâu chuaån ñoùng goùi: 1 caùi
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 20/22
FF 7.19
7
Drawer RunnersHệ thống ray trượtConcealed runner / R ay âm
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
DrawerRunnersDrawerRunnersConcealed runners – gentleclosingPrices · Availability· OrderingPlanning and Construction
Blum Tandem 560 H and 566 H, full extension
Load bearing capacit y up to 50 kg• Material: Steel• Finish:• Guided by:
running gear• Tolerance specification: Width ±1.5 mm, depth ±2 mm• Adjusting facility:
adjust tilting angle of front panel atdrawer rail
• Type of closing:• max. drawer width: Internal cabinet width – 10 mm• Installation: At drawer, base mounted
• Version without Blumotion and load bearing capacity 30 kg,
Installation
Packing: 1 piece
Runner
7
Adjusting facilityFront panel tilting angle
Locking Device
300 290 423.54.730
350 340 423.54.735400 390 423.54.740450 440 423.54.745
500 490 423.54.750
550 540 423.54.755
450 440 423.59.745
500 490 423.59.750
550 540 423.59.755
600 590 423.59.760
Packing: 1 set
Nominal length Lmm Drawer length SLmm With integratedBlumotion
Tandem 560 H, load bearing capacity 30 kg
Tandem 566 H, load bearing capacity 50 kg
Locking device
Order separetely
423.53.080
423.53.090
Ray aâm Blum Tandem 560H vaø 566 H, môû toaøn phaàn
Taûi troïng toái ña 50kg
Tandem 560H, taûi troïng 30 kg
Tandem 566H, taûi troïng 50 kg
Laép ñaët
Right/Phaûi
Left/Traùi
Chaát lieäu: Theùp Xöû lyù beà maët: Maï keõm Boä phaän tröôït: Baùnh xe Phieân baûn: Coù vaø khoâng coù cô caáu giaûm
chaán Blumotion Dung sai: ± 1,5 mm chieàu roäng, ± 2 mm chieàu saâu
Ñieàu chænh chieàu cao: + 3 mm taïi choã noái, ñieàu chænh ñoänghieâng cho maët tröôùc treân thanh ray
Quy caùch ñoùng: cô caáu töï ñoùng (Blumatic)Chieàu roäng toái ña hoäc tuû: Chieàu roäng loït loøng tuû - 10mm Laép ñaët: Laép vaøo beân döôùi hoäc tuûPhieân baûn khoâng coù giaûm chaán Blumotion, taûi troïng 30 kg thíchhôïp vôùi cô caáu môû roäng Tip-on
Ñaët haøng rieâng
Ray
Tieâu chuaån ñoùng goùi: 1 caùi
Tieâu chuaån ñoùng goùi: 1 boä
Baùt khoùa
Baùt khoùa
Packing: 1 set
300 290 423.54.307
350 340 423.54.352400 390 423.54.405450 440 423.54.450500 490 423.54.503
550 540 423.54.558
450 440 423.59.945
500 490 423.59.950
550 540 423.59.955
600 590 423.59.960
Nominal length Lmm Drawer length SLmm Without integrated
Blumotion
Tandem 560 H, load bearing capacity 30 kg
Tandem 566 H, load bearing capacity 50 kg
Tandem 560H, taûi troïng 30 kg
Tandem 566H, taûi troïng 50 kg
Chieàu daøi
Tieâu chuaån ñoùng goùi: 1 boä
Chieàu daøi hoäc tuûKhoâng coùgiaûm chaán Blumoton
Chieàu daøi Chieàu daøi hoäc tuûCoùgiaûm chaán Blumoton
Ñieàu chænh ñoä nghieâng maët tröôùc hoäc tuû
Löu yù: Chieàu daøi laép ñaët toái thieåu: Cho hoäc tuû truøm + 3 mm Cho hoäc tuû loït + 21 mm
Notemin. installation length with front
drawers + 3 mm, with internal
drawers + 21 mm
Drilling patternQuy caùch khoan
Meùp tröôùc cuûa tuû
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 21/22
FF 7.20
7
Drawer RunnersHệ thống ray trượt A ccessories / Phụ kiện
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
New products and s y stems: www.hafele.comSản phẩm mới và hệ thống: www.haf ele.com
Tandem Tip-on for Blum Tandem drawer runnersBoä phaän Tip-on daønh cho ngaên keùo loaïi nhaán Blum Tandem
Depth adjustment
Ñieàu chænh ñoä saâu
Môû 3/4
Tieâu chuaån ñoùng goùi: 1 boä
Môû toaøn phaàn
• Area ofapplication:
For opening front panels without handles byapplying slight pressure to the panel,suitable for all Tandem drmotion, load bearing capacity 30 kg
• Version: For clipping onto drawer runners, without tools• Release distance: 2.2 mm
• TIP-ON synchronisation set (for drawer width 600 - 1200 mm)
Single extension Full extension
Note
Additional space requirement 1 mm in height.
Löu yùKhoaûng troáng theâm 1 mm chieàu cao
1 .
0
2 3 .
5
3 3
7
21
106
1 .
0
2 8 .
5
3 8
7
21
106
Packing: 1 set
Suitable for Cat. No.
Single extension 423.53.060
Full extension 423.54.060
Boä phaän Tip-on daønh cho ray TANDEM TIP-ON for TANDEM
Taùc duïng: Duøng ñeå môû hoäc tuû khoâng söû duïng tay naém, chæcaàn taïo 1 aùp löïc nheï leân maët hoäc tuû, thích hôïp cho taát caû rayTandem khoâng söû duïng giaûm chaán Blumotion, taûi troïng 30 kg.Phieân baûn: caøi vaøo ray tuû, khoâng caàn duïng cuï.Khoaûng caùch ñeå môû: 2,2 mm
Thích hôïp
Môû 3/4
Môû toaøn phaàn
Thanh ñoàng boä cho TIP-ON (söû duïng cho hoäc tuû coù chieàu roäng 600 - 1200 mm
Maõ soá
Description Cat. No.
Synchronisation rod (1 pc) 423.53.066
423.53.067
Moâ taû
1 thanh ñoàng boä
Synchronisation pinion (2 pcs)2 baùnh xe cho thanh ñoàng boä
Maõ soá
Optional
Optional
Panel adjusting fitting
Phuï kieän ñieàu chænh maët tröôùc tuû
ColourMaøu saéc
Cat. No.Maõ soá
WhiteMaøu traéng
039.60.709
Recessed sleeveBaùs aâm
Adjustment elementPhuï kieän ñieàu chænh
Area of application: For 2-dimensional panel adjustmentMaterial: PlasticAdjusting range: ±2 mm horizontal, ±2 mm vertical
Vò trí laép ñaët: cho maët tröôùc ñieàu chænh 2 höôùng Chaát lieäu: nhöïa Phaïm vi ñieàu chænh: ±2 mm theo phöông ngang, ±2 mm theo phöôngthaúng ñöùng
Packing: 1 or 100 pcs.Tieâu chuaån ñoùng goùi: 1 hoaëc 100 caùi.
Supplied with1 Recessed sleeve1 Adjusting element
Cung caáp troïn boä goàm 1 baùs aâm1 Phuï kieän ñieàu chænh
7/25/2019 Drawer Runners
http://slidepdf.com/reader/full/drawer-runners 22/22
7
Drawer RunnersHệ thống ray trượt A ccessories / Phụ kiện
W e r e s e r v e t h
e r i g h t t o a l t e r s p e c i f i c a t i o n s w i t h o u t n o t i c e ( H V N F
u r n i t u r e F i t t i n g s 2 0 1 3 ) .
K í c h t h ư ớ c
v à m à u s ắ c s ả n p h ẩ m
c ó t h ể t h a y đ ổ i m à k h ô n g c ầ n b á o t r ư ớ c .
Lever type drawer stopBaùs chaän hoäc tuû
InstallationHöôùng daãn caøi ñaët
ColourMaøu saéc
Cat. No.Maõ soá
NaturalMaøu töï nhieân
BrightMaøu saùng
OrangeCam
430.09.150Extension directionChieàu môû hoäc tuû
Material: PlasticInstallation: Press fitting
Chaát lieäu: nhöïa Caøi ñaët: aán vaøo
Phuï kieän cho loã khoan
Tieâu chuaån ñoùng goùi: 1 caùi
Cabinet drilling jig
Blum T 65.5050
Packing: 1 piece
• Area of
application:
For drilling the system holes, with edgedistance 28 or 37 mm, up to 224 mm
• Material: Aluminium• Finish: Bright
• Version: With hardened inserts• Drill bit diameter: 2.5 mm
Cat. No.
423.53.033
Cho ray Blum T 65.5050
Taùc duïng: Ñeå khoan heä thoáng loã caùch meùp goã 28 hoaëc37 mm, cho ñeán 224 mm
Chaát lieäu : Nhoâm Xöû lyù beà maët: Maøu saùng Phieân baûn: Phaàn beân trong cöùng Ñöôøng kính muõi khoan: 2,5 mm
Maõ soá
Duïng cuï ño loã khoan treân hoäc tuû
Tieâu chuaån ñoùng goùi: 1 caùi
Drawer adjusting fitting
Blum T 65.1000.02Cho ray Blum T 65.1000.02
Laép ñaët
Gaén vaøo vò trí cuûa khôùp noái Ñònh vò trí moùc cuûa ray hoäc tuû
Application
• Area ofapplication:
For drilling hook positions for the drawer rail,for pilot drilling of the fixicoupling
• Material: Plastic• Colour: Orange• Version: With hardened inserts
couplingHook position of the drawer rail
Packing: 1 piece
Cat. No.
423.53.006
Taùc duïng: Ñònh vò trí moùc cuûa ray tuû baèng caùch gaén vaøo vòtrí cuûa khôùp noái vaø khoan
Chaát lieäu : Nhöïa Maøu: Cam Phieân baûn: Phaàn beân trong cöùng
Maõ soá ColourMaøu saéc
ColourMaøu saéc