ad-1 auto scanner
DESCRIPTION
Features. Configuration. Software. Diagnose. FAQ. AD-1 Auto Scanner. Features. 1.Universal. 2.Wireless. 3. Remote diagnosing. Home. Features. - PowerPoint PPT PresentationTRANSCRIPT
AD-1 Auto Scanner AD-1 Auto Scanner
Configuration Software Diagnose FAQFeatures
Features Features
Home
1.Universal
2.Wireless
3.Remote diagnosing
Features Features
4.Platform: Operates on either XP or Vista operating systems.5. Interface: USB "plug-and-play" technology and high baud transceiver for faster data transfer.6. Report: Results can be saved and printed for later reference.7. Upgrading: Software can be upgraded anywhere via internet. 8. Hardware: Anti-shock rubber guards for stronger, more durable usage.…
Home
Configuration Configuration
AD-1 Multiplexer Transceiver
Main Cable USB Line
Battery Clips Ignition Lighter Cable Adaptor Storage Case
Home
Software Download Software Download
Download Page: http://www.autoobd.net/english/download/download.asp
AD-1 Client Software
AD-1 USB Driver
Home
Software Setup Software Setup
Install the AD-1 client software.
Home
Main Interface Main Interface
If use the software at first time, please click the SETTING buttonand set COM port..
Home
Check COM Port Check COM Port
Check the CP210XUSB COM port fromDevice Manager.
And then set the same com port in the AD-1 software as above.
Home
Wireless Connection Wireless Connection
Wireless communication can reach from 20 to 50 meters.
Home
Connection with wire Connection with wire
You may operate the device based on any laptop or desktop. The diagnostic connectors would be different due to the vary vehicle.
Home
Diagnose Diagnose
Select the model of the car you want to diagnose ( JAPAN – TOYOTA )
Home
Select Connector type [ OBDII-16A ]
Diagnose Diagnose
Home
Diagnose Diagnose
Select the system ( ENGINE )
Home
Diagnose Diagnose
DIAGNOSE ITEM: Diagnostic Trouble Codes Information;Data Stream List;Active Test.
Home
Diagnose Diagnose
Test result: No fault code
Home
Diagnose Diagnose
Data stream list(Simulation Testing result )
Home
Diagnose Diagnose
Read ECU Memory(Audi/VW Testing result )
Home
FAQ FAQ
What can we do if the system still in wait state?
Home
FAQ FAQ
Click RESET back to initial state.
Home
FAQ FAQ
It is due to the software com port setting failed. Go back to thesoftware main page, click button “ SETTING”, and then selectthe correct com port. ( You may refer to the USB driver installation in this manual). If still same problem, re-plug the USB line and try it again.
Home