acousti-seal 900 series technical data - 931 technical data 10 22 26 (10650) operable partitions...
TRANSCRIPT
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 1
• Highly Flexible Single Panel System
• Single Panels Allow Multiple Room Setups, Changes in Pass Door and Work Surface Locations, and Remote Panel Storage
• Panel Moves Independently into Position
• Ideal for Applications Requiring Especially Tall Panels
• Suspension System Incorporates the Easy to Operate Smart Track™ Technology
• Smart Track Technology Makes Panel Storage Virtually Foolproof
• Right Angle Turn Layouts Available
• Used in Multipurpose Rooms, Exhibition Halls, and Commercial Buidings
Modernfold Model Acousti-Seal 931 Flat Panels, Individual Operation
This specification along with product information and model details can be downloaded from www.modernfold.comSPECIFICATION - SECTION 10 22 26 (10650) OPERABLE PARTITIONS
PART 1 – GENERAL 1.1 RELATED DOCUMENTSA. Drawings and general provisions of the Contract including
General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
1.2 SUMMARYA. This Section includes the following: 1. Manually operated, individual panel operable
partitions.B. Related Sections include the following: 1. Division 03 Sections for concrete tolerances required. 2. Division 05 Sections for primary structural support,
including pre-punching of support members by structural steel supplier per operable partition supplier’s template.
3. Division 06 Sections for wood framing and supports, and all blocking at head and jambs as required.
4. Division 09 Sections for wall and ceiling framing at head and jambs.
1.3 QUALITY ASSURANCEA. Installer Qualifications: An experienced installer who
is certified by the operable partition manu facturer, as qualified to install the manufacturer’s partition systems for work similar in material, design, and extent to that indicated for this Project.
B. Acoustical Performance: Test operable partitions in an independent acoustical laboratory in accordance with ASTM E90 test procedure to attain no less than the STC rating specified. Provide a complete and unedited written test report upon request.
C. Preparation of the opening shall conform to the criteria set forth per ASTM E557 Standard Guide for the Installation of Operable Partitions.
1.4 SUBMITTALSA. Product Data: Material descriptions, construction
details, finishes, installation details, and operating instructions for each type of operable partition, component, and accessory specified.
B. Shop Drawings: Show location and extent of operable partitions. Include plans, elevations, sections, details, attachments to other construction, and accessories. Indicate dimensions, weights, conditions at openings, and at storage areas, and required installation, storage, and operating clearances. Indicate location and installation requirements for hardware and track, including floor tolerances required and direction of travel. Indicate blocking to be provided by others.
C. Setting Drawings: Show embedded items and cutouts required in other work, including support beam punching template.
D. Samples: Color samples demonstrating full range of finishes available by architect. Verification samples will be available in same thickness and material indicated for the work.
1.5 DELIVERY, STORAGE, AND HANDLINGA. Clearly mark packages and panels with numbering
systems used on Shop Drawings. Do not use permanent markings on panels.
B. Protect panels during delivery, storage, and handling to comply with manufacturer’s direction and as required to prevent damage.
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.2
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA1.6 WARRANTYA. Provide written warranty by manufacturer of operable
partitions agreeing to repair or replace any components with manufacturing defects.
B. Warranty period: Two (2) years.
PART 2 – PRODUCTS
2.1 MANUFACTURERS, PRODUCTS, AND OPERATIONA. Manufacturers: Subject to compliance
withrequirements, provide product by the following: 1. Modernfold, Inc.B. Products: Subject to compliance with the
requirements, provide the following product: 1. Acousti-Seal #931 manually operated individual
panel operable partition.
2.2 OPERATIONA. Acousti-Seal #931: Series of individual flat panels,
manually operated, top supported with operable floor seals.
B. Final Closure: 1. Horizontally expanding panel edge with removable
crank. 2. Dual horizontally expanding panel edges with
removable crank. 3. Horizontally expanding panel edge with hinged
panel closure and removable crank. 4. Hinged panel closure. 5. Enclose. 6. Pass door closure.
2.3 PANEL CONSTRUCTIONA. Nominal 3-inch (76 mm) thick panels in manu-
facturer’s standard 48-inch (1220 mm) widths. All panel horizontal and vertical framing members fabricated from minimum 18-gage formed steel with overlapped and welded corners for rigidity. Top channel is reinforced to support suspension system components. Frame is designed so that full vertical edges of panels are of formed steel and provide concealed protection of the edges of the panel skin.
B. Panel Skin Options: 1. 1/2-inch (13 mm) tackable gypsum board, class
“A” rated single material or composite layers continuously bonded to panel frame. Acoustical ratings of panels with this construction (select one):
a. 28 STC b. 41 STC c. 47 STC d. 50 STC 2. 1/2-inch (13 mm) tackable moisture and mold
resistant gypsum board, class “A” rated single material or composite layers continuously bonded to panel frame. Acoustical ratings of panels with this construction (select one):
a. 28 STC b. 41 STC c. 47 STC d. 50 STC 3. 1/2-inch (13 mm) NAUF medium density fiber-
board, single material or composite layers continuously bonded to panel frame. Acoustical ratings of panels with this construction (select one):
a. 28 STC b. 41 STC c. 47 STC d. 50 STC 4. 22-gage steel faced 1/2-inch (13 mm) gypsum
board, class “A” rated single material or composite layers continuously bonded to panel frame. Acoustical ratings of panels with this construction:
a. 50 STCC. Hinges for Closure Panels, Pass Doors, and Pocket
Doors shall be (select one): 1. Full leaf butt hinges, attached directly to panel
frame with welded hinge anchor plates within panel to further support hinge mounting to frame. Lifetime warranty on hinges. Hinges mounted into panel edge or vertical astragal are not acceptable.
D. Panel Trim: No vertical trim required or allowed on edges of panels; minimal groove appearance at panel joints.
E. Panel Weights: Non-Steel Skin 1. 28 STC – 6 lbs./square foot 2. 41 STC – 6.5 lbs./square foot 3. 47 STC – 7 lbs./square foot 4. 50 STC – 8 lbs./square foot 5. 50 STC (with steel facing) – 8.5 lbs./square foot
2.4 PANEL FINISHESA. Panel face finish shall be (select as required): 1. Reinforced vinyl with woven backing weighing not
less than 21 ounces (595 g) per lineal yard. 2. Reinforced heavy duty vinyl with woven backing
weighing not less than 30 ounces (850 g) per lineal yard.
3. Acoustical, non-woven needle punch carpet, with fused fibers to prevent unraveling or fray of material.
4. Wall covering and upholstery fabric with surface treatment to resist stains.
5. Customer’s own material (subject to factory approval). 6. Full height steel markerboard work surface. 7. Full height 1/4-inch (6.35 mm) natural cork
tackboard with vinyl or fabric covering. 8. High pressure plastic laminate on MDF board. 9. Wood veneer on MDF board. 10. Uncovered for field finishing. 11. Primed for field finishing.B. Panel trim: Exposed panel trim of one consistent color
from manufacturer’s standard offering.
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 3
2.5 SOUND SEALSA. Vertical Interlocking Sound Seals between panels:
Roll-formed steel astragals, with reversible tongue and groove configuration in each panel edge for universal panel operation. Rigid plastic astragals or astragals in only one panel edge are not acceptable.
B. Horizontal Top Seals: Continuous contact extruded vinyl bulb shape with pairs of non-contacting vinyl fingers to prevent distortion without the need for mechanically operated parts.
C. Horizontal Bottom Seals (select one): 1. Modernfold IA2 bottom seal: Automatic operable
seals providing nominal 2-inch (51 mm) operating clearance with an operating range of +1/2-inch (13 mm) to –1-1/2 inch (38 mm) which automatically drop as panels are positioned, without the need for tools or cranks.
2. Modernfold IM2 bottom seal: Manually activated bottom seals with self-contained handle providing nominal 2-inch (51 mm) operating clearance with an operating range of +1/2-inch (13 mm) to –1-1/2 inch (38 mm). Seal shall be operable from panel edge or face.
3. Modernfold IC2 bottom seal: Manually activated operable bottom seals with removable handle providing nominal 2-inch (51 mm) operating clearance with an operating range of +1/2-inch (13 mm) to –1-1/2 inch (38 mm). Seal shall be operable from panel edge or face.
2.6 SUSPENSION SYSTEM (select one)A. #17 Suspension System 1. Suspension Tracks: Minimum 11-gage, 0.12-inch
(3 mm) roll-formed steel track, suitable for either direct mounting to a wood header or supported by adjustable steel hanger brackets, supporting the load-bearing surface of the track, connected to structural support by pairs of 3/8-inch (9.5 mm) diameter threaded rods. Aluminum track is not acceptable.
a. Exposed track soffit: Steel, integral to track, and pre-painted off-white.
2. Carriers: a. Smart Track™: Two all-steel trolleys with
steel-tired ball bearing wheels. Non-steel tires are not acceptable. Suspension system shall provide automatic indexing of panels into stack area using preprogrammed switches and trolleys without electrical, pneumatic, or mechanical activation.
- OR -
b. Right Angle Turn: Two carriers of low-friction polymer, reinforced with steel, that permit panels to traverse L, T, and X intersections without mechanical switching, on all panels
except hinged closure panels.B. #14 Suspension System: Smart Track 1. Suspension Tracks: Minimum 7-gage, 0.18-inch (5
mm) roll formed steel. Static loading of track with brackets at 48-inch (1220 mm) centers shall show no failure of track or brackets at 5,000 pounds (2268 kg) point loading at mid-span. Track shall be supported by adjustable steel hanger brackets connected to structural support pairs of 1/2-inch (13 mm) diameter threaded rods. Brackets must support the load bearing surface of the track.
a. Exposed track soffit: Steel, removable for service and maintenance, attached to track bracket without exposed fasteners, and pre-painted off-white.
2. Carriers: Two all-steel trolleys with steel-tired ball bearing wheels. Non-steel tires are not acceptable. Suspension system shall provide automatic indexing of panels into stack area using preprogrammed switches and trolleys without electrical, pneumatic, or mechanical activation.
- OR -
C. RT100 Suspension System: Multi-Directional 1. Suspension Tracks: Precision heat-treated extruded
aluminum. Track to be supported by pairs of 3/8-inch (9.5 mm) diameter threaded rods. 2. Exposed track soffit: Aluminum, integral to track,
pre-painted off white. 3. Carriers: Shall have horizontal counter-rotating
wheels with heavy duty thrust steel bearings. Carriers permit panels to traverse L, T, or X intersections without mechanical switching.
- OR -
D. RT200 Suspension System: Multi-Directional 1. Suspension Tracks: Precision heat-treated extruded
aluminum. Track to be supported by pairs of 3/8-inch (9.5 mm) diameter threaded rods.
2. Exposed track soffit: Aluminum, integral to track, pre-painted off white.
3. Carriers: Shall have horizontal counter-rotating wheels with oversized, steel reinforced, heavy duty thrust steel bearings. Carriers permit panels to traverse L,T, or X intersections without mechanical switching.
- OR -
E. Modernfold Truss System – Pre-fabricated, self-supporting header system for the support of operable partitions. (For complete specification, see Modernfold Truss System, Form #2600.)
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.4
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA2.7 OPTIONSA. Pass Doors: 1. Single Pass Doors (select one): a. Standard hollow metal door hung in a steel
frame. ADA-compliant pass door to be equipped with friction latch and flush pulls for panic operation. No threshold will be permitted.
i. Pass door to be prime painted for field finishing.
ii. Pass door to be painted one consistent color from manufacturer’s standard offering.
b. Matching pass door same thickness and appearance as the panels. ADA-compliant pass door equipped with friction latch and flush pulls for panic operation. No threshold will be permitted.
2. Double Pass Doors (select one): a. Standard hollow metal doors hung in a steel
frame. No center post is permitted. Active leaf to be equipped with friction latch and flush pulls for panic operation. No threshold will be permitted.
i. Pass door to be prime painted for field finishing.
ii. Pass door to be painted one consistent color from manufacturer’s standard offering.
b. Matching pass door same thickness and appearance as the panels. No center post is permitted. Active leaf to be trimless and equipped with friction latch and flush pulls for panic operation. No threshold will be permitted.
3. Hardware: a. Automatic door closures. b. Self-Illuminated exit signs. c. Panic hardware.B. Work Surfaces: 1. Markerboard: White enamel on steel, bonded to
the face of the panel with horizontal trim without exposed fasteners. Trim is not acceptable on vertical edges to provide uninterrupted work surface.
2. Tackboard: Minimum 1/4-inch (6.35 mm) natural cork, covered with vinyl or fabric, with horizontal trim without exposed fasteners. Trim is not acceptable on vertical edges.
C. Available Accessories/Options: 1. Pocket Doors: Acousti-Seal Pocket Doors by
Modernfold, Inc., with same finish and appearance as the adjacent panels.
2. Finished end caps at 90°/135°. 3. Intersecting partition interface. 4. Inset window options: glazed or unglazed.
PART 3 – EXECUTION
3.1 INSTALLATIONA. General: Comply with ASTM E557, operable partition
manufacturer’s written installation instructions, Drawings, and approved Shop Drawings.
B. Install operable partitions and accessories after other finishing operations, including painting have been completed.
C. Match operable partitions by installing panels from marked packages in numbered sequence indicated on Shop Drawings.
D. Broken, cracked, chipped, deformed, or unmatched panels are not acceptable.
3.2 CLEANING AND PROTECTIONA. Clean partition surfaces upon completing installation
of operable partitions to remove dust, dirt, adhesives, and other foreign materials according to manufacturer’s written instructions.
B. Provide final protection and maintain conditions in a manner acceptable to the manufacturer and Installer that insure operable partitions are without damage or deterioration at time of Substantial Completion.
3.3 ADJUSTINGA. Adjust operable partitions to operate smoothly,
easily, and quietly, free from binding, warp, excessive deflection, distortion, nonalignment, misplacement, disruption, or malfunction throughout entire operational range. Lubricate hardware and other moving parts.
3.4 EXAMINATIONA. Examine flooring, structural support, and opening, with
Installer present, for compliance with requirements for installation tolerances and other conditions affecting performance of operable partitions. Proceed with installation only after unsatisfactory conditions have been corrected.
3.5 DEMONSTRATIONA. Demonstrate proper operation and maintenance
procedures to Owner’s representative.B. Provide Operation and Maintenance Manual to
Owner’s representative.
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 5
Acousti-Seal 931 28 STC 41 STC 47 STC 50 STC 50 STC Steel Face
#17 Direct Mounted Smart Track
14’-4”(4369 mm)
14’-4”(4369 mm)
14’-4”(4369 mm)
12’-4”(3759 mm)
10’-4”(3150 mm)
#17 Bracket Mounted Smart Track
20’-4”(6198 mm)
20’-4”(6198 mm)
20’-4”(6198 mm)
20’-4”(6198 mm)
14’-4”(4369 mm)
#14 Bracket Mounted Smart Track
24’-4”(7417 mm)
24’-4”(7417 mm)
24’-4”(7417 mm)
24’-4”(7417 mm)
14’-4”(4369 mm)
#17 Direct Mounted Right Angle Track
10’-4”(3150 mm)
10’-4”(3150 mm)
10’-4”(3150 mm)
10’-4”(3150 mm)
8’-4”(2540 mm)
#17 Bracket Mounted Right Angle Track
10’-4”(3150 mm)
10’-4”(3150 mm)
10’-4”(3150 mm)
10’-4”(3150 mm)
8’-4”(2540 mm)
RT100 Multi-Directional 16’-4”(4978 mm) 16’-4”(4978 mm) 16’-4”(4978 mm) 16’-4”(4978 mm) 14’-4” (4369 mm)
RT200 Multi-Directional 20’-4”(6198 mm) 20’-4”(6198 mm) 20’-4”(6198 mm) 20’-4”(6198 mm) 14’-4” (4369 mm)
Non-Steel Skin Max Height
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.6
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Acousti-Seal 931Panel Section Frame Details
PANEL DETAILS ARE NOT TO SCALE
Acousti-Seal 931Standard Panel Joint
Roll-formed vertical frame channel provides added strength while eliminating any sharp edges. The outer covering is secured under the steel astragal to prevent peeling. The complete vertical edge of the panel is steel for maximum durability.
NON-STEEL SKIN PANEL CONSTRUCTION
BUILT-IN CONCEALEDEDGE PROTECTIONFOR PANEL SKIN
FINISH MATERIAL WRAPPEDAROUND PANEL EDGE ANDCAPTURED BY VERTICAL ASTRAGAL
18 GA. ROLL-FORMED STEEL VERTICAL FRAMECHANNEL WITH NOSHARP EDGES
FULL WIDTHLAMINATEDPANEL SKIN WITHCONTINUOUSPERIMETER BOND
STEEL DUALINTERLOCKING VERTICALASTRAGAL WITH VINYLACOUSTICAL GASKET
FINE LINE PANELJOINT WITH NOVERTICAL EDGE TRIM
ACOUSTICALINSULATION
NG-68
INSULATED BOTTOMSEAL CAVITY WITHDOUBLE ACOUSTICALSEALS
DUAL-DUROMETERFLOOR SEAL WITHCONTOUR MATCHINGOUTER SEALS
UNDERSIDE OFTRACK/SOFFIT
BULB-AND-FINGERACOUSTICAL SWEEP
FULL PERIMETER18 GA. STEELFRAME WITHOVERLAPPED ANDWELDED CORNERS
14 GA.REINFORCEDFORMED STEELTOP CHANNEL
.63" (16 mm)SOLID STEELTROLLEY MOUNT
FORMED STEELBOTTOM FRAMECHANNEL WITHBOTTOM EDGEPROTECTION
FLOOR
SELF-CONTAINED,SERVICEABLEBOTTOM SEALS
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 7
SUSPENSION SYSTEM OPTIONS
(146mm)
(114mm)(10mm)(178mm)
(3mm)
(108mm)
(102mm)
NG-05
#17 Track System Bracket Mount(Smart Track Shown)
(146mm)
(114mm)
(10mm)(178mm)
(3mm)
(108mm)
(178mm)
NG-36
#17 Track System Bracket MountHeavy-Duty (Smart Track Shown)
(146mm)
(114mm)(10mm)(178mm)
(3mm)
(108mm)
(102mm)
NG-01
#17 Track System Direct Mount(Right Angle Shown)
(190mm)
(127mm)
(12mm)(229mm)
(19mm)
(260mm)
(330mm)
NG-21
#14 Track System Bracket Mount (Smart Track Shown)
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.8
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATASUSPENSION SYSTEM OPTIONS
(64mm)(10mm)
(51mm)(10mm)
(10mm)
(178mm)
(25mm)
(127mm)
(178mm)
NG-19
RT100 Multi-Directional Suspension System
(64mm) (10mm)
(51mm)(10mm)
(10mm)
(178mm)
(25mm)
(130mm)
(203mm)
NG-37
RT200 Multi-Directional Suspension System
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 9
PANEL, WORK SURFACE, AND PASS DOOR OPTIONS
FLOOR SEAL OPTIONS
SELF-LUMINOUS EXIT SIGNS(SURFACE OR RECESSED MOUNTED)
NO VERTICAL TRIMON PANEL (TYPICAL)
"H" TYPE PASSDOOR
SELF-LUMINOUS EXIT SIGN (OPTIONALLOCATION)
RECESSED HAND PULL WITHFRICTION LATCH (ADA COMPLIANT)
RECESSED ERASERHOLDER
6'-8
" (2
03
3 m
m)
OR
7'-0
" (2
13
4 m
m)
VAR
IAB
LE 4
'-0"
(12
20
mm
)
MARKERBOARD OR TACKBOARD(NO VERTICAL TRIM REQUIRED)
CHALKBOARD
FLOOR
(51mm)
(12mm) (38mm)
NG-43
2-inch Manual Seal
(51mm)
FLOOR
(12mm)(38mm)
NG-41B
2-inch Automatic Seal
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.10
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATAPOCKET ENCLOSURE AND STACKING OPTIONS
1'-1
"(3
30 m
m)
MIN
.
SIDE R
SIDE L
10"(254 mm)
HOLD
WID
ES
T PA
NE
LW
IDTH
MIN
.
STACK DEPTHNO. OF PANELS× 3.75" (95 mm)
+ 8.50" (216 mm)
Enclose –90° Side Stack Right Angle
SIDE RSIDE L
WID
ES
T PA
NE
LW
IDTH
MIN
.
1'-1
"(3
30
mm
)M
IN
STACK DEPTHNO. OF PANELS
× 3.75" (95 mm) +7" (178 mm)
Bi-Fold Expandable Closure –(Flat Stack) Smart Track
1'-1
"(3
30
mm
)M
IN
SIDE RSIDE L
WID
ES
T PA
NE
LW
IDTH
MIN
.STACK DEPTH
NO. OF PANELS× 3.75" (95 mm) +
4" (102 mm)
Bi-Fold Hinged Panel Closure –(Flat Stack) Smart Track
WIDEST PANELWIDTH MIN.
11"(279 mm)
MIN.
2'-0
"(6
10
mm
)M
IN
1'-0
"(3
05
mm
)H
OLD
TYPE 1POCKET DOOR
STA
CK
DE
PTH
NO
. O
F PA
NE
LS×
4"
(10
2 m
m)
+
13
.50
" (3
43
mm
)
SIDE R
SIDE L
Remote Expandable Closure – Parallel Stack(Angle Stack) Smart Track
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 11
POCKET ENCLOSURE AND STACKING OPTIONS
1'-4
"(4
06
mm
)M
IN.
TYPE IVAPOCKET DOOR
SIDE R
SIDE L
WID
ES
T PA
NE
LW
IDTH
+
3"
(76
mm
) M
IN.
STACK DEPTHPLUS 6" (152 mm)
MIN.
STACK DEPTHNO. OF PANELS× 3.75" (95 mm)
+ 2" (51 mm)
Remote Expandable Closure – 90° Side Stack (Flat Stack) Smart Track
1'-1
"(3
30
mm
)M
IN
SIDE RSIDE L
WID
ES
T PA
NE
LW
IDTH
MIN
.
STACK DEPTHNO. OF PANELS× 3.75" (95 mm)
+ 8.50" (216 mm)
10" (254 mm) HOLD
Expandable Closure –90° Side Stack Right Angle
1'-1
"(3
30
mm
)M
IN
SIDE RSIDE L
WID
ES
T PA
NE
LW
IDTH
MIN
.STACK DEPTH
NO. OF PANELS× 4.00" (102 mm)
+ 13.50" (343 mm)
Bi-Fold Expandable Closure –(Angle Stack) Smart Track
1'-4
"(4
06
mm
)M
IN.
TYPE IVAPOCKET DOOR
SIDE R
SIDE L
WID
ES
TPA
NE
L W
IDTH
+ 3
" (7
6 m
m)
MIN
.
STACK DEPTHPLUS 6" (152 mm)
MIN.
STACK DEPTHNO. OF PANELS× 3.75" (95 mm)
+ 2" (51 mm)
Remote Expandable Closure –90° Side Stack Right Angle
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.12
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATAPOCKET ENCLOSURE AND STACKING OPTIONS
WIDEST PANELWIDTH MIN.
2'-0
"(6
10
mm
)M
IN.
1'-0
"(3
05 m
m)
HO
LD
TYPE 1POCKET DOOR
STAC
K D
EPTH
NO
.O
F PA
NEL
S ×
3.75
" (95
mm
)+
2" (5
1 m
m)
SIDE R
SIDE L
10" (254 mm)
Remote Expandable Closure – Parallel Stack Right Angle
SIDE R
SIDE L
1'-1
"(3
30
mm
)M
INW
IDE
ST
PAN
EL
WID
TH M
IN.
STACK DEPTHNO. OF PANELS× 5" (127 mm)+ 2" (51 mm)
1'-0"(305 mm)
HOLD
Double-Ended Expandable Panel Closure – Offset Stack Smart Track
1'-1
"(3
30
mm
)M
IN.
SIDE R
SIDE L
WID
ES
T PA
NE
LW
IDTH
MIN
.STACK DEPTH
NO. OF PANELS× 3.75" (95 mm)
+ 2" (51 mm)
Remote Expandable Closure –Offset Stack Right Angle
1'-1
"(3
30
mm
)M
INW
IDE
ST
PAN
EL
WID
TH M
IN.
STACK DEPTHNO. OF PANELS× 5" (127 mm)+ 2" (51 mm)
1'-0"(305 mm)
HOLD
SIDE R
SIDE L
Expandable Panel with Hinged Flap Panel –Offset Stack Smart Track
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 13
PANEL CROSS SECTIONS
CAULKING BETWEENJAMB AND WALL
NG-61R
Hinged Jamb
(171mm)
FINISH SAME AS PANELS
(76mm)(76mm)
NG-119
Enclose
(0 TO 146mm)
NG-60
Expandable Panel w/Bulb Seal
(0 TO 146mm)
CAULKING BETWEENJAMB AND WALL
NG-55
Expandable Panel w/Jamb
NG-66R
Hinged Panel Meeting w/Bulb Seal
NG-67L
Hinged Panel Meeting w/Pass Door Astragal
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.14
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATAPANEL CROSS SECTIONS
CAULKING BETWEENJAMB AND WALL
Nominal Fixed Jamb
NG-70
Bulb Seal and Intersection
NG-93
CAULKING BETWEENJAMB AND WALL
Variable Fixed Jamb
NG-72
(44mm)
(44mm)
135 Degree Angle Attachment
NG-79
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
ACOUSTI-SEAL® 900 SERIES TECHNICAL DATA
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com. 15
Acousti-Seal® 931 Technical Data10 22 26 (10650) Operable Partitions
Modernfold, Inc.215 West New RoadGreenfield, IN 46140
Toll Free: 800.869.9685
email: [email protected]
A DORMA Group Companywww.dorma-usa.com
Form No. 2501 4/13
Manufacturer reserves the right to change design or specifications at any time without notice.Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.