ACE HYDRAULIC & PNEUMATICS/ACADEMY TOOL & SUPPLY

www.acehydraulic.com

January 31, 2020

SALES • SERVICE • PARTS

some quantities

limited

Distributors of INDUSTRIAL TOOLS & SUPPLIES

List 1401.43 SALE $890

Model 6917Air-Operated Portable Grease Pump PackageHigh volume and pressure wipes 120 lb. drum sides clean and keeps the drum primed.inc. high pressure 50:1 pneumatic pump, high pressure grease control valve, universal swivel and coupler and 7’ hose; drum cover, flexible follower plate and band dolly with wheels.

List 1526.68 SALE $979

Model 989

Grease Pump Gear Lube

List 1005.00 SALE $850

Model 282396

3:1Oil Stub PumpStub Pipe ConnectionAir OperatedSeries 25 • 3:1 • Motor Oil, ATF, Gear Lube and Other Fluid Lubricants

25-50 Pound PailSteel cover has three thumb screws to clamp security to any original 25-50 pound refinery container. Bucket not included.

2 Ton Capacity. Heavy duty chassis. Economical for a variety of automotive shop uses. Low 2-3/4” low lift height. Safety by-pass system. Heavy duty chassis. 50.25” long two-piece handle. Foam handle sleeve is included. Dual pump piston de-sign raises the jack to maximum height in 8-1/2 pump strokes, U-joint release mechanism for more control.

Model 71233A

2 Ton Floor Jack Double Pump

SALE $298

Load Capacity 1 poundsHeight 37.0 inchesLength 34.0 inchesMax Lifting Height 1.0 inchesRust inhibitive coating on rams. Foot operated pump and lowering pedals.1/2 Ton Telescopic Transmission Jack is designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift. List $1557.00

Model 72500E

1/2 Ton Telescopic Transmission Jack

SALE $1063

Model 71335

3 Ton SUV Floor Jack

List $568.00 SALE $388

Model 936523 Ton Floor Jack

List $867.13

SALE $479Assembled in the USA

• Cast iron lift arm for heavy duty loads • U-joint release mechanism for precise load control • Min. Height: 4 1/2” • Max. Height: 20 1/4” • Jack Size: 28 1/2” L x 14 7/8” W

Model 7793B

List $1325.00 SALE $695

1/2 Ton Telescopic Transmission JackFoot activated pump pedal for hands free raising of the rams. Extended to reach a maximum height of 74 inches. Lowered telescopic rams enable the transmission to be transferred from the jack to the work table. Nylon strap tie down secures the load to the saddle. Overload valve prevents jack from being used beyond its rated capacity

Designed to be used as an aid in the removal and installation of automotive and light truck transmissions, transfer cases and transaxles. They are intended for use under an overhead lift or in a garage pit.Specifications:Capacity: 1000 lbs.Base Size: 34-1/8 x 35-1/2 in.Min. Height: 37-7/8 in.Max. Height: 77-5/8 in.Saddle Spread: 11-1/2 ~ 21 in.List $2046.31

Model BH70511/2 Ton Telescopic

Transmission Jack

SALE $1495

6720 VIP Parkway • Syracuse, New York 13211 Phone 315-454-8989 24 Hour Fax 315-455-9522

Steel hydraulic block construction includes a double pump piston design that quickly raises the jack to the maximum height. 4” low and 21-3/8” maximum lift heights (without saddle adapter)7” low and 24-3/8” maximum lift heights (with saddle adapter)Safety by-pass system protects pressure cylinder

Safety overload system Heavy-duty chassis

SALE $239

Model 3601

Tank Capacity 72.0 Qts./68.1 LtDrain Bowl Capacity11 Qts./10.4 Lt

For draining, transferring and evacuating motor oils, transmission and power steering fluids quickly. Offers excellent mobility, easy bowl positioning and simple-to-use pressurized evacuation. List $393.00

Pressurized Used Oil Receiver

SALE $725

Model 3624

High-strength polyethylene reinforced tank and bowl means no corrosion, no denting, no swelling• Evacuates easily with standard shop air• Large capacity: 26 gallon / 100 liter• Large tool tray and convenient oil filterdrain are built into the top of the tank• Includes fluid level sight gauge, fixedair regulator and safety relief valveList $939.00

Evacuation Tank

SALE $139

Power Unit Pump for Auto Lifts3HP, 1 Ph, 3360 RPM

SALE $495

Model BH-7003-01

Vertical Mount Power Unit for Auto Lifts1HP, 1 PhIdeal for Parking Lifts, Hobbyist Lifts and Storage Lifts

SALE $495

Model BH-7003-02Horizontal or Vertical Mount Power Unit for Auto Lifts3/4 HP, 1 PhIdeal for Low andMid-Rise Lifts SALE

$495

Model BH-7003-03

Oil Lift Drain 8 GallonsQuick release height adjustmentIncreased stability8 gallon translucent jug with the new shape in lift drainsReinforced base will not warp with hot oil.List $193.00

Model 11102

ACE HYDRAULIC& PNEUMATICS

TERMS and CONDITIONS: Prices subject to change without notice in accordance with manufacturing costs. We have the right to limit quantities. SUPPLIES MAY BE LIMITED. We are not responsible for typographical errors.

All returns MUST be unused and in original box. NO RETURNS ON SPECIAL ORDERS. NO C.O.D. All items FOB Syracuse, NY. Items marked free freight applies to continental USA only.

SOME QUANTITIES LIMITED • PRICES MAY FLUCTUATE DUE TO TARIFFSwww.acehydraulic.com

WE STOCK A LARGE VARIETY OF ENERPAC & POWERTEAM ACCESSORIES

Diaphragm Pump Alemite Diaphragm Pumps are designed for both high volume transfer and dispensing a variety of low viscosity fluids including new oil, used oil, windshield washer fluid, antifreeze, and other materials.

SALE $595

Air Inlet: 1/4”Body: AluminumDiaphragm: BunaPressure: 100 PSIInlet/Outlet: 1/2”

Model 8322 Air Operated

List $726.00

1” Diaphragm Pump

SALE $620

Model 8323 Air OperatedDiaphragm Pump

Pump Body: Aluminum Wetted or Soft Parts: PTFESize Inlet NPT in.: 1 Size Outlet NPT in.: 1Free Delivery Gallon: 45 Free Delivery Liter: 170.3Air Inlet NPT(F) in.: 1/2Maximum Pressure: 50 psi/3.45 barElement Particle Size : 1/4 in./6.35 mmApplication: Unleaded gas, diesel, kerosene used oil

SALE $1100

Model 85635

List $1500.00

Air Inlet 1/2”Description 1” Diaphragm PumpBody Material AluminumDiaphragm Material BunaPressure 125 PSIMaterial Inlet/Outlet 1”Delivery (GPM) 45Recommended Fluids New/Used Oil

List $922.91

Model 1210SPneumatic Breaker

Chuck / Shank Size1” x 4-1/4”This tool is lightweight, fast and very hard hitting. It is most often used on jobs where weight restric-tions are in place such as ramps, bridge decks and some highway jobs. Equipped with a muffler.

SALE $895

Model 716

SALE $159 SALE

$210

Model CP7120Needle Scalers

List $318.00

BPM 4600 Adjustable sleeve, 19 x 1/8” (3 mm) steel needles and 1.37” (35 mm) width chisel with high resistance to wear

Power to loosen the toughest fastener. Weighs less than 12 lbs. 6 vane motor for speed - power with any 1/2-Inch hose air supply. Twin Hammer high performance clutch. Ergonomic handle exhaust keeps exhaust air away from the operator

Chicago Pneumatic

3/4-In. Super Duty Air Impact Wrench1200 Ft. Lbs. of Torque

SALE $495

Model CP7763 IngersollRand

IngersollRand

3/4” Super DutyAir Impact WrenchJumbo hammer mechanism.Up to 1,000ft.-lbs. of torque.Trouble-free, longer performance aided by Pressure-Feed Lube System.Compact and only 7 5/8” long.Handle exhaust.

Model 261 Model 285B-6

SALE $495 SALE

$595

1” Drive Heavy Duty Impact Wrench with 6” AnvilAdjustable 3 position power regulator provides ultimate power control. Robust 6 vane air motor delivers 1,450 ft./lbs. maximum torque. Free speed: 5,000 RPM

SALE $495

Astro Pneumatic

Model 7865

Set contains C-frame press, 3 receiver tubes sizes: 2-3/4”x3”, 2-1/4”x 2-1/2” & 1-3/4”x2”, installation and removing adaptersSet also includes 4-wheel drive ball joint service kit SALE

$119

Ball Joint Service Tool Kitw/4-wheel Drive Adapters

1 Gal.

SALE $89

Pneumatic ToolAntifreeze LubricantPneumatic tool anti-freeze and lubricantPrevents freezingFire resistantAbsorbs moisture

• Develops 10,000 PSI• Has 3/8” NPTF Fluid Coupler• Size: 16-3/4” x 6” x 6-5/8

High-pressure hydraulic hand pump for lifting, bolting, or applying pressure with a hydraulic cylinder (sold separately)Advances and releases a single-acting cylinderMaximum operating pressure of 10,000 pounds per square inch (psi)Single-speed pump for applications with a constantly applied load Internal pressure relief valve helps prevent pump overload

Single Speed Steel Hand Pump

SALE $459

Air/Hydraulic Foot Pump

Model 22903

SALE $395

Model P39

Industrial 0.401 shank Air HammerSuper durable for industrial markets3,500 blows per minuteQuick change retainer for simple accessory changes

SALE $495

Sand RammerUSA Made

Bore 11/16”Stroke 2”Taper SBlows per Minute 1600Length 11-3/4”Weight 3.75lbs.Air Inlet Thread 3/8”Butt Diameter 1-3/4” Rubber

Model B651144 Ton Porto Power List 291.00

Model B65115 10 Ton Porto-PowerList 467.00

SALE $269

SALE $395

Torque Wrench

3/4 Inch Drive 100-600 ft lbs

SALE $495

Model 97355

Ratchets in only one direction. Rubberized head. Selected reading is automatically locked in. Indicates desired torque by feel and sound. Accuracy +-4 percent right hand and +-6 percent left hand direction from 20-100 percent of capacity. Rugged non-slip metal handles. List $820.00

Ram Pump Ram Ram Ram Model Capacity Capacity Close Hgt Ext Hgt Eff Area GWB65114 4 ton 8,000 psi 11” 15-3/4” 1.0 in2 46 lbsB65115 10 ton 10,000 psi 13 5/8” 19-3/4” 2.4 in2 88 lbs

Effortless air operation. Air Turbo Motor . Built-in by-pass device protects hydraulic system. Versatile “Quick Connector” design for easy removal of air hose from air motor allowing compact storage or remote operationAll air bottle jacks have chrome plated ramsList $653.00

Model SFA1820920 Ton Low Profile Air Actuated Bottle Jack

SALE $435

27 x 48 5500Lb. CapacityPallet Truck