accident prevention iso -...

TISI Library Accession List (April-June 2007)

TISI Library Accession List(April-June 2007)

ACCIDENT PREVENTION ISO

IWA 5 2006 Emergency preparedness /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ACQUISITION SYSTEM - LAW AND LEGISLATION Government Printing Office

CFR 48 2005 Code of Federal regulations - Title 48 - Federal acquisition regulations system /ByOffice of the Federal Register. Washington DC: Government Printing Office, 2005.

ACTIVATED CARBON AWWA

ANSI/AWWA B600 2005 Powdered activated carbon /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA B604 2005 Granular activated carbon /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA B605 1999 Reactivation of granular activated carbon /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 1999.

ADHESIVES ISO

ISO 14678 2005 Adhesives - Determination of resistance to flow (sagging) /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

AGRICULTURAL TRACTORS ISO

ISO 24347 2005 Agricultural vehicles - Mechanical connections between towed and towing vehicles -Dimensions of ball-type coupling device (80 mm) /By International Organization for Standardization (ISO).Geneva: ISO, 2005.


AIDS FOR THE DISABLED ISO

ISO/TR 13570-1 2005 Wheelchairs - P.1: Guidelines for the application of the ISO 7176 series onwheelchairs /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ALLOY STEELS ISO

ISO 13899-2 2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductivelycoupled plasma atomic emission spectrometric method - P.2: Determination of Nb content /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

ISO/TS 13899-3 2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductivelycoupled plasma atomic emission spectrometric method - P.3: Determination of W content /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

ALLOYS ISO

ISO 11844-1 2006 Corrosion of metals and alloys - Classification of low corrosivity of indooratmospheres - P.1: Determination and estimation of indoor corrosivity /By International Organization forStandardization (ISO). Geneva: ISO, 2006.

ISO 11844-2 2005 Corrosion of metals and alloys - Classification of low corrosivity of indooratmospheres - P.2: Determination of corrosion attack in indoor atmospheres /By International Organizationfor Standardization (ISO). Geneva: ISO, 2005.

ISO 11844-3 2006 Corrosion of metals and alloys - Classification of low corrosivity of indooratmospheres - P.3: Measurement of environmental parameters affecting indoor corrosivity /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.

ISO 16151 2005 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidifiedsalt spray, "dry" and "wet" conditions /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ALUMINATE AWWA

ANSI/AWWA B405 2000 Sodium aluminate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2000.


ALUMINIUM AWWA ANSI/AWWA B403 2003 Aluminium sulfate - Liquid, ground, or lump /By American Water Works

Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003. ISO ISO 8008 2005 Aluminium oxide primarily used for the production of aluminium - Determination of

specific surface area by nitrogen adsorption /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.

ISO 14420 2005 Carbonaceous products for the production of aluminium - Baked anodes andshaped carbon products - Determination of the coefficient of linear thermal expansion /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

ISO 14435 2005 Carbonaceous materials for the production of aluminium - Petroleum coke -Determination of trace metals by inductively coupled plasma atomic emission spectrometry /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

ALUMINIUM ALLOYS ISO ISO 14788 2005 Continuous hot-dip zinc-5% aluminium alloy coated steel sheet /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ALUMINIUM INORGANIC COMPOUNDS AWWA

ANSI/AWWA B408 2003 Liquid polyaluminium chloride /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

ALUMINIUM INORGANIC COMPOUNDS - ADSORPTION ISO ISO 8008 2005 Aluminium oxide primarily used for the production of aluminium - Determination of


ALUMINIUM OXIDE ISO ISO 8008 2005 Aluminium oxide primarily used for the production of aluminium - Determination of



AMMONIUM INORGANIC COMPOUNDS AWWA

ANSI/AWWA B302 2005 Ammonium sulfate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA B451 2004 Poly (Diallyldimethyl-ammonium chloride) /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

ANHYDRITE AWWA

ANSI/AWWA B305 2006 Anhydrous ammonia /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

ANSI/AWWA B504 2005 Monosodium phosphate, anhydrous /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANIMAL FEED ISO

ISO 13904 2005 Animal feeding stuffs - Determination of tryptophan content /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

ANTHROPOMETRIC CHARACTERISTICS ISO

ISO 15537 2004 Principles for selecting and using test persons for testing anthropometric aspectsof industrial products and designs /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ARC WELDING ISO

ISO 6848 2004 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ASH AWWA

ANSI/AWWA B201 2003 Soda ash /By American Water Works Association (AWWA) and AmericanNational Standards Institute (ANSI). Denver: AWWA, 2003.


ATOMIC ABSORPTION SPECTROPHOTOMETRY ISO ISO 6561-1 2005 Fruits, vegetables and derived products - Determination of cadmium content -

P.1: Method using graphite furnace atomic absorption spectrometry /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

ISO 6561-2 2005 Fruits, vegetables and derived products - Determination of cadmium content -P.2: Method using flame atomic absorption spectrometry /By International Organization for Standardization(ISO). Geneva: ISO, 2005.

AUDIO SYSTEMS ISO ISO/IEC TR 14496-7 2004 Information technology - Coding of audio-visual objects - P.7: Optimized

reference software for coding of audio-visual objects /By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2004.

AUDIOVISUAL MATERIALS ISO ISO/IEC TR 14496-7 2004 Information technology - Coding of audio-visual objects - P.7: Optimized

reference software for coding of audio-visual objects /By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2004.

ISO/IEC 14496-17 2006 Information technology - Coding of audio-visual objects - P.17: Streaming textformat /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

AUTOMATIC CONTROL SYSTEMS ISO ISO 23570-1 2005 Industrial automation systems and integration - Distributed installation in industrial

applications - P.1: Sensors and actuators /By International Organization for Standardization (ISO). Geneva:ISO, 2005.

ISO 23570-2 2005 Industrial automation systems and integration - Distributed installation in industrialapplications - P.2: Hybrid communication bus /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

BANKS ISO ISO 9564-2 2005 Banking - Personal ldentification Number management and security - P.2:

Approved algorithms for PIN encipherment /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.


ISO 13491-2 2005 Banking - Secure cryptographic devices (retail) - P.2: Security compliancechecklists for devices used in financial transactions /By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2005.

BEARINGS JSA

JIS Z2507 2000 Sintered metal bearing - Determination of radial crushing strength /By JapaneseStandards Association (JSA). Tokyo: JSA, 2000.

BOARD (PAPER) ISO

ISO/TR 24498 2006 Paper, board and pulps - Estimation of uncertainty for test methods /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2006.

BUILDINGS ISO

ISO 13792 2005 Thermal performance of buildings - Calculation of internal temperatures of a roomin summer without mechanical cooling - Simplified methods /By International Organization for Standardization(ISO). Geneva: ISO, 2005.

BUOYANCY AIDS ISO

ISO 12402-9 2006 Personal flotation devices - P.9: Test methods /By International Organization forStandardization (ISO). Geneva: ISO, 2006.

BUTTER ISO

ISO 7238 2004 Butter - Determination of pH of the serum - Potentiometric method /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

CALCIUM INORGANIC COMPOUNDS AWWA

ANSI/AWWA B550 2005 Calcium chloride /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.


ISO

ISO 16063-13 2001 Methods for the calibration of vibration and shock transducers - P.13: Primaryshock calibration using laser interferometry /By International Organization for Standardization (ISO). Geneva:ISO, 2001.

CAMERA LENSES JSA

JIS B7111 1997 Engagement of accessories to lens front /By Japanese Standards Association(JSA). Tokyo: JSA, 1997.

CARBON DIOXIDE AWWA

ANSI/AWWA B510 2006 Carbon dioxide /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

CARBONACEOUS MATTER DETERMINATION ISO ISO 14420 2005 Carbonaceous products for the production of aluminium - Baked anodes and

shaped carbon products - Determination of the coefficient of linear thermal expansion /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.


CEMENT AWWA ANSI/AWWA C104/A21.4 2003 Cement-motar lining for ductile-iron pipe and fittings for water /By

American Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2003.

CEMENT MORTAR AWWA ANSI/AWWA C104/A21.4 2003 Cement-motar lining for ductile-iron pipe and fittings for water /By



ANSI/AWWA C205 2000 Cement-motar protective lining and coating for steel water pipe - 4 in. (100mm) and larger - Shop applied /By American Water Works Association (AWWA) and American NationalStandards Institute (ANSI). Denver: AWWA, 2000.

CERAMICS ISO

ISO 24369 2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determinationof content of coarse particles in ceramic powders by wet sieving method /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

CHEMICAL ANALYSIS AND TESTING ISO

ISO/TR 18392 2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures fordetermining backgrounds /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

CHEMICAL COMPOSITION ISO

ISO 17925 2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass perunit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometryand flame atomic absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

CHLORINE AWWA ANSI/AWWA B301 2004 Liquid chlorine /By American Water Works Association (AWWA) and

American National Standards Institute (ANSI). Denver: AWWA, 2004.

CLASSIFICATION SYSTEMS ISO ISO 11760 2005 Classification of coals /By International Organization for Standardization (ISO).

Geneva: ISO, 2005.

CLOTH ISO

ISO 7768 2006 Textiles - Test method for assessing the smoothness appearance of fabrics aftercleansing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.


ISO 7769 2006 Textiles - Test method for assessing the appearance of creases in fabrics aftercleansing /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.

ISO 7770 2006 Textiles - Test method for assessing the smoothness appearance of seams infabrics after cleansing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

COAL ISO

ISO 11760 2005 Classification of coals /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

COATING PROCESSES ISO

ISO 14788 2005 Continuous hot-dip zinc-5% aluminium alloy coated steel sheet /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

COATINGS BSI

BS EN 12472 2005 Method for the simulation of wear and corrosion for the detection of nickelrelease from coated items /By British Standards Institution (BSI). London: BSI, 2005.

CODING (DATA CONVERSION) ISO

ISO/IEC 14496-17 2006 Information technology - Coding of audio-visual objects - P.17: Streamingtext format /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO/IEC 15444-4 2004 Information technology - JPEG 2000 image coding system: Conformancetesting /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ISO/IEC TR 13818-5 2005 Information technology - Generic coding of moving pictures andassociated audio information - P.5: Software simulation /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.

ISO/IEC TR 14496-7 2004 Information technology - Coding of audio-visual objects - P.7: Optimizedreference software for coding of audio-visual objects /By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2004.


COKE ISO

ISO 8005 2005 Carbonaceous materials used in the production of aluminium - Green and calcinedcoke - Determination of ash content /By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2005.


COKE ASH DETERMIATION ISO

ISO 8005 2005 Carbonaceous materials used in the production of aluminium - Green and calcined coke -Determination of ash content /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

COMMUNICATION EQUIPMENT BSI BS EN 55022 2006 Information technology equipment - Radio disturbance characteristics - Limits

and methods of measurement /By British Standards Institution (BSI). London: BSI, 2006.

COMPUTER-COMPUTER COMMUNICATIONS ISO ISO/IEC 14165-114 2005 Information technology - Fibre Channel - P.114: 100 MB/s balanced

copper physical interface (FC-100-DF-EL-S) /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

COMPUTER SOFTWARE ISO


CONCRETES ISO ISO 14657 2005 Zinc-coated steel for the reinforcement of concrete /By International Organization

for Standardization (ISO). Geneva: ISO, 2005.


CONSTRUCTION EQUIPMENT ISO

ISO 8686-4 2005 Cranes - Design principles for loads and load combinations - P.4: Jib cranes /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/TR 25599 2005 Cranes - Jib cranes - International Standards for design, manufacturing, useand maintenance requirements and recommendations /By International Organization for Standardization(ISO). Geneva: ISO, 2005.

CONSTRUCTION MATERIALS ISO

ISO 13910 2005 Structural timber - Characteristic values of strength-graded timber - Sampling, full-size testing and evaluation /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

COPPER INORGANIC COMPOUNDS AWWA

ANSI/AWWA B602 2002 Copper sulfate /By American Water Works Association (AWWA). Denver:AWWA, 2002.

CORROSION ISO




ISO 16151 2005 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidifiedsalt spray, "dry" and "wet" conditions /By International Organization for Standardization (ISO). Geneva: ISO,2005.


CORROSION TESTS ISO




ISO 16151 2005 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidifiedsalt spray, "dry" and "wet" conditions /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

COUNTERSINKS ISO

ISO 15065 2005 Countersinks for countersunk head screws with head configuration in accordancewith ISO 7721 /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

CRANES ISO ISO 8686-4 2005 Cranes - Design principles for loads and load combinations - P.4: Jib cranes /By

International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 14518 2005 Cranes - Requirements for test loads /By International Organization for

Standardization (ISO). Geneva: ISO, 2005. ISO/TR 25599 2005 Cranes - Jib cranes - International Standards for design, manufacturing, use

and maintenance requirements and recommendations /By International Organization for Standardization(ISO). Geneva: ISO, 2005.

CRUSHING TESTS JSA JIS Z2507 2000 Sintered metal bearing - Determination of radial crushing strength /By Japanese

Standards Association (JSA). Tokyo: JSA, 2000.


DAIRY PRODUCTS ISO ISO 7238 2004 Butter - Determination of pH of the serum - Potentiometric method /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004. ISO 14674 2005 Milk and milk powder - Determination of aflatoxin M1 content - Clean-up by

immunoaffinity chromatography and determination by thin-layer chromatography /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

DAMPERS (AIR CONDITIONING) ISO

ISO 10294-5 2005 Fire resistance tests - Fire dampers for air distribution systems - P.5: Intumescentfire dampers /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

DECORATIVE MATERIALS ISO

ISO 13894-2 2005 High-pressure decorative laminates - Composite elements - P.2: Specificationsfor composite elements with wood-based substrates for interior use /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

DEFECTS ISO ISO 7482-3 2005 Raw goat skins - P.3: Guidelines for grading on the basis of defects /By

International Organization for Standardization (ISO). Geneva: ISO, 2005.

DENSITY MEASUREMENT JSA JIS Z2501 2000 Sintered metal materials - Determination of density, oil content and open porosity

/By Japanese Standards Association (JSA). Tokyo: JSA, 2000. JIS Z2504 2000 Metallic powders - Determination of apparent density - Funnel method /By Japanese


DENTAL MATERIALS ISO

ISO 15841 2006 Dentistry - Wires for use in orthodontics /By International Organization forStandardization (ISO). Geneva: ISO, 2006.


DENTISTRY ISO

ISO 15841 2006 Dentistry - Wires for use in orthodontics /By International Organization forStandardization (ISO). Geneva: ISO, 2006.

DETERMINATION OF CONTENT ISO ISO 13899-2 2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively

coupled plasma atomic emission spectrometric method - P.2: Determination of Nb content /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.


DIAGRAMS ISO ISO 14617-1 2005 Graphical symbols for diagrams - P.1: General information and indexes /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 14617-13 2004 Graphical symbols for diagrams - P.13: Devices for material processing /By

International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 14617-14 2004 Graphical symbols for diagrams - P.14: Devices for transport and handling of

material /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

DIMENSIONS ISO

ISO 15228 2005 Textile machinery and accessories - Profile reeds for air jet weaving machines -Dimensions /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

DOORS ISO

ISO 8271 2005 Door leaves - Determination of the resistance to hard body impact /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 9379 2005 Operating forces - Test method - Doors /By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2005.


ISO 9381 2005 Hinged or pivoted doors - Determination of the resistance to static torsion /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

DOUBLING (TEXTILES) ISO

ISO 9947 2005 Textile machinery and accessories - Two-for-one twisters - Vocabulary /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

DRUGS - LAW AND LEGISLATION U.S.Government Printing Office

CFR 21 2006 Code of Federal Regulations - Title 21 - Food and Drugs /By Office of the FederalRegister. Washington DC: U.S.Government Printing Office 2005.

DUCTILITY - METAL COATINGS AWWA

ANSI/AWWA C105/A21.5 2005 Polyethylene encasement for ductile-iron pipe systems /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

EARTH-MOVING EQUIPMENT ISO

ISO 6683 2005 Earth-moving machinery - Seat belts and seat belt anchorages - Performancerequirements and tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ELECTRODES ISO


ELECTROMAGNETIC COMPATIBILITY (EMC) IEC

IEC 61000-4-12 2006 Electromagnetic compatibility (EMC) - P.4-12: Testing and measurementtechniques - Ring wave immunity test /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2006.


ELECTROMAGNETISM IEC IEC 61000-4-12 2006 Electromagnetic compatibility (EMC) - P.4-12: Testing and measurement

techniques - Ring wave immunity test /By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2006.

EMERGENCY PREPAREDNESS ISO

IWA 5 2006 Emergency preparedness /By International Organization for Standardization (ISO).Geneva: ISO, 2006.

ENVIRONMENTAL ENGINEERING ISO

ISO 14025 2006 Environmental labels and declarations - Type III environmental declarations -Principles and procedures /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ERGONOMICS ISO ISO 15006 2004 Road vehicles - Ergonomic aspects of transport information and control systems -

Specifications and compliance procedures for in-vehicle auditory presentation /By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.

ISO 15536-1 2005 Ergonomics - Computer manikins and body templates - P.1: Generalrequirements /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 15537 2004 Principles for selecting and using test persons for testing anthropometric aspectsof industrial products and designs /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

ESSENTIAL OILS ISO ISO 8900 2005 Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)] /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

FAT CONTENT DETERMINATION JSA JIS Z2501 2000 Sintered metal materials - Determination of density, oil content and open porosity

/By Japanese Standards Association (JSA). Tokyo: JSA, 2000.


FERRIC INORGANIC COMPOUNDS AWWA ANSI/AWWA B406 2006 Ferric sulfate /By American Water Works Association (AWWA) and

American National Standards Institute (ANSI). Denver: AWWA, 2006. ANSI/AWWA B407 2005 Liquid ferric chloride /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2005.

FIBRE ROPES ISO

ISO 9554 2005 Fibre ropes - General specifications /By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2005.

FILTERS AWWA ANSI/AWWA B100 2001 Granular filter material /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2001. ANSI/AWWA B101 2001 Precoat filter media /By American Water Works Association (AWWA) and

American National Standards Institute (ANSI). Denver: AWWA, 2001. ANSI/AWWA B102 2004 Manganese greensand for filters /By American Water Works Association

(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2004.

FILTERS (OPTICAL) JSA


FIRE DAMPERS ISO


FIRE SAFETY ISO



FISHING NETS ISO

ISO 1530 2003 Fishing nets - Description and designation of knotted netting /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.

FITTING - PIPES AWWA ANSI/AWWA C153/A21.53 2006 Ductile-iron compact fittings for water service /By American Water

Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2006.

FLANGES ISO ISO 15590-3 2004 Petroleum and natural gas industries - Induction bends, fittings and flanges for

pipeline transportation systems - P.3: Flanges /By International Organization for Standardization (ISO).Geneva: ISO, 2004.

FLOWMETER JSA JIS Z2502 2000 Metallic powders - Determination of flowability by means of a calibrated funnel (Hall

flowmeter) /By Japanese Standards Association (JSA). Tokyo: JSA, 2000.

FLUIDIZATION JSA JIS Z2502 2000 Metallic powders - Determination of flowability by means of a calibrated funnel (Hall

flowmeter) /By Japanese Standards Association (JSA). Tokyo: JSA, 2000.

FLUOROSILICIC ACID AWWA

ANSI/AWWA B703 2006 Fluorosilicate acid /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

FOOD - LAW AND LEGISLATION U.S.Government Printing Office

CFR 21 2006 Code of Federal Regulations - Title 21 - Food and Drugs /By Office of the FederalRegister. Washington DC: U.S.Government Printing Office 2005.


FOOD PRODUCTS ISO ISO 6561-1 2005 Fruits, vegetables and derived products - Determination of cadmium content -



FRUITS ISO ISO 6561-1 2005 Fruits, vegetables and derived products - Determination of cadmium content -



FUELS ISO ISO 8216-1 2005 Petroleum products - Fuels (class F) classification - P.1: Categories of marine

fuels /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005. ISO 8217 2005 Petroleum products - Fuels (class F) - Specifications of marine fuels /By International

Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2005. ISO 15239 2005 Solid mineral fuels - Evaluation of the measurement performance of on-line

analysers /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

FUNNELS JSA JIS Z2504 2000 Metallic powders - Determination of apparent density - Funnel method /By Japanese


GAS CYLINDERS ISO ISO 10460 2005 Gas cylinders - Welded carbon-steel gas cylinders - Periodic inspection and testing

/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.


ISO 10461 2005 Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection andtesting /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

JSA

JIS B8230 1989 Small type seamless steel gas cylinders /By Japanese Standards Association(JSA). Tokyo: JSA, 1989.

GAS-WELDING EQUIPMENT ISO

ISO 15296 2004 Gas welding equipment - Vocabulary - Terms used for gas welding equipment /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.

GEARS ISO

ISO 14635-3 2005 Gears - FZG test procedures - P.3: FZG test method A/2,8/50 for relative scuffingload-carrying capacity and wear characteristics of semifluid gear greases /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

GEOSYNTHETICS ISO

ISO 10318 2005 Geosynthetics - Terms and definitions /By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 13428 2005 Geosynthetics - Determination of the protection efficiency of a geosynthetic againstimpact damage /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

GEOTEXTILES ISO

ISO 10318 2005 Geosynthetics - Terms and definitions /By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 13426-2 2005 Geotextiles and geotextile-related products - Strength of internal structuraljunctions - P.2: Geocomposites /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 13428 2005 Geosynthetics - Determination of the protection efficiency of a geosynthetic againstimpact damage /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


GRANULAR MATERIALS AWWA ANSI/AWWA B100 2001 Granular filter material /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2001.

GRAPHIC DISPLAYS ISO

ISO 15930-1 2001 Graphic technology - Prepress digital data exchange - Use of PDF - P.1:Complete exchange using CMYK data (PDF/X-1 and PDF/X-1a) /By International Organization forStandardization (ISO). Geneva: ISO, 2001.

GRAPHIC REPRESENTATION ISO ISO 14617-1 2005 Graphical symbols for diagrams - P.1: General information and indexes /By




GRAPHIC SYMBOLS ISO ISO 14617-1 2005 Graphical symbols for diagrams - P.1: General information and indexes /By




GRAPHIC TECHNOLOGY ISO

ISO 2834-1 2006 Graphic technology - Laboratory preparation of test prints - P.1: Paste inks /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 12637-1 2006 Graphic technology - Vocabulary - P.1: Fundamental terms /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2006.


ISO 15930-1 2001 Graphic technology - Prepress digital data exchange - Use of PDF - P.1:Complete exchange using CMYK data (PDF/X-1 and PDF/X-1a) /By International Organization forStandardization (ISO). Geneva: ISO, 2001.

HARDMETALS ISO

ISO 11873 2005 Hardmetals - Determination of sulfur and carbon contents in cobalt metal powders -Infrared detection method /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

HEXAMETAPHOSPHATE AWWA

ANSI/AWWA B502 2005 Sodium polyphosphate, glassy (sodium hexametaphosphate) /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

HIGH-TENSILE STEELS ISO

ISO 14590 2005 Cold-reduced steel sheet of high tensile strength and low yield point with improvedformability /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

HYDRATES AWWA

ANSI/AWWA B202 2002 Quicklime and hydrated lime /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002.

HYDROMETRY ISO

ISO/TS 24154 2005 Hydrometry - Measuring river velocity and discharge with acoustic Dopplerprofilers /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

HYDROXIDES AWWA

ANSI/AWWA B511 2005 Potassium hydroxide /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.


HYPOCHLORITES AWWA ANSI/AWWA B300 2004 Hypochlorites /By American Water Works Association (AWWA) and


IDENTIFICATION METHODS ISO ISO 9564-2 2005 Banking - Personal ldentification Number management and security - P.2:


ISO/IEC TR 24710 2005 Information technology - Radio frequency identification for itemmanagement - Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

IDENTITY CARDS ISO ISO/IEC 7501-1 2005 Identification cards - Machine readable travel documents - P.1: Machine

readable passport /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.

INFORMATION EXCHANGE ISO ISO/IEC TR 11802-1 2005 Information technology - Telecommunications and information exchange

between systems - Local and metropolitan area networks - Technical reports and guidelines - P.1: Thestructure and coding of Logical Link Control addresses in Local Area Networks /By International Organizationfor Standardization (ISO). 4th ed. Geneva: ISO, 2005.

ISO/IEC TR 11802-2 2005 Information technology - Telecommunications and information exchangebetween systems - Local and metropolitan area networks - Technical reports and guidelines - P.2: StandardGroup MAC Addresses /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2005.

INFORMATION TECHNOLOGY ISO ISO/IEC TR 11802-1 2005 Information technology - Telecommunications and information exchange

between systems - Local and metropolitan area networks - Technical reports and guidelines - P.1: Thestructure and coding of Logical Link Control addresses in Local Area Networks /By International Organizationfor Standardization (ISO). 4th ed. Geneva: ISO, 2005.




ISO/IEC 14165-114 2005 Information technology - Fibre Channel - P.114: 100 MB/s balancedcopper physical interface (FC-100-DF-EL-S) /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

ISO/IEC 14165-241 2005 Information technology - Fibre channel - P.241: Backbone 2 (FC-BB-2) /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC TR 14496-7 2004 Information technology - Coding of audio-visual objects - P.7: Optimizedreference software for coding of audio-visual objects /By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2004.

ISO/IEC 14496-17 2006 Information technology - Coding of audio-visual objects - P.17: Streamingtext format /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO/IEC 15434 2005 Information technology - Syntax for high-capacity automatic data capture (ADC)media /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO/IEC TR 15443-1 2005 Information technology - Security techniques - A framework for IT securityassurance - P.1: Overview and framework /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/IEC 15444-4 2004 Information technology - JPEG 2000 image coding system: Conformancetesting /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.


INTERFACES (DATA PROCESSING) ISO

ISO/IEC 14165-114 2005 Information technology - Fibre Channel - P.114: 100 MB/s balancedcopper physical interface (FC-100-DF-EL-S) /By International Organization for Standardization (ISO).Geneva: ISO, 2005.


ISOPRENE RUBBER ISO

ISO 7663 2005 Halogenated isobutene-isoprene rubber (BIIR and CIIR) - Evaluation procedures /ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.

JIB CRANES ISO

ISO 8686-4 2005 Cranes - Design principles for loads and load combinations - P.4: Jib cranes /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO/TR 25599 2005 Cranes - Jib cranes - International Standards for design, manufacturing, useand maintenance requirements and recommendations /By International Organization for Standardization(ISO). Geneva: ISO, 2005.

KNITTING MACHINERY ISO

ISO 11675 2005 Textile machinery and accessories - Flatbed knitting machines - Vocabulary /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

LABOR AND LABORING U.S. Government Printing Office

CFR 29 2005 Code of Federal Regulations - Title 29 - Labor /By Office of the Federal Register.Washington DC.: U.S. Government Printing Office, 2005.

LABOR - LAW AND LEGISLATION U.S. Government Printing Office

CFR 29 2005 Code of Federal Regulations - Title 29 - Labor /By Office of the Federal Register.Washington DC.: U.S. Government Printing Office, 2005.

LAMINATES ISO

ISO 13894-2 2005 High-pressure decorative laminates - Composite elements - P.2: Specificationsfor composite elements with wood-based substrates for interior use /By International Organization forStandardization (ISO). Geneva: ISO, 2005.


LASERS ISO

ISO 14408 2005 Tracheal tubes designed for laser surgery - Requirements for marking andaccompanying information /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 15367-2 2005 Lasers and laser-related equipment - Test methods for determination of theshape of a laser beam wavefront - P.2: Shack-Hartmann sensors /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

ISO 22827-1 2005 Acceptance tests for Nd: YAG laser beam welding machines - Machines withoptical fibre delivery - P.1: Laser assembly /By International Organization for Standardization (ISO). Geneva:ISO, 2005.

ISO 22827-2 2005 Acceptance tests for Nd: YAG laser beam welding machines - Machines withoptical fibre delivery - P.2: Moving mechanism /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

LATIN CHARACTERS ISO

ISO 11940-2 2007 Information and documentation - Transliteration of Thai characters into Latincharacters - P.2: Simplified transcription of Thai language /By International Organization for Standardization(ISO). Geneva: ISO, 2007.

LEATHER ISO

ISO 14931 2004 Leather - Guide to the selection of leather for apparel (excluding furs) /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.

LIME AWWA ANSI/AWWA B202 2002 Quicklime and hydrated lime /By American Water Works Association


MACHINE-READABLE MATERIALS ISO ISO/IEC 7501-1 2005 Identification cards - Machine readable travel documents - P.1: Machine

readable passport /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.


MANAGEMENT TECHNIQUES SAA AS/NZS 4360 2004 Risk management /By Standards Australia (SAA). New South Wales: SAA,

2004.

MANGANESE AWWA ANSI/AWWA B102 2004 Manganese greensand for filters /By American Water Works Association


MARINE SAFETY ISO ISO 12402-9 2006 Personal flotation devices - P.9: Test methods /By International Organization for

Standardization (ISO). Geneva: ISO, 2006. ISO 24408 2005 Ships and marine technology - Position-indicating lights for life-saving appliances -

Testing, inspection and marking of production units /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

MARKING ISO

ISO 14408 2005 Tracheal tubes designed for laser surgery - Requirements for marking andaccompanying information /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

MEDICAL EQUIPMENT ISO ISO 14971 2007 Medical devices - Application of risk management to medical devices /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007. ISO 15375 2004 Hanging devices for multiple use with infusion bottles - Requirements and test

methods /By International Organization for Standardization (ISO). Geneva: ISO, 2004.

METAL COATINGS ISO ISO 17925 2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass per

unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometryand flame atomic absorption spectrometry /By International Organization for Standardization (ISO). Geneva: ISO, 2004.


METALS ISO




ISO 16151 2005 Corrosion of metals and alloys - Accelerated cyclic tests with exposure to acidifiedsalt spray, "dry" and "wet" conditions /By International Organization for Standardization (ISO). Geneva: ISO,2005.

MILK ISO

ISO 8870 2006 Milk and milk-based products - Detection of thermonuclease produced by coagulase-positive staphylococci /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 11816-1 2006 Milk and milk products - Determination of alkaline phosphatase activity - P.1:Fluorimetric method for milk and milk-based drinks /By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2006.

ISO 13875 2005 Liquid milk - Determination of acid-soluble β-lactoglobulin content - Reverse-phaseHPLC method /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 14674 2005 Milk and milk powder - Determination of aflatoxin M1 content - Clean-up byimmunoaffinity chromatography and determination by thin-layer chromatography /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

MOLYBDENUM ISO

ISO 13899-2 2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductivelycoupled plasma atomic emission spectrometric method - P.2: Determination of Nb content /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.



MOVING PICTURES ISO


NATURAL GAS ISO

ISO 15590-3 2004 Petroleum and natural gas industries - Induction bends, fittings and flanges forpipeline transportation systems - P.3: Flanges /By International Organization for Standardization (ISO).Geneva: ISO, 2004.

NICKEL BSI

BS EN 12472 2005 Method for the simulation of wear and corrosion for the detection of nickelrelease from coated items /By British Standards Institution (BSI). London: BSI, 2005.

NUCLEAR FUELS ISO

ISO 12183 2005 Nuclear fuel technology - Controlled-potential coulometric assay of plutonium /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

OCCUPATIONAL SAFETY SAA

AS/NZS 4360 2004 Risk management /By Standards Australia (SAA). New South Wales: SAA, 2004.

OPTICAL INSTRUMENTS ISO

ISO 12858-3 2005 Optics and optical instruments - Ancillary devices for geodetic instruments - P.3:Tribrachs /By International Organization for Standardization (ISO). Geneva: ISO, 2005.


ISO/TR 14999-1 2005 Optics and photonics - Interferometric measurement of optical elements andoptical systems - P.1: Terms, definitions and fundamental relationships /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

ISO/TR 14999-3 2005 Optics and photonics - Interferometric measurement of optical elements andoptical systems - P.3: Calibration and validation of interferometric test equipment and measurements /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

OPTICS ISO

ISO/TR 14999-1 2005 Optics and photonics - Interferometric measurement of optical elements andoptical systems - P.1: Terms, definitions and fundamental relationships /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

ISO/TR 14999-3 2005 Optics and photonics - Interferometric measurement of optical elements andoptical systems - P.3: Calibration and validation of interferometric test equipment and measurements /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

OSCILLATIONS IEC IEC 61000-4-12 2006 Electromagnetic compatibility (EMC) - P.4-12: Testing and measurement

techniques - Ring wave immunity test /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2006.

OXYGEN AWWA

ANSI/AWWA B304 2005 Liquid oxygen for ozone generation /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

PAPER ISO ISO/TR 24498 2006 Paper, board and pulps - Estimation of uncertainty for test methods /By


PAPER PULP ISO ISO/TR 24498 2006 Paper, board and pulps - Estimation of uncertainty for test methods /By



PARTICULATE MATERIALS JSA JIS Z2502 2000 Metallic powders - Determination of flowability by means of a calibrated funnel (Hall

flowmeter) /By Japanese Standards Association (JSA). Tokyo: JSA, 2000. JIS Z2503 2000 Powders for powder metallurgical purposes - Sampling /By Japanese Standards

Association (JSA). Tokyo: JSA, 2000. JIS Z2504 2000 Metallic powders - Determination of apparent density - Funnel method /By Japanese


PARTICULATE MATERIALS - SAMPLING METHODS JSA

JIS Z2503 2000 Powders for powder metallurgical purposes - Sampling /By Japanese StandardsAssociation (JSA). Tokyo: JSA, 2000.

PENETRATION TESTS ISO

ISO 6530 2005 Protective clothing - Protection against liquid chemicals - Test method for resistanceof materials to penetration by liquids /By International Organization for Standardization (ISO). 3rd ed.Geneva: ISO, 2005.

PERFORMANCE TESTING ISO ISO 6683 2005 Earth-moving machinery - Seat belts and seat belt anchorages - Performance

requirements and tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

PERMANGANATE NUMBER AWWA ANSI/AWWA B603 2003 Permanganates /By American Water Works Association (AWWA). Denver:

AWWA, 2003.

PETROLEUM TECHNOLOGY ISO ISO 15590-3 2004 Petroleum and natural gas industries - Induction bends, fittings and flanges for



PHOSPHATES AWWA

ANSI/AWWA B502 2005 Sodium polyphosphate, glassy (sodium hexametaphosphate) /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA B503 2005 Sodium tripolyphosphate /By American Water Works Association (AWWA)and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA B504 2005 Monosodium phosphate, anhydrous /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA B505 2005 Disodium phosphate, anhydrous /By American Water Works Association(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

ANSI/AWWA B506 2006 Zinc orthophosphate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

PHOTOGRAPHIC LENSES JSA


PHOTOGRAPHY ISO

ISO 12231 2005 Photography - Electronic still picture imaging - Vocabulary /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

PIPE FITTINGS AWWA ANSI/AWWA C104/A21.4 2003 Cement-motar lining for ductile-iron pipe and fittings for water /By


PIPE FITTINGS - CONCRETES AWWA

ANSI/AWWA C104/A21.4 2003 Cement-motar lining for ductile-iron pipe and fittings for water /ByAmerican Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver:AWWA, 2003.


PIPELINE TRANSPORTATION ISO ISO 15590-3 2004 Petroleum and natural gas industries - Induction bends, fittings and flanges for


PIPELINES AWWA ANSI/AWWA C203 2002 Coal-tar protective coatings and linings for steel water pipelines - Enamel

and tape - Hot applied /By American Water Works Association (AWWA) and American National StandardsInstitute (ANSI). Denver: AWWA, 2002.

PIPES AWWA ANSI/AWWA C150/A21.50 2002 Thickness design of ductile-iron pipe /By American Water Works

Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002. ANSI/AWWA C151/A21.51 2002 Ductile-iron pipe, centrifugally cast, for water /By American Water


ISO

ISO 11673 2005 Unplasticized poly (vinyi chloride) (PVC-U) pressure pipes - Determination of thefracture toughness properties /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

PIPES - CAST-IRON AWWA ANSI/AWWA C150/A21.50 2002 Thickness design of ductile-iron pipe /By American Water Works

Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2002. ANSI/AWWA C151/A21.51 2002 Ductile-iron pipe, centrifugally cast, for water /By American Water


PLASTICS ISO

ISO 15063 2004 Plastics - Polyols for use in the production of polyurethanes - Determination ofhydroxyl number by NIR spectroscopy /By International Organization for Standardization (ISO). Geneva: ISO,2004.


ISO 15314 2004 Plastics - Methods for marine exposure /By International Organization forStandardization (ISO). Geneva: ISO, 2004.

POLYACRYLATES AWWA

ANSI/AWWA B453 2006 Polyacrylamide /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

POLYAMIDES AWWA

ANSI/AWWA B452 2006 EPI-DMA polyamines /By American Water Works Association (AWWA).Denver: AWWA, 2006.

POLYETHYLENE - PIPES AWWA

ANSI/AWWA C105/A21.5 2005 Polyethylene encasement for ductile-iron pipe systems /By AmericanWater Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005.

POLYURETHANE ISO

ISO 15063 2004 Plastics - Polyols for use in the production of polyurethanes - Determination ofhydroxyl number by NIR spectroscopy /By International Organization for Standardization (ISO). Geneva: ISO,2004.

POROSITY MEASUREMENT JSA

JIS Z2501 2000 Sintered metal materials - Determination of density, oil content and open porosity/By Japanese Standards Association (JSA). Tokyo: JSA, 2000.

POTASSIUM INORGANIC COMPOUNDS AWWA

ANSI/AWWA B511 2005 Potassium hydroxide /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.


POWDER METALLURGY JSA

JIS Z2503 2000 Powders for powder metallurgical purposes - Sampling /By Japanese StandardsAssociation (JSA). Tokyo: JSA, 2000.

PRINTING INKS ISO

ISO 2834-1 2006 Graphic technology - Laboratory preparation of test prints - P.1: Paste inks /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2006.

PROCESS CONTROL ISO

ISO 23570-1 2005 Industrial automation systems and integration - Distributed installation in industrialapplications - P.1: Sensors and actuators /By International Organization for Standardization (ISO). Geneva:ISO, 2005.

ISO 23570-2 2005 Industrial automation systems and integration - Distributed installation in industrialapplications - P.2: Hybrid communication bus /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

PROTECTIVE CLOTHING ISO

ISO 6530 2005 Protective clothing - Protection against liquid chemicals - Test method for resistanceof materials to penetration by liquids /By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2005.


PROTECTIVE COATINGS AWWA



RADIO DISTURBANCES BSI

BS EN 55022 2006 Information technology equipment - Radio disturbance characteristics - Limitsand methods of measurement /By British Standards Institution (BSI). London: BSI, 2006.

RADIOCOMMUNICATION AFNOR

NF Z83-506 1996 European digital cellular telecommunications system (Phase 2) Security aspects(GSM 02.09) /By Association Française de Normalisation (AFNOR). Paris: AFNOR, 1996.

RADIOFREQUENCIES ISO


RISK MANAGEMENT ISO

ISO 14971 2007 Medical devices - Application of risk management to medical devices /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2007.

SAA

AS/NZS 4360 2004 Risk management /By Standards Australia (SAA). New South Wales: SAA,2004.

ROAD TRANSPORT ISO

ISO 14815 2005 Road transport and traffic telematics - Automatic vehicle and equipmentidentification - System specifications /By International Organization for Standardization (ISO). Geneva: ISO,2005.

ISO/TS 14907-1 2005 Road transport and traffic telematice - Electronic fee collection - Testprocedures for user and fixed equipement - P.1: Description of test procedures /By International Organizationfor Standardization (ISO). Geneva: ISO, 2005.


ROAD VEHICLE ENGINEERING ISO

ISO 14815 2005 Road transport and traffic telematics - Automatic vehicle and equipmentidentification - System specifications /By International Organization for Standardization (ISO). Geneva: ISO,2005.


ROAD VEHICLES ISO

ISO 14400 2005 Road vehicles - Wheels and rims - Use, general maintenance and safetyrequirements and out-of-service conditions /By International Organization for Standardization (ISO). Geneva:ISO, 2005.

ISO 15006 2004 Road vehicles - Ergonomic aspects of transport information and control systems -Specifications and compliance procedures for in-vehicle auditory presentation /By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.

ISO 15172 2005 Road vehicles - Wheels - Nut seat strength tests /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

SAFETY DEVICES ISO

ISO 6683 2005 Earth-moving machinery - Seat belts and seat belt anchorages - Performancerequirements and tests /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.


SAMPLING METHODS ISO

ISO 13448-1 2005 Acceptance sampling procedures based on the allocation of priorities principle(APP) - P.1: Guidelines for the APP approach /By International Organization for Standardization (ISO).Geneva: ISO, 2005.


SAWN TIMBER ISO ISO 13912 2005 Structural timber - Machine stength grading - Basic principles /By International

Organization for Standardization (ISO). Geneva: ISO, 2005.

SEAMS ISO

ISO 13936-3 2005 Textiles - Determination of the slippage resistance of yarns at a seam in wovenfabrics - P.3: Needle clamp method /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SECURITY TECHNIQUES ISO ISO 9564-2 2005 Banking - Personal ldentification Number management and security - P.2:


ISO 13491-2 2005 Banking - Secure cryptographic devices (retail) - P.2: Security compliancechecklists for devices used in financial transactions /By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2005.

ISO/IEC TR 15443-1 2005 Information technology - Security techniques - A framework for IT securityassurance - P.1: Overview and framework /By International Organization for Standardization (ISO). Geneva:ISO, 2005.

ISO/PAS 28003 2006 Security management systems for the supply chain - Requirements for bodiesproviding audit and certification of supply chain security management systems /By International Organizationfor Standardization (ISO). Geneva: ISO, 2006.

SILICATES AWWA ANSI/AWWA B404 2003 Liquid sodium silicate /By American Water Works Association (AWWA) and


SINTERED PRODUCTS JSA JIS Z2501 2000 Sintered metal materials - Determination of density, oil content and open porosity

/By Japanese Standards Association (JSA). Tokyo: JSA, 2000.


JIS Z2507 2000 Sintered metal bearing - Determination of radial crushing strength /By JapaneseStandards Association (JSA). Tokyo: JSA, 2000.

SKIING EQUIPMENT ISO

ISO 15344 2005 Snowboard step-in bindings - Requirements and test methods /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

SKIN (BODY) - GOATS ISO

ISO 7482-3 2005 Raw goat skins - P.3: Guidelines for grading on the basis of defects /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

SODIUM AWWA

ANSI/AWWA B404 2003 Liquid sodium silicate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2003.

ANSI/AWWA B405 2000 Sodium aluminate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2000.

SODIUM CHLORIDE AWWA

ANSI/AWWA B200 2003 Sodium chloride /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2003.

ANSI/AWWA B303 2005 Sodium chlorite /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.

SODIUM FLUORIDE AWWA

ANSI/AWWA B701 2006 Sodium fluoride /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

ANSI/AWWA B702 2006 Sodium fluorosilicate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.


SODIUM FLUOROSILICATES AWWA

ANSI/AWWA B702 2006 Sodium fluorosilicate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

SODIUM HYDROXIDE AWWA AWWA B501 2003 Sodium hydroxide (caustic soda) /By American Water Works Association


SODIUM INORGANIC COMPOUNDS AWWA ANSI/AWWA B502 2005 Sodium polyphosphate, glassy (sodium hexametaphosphate) /By American

Water Works Association (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005. ANSI/AWWA B503 2005 Sodium tripolyphosphate /By American Water Works Association (AWWA)

and American National Standards Institute (ANSI). Denver: AWWA, 2005. ANSI/AWWA B504 2005 Monosodium phosphate, anhydrous /By American Water Works Association

(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005. ANSI/AWWA B505 2005 Disodium phosphate, anhydrous /By American Water Works Association

(AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2005. ANSI/AWWA B601 2005 Sodium metabisulfite /By American Water Works Association (AWWA) and

American National Standards Institute (ANSI). Denver: AWWA, 2005. ANSI/AWWA B701 2006 Sodium fluoride /By American Water Works Association (AWWA) and


SODIUM ORGANIC COMPOUNDS AWWA ANSI/AWWA B702 2006 Sodium fluorosilicate /By American Water Works Association (AWWA) and


SOILS ISO ISO 14154 2005 Soil quality - Determination of some selected chlorophenols - Gas-chromatographic

method with electron-capture detection /By International Organization for Standardization (ISO). Geneva:ISO, 2005.


ISO 14256-2 2005 Soil quality - Determination of nitrate, nitrite and ammonium in field-moist soils byextraction with potassium chloride solution - P.2: Automated method with segmented flow analysis /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 23753-2 2005 Soil quality - Determination of dehydrogenase activity in soils - P.2: Method usingiodotetrazolium chloride (INT) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SOILS - QUALITY ISO ISO 14154 2005 Soil quality - Determination of some selected chlorophenols - Gas-chromatographic

method with electron-capture detection /By International Organization for Standardization (ISO). Geneva:ISO, 2005.

ISO 14256-2 2005 Soil quality - Determination of nitrate, nitrite and ammonium in field-moist soils byextraction with potassium chloride solution - P.2: Automated method with segmented flow analysis /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 23753-2 2005 Soil quality - Determination of dehydrogenase activity in soils - P.2: Method usingiodotetrazolium chloride (INT) /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SOLID FUELS ISO ISO 15239 2005 Solid mineral fuels - Evaluation of the measurement performance of on-line

analysers /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SPACE TECHNOLOGY ISO ISO 14620-3 2005 Space systems - Safety requirements - P.3: Flight safety systems /By

International Organization for Standardization (ISO). Geneva: ISO, 2005. ISO 14624-3 2005 Space systems - Safety and compatibility of materials - P.3: Determination of

offgassed products from materials and assembled articles /By International Organization for Standardization(ISO). Geneva: ISO, 2005.

ISO 14954 2005 Space systems - Dynamic and static analysis - Exchange of mathematical models/By International Organization for Standardization (ISO). Geneva: ISO, 2005.

SPORTS EQUIPMENT ISO ISO 14790 2005 Snowboard plate-bindings without a release mechanism - Requirements and test

methods /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.


SPRAYING (COATING) ISO

ISO 14924 2005 Thermal spraying - Post-treatment and finishing of thermally sprayed coatings /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2005.

SPRAYING EQUIPMENT (AGRICULTURE) ISO

ISO 14131 2005 Agricultural sprayers - Boom steadiness - Test methods /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

STEEL PIPES AWWA

ANSI/AWWA C200 1997 Steel water pipe - 6 in. (150 mm) and larger /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 1997.

STEELS ISO ISO 8502-11 2006 Preparation of steel substrates before application of paints and related products -

Tests for the assessment of surface cleanliness - P.11: Field method for the turbidimetric determination ofwater-soluble sulfate /By International Organization for Standardization (ISO). Geneva: ISO, 2006.

ISO 14657 2005 Zinc-coated steel for the reinforcement of concrete /By International Organizationfor Standardization (ISO). Geneva: ISO, 2005.

ISO 14788 2005 Continuous hot-dip zinc-5% aluminium alloy coated steel sheet /By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 17925 2004 Zinc and/or aluminium based coatings on steel - Determination of coating mass perunit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometryand flame atomic absorption spectrometry /By International Organization for Standardization (ISO). Geneva:ISO, 2004.

STEELS - SURFACE TREATMENT ISO

ISO 8502-11 2006 Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - P.11: Field method for the turbidimetric determination ofwater-soluble sulfate /By International Organization for Standardization (ISO). Geneva: ISO, 2006.


STRUCTURAL TIMBER ISO

ISO 13910 2005 Structural timber - Characteristic values of strength-graded timber - Sampling, full-size testing and evaluation /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

ISO 13912 2005 Structural timber - Machine stength grading - Basic principles /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

SULFATES AWWA

ANSI/AWWA B402 2000 Ferrous sulfate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2000.

ANSI/AWWA B403 2003 Aluminium sulfate - Liquid, ground, or lump /By American Water WorksAssociation (AWWA) and American National Standards Institute (ANSI). Denver: AWWA, 2003.

ANSI/AWWA B406 2006 Ferric sulfate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.

ANSI/AWWA B602 2002 Copper sulfate /By American Water Works Association (AWWA). Denver:AWWA, 2002.

SULPHIDES AWWA

ANSI/AWWA B601 2005 Sodium metabisulfite /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2005.

SULPHUR DIOXIDE AWWA

ANSI/AWWA B512 2002 Sulfur dioxide /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2002.

SYNTAX - TRANSFER FUNCTIONS ISO

ISO/IEC 15434 2005 Information technology - Syntax for high-capacity automatic data capture (ADC)media /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.


TELECOMMUNICATION ISO

ISO/IEC TR 11802-1 2005 Information technology - Telecommunications and information exchangebetween systems - Local and metropolitan area networks - Technical reports and guidelines - P.1: Thestructure and coding of Logical Link Control addresses in Local Area Networks /By International Organizationfor Standardization (ISO). 4th ed. Geneva: ISO, 2005.


TELECOMMUNICATION - LAW AND LEGISLATION Government Printing Office

CFR 47 2005 Code of Federal regulations - Title 47 - Telecommunication /By Office of the FederalRegister. Washington DC.: Government Printing Office, 2005.

TELECOMMUNICATION SYSTEMS AFNOR

NF Z83-506 1996 European digital cellular telecommunications system (Phase 2) Security aspects(GSM 02.09) /By Association Française de Normalisation (AFNOR). Paris: AFNOR, 1996.

TESTING ISO

ISO 7768 2006 Textiles - Test method for assessing the smoothness appearance of fabrics aftercleansing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 7769 2006 Textiles - Test method for assessing the appearance of creases in fabrics aftercleansing /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006.

ISO 7770 2006 Textiles - Test method for assessing the smoothness appearance of seams infabrics after cleansing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006.

ISO 9379 2005 Operating forces - Test method - Doors /By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2005.



ISO 14131 2005 Agricultural sprayers - Boom steadiness - Test methods /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.


ISO 15012-1 2004 Health and safety in welding and allied processes - Requirements testing andmarking of equipment for air filtration - P.1: Testing of the separation efficiency for welding fume /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.



ISO 15367-2 2005 Lasers and laser-related equipment - Test methods for determination of theshape of a laser beam wavefront - P.2: Shack-Hartmann sensors /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

ISO/TR 24498 2006 Paper, board and pulps - Estimation of uncertainty for test methods /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2006.

TESTING CONDITIONS ISO ISO 13936-3 2005 Textiles - Determination of the slippage resistance of yarns at a seam in woven

fabrics - P.3: Needle clamp method /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

TEXTILE MACHINERY AND ACCESSORIES ISO

ISO 9947 2005 Textile machinery and accessories - Two-for-one twisters - Vocabulary /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.

ISO 11675 2005 Textile machinery and accessories - Flatbed knitting machines - Vocabulary /ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005.



TEXTILES ISO ISO 7768 2006 Textiles - Test method for assessing the smoothness appearance of fabrics after

cleansing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO 7769 2006 Textiles - Test method for assessing the appearance of creases in fabrics after

cleansing /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2006. ISO 7770 2006 Textiles - Test method for assessing the smoothness appearance of seams in

fabrics after cleansing /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2006. ISO 13936-3 2005 Textiles - Determination of the slippage resistance of yarns at a seam in woven

fabrics - P.3: Needle clamp method /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

THAI CHARACTERS ISO


THERMAL EXPANSION ISO

ISO 14420 2005 Carbonaceous products for the production of aluminium - Baked anodes andshaped carbon products - Determination of the coefficient of linear thermal expansion /By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2005.

THERMAL INSULATION ISO

ISO 13792 2005 Thermal performance of buildings - Calculation of internal temperatures of a roomin summer without mechanical cooling - Simplified methods /By International Organization for Standardization(ISO). Geneva: ISO, 2005.

TRACTORS ISO

ISO 24347 2005 Agricultural vehicles - Mechanical connections between towed and towing vehicles -Dimensions of ball-type coupling device (80 mm) /By International Organization for Standardization (ISO).Geneva: ISO, 2005.


TRANSDUCERS ISO ISO 16063-13 2001 Methods for the calibration of vibration and shock transducers - P.13: Primary shock

calibration using laser interferometry /By International Organization for Standardization (ISO). Geneva: ISO, 2001.

TRANSLITERATION ISO


UNITED STATES OF AMERICA - LAW AND LEGISLATION U.S. Government Printing Office CFR 21 2006 Code of Federal Regulations - Title 21 - Food and Drugs /By Office of the Federal

Register. Washington DC: U.S.Government Printing Office 2005. CFR 29 2005 Code of Federal Regulations - Title 29 - Labor /By Office of the Federal Register.

Washington DC.: U.S. Government Printing Office, 2005.

VALVES ISO

ISO 9393-2 2005 Thermoplastics valves for industrial applications - Pressure test methods andrequirements - P.2: Test conditions and basic requirements /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.

VALVES - PRESSURE TESTING ISO ISO 9393-2 2005 Thermoplastics valves for industrial applications - Pressure test methods and

requirements - P.2: Test conditions and basic requirements /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.

VALVES - THERMOPLASTIC POLYMERS ISO

ISO 9393-2 2005 Thermoplastics valves for industrial applications - Pressure test methods andrequirements - P.2: Test conditions and basic requirements /By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2005.


VEGETABLES ISO

ISO 6561-1 2005 Fruits, vegetables and derived products - Determination of cadmium content - P.1:Method using graphite furnace atomic absorption spectrometry /By International Organization forStandardization (ISO). Geneva: ISO, 2005.

ISO 6561-2 2005 Fruits, vegetables and derived products - Determination of cadmium content - P.2:Method using flame atomic absorption spectrometry /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

VIBRATION ISO

ISO 15261 2004 Vibration and shock generating systems - Vocabulary /By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.

ISO 16063-13 2001 Methods for the calibration of vibration and shock transducers - P.13: Primaryshock calibration using laser interferometry /By International Organization for Standardization (ISO). Geneva:ISO, 2001.

VOCABULARY ISO ISO 9947 2005 Textile machinery and accessories - Two-for-one twisters - Vocabulary /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 10318 2005 Geosynthetics - Terms and definitions /By International Organization for

Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 11675 2005 Textile machinery and accessories - Flatbed knitting machines - Vocabulary /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 12231 2005 Photography - Electronic still picture imaging - Vocabulary /By International

Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2005. ISO 12637-1 2006 Graphic technology - Vocabulary - P.1: Fundamental terms /By International

Organization for Standardization (ISO). Geneva: ISO, 2006. ISO 15261 2004 Vibration and shock generating systems - Vocabulary /By International Organization

for Standardization (ISO). Geneva: ISO, 2004. ISO 15296 2004 Gas welding equipment - Vocabulary - Terms used for gas welding equipment /By



VULCANIZED RUBBER

ISO

ISO 7663 2005 Halogenated isobutene-isoprene rubber (BIIR and CIIR) - Evaluation procedures /ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2005.

WATER

ISO

ISO 8692 2004 Water quality - Freshwater algal growth inhibition test with unicellular green algae/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ISO 11732 2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis(CFA and FIA) and spectrometric detection /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.

WATER PIPES

AWWA


WATER - QUALITY ISO

ISO 8692 2004 Water quality - Freshwater algal growth inhibition test with unicellular green algae/By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

ISO 11732 2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis(CFA and FIA) and spectrometric detection /By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2005.

WEAVING MACHINERY ISO



WELDING ISO


WELDING EQUIPMENT ISO ISO 15012-1 2004 Health and safety in welding and allied processes - Requirements testing and

marking of equipment for air filtration - P.1: Testing of the separation efficiency for welding fume /ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.

ISO 22827-1 2005 Acceptance tests for Nd: YAG laser beam welding machines - Machines withoptical fibre delivery - P.1: Laser assembly /By International Organization for Standardization (ISO). Geneva:ISO, 2005.

ISO 22827-2 2005 Acceptance tests for Nd: YAG laser beam welding machines - Machines withoptical fibre delivery - P.2: Moving mechanism /By International Organization for Standardization (ISO).Geneva: ISO, 2005.

WELLS AWWA ANSI/AWWA A100 2006 Water wells /By American Water Works Association (AWWA) and American

National Standards Institute (ANSI). Denver: AWWA, 2006.

WHEELCHAIRS ISO ISO/TR 13570-1 2005 Wheelchairs - P.1: Guidelines for the application of the ISO 7176 series on

wheelchairs /By International Organization for Standardization (ISO). Geneva: ISO, 2005.

WHEELS ISO ISO 14400 2005 Road vehicles - Wheels and rims - Use, general maintenance and safety

requirements and out-of-service conditions /By International Organization for Standardization (ISO). Geneva:ISO, 2005.



WINTER SPORTS EQUIPMENT ISO


WOVEN FABRICS ISO

ISO 13936-3 2005 Textiles - Determination of the slippage resistance of yarns at a seam in wovenfabrics - P.3: Needle clamp method /By International Organization for Standardization (ISO). Geneva: ISO,2005.

ZINC AWWA

ANSI/AWWA B506 2006 Zinc orthophosphate /By American Water Works Association (AWWA) andAmerican National Standards Institute (ANSI). Denver: AWWA, 2006.


มาตรฐานไทยการพิมพ มอก. 2260 ล.1 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟ

และพิมพ เลม 1: พารามิเตอรและวิธีการวัด

มอก. 2260 ล.2 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟและพิมพ เลม 2: กระบวนการพิมพออฟเซต

มอก. 2260 ล.3 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟและพมิพ เลม 3: การพิมพหนังสือพิมพดวยระบบออฟเซตแบบโคลดเซต

มอก. 2260 ล.4 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟและพิมพ เลม 4: การพิมพนิตยสารวารสารดวยระบบกราวัวร

มอก. 2260 ล.5 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟและพิมพ เลม 5: การพิมพสกรีน

การพิมพออฟเซท มอก. 2260 ล.2 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟ

และพิมพ เลม 2: กระบวนการพิมพออฟเซต


การรบกวนคลื่นวิทยุ มอก. 2092 ล.1 2549 ขอกํ าหนดสํ าหรับอุปกรณและวิธีการวัดสัญญาณรบกวนวิทยุและภูมิคุมกัน เลม 2-1

วิธีการวัดของสัญญาณรบกวนและภูมิคุมกัน - การวัดสัญญาณรบกวนที่นํ าตามสาย

การรบกวนทางแมเหล็กไฟฟา มอก. 2092 ล.1 2549 ขอกํ าหนดสํ าหรับอุปกรณและวิธีการวัดสัญญาณรบกวนวิทยุและภูมิคุมกัน เลม 2-1


คลื่นแมเหล็กไฟฟา มอก. 2092 ล.1 2549 ขอกํ าหนดสํ าหรับอุปกรณและวิธีการวัดสัญญาณรบกวนวิทยุและภูมิคุมกัน เลม 2-1



คลื่นวิทยุ มอก. 2092 ล.1 2549 ขอกํ าหนดสํ าหรับอุปกรณและวิธีการวัดสัญญาณรบกวนวิทยุและภูมิคุมกัน เลม 2-1


เครื่องบิน - ชิ้นสวน มอก. 2301 2549 ยางลออากาศยาน

เครื่องบิน - ยาง มอก. 2301 2549 ยางลออากาศยาน

เครื่องมือและอุปกรณสํ านักงาน มอก. 145 2549 สมดุนักเรียน

โคมไฟ - ยานยนต มอก. 2284 2548 โคมไฟหนายานยนตที่ใชหลอดฮาโลเจน (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2

และ/หรือ H11)

มอก. 2285 2549 โคมไฟตัดหมอกดานหนายานยนต

มอก. 2286 2549 โคมไฟหนายานยนตที่ใชหลอดฮาโลเจน (H4)

มอก. 2287 2549 โคมไฟถอยหลังยานยนตและสวนพวง

มอก. 2288 2549 โคมไฟหนายานยนตแบบฮาโลเจนชนิดผนึกสนิท (HSB)

มอก. 2289 2549 หลอดไฟชนิดไสขดลวดที่ใชในชุดโคมไฟยานยนตและสวนพวง

มอก. 2290 2549 โคมไฟตัดหมอกดานทายยานยนตและสวนพวง

มอก. 2291 2549 โคมไฟจอดของยานยนต

มอก. 2292 2549 โคมไฟหนายานยนตที่ใชแหลงกํ าเนิดแสงชนิดปลอยประจุในกาซ

มอก. 2293 2549 แหลงกํ าเนิดแสงชนิดปลอยประจุในกาซที่ใชในโคมไฟของยานยนต

มอก. 2294 2549 โคมไฟหนายานยนตใหลํ าแสงแบบอสมมาตรที่ใชหลอดไฟชนิดไสขดลวด

มอก. 2295 2549 โคมไฟหนายานยนตใหลํ าแสงแบบสมมาตรที่ใชหลอดไฟชนิดไสขดลวด

โคมไฟ - รถยนต มอก. 2284 2548 โคมไฟหนายานยนตที่ใชหลอดฮาโลเจน (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2














ซิลคสกรีน มอก. 2260 ล.5 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟ

และพิมพ เลม 5: การพิมพสกรีน

โซเดียมไฮดรอกไซด มอก. 150 2549 โซเดยีมไฮดรอกไซดประเภทอุตสาหกรรม

ทอชวยหายใจ มอก. 2272 2549 ทอชวยหายใจ

เทคโนโลยีการพิมพ มอก. 2260 ล.1 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน

ปรูฟ และพิมพ เลม 1: พารามิเตอรและวิธีการวัด

มอก. 2260 ล.2 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟและพิมพ เลม 2: กระบวนการพิมพออฟเซต


มอก. 2260 ล.4 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟและพิมพ เลม 4: การพิมพนิตยสารวารสารดวยระบบกราวัวร


มอก. 2260 ล.5 2549 เทคโนโลยีการพิมพ - การควบคุมกระบวนการ การผลิตในงานแยกสีฮาลฟโทน ปรูฟและพิมพ เลม 5: การพิมพสกรีน

ผลิตภัณฑจากเนื้อสัตว มอก. 2297 2549 ไสกรอกโบโลนญา

มอก. 2298 2549 ไสกรอกฮอตดอก

มอก. 2299 2549 ไสกรอกแฟรงกเฟอรเตอร

ภาชนะบรรจุอาหาร - สี มอก. 1069 2549 สีสํ าหรับพลาสติกทํ าผลิตภัณฑที่สัมผัสอาหาร

ยางรถ มอก. 2301 2549 ยางลออากาศยาน

ยานยนต - ชิ้นสวน มอก. 2284 2548 โคมไฟหนายานยนตที่ใชหลอดฮาโลเจน (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2














รถยนต - ชิ้นสวน มอก. 2284 2548 โคมไฟหนายานยนตที่ใชหลอดฮาโลเจน (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2













วัสดุและอุปกรณกอสราง มอก. 50 2548 เหลก็แผนรีดเย็นเคลือบสังกะสีโดยกรรมวิธีจุมรอน แผนมวน แผนตัด และแผนลูกฟูก

วัสดุและอุปกรณทางการแพทย มอก. 2272 2549 ทอชวยหายใจ

เวชภัณฑ มอก. 2272 2549 ทอชวยหายใจ

สมุด มอก. 145 2549 สมดุนักเรียน

สี มอก. 1069 2549 สีสํ าหรับพลาสติกทํ าผลิตภัณฑที่สัมผัสอาหาร

มอก. 739 2549 สยีอมสังเคราะห: สีไดเร็กต


สีผสมเสร็จ มอก. 1069 2549 สีสํ าหรับพลาสติกทํ าผลิตภัณฑที่สัมผัสอาหาร

สียอม มอก. 1069 2549 สีสํ าหรับพลาสติกทํ าผลิตภัณฑที่สัมผัสอาหาร

สียอมและการยอมสี มอก. 739 2549 สยีอมสังเคราะห: สีไดเร็กต

เสนหมี่ มอก. 400 2549 เสนหมี่

ไสกรอก มอก. 2297 2549 ไสกรอกโบโลนญา

มอก. 2298 2549 ไสกรอกฮอตดอก

มอก. 2299 2549 ไสกรอกแฟรงกเฟอรเตอร

หลอดไฟฟา - รถยนต มอก. 2289 2549 หลอดไฟชนิดไสขดลวดที่ใชในชุดโคมไฟยานยนตและสวนพวง

เหล็กแผน มอก. 50 2548 เหลก็แผนรีดเย็นเคลือบสังกะสีโดยกรรมวิธีจุมรอน แผนมวน แผนตัด และแผนลูกฟูก .

เฮลิคอปเตอร - ชิ้นสวน มอก. 2301 2549 ยางลออากาศยาน

เฮลิคอปเตอร - ยาง มอก. 2301 2549 ยางลออากาศยาน


Alphabetical Subject Index

Subject Page

Accident prevention 1

Acquisition system - Law and legislation 1

Activated carbon 1

Adhesives 1

Agricultural tractors 1

Aids for the disabled 2

Alloy steels 2

Alloys 2

Aluminate 2

Aluminium 3

Aluminium alloys 3

Aluminium inorganic compounds 3

Aluminium inorganic compounds - Adsorption 3

Aluminium oxide 3

Ammonium inorganic compounds 4

Anhydrite 4

Animal feed 4

Anthropometric characteristics 4

Arc welding 4

Ash 4

Atomic absorption spectrophotometry 5

Audio systems 5

Audiovisual materials 5

Automatic control systems 5

Banks 5

Bearings 6

Board (paper) 6

Buildings 6

Buoyancy aids 6

Butter 6


Subject Page

Camera lenses 7

Carbon dioxide 7

Carbonaceous matter determination 7

Cement 7

Cement mortar 7

Ceramics 8

Chemical analysis and testing 8

Chemical composition 8

Chlorine 8

Classification systems 8

Cloth 8

Coal 9

Coating processes 9

Coatings 9

Coding (data conversion) 9

Coke 10

Coke - Ash determiation 10

Communication equipment 10

Computer-computer communications 10

Computer software 10

Concretes 10

Construction equipment 11

Construction materials 11

Copper inorganic compounds 11

Corrosion 11

Corrosion tests 12

Countersinks 12

Cranes 12

Crushing tests 12

Dairy products 13

Dampers (air conditioning) 13

Decorative materials 13


Subject Page

Defects 13

Density measurement 13

Dental materials 13

Dentistry 14

Determination of content 14

Diagrams 14

Dimensions 14

Doors 14

Doubling (textiles) 15

Drugs - Law and legislation 15

Ductility - Metal coatings 15

Earth-moving equipment 15

Electrodes 15

Electromagnetic compatibility (EMC) 15

Electromagnetism 16

Emergency preparedness 16

Environmental engineering 16

Ergonomics 16

Essential oils 16

Fat content determination 16

Ferric inorganic compounds 17

Fibre ropes 17

Filters 17

Filters (optical) 17

Fire dampers 17

Fire safety 17

Fishing nets 18

Fitting - Pipes 18

Flanges 18

Flowmeter 18

Fluidization 18

Fluorosilicic acid 18


Subject Page

Food - Law and legislation 18

Food products 19

Fruits 19

Fuels 19

Funnels 19

Gas cylinders 19

Gas-welding equipment 20

Gears 20

Geosynthetics 20

Geotextiles 20

Granular materials 21

Graphic displays 21

Graphic representation 21

Graphic symbols 21

Graphic technology 21

Hardmetals 22

Hexametaphosphate 22

High-tensile steels 22

Hydrates 22

Hydrometry 22

Hydroxides 22

Hypochlorites 23

Identification methods 23

Identity cards 23

Information exchange 23

Information technology 23

Interfaces (data processing) 24

Isoprene rubber 25

Jib cranes 25

Knitting machinery 25

Labor and laboring 25

Labor - Law and legislation 25


Subject Page

Laminates 25

Lasers 26

Latin characters 26

Leather 26

Lime 26

Machine-readable materials 26

Management techniques 27

Manganese 27

Marine safety 27

Marking 27

Medical equipment 27

Metal coatings 27

Metals 28

Milk 28

Molybdenum 28

Moving pictures 29

Natural gas 29

Nickel 29

Nuclear fuels 29

Occupational safety 29

Optical instruments 29

Optics 30

Oscillations 30

Oxygen 30

Paper 30

Paper pulp 30

Particulate materials 31

Particulate materials - Sampling methods 31

Penetration tests 31

Performance testing 31

Permanganate number 31

Petroleum technology 31


Subject Page

Phosphates 32

Photographic lenses 32

Photography 32

Pipe fittings 32

Pipe fittings - Concretes 32

Pipeline transportation 33

Pipelines 33

Pipes 33

Pipes - Cast-iron 33

Plastics 33

Polyacrylates 34

Polyamides 34

Polyethylene - Pipes 34

Polyurethane 34

Porosity measurement 34

Potassium inorganic compounds 34

Powder metallurgy 35

Printing inks 35

Process control 35

Protective clothing 35

Protective coatings 35

Radio disturbances 36

Radiocommunication 36

Radiofrequencies 36

Risk management 36

Road transport 36

Road vehicle engineering 37

Road vehicles 37

Safety devices 37

Sampling methods 37

Sawn timber 38

Seams 38


Subject Page

Security techniques 38

Silicates 38

Sintered products 38

Skiing equipment 39

Skin (body) - Goats 39

Sodium 39

Sodium chloride 39

Sodium fluoride 39

Sodium fluorosilicates 40

Sodium hydroxide 40

Sodium inorganic compounds 40

Sodium organic compounds 40

Soils 40

Soils - Quality 41

Solid fuels 41

Space technology 41

Sports equipment 41

Spraying (coating) 42

Spraying equipment (agriculture) 42

Steel pipes 42

Steels 42

Steels - Surface treatment 42

Structural timber 43

Sulfates 43

Sulphides 43

Sulphur dioxide 43

Syntax - Transfer functions 43

Telecommunication 44

Telecommunication - Law and legislation 44

Telecommunication systems 44

Testing 44

Testing conditions 45


Subject Page

Textile machinery and accessories 45

Textiles 46

Thai characters 46

Thermal expansion 46

Thermal insulation 46

Tractors 46

Transducers 47

Transliteration 47

United States of America - Law and legislation 47

Valves 47

Valves - Pressure testing 47

Valves - Thermoplastic polymers 47

Vegetables 48

Vibration 48

Vocabulary 48

Vulcanized rubber 49

Water 49

Water pipes 49

Water - Quality 49

Weaving machinery 49

Welding 50

Welding equipment 50

Wells 50

Wheelchairs 50

Wheels 50

Winter sports equipment 51

Woven fabrics 51

Zinc 51


ดรรชนีหัวเรื่อง

หัวเรื่อง หนาการพิมพ 52

การพิมพออฟเซท 52

การรบกวนคลื่นวิทยุ 52

การรบกวนทางแมเหล็กไฟฟา 52

คลื่นแมเหล็กไฟฟา 52

คลื่นวิทยุ 53

เครื่องบิน - ชิน้สวน 53

เครื่องบิน - ยาง 53

เครื่องมือและอุปกรณสํ านักงาน 53

โคมไฟ - ยานยนต 53

โคมไฟ - รถยนต 53

ซลิคสกรีน 54

โซเดียมไฮดรอกไซด 54

ทอชวยหายใจ 54

เทคโนโลยีการพิมพ 54

ผลิตภัณฑจากเนื้อสัตว 55

ภาชนะบรรจุอาหาร สี 55

ยางรถ 55

ยานยนต - ชิน้สวน 55

รถยนต - ชิน้สวน 56

วัสดุและอุปกรณกอสราง 56

วัสดุและอุปกรณทางการแพทย 56

เวชภัณฑ 56

สมุด 56

สี 56


หัวเรื่อง หนาสีผสมเสร็จ 57

สียอม 57

สียอมและการยอมสี 57

เสนหมี่ 57

ไสกรอก 57

หลอดไฟฟา - รถยนต 57

เหล็กแผน 57

เฮลิคอปเตอร - ชิน้สวน 57

เฮลิคอปเตอร - ยาง 57

accident prevention iso -...

Documents