about ati - accurate technologies ati ati is a leading independent supplier of electronic control...
TRANSCRIPT
Accurate Technologies Inc. (ATI), founded in 1991, provides innova-tive solutions for the evolving needs in Electronic Control Unit (ECU) development.
About ATI
ATI is a leading independent supplier of Electronic Control Unit development tools. At �rst glance, ATI is a product-based company, but its business philosophy is that of a service organiza-tion. Rather than selling a static product to everyone, ATI believes in developing products that are built from the ground up to adapt to customer processes and needs. ATI's service approach is practiced throughout all areas of the company, from worldwide employee recruitment to most importantly, our customer support.
History Timeline
ATI’s global business objective is to provide total customer satisfaction by exceeding our customers’ expectations in terms of quality, delivery, and service.
ATI products re�ect forward thinking and creative solutions for vehicle manufacturers, testers, calibrators, and suppliers allowing them to save time and money by working more e�ciently.
1991
CANLab 1.0Bus Analysis
IGTM 1000Timing Measurement
ECU CalibrationGREDI
ROM2CANEmulator
EDAQData Acquisition
M5
M6Memory Emulator
VISION Hub
VISION 1.0Calibrat ion Software
No-HooksRapid Prototyping
SmartTachSpeed Measurement
Apollo ProData Acquisition
Software
Injector/CoilDriver Modules
SwedenOffice
JapanOffice
United KingdomOffice
Company Founded
1992
1993
1994
1995
1997
1998
2000
2001
2002
2003
2005
GermanyOffice
2006
2007
FranceOffice
2013IndiaOffice
A8Serial Interface
CANverter
A7Serial Interface
2011EMX
Data Acquisition
United States Office
Headquartered in Wixom, Michigan, customer support is provided around the world with ATI subsidiary o�ces in the United Kingdom, Sweden, Germany, France, India, and Japan. Distributors support other markets, including China, Korea, and Italy.
Memory Emulator
Data Acquisition (DAQ) solutions are an essential compo-nent of reliably acquiring data throughout the entire development process in any environment.
ECU Calibration analyzes the relationships of inputs and outputs and makes real-time modi�cations.
ECU Rapid Prototyping patches in new code on the ECU without the need for the original source, or knowledge of assembler, hex code, or prede�ned hooks.
Test Cell combines industrial machinery (dynamometer or "dyno") with precision control and laboratory-quality measurements to replicate real-world environments for individual components, systems of components, and complete vehicles.
Network Analysis tools provide the ability to capture, view and record messages, monitor bus integrity, or troubleshoot modules functionality on a network.
ATI Solutions
Core Values
PhilosophyIndependent corporation
• Products are designed, developed, and manufactured in house• Privately-held results in faster decision making • Focused product portfolio• Open, transparent, and straightforward • Diverse customer and partner base
QualityProducts manufactured at Michigan facility
• Comprehensive manufacturing processes using state-of-the-art machinery• Increased product quality (less than 0.01% warranty returns)• Production is co-located with engineering department for faster issue resolution• Shorter lead time• Select the best and most quali�ed suppliers
Service / SupportFast response time
• Average repair resolved in two weeks• Average phone calls answered immediately during regular business hours• Average emailed issues answered within one hour• On-site support, worldwide• Free, ongoing product training
“Support is a service, not a product.”
Use ATI development solutions for any vehicle controller such as powertrain including engine or transmission, brake and body control modules and for the networks connecting them. Expect to �nd ATI products on the lab bench, in Hardware-in-the-Loop or dynamometer facilities to in-vehicle applications.
Automotive
Heavy Truck& Bus
Defence/Government
Aviation
RecreationalVehicles
Other
Industry Areas
ATI product features are a result of �rsthand experience, collaborating with developers and calibrators. This approach has resulted in a solid philosophy of product development. Expect rugged solid products and
seamless compatibility that is unusual in the industry.
ATI Product Portfolio
CANLab
ROM2CAN
M-seriesA-series
A8
No-Hooks
OnTarget
SmartTach
IGTM
CANverter
EMX
EDAQ
SmartTachReads any pulse input from a wide range of sources such as magnetic sensor, encoders, Electronic Control Unit outputs or ignition coils.
IGTMThe Ignition Timing Meter is a precision timing measurement instrument designed for engine development and testing where ignition timing and CAM timing measurement accuracy (steady-state and transient) is important.
CANverterCollects analog or digital information then converts the information in a CAN message onto the network (or vice versa).
Data Acquisition ModulesRugged in-vehicle instrumentation products for accurate and reliable measurement and acquisition of external signals. These units provide precise measurement at a very competitive price per channel.
Rapid PrototypingAny hardware or software component can be prototyped throughout the develop-ment process with ATI’s patented bypass technology.
ECU InterfacesEvolving through the years, users can select between serial interfaces and memory emulators for ECU calibration and data acquisition.
CANLabIntegrates a complete solution for bus communication, data logging, and data analysis via industry standard network protocols such as Controller Area Network (CAN) including J1939 and Local Interconnect Network (LIN).
VISIONDesigned and developed from direct input from the ECU develop-ment community, VISION enables convenient features such as customization of the tool, the ability to perform more than one function or test at a time, and programmabil-ity to simplify repetitive tasks. This functionality is available seamlessly throughout the ECU development process.
ENGINE
DAQ COMMSECU
As vehicle electronics systems become increasingly complex, developers require tools to improve e�ciency while reducing cost and time. Throughout the complete development process, ATI provides solutions that �t or
complement your needs.
Sweden
United States
India
Italy
ChinaUnited Kingdom Germany
France Japan
ATI PARTNERS ATI o�ers Kvaser CAN Bus interface products to complement its line of tools for any application requiring access to the CAN bus via a PC. This full range of products is all based on the same API, CANlib. Write to
United States Phone: 1(248) 848 9200Email: [email protected]
Locations
just one API and use any Kvaser product on any platform. ATI partnered with well established Kvaser products to provide a competitively priced, easy to use, �exible solution for network interfacing with itsVISION or CANLab Software.
Founded in 1991, ATI has established o�ces around the world. One strong guideline for thissustained organic growth has been to retain the level of customer service expected by ATI customers.
Headquarters
JapanPhone : +81 3-5325-6222Email: [email protected]
China (quali�ed distributor)Phone: +86-10-8278-0969Email: [email protected]
IndiaPhone : +91 80 41694218Email : [email protected]
Asia
SwedenPhone: +46 (0) 31 773 7140Email: [email protected]
EuropeUnited KingdomPhone: +44 (0) 1767 652 340Email: [email protected]
Italy (quali�ed distributor)Phone: +39 (0) 173 620 600Email: [email protected]
FrancePhone: +33 (0) 1 72 76 26 10Email: [email protected]
GermanyPhone: +49 (0)89 9700 7121Email: [email protected]
Select from three main product areas. USBcan units o�er two channel USB interfaces for the CAN bus, and the Leaf series of products provide a single channel USB interface for CAN but with a range of features and price points. And �nally, products such as the Memorator allow you to log data without a PC, then the PC to extract network messages.
Professional versions of any Kvaser product o�er MagiSync™, Kvaser's software time stamp, to time-align multiple CAN transceivers. Also expect broader temperature ranges, higher speeds, increased bandwidth and higher level of accuracy with Professional version of products.