a200 - 2 inch air operated double … · a200 - 2 inch air operated double diaphragm pump....
TRANSCRIPT
A200 - 2 INCH AIR OPERATED DOUBLE DIAPHRAGM PUMP
all-flo.com
SPECIFICATIONS
Dimension
Air Inlet 3/4” (19mm)
Liquid Inlet 2” (51mm)
Liquid Outlet 2” (51mm)
Pump Weight Aluminum 62 lbs (28kg)
Pump Weight Stainless Steel 130 lbs (59 kg)
Performance
Max. Flow: 190 GPM (719 lpm)
Max. Air Pressure: 120 PSI (8.3 bar)
Max. Solids: 1/4” (6.4 mm)
Max. Suction Lift Dry: 24 ft-H20 (7.3 m-H20)
Max. Suction Lift Dry with PTFE: 19 ft-H20 (5.8 m-H20)
Max. Suction Lift Wet: 32 ft-H20 (9.8 m-H20)
Noise Level (with muffler): 76 dB (103 none)
A200 2” PUMP
2” ALUMINUM• NPT or BSP Connections • Zinc Plated Hardware • Non-Metallic Muffler• Suction Center Front / Discharge Center Rear Standard Porting
2” STAINLESS STEEL• ANSI/DIN Flange, Combination ANSI DIN Flange & NPT or Combination ANSI/DIN Flange & BSP • Stainless Steel Hardware • Non-Metallic Muffler• Suction Center Front / Discharge Center Rear Standard Porting
all-flo.com
INTERMEDIATE / INNER CHAMBERA = Aluminum
A200 2” MODEL DESIGNATION MATRIX
Air end repair kit contains pilot sleeve assembly and main air valve.
PRODUCT SERIES
FLUID CONNECTION TYPE
FLUID CHAMBERS/
MANIFOLDS
DIAPHRAGMVALVE/BALLVALVE SEAT
O-RINGS
SPECIAL (OTHER)
INTERMEDIATE/
INNER CHAMBER
SPECIAL (HARDWARE,
ATEX, MUFFLER)
SPECIAL
(PORTING)
A 2 0 0 - 1 2 3 - 4 5 6 7 - 0 0 0
SIZE
DIAPHRAGMVALVE/BALLVALVE SEAT
O-RINGS
WET END REPAIR KIT Wet end kit contains 2 diaphragms, (2 back-up diaphragms if required), 4 balls, 4 seats, and 4 seat o-rings.
AIR END REPAIR KIT
MATERIAL
A W E - 2 0 0 - 4 5 6 7A A K - 2 0 0 - 2
1
2
4
0
3
FLUID CONNECTION TYPEN = NPTB = BSPF= ANSI/DIN FlangeC = Combination ANSI / DIN FLANGE & NPTE = Combination ANSI / DIN FLANGE & BSP
INTERMEDIATE / INNER CHAMBERA = Aluminum
FLUID CHAMBER / MANIFOLDSA = Aluminum3 = 316 Stainless Steel
5
DIAPHRAGMSN = Buna-NE = EPDMV = Viton®/FKMG = Geolast®
S = Santoprene®
T = PTFE (Overlay)
VALVE/BALLN = Buna-NE = EPDMV = Viton®/FKMG = Geolast®
3 = Stainless SteelT = PTFES = Santoprene®
6
7
VALVE SEATA = Aluminum3 = Stainless SteelP = PolypropyleneY =Nylon
O-RINGSN = Buna-NE = EPDMT = PTFEV = Viton®/FKM
SPECIAL OPTION000 = Standard
PRODUCT
SERIES
WET END
REPAIR KIT
PUMP SIZE
PRODUCT
SERIES
PUMP SIZE
AIR END
REPAIR KIT
QUICK SHIP CONFIGURATIONS Ships in All-Flo Standard Lead Time
Many additional pump configurations are available upon request. Lead time may vary depending on configuration. Please contact factory for more information.
BSP Connection
A200-BAA-GGPN-000A200-BAA-SSPE-000A200-BAA-TTYT-000
STOCK PUMP MODELSALUMINUM STAINLESS STEELNPT Connection ANSI/DIN Flange Connection
A200-NAA-GGPN-000 A200-CA3-GG3N-000A200-NAA-SSPE-000 A200-CA3-SS3E-000A200-NAA-TTYT-000 A200-CA3-TT3T-000
all-flo.com
A 2 0 0 - 1 2 3 - 4 5 6 7 - 0 0 0
A200 2” PERFORMANCE CURVES
*Flow rates indicated on all three charts shown were determined by pumping water at flooded suction, using an aluminum intermediate fitted pump. For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.
PERFORMANCE CURVE (2” RUBBER)*
PERFORMANCE CURVE (2” TPE)*
PERFORMANCE CURVE (2” PTFE)*
Performance SpecificationsMax. Flow: 190 gpm (719 lpm)
Max. Air Pressure: 120 psi (8.3 bar)
Max. Solids: 1/4” (6.4 mm)
Max. Suction Lift Dry: 24.4 ft-H2O (7.4 m-H2O)
Max. Suction Lift Wet: 31.7 ft-H2O (9.7 m-H2O)
Weight: AL-62 lbs (28 kg) / SS-130 lbs (59 kg)
Air Inlet 3/4” FNPT
Liquid Inlet 2” FNPT, 2” FBSP, or ANSI/DIN Flanged
Liquid Outlet 2” FNPT, 2” FBSP, or ANSI/DIN Flanged
Height 26.3” (668 mm) AL / 29.5” (749 mm) SS
Width 19.5” (495 mm) AL / 19.1” (483 mm) SS
Depth 13.5” (343 mm) AL / 14.9” (378 mm) SS
Performance SpecificationsMax. Flow: 190 gpm (719 lpm)
Max. Air Pressure: 120 psi (8.3 bar)
Max. Solids: 1/4” (6.4 mm)
Max. Suction Lift Dry: 24.4 ft-H2O (7.4 m-H2O)
Max. Suction Lift Wet: 31.7 ft-H2O (9.7 m-H2O)
Weight: AL-62 lbs (28 kg) / SS-130 lbs (59 kg)
Air Inlet 3/4” FNPT
Liquid Inlet 2” FNPT, 2” FBSP, or ANSI/DIN Flanged
Liquid Outlet 2” FNPT, 2” FBSP, or ANSI/DIN Flanged
Height 26.3” (668 mm) AL / 29.5” (749 mm) SS
Width 19.5” (495 mm) AL / 19.1” (483 mm) SS
Depth 13.5” (343 mm) AL / 14.9” (378 mm) SS
Performance SpecificationsMax. Flow: 180 gpm (681 lpm)
Max. Air Pressure: 120 psi (8.3 bar)
Max. Solids: 1/4” (6.4 mm)
Max. Suction Lift Dry: 19.3 ft-H2O (5.8 m-H2O)
Max. Suction Lift Wet: 31.7 ft-H2O (9.7 m-H2O)
Weight: AL-62 lbs (28 kg) / SS-130 lbs (59 kg)
Air Inlet 3/4” FNPT
Liquid Inlet 2” FNPT, 2” FBSP, or ANSI/DIN Flanged
Liquid Outlet 2” FNPT, 2” FBSP, or ANSI/DIN Flanged
Height 26.3” (668 mm) AL / 29.5” (749 mm) SS
Width 19.5” (495 mm) AL / 19.1” (483 mm) SS
Depth 13.5” (343 mm) AL / 14.9” (378 mm) SS
AIR CONSUMPTION (SCFM)
AIR CONSUMPTION (SCFM)
AIR CONSUMPTION (SCFM)
all-flo.com
A200 2” PUMP DIMENSIONS
2” PUMP DIMENSIONS - ALUMINUM
24.80”630mm
1.90” (48mm)
14.00”336mm
2.40”(61mm)
26.30”668mm
19.54” (496mm)
15.86” (403mm)
13.516” (343mm)
12.25” (311mm)
10.00” (254mm)
10.00”(254mm)
.70” (18mm)
9.00”(229mm)
14.00”(356mm)
2” FNPT or FBSP (x4)
3/4” FNPT
24.80”630mm
1.90” (48mm)
14.00”336mm
2.40”(61mm)
26.30”668mm
19.54” (496mm)
15.86” (403mm)
13.516” (343mm)
12.25” (311mm)
10.00” (254mm)
10.00”(254mm)
.70” (18mm)
9.00”(229mm)
14.00”(356mm)
2” FNPT or FBSP (x4)
3/4” FNPT
2” PUMP DIMENSIONS - STAINLESS STEEL
3.49”(89mm)
16.06”(408mm)
26.54”(674mm)
29.54”(750mm)
19.09” (485mm)
4.60”(117mm)
3.90”(99mm)
16.06”(408mm)
15.86” (403mm)
13.52” (343mm)12.25” (311mm)10.00” (254mm)
12.80”(325mm)
.70” (18mm)
ANSI/DIN Flange (x2)
14.90”(378mm)
3/4” FNPT
3.49”(89mm)
16.06”(408mm)
26.54”(674mm)
29.54”(750mm)
19.09” (485mm)
4.60”(117mm)
3.90”(99mm)
16.06”(408mm)
15.86” (403mm)
13.52” (343mm)12.25” (311mm)10.00” (254mm)
12.80”(325mm)
.70” (18mm)
ANSI/DIN Flange (x2)
14.90”(378mm)
3/4” FNPT
3.49”(89mm)
16.06”(408mm)
26.54”(674mm)
29.54”(750mm)
19.09” (485mm)
4.60”(117mm)
3.90”(99mm)
16.06”(408mm)
15.86” (403mm)
13.52” (343mm)12.25” (311mm)10.00” (254mm)
12.80”(325mm)
.70” (18mm)
ANSI/DIN Flange (x2)
14.90”(378mm)
3/4” FNPT
YOUR AUTHORIZED ALL-FLO DISTRIBUTOR
7750 Tyler Blvd.Mentor, Ohio 44060
phone: 440.354.1700fax: 440.354.9466
all-flo.com
13965-A200_Rev_A1
FOOD & BEVERAGE
OEMS
MINING
OIL & GAS / REFINERY
CHEMICAL / PETROCHEMICAL
ALL-FLO is committed to the pursuit of designing and manufacturing the highest quality product available to industry. Since the beginning in 1986, All-Flo engineers have used their extensive knowledge of today’s engineered materials, advanced air system logic and manufacturing techniques to develop the superior group of lube-free, air-operated diaphragm pumps found in this catalog. Every pump is performance engineered and quality built to provide trouble-free service under the toughest conditions.
CERAMIC SLIP / GLAZE
PAINT & COATING
AUTO/PLATING & FINISHING