a internal works c lt panel d earthing and cabling … · 2019-07-06 · 1.7 12 way vtpn...

SUMMARY OF COSTS - THE AIR FORCE SCHOOLELECTRICAL SYSTEM

S.NO SECTION NAME AMOUNT

A INTERNAL WORKS

C LT PANEL

D EARTHING AND CABLING WORKS

E FIRE ALARM SYSTEM

F LIGHT FIXTURES

G CCTV SYSTEM- HARDWARE

H PA SYSTEM - HARDWARE

TOTAL

S.NO ITEM DESCRIPTION QTY UNIT RATE AMOUNT

A DISTRIBUTION BOARDS

Supply, installation, testing & commissioning of

following distribution boards for power & light

points, fabricated from sheet steel, with DIN bar

for mounting of MCB’s, 100 A Cu strip, 2 n.o

neutral links, 2n.o earth bars etc. & complete in

all respects :1.1 4 way TPN distribution board. 1 n.o

- 32 A, 4P, MCB as incomer.

- 12 n.o, 6-32 A, SP, MCB as outgoings

1.2 6 way TPN distribution board. 3 n.o



1.3 8 way TPN distribution board.. 0 n.o



1.4 12 way TPN distribution board.. 0 n.o

- 63/40 A, 4P, MCB as incomer.


1.4 12 way SPN distribution board.. 1 n.o



1.5 8 way SPN distribution board.. 0 n.o



1.5 8 way VTPN distribution board.. 0 n.o

- 100 A, 4P, MCCB as incomer.

- 24 poles of , 6-40 A, SP/TP, MCB as required







TOTAL- SECTION A

All rates quoted shall be for complete finished work including cost of all labor, material, scaffolding,

tools & tackles, lead lifts etc. and inclusive of all taxes and duties, octroi, royalties etc. The material

used shall be duly approved by the consultants before incorporation in the actual works.

BILL OF QUANTITIES (INTERNAL)


B WIRING FOR TELEPHONE & EPBAX POINTS & DATA POINTS:

4 Supply & drawing of CAT 6, UTP cable, AT&T

make, in PVC conduits. Work includes repair of

chase to original finish.

320 Mtrs

5 Supply & fixing of computer sockets RJ 45 type,

AT&T lucent type (crabtree model) of 100 MB

data transfer capacity complete with MS box as

required. Work includes repair of chase to original

finish.

8 N.o

TOTAL- SECTION B


C POINT WIRING :

The rates for circuit cum point wiring for all the items shall

include the following :

The rates shall include material & labour for necessary

any length of circuit and point wiring, earth wiring, rigid

and flexible conduiting, bends, junction boxes, pull boxes,

screws, washers, check nuts, couplers, saddles, Batten

Holder, hangers supports, GI pull wire, civil work

comprising chipping, cutting chases, fixing conduits &

making good or surface clamping of conduit work as the

case may be, modular type switches, socket outlets,

Electronic fan regulators surface or recessed outlet

boxes as the case may be, ceiling rose, rigid and flexible

conduit as may be required, connectors and terminal

blocks of proper rating etc. & sleeves etc. including lugs /

thimbles for terminations. Fan points wiring shall include

switch as well as electronic speed regulator, and fan

hook box with fan hook: if specifically called for in the

BOQ.

General Notes:-

All wiring (P,N,E) shall be 1100 volts grade, HR FRLS

PVC insulated or ZHLS Polymer insulated,

unsheathed, flexible, copper conductor, single or multi

core as called for.

Size of earth wire shall be the same as of the phase

conductor or as specified.

All Switches & Sockets shall be of modular design

complete with modular plate and suitable sized GI/

moulded boxes as called for and shall be suitable up to

250V, AC/DC supply or as specified.

The recessed Switches & Socket outlet boxes shall be of

16G GI and of the same make / manufacturer as of the

switches & sockets. Local make boxes are not to be

used.

PVC Conduits shall be of FRLS type and shall be of

minimum wall thickness of 2mm. (Rigid Heavy duty

Conduit) unless otherwise specified. Company specified

adhesive to be used for joining/ fixing of PVC conduits

GI and MS Conduits shall be of min. 16G thickness.

Metallic conduit work shall be complete with proper

threads, check nuts/ lock nuts etc.

Flexible conduits, where ever required, shall be of heavy

duty and complete with couplers.

Minimum diameter of the conduit to be used shall be

20mm. Conduit less than 20mm dia is not to be used

unless otherwise specified. Conduiting may be concealed

or surface mounted (Exposed) as the case may be.


Wiring terminations shall be made using proper sized

copper thimbles/ lugs.

All circuit & point wiring shall be colour coded & shall

have ferruling on either end for circuit identification.

It shall include circuit wire (P+N), point wire (P+N), earth

wire and conduit work of any length from DB to point via

switch, switch, socket outlet, metal clad/ moulded outlet

and box and complete in all respects and shall be

payable on point basis.

Wiring shall include conduiting and wiring (Phase,

Neutral, Earth) of light points/ fan points/ UPS and raw

sockets outlets of any length from the distribution board

via switch to the point.

Following Meterial and makes will be used for Point

wiring.

CONDUITING WILL BE USED FOR THIS PROJECT:-

PVC

FLEXIBLE CONDUIT WILL BE USED FOR THIS

PROJECT : PVC

WIRING WILL BE USED FOR THIS PROJECT:- HR

FRLS PVC insulated flexible Copper.

Modular Type Switch & Socket WILL BE USED FOR

THIS PROJECT:- HR FRLS PVC insulated flexible

Copper. Makes - Schneider (Vivace) / Crebtree

(Athena) / Legrand (Myrius)/Philips

1 Point wiring for light points including looping

circuits will be carried out with 1.5 sq.mm FRLS

PVC insulated Cu conductor, inclusive of circuit

wiring with 2.5 sq.mm Cu conductor & 1.5 sq

mm FRLS PVC insulated Cu earthing wire , in

surface/ recessed MS conduits, inclusive of G.I

box & modular plate switch. Work includes repair

of chase to original finish. 1.1 One light point with 1 switch with PVC conduits 71 n.o

1.2 Each additional point with PVC conduits. 143 n.o

1.3 Two way light points with PVC conduits 4 n.o

1.6 First point directly controlled by MCB. 4 n.o

2 Point wiring for 3 pin 5 A points including looping

circuits will be carried out with 2.5 sq.mm FRLS

PVC insulated Cu conductor, inclusive of circuit

wiring with 2.5 sq.mm Cu conductor & FRLS PVC

insulated Cu 1.5 sq mm earthing wire , in

surface/ recessed PVC conduits, inclusive of G.I

box & modular plate switch & socket . Work

includes repair of chase to original finish.

2.1 5A plug with PVC conduits. 12 n.o


3 Point wiring for 3 pin 5/15 A points including

looping circuits will be carried out with 4.0 sq.mm

FRLS PVC insulated Cu conductor, inclusive of

circuit wiring with 4.0 sq.mm Cu conductor &

PVC insulated Cu 1.5 sq mm earthing wire , in

surface/ recessed PVC conduits, inclusive of G.I

box & modular plate switch & socket . Work

includes repair of chase to original finish.

3.1 15A plug with PVC conduits. 28 n.o

5 Point wiring for Exhaust Fan points including



circuit wiring with 2.5 sq.mm Cu conductor & 1.5

sq mm earthing wire , in surface/ recessed PVC

conduits, inclusive of G.I box & modular plate

switch . Work includes repair of chase to original

finish.

9 n.o

6 Point wiring for Ceiling Fan points including



circuit wiring with 2.5 sq.mm Cu conductor & 1.5

sq mm earthing wire , in surface/ recessed PVC

conduits, inclusive of G.I box & Fan Box(smaller

size of approved sample) & modular plate switch .

Work includes repair of chase to original finish.

62 n.o

6.1 Extra for electronic regulator 62 n.o

Item number 12- 14 will include wiring in addition

to the wiring already given in this section. It will

be used for Sub mains wiring, AC wiring, small

pums machines etc.7 Supply & fixing wherever directed PVC conduits

recessed/ surface inclusive of repair of chase to

original finish and of following sizes :

7.1 20 mm dia 200 mtrs


7.3 32mm dia 100 mtrs

8 Supply & fixing wherever directed MS conduits

recessed/ surface inclusive of repair of chase to

original finish and of following sizes :8.1 20 mm dia 10 mtrs


8.3 32mm dia 5 mtrs


9 Supply & installation of in floor raceways with

cover, GI , 2 mm thick including bends, reducers,

tees, cross members and other accessories as

required. This will include all material required for

installation including junction boxes etc. as per

site conditions and requirements. Width of the

raceways shall be of following sizes:

9.1 100 * 38 * 1.6 mm 0 Mtrs

9.2 150 * 38 * 1.6 mm 0 Mtrs

9.3 300 *38*1.6 mm 0 Mtrs

10 Providing & fixing of HEIGHT ADJUSTABLE GI

junction boxes of VARIOUS SIZES, OF SKABER

MAKE, AS FOLLOWS:.10.1 100*100*60-70 2 Mtrs

10.2 150*150*60-70 2 Mtrs

10.3 300*300*60-70 2 Mtrs

11 Supply & drawing of following FRLS PVC insulated

copper wires in existing PVC conduits. :

11.1 2 * 4 sq.mm + 1*4 sq.mm 30 Mtrs

11.2 2 * 6 sq.mm + 1*6 sq.mm 20 Mtrs

11.3 2 * 10 sq.mm + 1*10 sq.mm 30 Mtrs

11.4 2 * 16 sq.mm + 1*16 sq.mm 0 Mtrs

11.5 4 * 4 sq.mm + 2*2.5 sq.mm 20 Mtrs

11.6 4 * 6 sq.mm + 2*6 sq.mm 160 Mtrs

11.7 4 * 10 sq.mm + 2*10 sq.mm 0 Mtrs

11.8 4 * 16 sq.mm + 2*16 sq.mm 0 Mtrs

11.9 2 * 10 sq.mm + 1*4 sq.mm 0 Mtrs

11.1 4 * 25 sq.mm + 2*10 sq.mm 0 Mtrs

11.11 4* 35 sq.mm + 2*16 sq.mm 0 Mtrs

11.12 3* 1.5 sq.mm 20 Mtrs

11.13 1 * 1.5 sq.mm (earth wire) 20 Mtrs

11.14 1 * 2.5 sq.mm (earth wire) 20 Mtrs

11.15 1 * 4 sq.mm (earth wire) 20 Mtrs

12 Supply & drawing of following RG59 X1 +4X0.15

SQMM CCTV CABLE IN existing PVC conduits/

cable trays etc.

420 Mtrs

13 Supply & drawing of following MUSIC WIRES(

Belden make or equivalent) for PA speakers in

existing PVC conduits/ cable trays etc.

150 Mtrs


14 Supply & installation of overhead cable trays, GI

PERFORATED type WITH COVER, 2 mm thick

including horizontal & vertical bends, reducers,

tees, cross members and other accessories as

required. This will include all material required for

installation including GI suspenders etc. when

suspended from ceiling or Angle irons etc. when

grouted in wall or as per site conditions and

requirements. Width of the cable tray shall be of

following sizes:14.1 40 * 150 * 40 mm 0 Mtrs

14.2 50 * 300 * 50 mm 0 Mtrs

14.3 50 * 450 * 50 mm 0 Mtrs

14.4 50 * 600 * 50 mm 0 Mtrs

14.5 25*50*25 mm 0 Mtrs

14.6 25 *100* 25 mm 0 Mtrs

TOTAL- SECTION C(i)


E MISCELANEOUS ITEMS

1 Supply & fixing of changeover switches in SS

enclosure complete in all respects and of following

ratings:1.1 63 A, 4P, ON LOAD CHANGEOVER SWITCH 0 n.o

1.2 80 A, 4P, ON LOAD CHANGEOVER SWITCH 0 n.o




1.6 S/P/F of Metal Clade Box with Single Phase 0 n.o.

1.7 S/P/F of metal Clade Box with Three Phase 0 n.o.

2 Supply & fixing of MCB in powder coated

enclosure complete in all respects and of following

ratings:2.1 32, DP, MCB 15 n.o

2.2 40, DP, MCB 2 n.o

2.3 63, DP. MCB 0 n.o

2.4 32, TPN, MCB 2 n.o

2.5 40, TPN, MCB 0 n.o

2.6 63 A, TPN, MCB 0 n.o

3 Drawing of any type of wiring to be provided by

the client in existing PVC conduits.0 Mtrs

4 Providing & fixing of MS junction boxes of

250mm.x250mm.x50mm. Deep of 16SWG. With

14SWG. MS cover on the floor(MS powder coated

type).

0 n.o.

4a Providing & fixing of MS junction boxes of

100mm.x100mm.x50mm. Deep of 16SWG. With

14SWG. MS cover on the floor(MS powder coated

type).

0 n.o.

5 Providing & fixing spike busters 5AMP plug points 0 n.o.

6 Providing & fixing spike busters 15AMP plug

points

0 n.o.

7 Supply and fixing of 24 hour clock timers in

existing DB's 0n.o.

8 Supply & fixing of Industrial type switch & socket

MCB in powder coated enclosure complete in all

respects including MCB's and of following ratings:

8.1 20A single phase Ind socket with 20 A, MCB 2 n.o

8.2 32 A single phase Ind socket with 32 A, MCB 2 n.o

8.3 20A THREE phase Ind socket with 20 A, MCB 0 n.o

8.4 32 A THREE phase Ind socket with 32 A, MCB 0 n.o




TOTAL SECTION E


SUMMARY OF COSTS ELECTRICAL SYSTEM INTERNAL

S.N

O

SECTION NAMEAMOUNT

A DISTRIBUTION PANELS & DISTRIBUTION

BOARDSB TELEPHONE & DATA SYSTEM

C POINT WIRING

E MISCELLANEOUS ITEMS

NET TOTAL

BILL OF QUANTITIES (LT PANELS)

All rates quoted shall be for complete finished work

including cost of all labor, material, scaffolding, tools &

tackles, lead lifts etc. and inclusive of all taxes and duties,

octroi, royalties etc. The material used shall be duly

approved by the consultants before incorporation in the

actual works. ;

DISTRIBUTION PANELS


1 MAIN PANEL 1 N.O

SECTION –1

INCOMER

- 200 A, TPN,35 KA, MCCB with following :

a. METERING & CONTROLS

- ON/OFF phase indicating lamps with control fuses .

- Ammeter complete with CT and selector switches as

required.

- Voltmeter complete with selector switches as required.

SECTION –2

BUSBARS

- 250 A, TPN, Al Bus Bars with heat shrinkable PVC

Sleeves – 1 set.

SECTION –3

OUTGOINGS

- 63 A, TPN, MCB – 4 N.o.

- 40 A, TPN, MCB – 6 N.o.

NET TOTAL PANELS

Note : Any indicating lamps to be used, in all the panels, will be LED type and of same make and size.

Note : all energy meters mentioned in this section will be electronic type complete with electromechanical

counter.

A.

C.

Design, supply, erection& commissioning of following

distribution panels made of 2 mm thick CRCA steel

sheets, Floor mounted, fully enclosed,

compartmentalized, dust & vermin proof with hinged &

lockable doors, & complete with earthing, painting as

required and mounted with the following : ( for detail

specs refer technical specifications).

B.


A EARTHING SYSTEM

1 Construction of Earthing stations with following

earth electrodes along with all accessories as per

IS 3043 including excavation of pit IN ROCKY

TERRAIN, fixing of earth electrode, filling in

alternate layers of charcoal & salt, refilling of pit &

providing brick masonry enclosure with CI cover.

(Detailed specifications given separately).

1.1 GI plate electrode- 600 * 600 * 6 mm 2 n.o

1.2 Copper plate electrode- 600 * 600 * 3 mm 2 n.o

1.3 Pipe type earth pit for Lightening Arrestor Nos.

1.4 Chemical Earth pit stations with model T9, 80 mm

dia, CPRI tested, 2mtrs length electrode with 2

bags of chemicals.

0 Nos.

2 Supply & fixing of following type of earth leads

below ground level at 50 cm depth including

excavation IN ROCKY TERRAIN of pit, refilling and

along with heat shrinkable PVC sleeves etc.

2.1 50 * 5 mm copper strip in 80 mm GI Class B pipe

as required.

0 Mtrs

2.2 50 * 5 mm copper strip as required. 0 Mtrs


as required.

0 Mtrs


2.5 50 * 5 mm GI strip in 50 mm GI Class B pipe as

required.

0 Mtrs

2.6 50 * 5 mm GI strip as required. 0 Mtrs


as required.

20 Mtrs


2.9 32 * 6 mm GI strip as required. 50 Mtrs

2.10 8 SWG Copper wire as required 75 Mtrs

2.11 8 SWG GI wire as required 200 Mtrs

2.12 16 sq.mm PVC insulated Cu conductor 20 Mtrs

2.12 70 sq.mm PVC insulated Cu conductor 0 Mtrs

2.13 25 * 3 mm GI strip as required 0 Mtrs

2.14 25 * 5 mm GI strip as required 0 Mtrs

TOTAL- SECTION A

BILL OF QUANTITIES (EARTHING AND CABLING)

All rates quoted shall be for complete finished work including cost of all labor, material, scaffolding,

tools & tackles, lead lifts etc. and inclusive of all taxes and duties, octroi, royalties etc. The material

used shall be duly approved by the consultants before incorporation in the actual works.


B CABLE LAYING & TERMINATION

1 Supply, Laying, testing and Commissioning of the

following sizes of 1100 V grade Copper cables ,

PVC sheathed , armored, PVC insulated, on

existing cable trays/ cable pits/ walls including the

cost of saddles, gut ties, clamps, etc

1.1 4 * 1.5 sq.mm 50 mtrs

1.2 3 * 2.5 sq.mm 50 mtrs

1.3 3 * 4 sq.mm 30 mtrs

1.4 2 * 6 sq.mm 0 mtrs

1.5 4 * 2.5 sq.mm 50 mtrs

1.6 4 * 4 sq.mm 0 mtrs

1.7 4 * 6 sq.mm 0 mtrs

1.8 4*10 sq.mm 0 mtrs

1.8 4*16 sq.mm 0 mtrs

1.9 10*2.5sq.mm Control Cable 10 mtrs

1.10 19*2.5sq.mm Control Cable 0 mtrs

2 Supply, Laying, testing and Commissioning of the

following sizes of 1100 V grade Al cables , PVC

sheathed , armored, PVC insulated, on existing

cable trays/ cable pits/ walls including the cost of

saddles, gut ties, clamps, etc:2.1 4 * 10 sq.mm 0 Mtrs

2.2 4 * 16 sq.mm 50 Mtrs

2.3 4 * 25 sq.mm 0 Mtrs

2.4 3.5 * 35 sq.mm 0 Mtrs

2.5 3.5 * 50 sq.mm 0 Mtrs

2.6 3.5 * 70 sq.mm 0 Mtrs

2.7 3.5 * 95 sq.mm 0 Mtrs

2.8 3.5 * 120 sq.mm 0 Mtrs

2.9 3.5 * 150 sq.mm 60 Mtrs

2.1 3.5 * 185 sq.mm 0 Mtrs

2.11 3.5 * 240 sq.mm 0 Mtrs

2.12 3.5 * 300 sq.mm 0 Mtrs

3 Supplying all materials required for termination

and terminating the following sizes of 1100 V

grade Copper cables , PVC sheathed , armored,

PVC insulated using double compression glands

and copper lugs:3.1 4 * 1.5 sq.mm 10 n.o

3.2 3 * 2.5 sq.mm 10 n.o

3.3 3 * 4 sq.mm 0 n.o

3.4 3 * 6 sq.mm 0 n.o

3.5 4 * 2.5 sq.mm 10 n.o

3.6 4 * 6 sq.mm 0 n.o

3.7 4 * 10 sq.mm 0 n.o

3.7 4 * 16 sq.mm 0 n.o

3.8 10*2.5sq.mm Control Cable 5 n.o

3.90 19*2.5sq.mm Control Cable 0 n.o


4 Supplying all materials required for termination

and terminating the following sizes of 1100 V

grade Al cables , PVC sheathed , armored, PVC

insulated using double compression glands and Al

lugs:4.1 4 * 10 sq.mm 0 n.o

4.2 4 * 16 sq.mm 4 n.o

4.3 4 * 25 sq.mm 0 n.o

4.4 3.5 * 35 sq.mm 0 n.o

4.5 3.5 * 50 sq.mm 0 n.o

4.6 3.5 * 70 sq.mm 0 n.o

4.7 3.5 * 95 sq.mm 0 n.o

4.8 3.5 * 120 sq.mm 0 n.o

4.9 3.5 * 150 sq.mm 4 n.o

4.10 3.5 * 185 sq.mm 0 n.o

4.11 3.5 * 240 sq.mm 0 n.o

4.12 3.5 * 300 sq.mm 0 n.o

5 Supply & installation of overhead cable trays, GI

perforated type, 2 mm thick including horizontal &

vertical bends, reducers, tees, cross members

and other accessories as required. This will

include all material required for installation

including GI suspenders etc. when suspended

from ceiling or Angle irons etc. when grouted in

wall or as per site conditions and requirements.

Width of the cable tray shall be of following sizes:

5.1 40 * 150 * 40 mm 10 Mtrs

5.2 50 * 300 * 50 mm 0 Mtrs

5.3 50 * 450 * 50 mm 0 Mtrs

5.4 50 * 600 * 50 mm 0 Mtrs

5.5 25*50*25 mm 20 Mtrs

5..6 25 *100* 25 mm 20 Mtrs

6 Supply & Laying of heavy duty hume pipe under

the ground for HT/LT cable and of following dia:.

6.1 200 mm dia 20 Mtrs




TOTAL- SECTION B

NET TOTAL (A+B)

FIRE ALARM SYSTEM


1Supply and fixing of following Zones Micro

processor based Fire alarm Control panel with

zonal indications and battery back up as per

detailed specifications

1 Nos.

2 Zone Panel (Each zone consists of 40

devices, isolator after 20 devices)

2 Supply, Installation,Testing & Commisioning of

Repeater Panel with 8 line X 40 characters

alpha numeric LCD display with all commands

such as reset, mute, silence with suitable

battery backup complete as required

1 No

3Supply installation testing and commissioning

of Conventional type smoke detectors with LED

indication lamp along with complete fixing

accessories. Make: Ravel or System sensor

43 Nos.

4Supply installation testing and commissioning

of Conventional type Heat detectors with LED

indication lamp along with complete fixing

accessories. Make: Ravel or System sensor

0 Nos.


Analogue Addressable Intelligent multisensor

detector photothermal type(O2T WITH ALARM

DEVICES) with inbuilt fault

isolator,sounder,flasher and speech unit

complete with base as requiredAddressable

Intelligent Smoke detector photoelectric type

with inbuilt fault isolator,sounder,flasher

and speach unit complete with base as

required.

0 Nos.

BILL OF QUANTITIESFIRE ALARM & DETECTION SYSTEM

All rates quoted shall be for complete finished work including cost of all labor, material,

scaffolding, tools & tackles, lead lifts etc. and inclusive of all taxes and duties, octroi, royalties

etc. The material used shall be duly approved by the consultants before incorporation in the

actual works.

FIRE ALARM SYSTEM


8 Supply installation testing and commissioning

of Manual call points with Glass, hammer and

fixing accessories

2 Nos.


Addressable transponder/ Control Modules 12

output required for tripping AHU's,

pressurisation fans, Lifts, power supply etc.

This shall include all accessories like power

supply, relays etc complete as

required.(Approved Make: Esser)

0 Set

11 Supply installation testing and commissioning

of hooters with all fixing materials.

2 Set

Cabling.

1 Supply, Laying, testing and Commissioning of

the following sizes of 1100 V grade Copper

cables , PVC sheathed , armored, PVC

insulated, on existing cable trays/ cable pits/

walls including the cost of saddles, gut ties,

clamps, etc1.1 2 * 1.5 sq.mm 430 mtrs

TOTAL

BILL OF QUANTITIES (FITTING & FIXTURES)

FITTINGS & FIXTURES


1 Supply. Installation, testing & commissioning of the

following fixtures complete in all respects including chokes,

starters, tube holders, reflector assembly, lamps etc.

A INTERNAL LIGHTING FIXTURES

1.1 6 Watt SURFACE LED Light Fitting ( CAT No. EON

CEIL'O NEO LED or equivalent)

19 n.o

1.2 12 Watt SURFACE LED Light Fitting ( CAT No. EON

CEIL'O NEO LED or equivalent)

22 n.o

1.3 18 Watt LED TUBE Light Fitting ( CAT No. EON

MIROLTALED NEO or equivalent)

96 n.o

1.4 6 Watt Mirror Light (CAT No. EON

MIROLTALED NEO or equivalent)

6 n.o

1.5 1200mm sweep 3 blade Ceiling fan complete with

assembling of blades, down rod, shackle insulator, canopy

etc. ( Cat No. EON - CHAMP50 or equivalent)

62 n.o

1.6 Exhaust Fan 250 mm ( Cat No. EON - FLEETAIR-DX or

equivalent)10 n.o

TOTAL

CCTV SYSTEM


1 Supply, Installation, Testing and commisioning of

CEASEFIRE DOME CAMERA WITH IR : 700TV Lines

Resolution, Image Pick-Up Device -960H CCD, TV

System(NTSC, PAL ), No of Pixels -NTSC=768(H) *

494(V) / PAL=752(H) * 582(V) , Scanning System 2:1

Interlace, Sync System - Internal, Minimum Illumination

0.00001Lux, More than 46dB S/N Ratio, Gamma

Characteristic is r=0.45 Video Output CVBS:1.0Vp-p

75ohm, Electronic Shutter Time

(NTSC=1/60sec~1/100,000sec / PAL=1/50sec~1/100,000sec

, DC 12V Power Supply, Power Consumption CDS

ON:400mA Max, Lens 3.6mm Fixed Board Lens, IR

Day/Night Capability, IR LED × 24 pcs, De-fog function,

Operational Temp. / Humidity -10 ~ +50 Deg C. RH 95%

Maximum

2 n.o


CEASEFIRE BULLET CAMERA WITH IR: 700 TV Lines

Resolution, 3.6MM Fixed Board Lens, 850mm IR LEDs *

24pcs, 1/3” 960H CCD, Highest Resolution - Vivid sharp

pictures in complete darkness, TV System (NTSC, PAL), No.

of Pixels (NTSC-768(H) * 494(V)/PAL = 752 (H)*582(V),

Scanning System 2:1 Interface, Sync System - Internal,

0.00001Lux Minimum Illumination, More than 50dB S/N

Ratio, White Balance (ATW/AWB/FIXED/MANUAL),

Gamma Characteristic is r=0.45, Video Output

(CVBS:1.0Vp-p 75ohm), Electronic Shutter Speed-

NTSC=Auto/Manual(1/60sec~1/

100,000sec)/PAL=Auto(1/50sec~1 / 100,000sec), De-fog

function, DC 12V Power Supply, Power Consumption -

120mA/IR ON 400mA, Operation Temp / Humidity (-10 ~

+50 Deg C. RH 95% Max).

12 n.o

BILL OF QUANTITIES CCTV SYSTEM




actual works.

CCTV SYSTEM



CEASEFIRE DVR 16 CHANNEL:Video Mode:

NTSC/PAL, Operating System : Embedded Linux,

Compression: H-264 / G.723 (Audio), Video Input: 16Ch,

Video Output: 16 Loop out, 1BNC, 1VGA, 1Spot, [Speed]

Live Display: 480fps(NTSC) , 400fps 240fps(PAL), [Speed]

Recording:480fps(NTSC) ,400fps 240fps(PAL), Recording

Resolution: NTSC - D1 (704 x 480), Field (704 x 240), CIF

(352 x 240), PAL - D1 (704 x 576),Field (704 x 288), CIF

(352 x 288), Live Display: 1/4/9/16/Sequence, LCD Display

Resolution: SXGA (1280 x 1024), TV Display

Resolution:NTSC - SDTV (720 x 480), PAL - SDTV (720 x

576), Recording Mode: Auto, Continuous, Motion, Sensor,

Audio: Input (4Ch), Output (1Ch),Sensor/Relay: Sensor

input (16Ch), Relay output (4Ch-NC/NO) (1Ch), TTL (3Ch),

HDD Capacity: Max. 2HDD, Backup: USB 2.0, DVD-

RW,Network, Network: ADSL, Cable Modem, LAN

(Ethernet), Power Supply: DC 12V/5A, Power Consumption:

40W, Operating Temperature:5~400C, Weight: 4000 gms,

Dimensions: 430(W) x 86(H) x 270(D) mm

1 n.o

5 Supply, Installation, Testing and commisioning of 32"

inches LCD monitor

1 n.o

6Supply, Installation, Testing and commisioning of Power

Supply(5mA) ( Support Up to 4 Cameras )

4 n.o

TOTAL- SECTION

PA SYSTEM


1 Supply and installation of Voice Alarm System Controller

suitable for 6 zones having built in 240 watt amplifier,

Freq response 60 to 18000 Hz, distortion <1%, S/N Ratio

>75 dB having memory capacity 16MB flash ROM, Max

messages 255

1 n.o

2Supply and installation of Booster Amplifier 240 W

1 n.o

3 Supply and installation of Plena All-in-one runs MP3 AM /

FM ( Music Source )

1 n.o

4 Supply and installation of speaker 24W Column Loud

Speaker, Ceiling/wall mounted complete with all accessories.

7 n.o

5 Supply and installation of speaker 6W Ring type Loud

Speaker, Suitable for False Ceiling mounted complete with

all accessories.

0 n.o

6 Supply and installation of speaker 6W Ring type Loud

Speaker, Suitable for Surface mounted complete with all

accessories.

3 n.o

7 Supply and installation of Table Top microphone 1 n.o

8 Supply and installation of Rated power 36w, Volume

Control Attenuation step 5x3db+off, Frequency response

50Hz to 20kHz (-1 dB) as per detailed technical specification

as required.

5 n.o

9 Supply and installation of MS Equipment Rack to place the

Amplifiers Player, and motioned all the above devises,

having regulated power supply strip for all the devices, door

lock and key, openable from front and rear, and required

devises as per detailed technical specification as required.

1 n.o

TOTAL- SECTION J

BILL OF QUANTITIESPA SYSTEM




actual works.

S.No ITEM MANUFACTURE

1 HV/MV/LV/ELV CABLE-XLPE INSULATED AS PER HAVELLS

IS:7098 AND COPPER WIRES AS PER IS:694/1990 POLYCAB

KEI

2 UPS Numeric

Delta

3 BATTERIES FOR UPS Exide

Amarraja (Quanta)

4 1.1KV COPPER WIRES AS PER IS:694/1990 PolyCab

AND T.V. CO-AXIAL CABLE HAVELLS

SKYTONE

5 HV CAPACITOR/MV CAPACITOR/ APFCR/REACTOR Schneider

ABB

EPCOS

6 CURRENT/POTENTIAL TRANSFORMERS KAPPA

NOTE:- FOR HT PANEL, CT, PT, SHALL BE AS PER Minilec

STANDARD FITMENT OF PANEL MANUFACATURES PRAGATI

ELMAX

PRECISE

TRANSTECH

7 BATTERIES CHARGERS STATE ON,

VOLTAMP,

LOGICSTAT

8 MCB/ELCB/DB/RCCB/MPCB LEGRAND

Industrail Sockets-Sheet Metal Clad SCHENIEDER

HAGER

ABB

9 CT SHORT LINK / NEUTRAL LINK/ ELMAX

TERMINAL BLOCK TOSHIBA

FTC

PHOENIX

CONNECT

10 SELECTOR SWITCHES / ROTARY SWITCHES LEGRAND

SALZER

C & S

LIST OF APPROVED MAKES

11 TIME SWITCHES L & T

MDS

SCHENIEDER

MINILEC

12 LED TYPE INDICATING LAMPS , PUSH BUTTONS L & T

ABB

SCHENIEDER

KAYCEE

C & S

TEKNIK

VAISHANO

13 PUSH BUTTONS ACTUATOS L & T ( ESBEE)

ABB

SCHENIEDER(MG)

C & S

MDS

14 RCC HUME PIPE Pooja Cement Udyog

Dynamic Concrete Products

Jain Spun Pipe Co.

Hindustan Pipe Co.

15 HV CABLE JOINTS RAYCEM

(indoor/outdoor) MAHINDRA ( M-SEAL)

BIRLA 3M

16 CABLE TRAYS / RACEWAY ERA Control System

BEC

Aditya Steel Industries

Anubhav Power & Control

17 D.G.SETS SUPPLIER/MANUFACTURERS SUDHIR

CATERPILLER

KIRLOSKAR

STERLING & WILSON

Cotton Greaves

18 LIGHT FIXTURES BAJAJ

HAVELLS

19 G.I. POLES AND ARMs. BAJAJ

PHILIPS

20 PVC CONDUIT & ACCESSARIES BEC

SUDHAKAR

21 SWITCHES & SOCKET MODULAR TYPE LEGRAND-ARETEOR

SCHENIEDER-OPALE

22 CRIMPING TYPE LUGS & THIMBLES DOWELLS

COMET

ACTION

ASIAN

Jointwel

23 CABLE GLANDS

23A BRASS CABLE GLANDS DOWELLS

COMMET

POLYCAB

23B PVC CABLE GLANDS HAVELLS

TRINITY

LOTUS

24 FANs BAJAJ

CROMPTON GREAVES

HAVELLS

USHA

25 HDPE PIPE Dura-Line

REX

BEC

GEMINI

26 M.S. CONDUIT & ACCESSARIES BEC

AKG

FITWELL

27 G.I. CONDUIT & ACCESSARIES TATA

RAVINDRA TUBES LIMITED

BEC

28 PANEL COOLING FANS Rexonard

Rittal

HAVELLS

PHILIPS

29 RELAYs MINILEC

PROK DEVICES

ASHIDA

SAME MAKE OF SWITCHGEAR

30 SWITCHES & SOCKET PIANO TYPE LEGRAND-ARETEOR

SCHENIEDER-OPALE

31 MULTIFUNCTION METERS/TVM ENERSOL

DOOR MOUNTED DUAL SOURCE ENERGY METERS AMLT

TRINITY

SAME MAKE OF SWITCHGEAR

32 BASE MOUNTED WHOLE CURRENT ENERSOL

DUAL SOURCE ENERGY METERS TRINITY

SECURE

ELMEASURE

33 LAMP & BALLAST OSRAM

PHILIPS

HAVELLS

BAJAJ

HALOMAX

34 AIR CIRCUIT BREAKER (ACB) Siemens (3WL)

ACBs (Up to 50kA) Schneider-MVS

ABB(E-Max)

L&T-Larsen & Toubro (C-POWER)

35 ACBs (above 50kA) Siemens (3WL)

Schneider-NW

ABB(E-Max)

L&T-Larsen & Toubro (U-POWER)

36 MULDED CASE CIRCUIT BREAKER (MCCB) Siemesn-3VL

Spreder Links & Extended Rotary Handle L&T-Larsen & Toubro (D-SINE)

(Same Make of Switchgears) Schneider-NSX

ABB (T-Max)

37 PLC ABB(AC500)

Siemens(S7400)

Schneider(Quantum)

38 SOFT-STARTER/SFU/SDF/HRC FUSE ABB

SCHNEIDER

SIEMENS

39 BY-PASS SWITCH HAVELLS

HPL-SOCOMEC

C&S

40 CHANGE OVER SWITCH L&T-Larsen & Toubro

ABB

C&S

41 THERMOPLASTIC/POLYSTYRENE BOX HENSAL

POLYCARBONATE ENCLOSURE CLIPSAL

TRINITY

42 Under Floor POP-UP- BOX LEGRAND

M.K.

ANCHOR

43 Maintenance free chemical earthing JNR Grounding System

ENNOV INFRA SOLUTIONS (P) LTD.

ASH GEL EARTHING ELECTRODE

ADITYA POWER GROUP

44 INVERTER MICROTECH

V-GUARD

SU-KAM

LUMINOUS

45 Fabrication Sheet Tata Sheet

Bhushan Steel

Jindal Iron & Sheet

46 Aluminium Busbars Hindalco

47 Cooper Bus-bars RR Cooper

48 MV/LV PANEL & CAPACITOR FEBRICATOR Sudhir Gensets Limited

Risha Control Engineers Pvt. Ltd.

SPC Electotech Pvt. Ltd

Adlec Systems Private Limited In Delhi

Vidhyut control (India) Pvt. Ltd.

49 FAS-RAVEL male model Edward fully addressable.

50

Bosch amplifier with USB port .(u decide the model based

on the easy avaibility).

51

HVAC-Bluestar –check does we get the model to

accommodate with the chiller lines inthis make .

52 Stabilizer –servomax.

53

CCTV-IP based CCTV system make with 45days motion

recording capacity. :Envision

IT Networking

a.

b.

c.

d.

Submitals and sampels must be gotten approved before supply from Client / Project / Managers /

Architect / Consultants.

Instruction to bidders:

Submit catalogues/Data Sheets/Manuals with the offers.

Final choice of makes among the approved list shall rest with the Client / Project Managers /

Architect / Consultants.

Produce test certificates for equipment/material supplied with bills for certification.

a internal works c lt panel d earthing and cabling … · 2019-07-06 · 1.7 12 way vtpn...

Documents