a canadian company impression materials · fax: 1.800.361.5088 email: [email protected]...
TRANSCRIPT
Fax: 1.800.361.5088 Email: [email protected] 297
A C A N A D I A N C O M PA N Y
In Partnership with
Impression Materials
Product Portfolio
In Partnership with
Plug & PressHeavy/Med./Soft ..........303-306, 308, 320-323Putties..................................................310-313
Alginate Replacement-Cartridge and P&P ....298-300
Putty in Tub ............................................314-319
Medium Body Cartridge ..................................308
Light Body Cartridge ........................307, 324-329
Bite Registration ......................................330-335
Denture Reline ................................................336
Plug & Press System ......................................338
Accessories ....................................................340
Adhesives ......................................................341
Tips ................................................................342
Technical DataProduct name Mixing
ratioTotal working time at
Intraoral settingtime at
Total setting Hardness (approx.)Shore
Linear dimensional change(max.) %
Elastic recovery (approx.) %
Strain in compression (approx.) %
Silginat®
Foil bag 5:1 1 minute30 seconds
1 minute30 seconds 3 minutes A 42 - 0,20 % 99,5 % 7,2 %
* Total setting time (removal time from the mouth) from the start of mixing.
Anatomical impression material
®
®
Anatomical impression material |
www.aurumgroup.com Toll Free: 1.800.661.9567298
Intro pack 362 ml REF 43.7311 x 300 ml base, 1 x 62 ml catalyst 10 dynamic mixers, 1 cartridge body
2 x 300 ml base, 2 x 62 ml catalyst
Economy pack 2172 ml REF 43.7336 x 300 ml base, 6 x 62 ml catalyst
Silginat®
The new standard for opposing jaw impressionsMedium viscosity, addition-curing, elastomeric anatomical impression material based on vinyl polysiloxane.
Modern A-silicones now ensure an optimal impression when taking precision impressions and bite registrations. Why dispense with the convenience and quality of an A-silicone when taking opposing jaw impressions?
Silginat® has been specially developed for taking impressions of the opposing jaw, temporary crowns and bridges and fabricating splints and incorporates the advantages of A-silicones and alginates: it combines low tear resistance with
conjunction with the Plug & Press® mixing unit Sympress® Dispenser.
Elastic recovery of a modern A-silicone; the ideal complement to precision impression-taking.
The impression can be stored for several weeks; allows renewed, even multiple pouring, e.g. in the case of fracture or loss of temporary restorations.
SUGGESTED IMPRESSION TECHNIQUE
Monophase
INDICATIONS
Anatomical impressionFabricating temporary crowns and bridgesOpposing dentitionFabricating simple removable prosthetic restorations Orthodontic workCase study models
Producing models for the construction of bleaching trays, mouth guards and surgical guides
highly recommendedrecommended
Anatomical impression material | tomical impAna terial |pression ma
Silg ®inat
impreThe n
essionsnew standard ffor opposing jawa
d ttempor,wja
ha®tSilgina
A-silicof animpressions
A-sModern
based on viMedium vis
impre
ittA ili d l ifwns and bridges and fabricay crorar
as been specially developed for taking impressions of
wcone when taking opposing jaWhy ditions.s and bite registra
w ensure an optimasilicones no
yl polysiloxane.inelastomaddition-curing,,scosity
essions
t i tt bi lting splints and incorporaabrica
the oppr taking impressions of
w impressions?ispense with the convenience aal impression when taking prec
tomical impression mameric ana
ithtes thea
posing
and quality cision
terialma
A
Opposintb iF
tbricaFatomiAna
Monoph
ATICDIIN
ESSUGG
S
blng dentitionti i l
y crowns and bridgesting temporarical impression
ase
ONTI
EQUICHNTEONIMPRESSISTED
iThe impre
impressioElastic re
conjunction
gesadvanta
i th f f t lession can be stored for severa
on-taking.A-silicone;y of a moderncover
mixing®n with the Plug & Press
ittes:A-silicones and alginas of
titf tevews renewed,al weeks; allo
the ideal complement to prec
.Dispenser®g unit Sympress
w tear resistancet combines lo
n multiple
ision
e withprosthet
guidesbleachinProducin
Case study modelsOrthodo
tbricaFa
hr
ica
tions
mouth guards and surgys,ng traor the construction of ng models f
udy modelsntic worktic restora
bleting simple remova
highly recommendedrecommended
l
epouring, in the case of fracture or loe.g. tions.y restoraoss of temporar
Fax: 1.800.361.5088 Email: [email protected] 299
at
Silginat® 5:11 minute30 seconds
1 minute30 seconds
3 minutes A 42 – 0.20 99.5 7,2
Silginat®
Type 2, medium-bodied
355:1,362 mlfoil bag
Plug & Press® dispenser or other automatic mixing and dispensing unit
Dynamicmixer
Light pink Neutral
*) Total setting time (removal from the mouth) from the start of mixing.
combination of crisp detail and precision for optimal impressions.
Easy handling. The Plug & Press® mixing unit Sympress® Dispenser
Dust and contamination, inaccurate or over dispensed
User and patient-friendly setting characteristics. Adequate setting time, short intraoral setting time.
High thixotropy. -
Low tear resistance. Easy removal from the mouth, which prevents accidental loosening of prosthetic restorations or orthodontic appliances.
Disinfectable. Impressions can be easily disinfected, remain dimensionally stable and do not swell.
Impressions can be poured immediately. Silginat® impressions can be poured immediately following removal from the mouth. The impressions can also be poured several times.
easy handling For temporary crowns and bridges
Can be poured several times Disinfectable
www.aurumgroup.com Toll Free: 1.800.661.9567300
Precision impression material
material therefore becomes the most important criterion next to the professional skill of the
® (VSXE) ®
Precision impression material |
Fax: 1.800.361.5088 Email: [email protected] 301
Technical DataProduct name Mixing
ratioWorking time at23° C/74° F
Working time at35° C/95° F
Intraoral settingtime at35° C/95° F
Total setting
Hard-ness(ap-prox.)Shore
Lineardimensio-nalchange(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion(approx.)%
VSXE
Identium® Heavy 5:1 2 minutes 80 seconds 3 minutes 30 seconds
5 minutes 30 seconds A 60 – 0.20 99.0 2.8
Identium® Heavy fast 5:1 1 minute15 seconds 40 seconds 2 minutes
15 seconds3 minutes 30 seconds A 60 – 0.20 99.0 2.8
Identium® Medium 5:1 2 minutes 80 seconds 3 minutes 30 seconds
5 minutes 30 seconds A 60 – 0.20 99.0 2.3
Identium® Medium fast 5:1 1 minute15 seconds 40 seconds 2 minutes
15 seconds3 minutes 30 seconds A 60 – 0.20 99.0 2.3
Identium® Medium soft 5:1 2 minutes 80 seconds 3 minutes 30 seconds
5 minutes 30 seconds A 50 – 0.20 99.0 3.3
Identium® Light 1:1 2 minutes 80 seconds 3 minutes 30 seconds
5 minutes 30 seconds A 46 – 0.20 99.0 3.8
Identium® Light fast 1:1 1 minute15 seconds 40 seconds 2 minutes
15 seconds3 minutes 30 seconds A 46 – 0.20 99.0 3.8
VPS
Monopren® transfercartridge 1:1 2 minutes 1 minute 2 minutes 4 minutes A 60 – 0.20 99.7 3.5
Monopren® transfer tube 1:1 2 minutes45 seconds 1 minute 2 minutes
15 seconds 5 minutes A 60 – 0.20 99.7 3.5
Monopren® transferfoil bag 5:1 2 minutes 1 minute 2 minutes 4 minutes A 60 – 0.20 99.7 3.5
Panasil® bineticsputty fast 5:1 1 minute
30 seconds N/a 2 minutes 30 seconds 4 minutes A 63 – 0.20 99.5 2.5
Panasil® bineticsputty soft 5:1 2 minutes N/a 3 minutes 5 minutes A 56 – 0.20 99.5 3.5
Panasil® putty 1:1 2 minutes N/a 2 minutes 4 minutes A 66 – 0.20 99.0 2.7
Panasil® putty fast set 1:1 1 minute30 seconds N/a 2 minutes 3 minutes
30 seconds A 66 – 0.20 99.0 2.7
Panasil® putty soft 1:1 2 minutes N/a 2 minutes 4 minutes A 60 – 0.20 99.0 2.7 Panasil® tray fastheavy 5:1 1 minute
20 seconds N/a 2 minutes 3 minutes 20 seconds A 62 – 0.20 99.7 2.5
Panasil® tray soft heavy 5:1 2 minutes N/a 2 minutes 4 minutes A 55 – 0.20 99.7 3.0Panasil® initial contactregular 1:1 1 minute
30 seconds 1 minute 2 minutes 30 seconds 4 minutes A 46 – 0.20 99.7 3.0
Panasil® contacttwo in one light 1:1 2 minutes 1 minute 2 minutes 4 minutes A 46 – 0.20 99.7 3.5
Panasil® initial contactlight 1:1 1 minute
30 seconds 1 minute 2 minutes 30 seconds 4 minutes A 46 – 0.20 99.3 3.5
Panasil® contact plusx-light 1:1 2 minutes 1 minute 2 minutes 4 minutes A 46 – 0.20 99.7 5.0
Panasil® initial contactx-light 1:1 1 minute
30 seconds 1 minute 2 minutes 30 seconds 4 minutes A 46 – 0.20 99.3 3.5
* Total setting time (removal from the mouth) from the start of mixing.
www.aurumgroup.com Toll Free: 1.800.661.9567302
Identium®
Medium orMedium fast
Identium® – the best of two worlds.Identium® Medium is a medium viscosity, addition-curing elastomeric impression material based on Vinylsiloxanether®
Identium® Medium has been specially developed for the one-step impression technique and combines the best of two worlds: all the advantages of polyether materials coupled with those of A-silicones.
The highly elastic properties of Identium® Medium ensure dimensionally accurate recovery and very easy removal. Identium® Medium is also odorless and has a neutral taste.
Based on the entirely new material of Vinylsiloxanether®, Identium® Medium
achievable contact angle of less than 10° after 1 second), ensuring optimal
Medium Medium Fast
1 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body, 10 ml adhesive, 1 application syringe
2 x 300 ml base, 2 x 62 ml catalyst
6 x 300 ml base, 6 x 62 ml catalyst
Vinylsiloxanether® (VSXE) Precision impression material
Precision impression material |
Monophase
One-step impression technique (simultaneous technique)
Functional impressions
Implant impressions
Impressions for crowns/bridges/inlays/ onlays and veneer preparations
highly recommendedrecommended
Precision impress
Identerial |sion ma
®ntium
MedMedIden
dium fasdium or
®ntium
st
Identiu – the bes®um st of two worldPrecision
ylsiloxinVds.n impression material
(VSXE)®xanether
The highly ela
terials coumatechnique an
Me®Identium
terial basemaMe®Identium
®astic properties of Identium
A-siliconupled with those ofd combines the best of two worlds:edium has been specially de
®ylsiloxanetherVined onedium is a medium viscosity
Medium ensure dimension®
es.ges oall the advantaworlds:
eveloped for the one-step impression
addition-curing elastomeri,y
tenally accura
of polyethermpression
c impression
Monophase
Functional impressions
(simultaneoOne-step im
e
mpressions
ous technique)mpression technique
achievable
Based on the
neutral taste.y andrecover
contact angle of less than 1
Vinterial ofe entirely new ma
Identiumy easy removal.ver
ensuring0° after 1 second),
M®Identium,®ylsiloxanethern
Medium is also odorless®m
g optimal
Medium
and has aImplant imp
ys andonlaImpressions f
Functional impressions
highreco
pressions
tionsveneer preparays/or crowns/bridges/inlas f
mpressions
ly recommendedmmended
Fax: 1.800.361.5088 Email: [email protected] 303
Identium® Medium is a medium viscosity impression material with
taking impressions in implantology and for the fabrication of crowns/
impressions.
Technical Data – Identium MediumProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoralsetting time at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensio-nal change(max.) %
ElasticRecovery test(approx.)%
Strain incompres-sion(approx.)%
Identium® Medium 5:1 2 minutes 80 seconds3 minutes30 seconds
5 minutes30 seconds
A 60 – 0.20 99.0 2.3
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Identium® MediumType 2, medium-bodied
365:1,362 mlfoil bag
Plug & Press®
dispenser or other automatic mixing and dispensing unit
mixer
Product Advantages
stability, constantly guaranteed throughout the entire working time.
mouth.Balanced setting behavior
Accurate model fabrication Minimum risk of fracture when removing the impression.In the practical Plug & Press® mixing unit Sympress® system; compatible
immediately.
Precision impression material (Vinylsiloxanether®)
The Identium® Medium/Medium Soft/Heavy/Light Advantages and Benefits
Identium®. A perfectly balanced impression material.
Identium® after 1 sec.: contact angle < 10°
Contact angle measurement
Identium®
Patient comfort
Reactionkinetics
Flowability
Hydrophilicity
Elastomeric properties
Transferability
www.aurumgroup.com Toll Free: 1.800.661.9567304
Identium®
Medium soft
Intro pack 362 ml REF 43.743 1 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body, 10 ml adhesive, 1 application syringe
2 x 300 ml base, 2 x 62 ml catalyst
Economy pack 2172 ml REF 43.745 6 x 300 ml base, 6 x 62 ml catalyst
Identium® – the best of two worlds.Identium® Medium soft is a medium viscosity, addition-curing elastomeric impression material based on Vinylsiloxanether®
Identium® Medium soft has been specially developed for the one-step impression technique and combines the best of two worlds: all the advantages of polyether materials coupled with those of A-silicones.
The highly elastic properties of Identium® Medium soft ensure dimensionally accurate recovery and very easy removal. Identium® Medium soft is also odorless and has a neutral taste.
Based on the entirely new material of Vinylsiloxanether®, Identium® Medium soft provides the
the narrowest sulcus crevices.
Precision impression material |
Vinylsiloxanether® (VSXE) Precision impression material
SUGGESTED IMPRESSION TECHNIQUE
Monophase
One-step impression technique (simultaneous technique)
INDICATIONS
Functional impressions
Impressions for crowns/bridges/inlays/ onlays and veneer preparations
highly recommendedrecommended
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoralsettingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensio-nal change(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion(approx.)%
Identium® Medium soft 5:1 2 minutes 80 seconds 3 minutes 30 seconds
5 minutes 30 seconds A 50 – 0.20 99.0 3.3
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Identium® Medium softType 2, medium-bodied
365:1, 362 mlfoil bag
Plug & Press®
dispenser or other automatic mixing and dispensing unit
Dynamicmixer
Gray blue Neutral
Id
Precision impre
®i
terial |ession ma
MeIde
edium so®entiumoft
on VinbasedM®Identium
Ident®ylsiloxanethern
,Medium soft is a medium viscosity
– the be®tiumaddition-curing elastomeric impression ma,
est of two worPrecisi
ylsiinV
terialression ma
lds.ESSUGG
ion impression material(VSXE)®loxanether
EQUICHNTEONIMPRESSIDSTE
wthe narro
Based on the
y easand verThe highly e
the best of twMe®Identium
on Vinbased
west sulcus crevices
ylsiloVinterial ofe entirely new ma
Medium sof®Identiumsy removal.Med®lastic properties of Identium
ges of polyether maall the advantawo worlds:edium soft has been specially developed for the one-step impression technique and combines
®ylsiloxanethern
Medium so®Identium,®oxanether
ft is also odorless and has a neutral taste.dium soft ensure dimensionally accura
terials coupled with those ofether maped for the one-step impression technique and combines
oft provides the
ral taste.yte recoverccura
A-silicones.nique and combines
A
(simulta
ys aonlaImpressions f
Functional impressions
Monoph
ATICIIND
ES
One-ste
SUGG
S
neous technique)
tionsand veneer preparays/or crowns/bridges/inlaions f
nal impressions
ase
ONTI
E
p impression technique
QUICHNTEONIMPRESSIDSTE
wthe narro
echnical DataTP d t
west sulcus crevices.
cal DatakiWMi i tTTI t lkiW
hr
LiH dt l
highly recommendedrecommended
Product name
Med®Identium
Product name
e
ium soft 2 minut5:1
23° C/time at
orkinWratioMixing
mm(apConISO 4823
305 m
30 seconds3 minutes80 secondstes
setotTTotal
35° C/time atsettingIntraoral
35° C/time at
orkingWtng
Mix
Plunitcontent volume per Mixing ratio and total
mprox.)
ynsistenc
(max.) %
– 0.20A 50secondsminutes
nal change-dimensio
Linear
Shore(approx.)Hardness
ttingtal
Mixing element
®& P
xing technique
%
3.399.0
(approx.)sioncompres-Strain in
%(approx.)test
yverRecoElastic
Odor/tasteColour
Med®Identium ium soft 36medium-bodiedype 2,TType 2,
andautdisPlu
gfoil ba362 ml5:1,
mixerynamicD
d dispensing unittic mixingtoma
spenser or other
®ug & Press
eutralNray blueG
Fax: 1.800.361.5088 Email: [email protected] 305
Here used in combination with Identium® Lightin the double mix impression technique
Identium®
Heavy or Heavy fast
Heavy Heavy fast
Intro pack 362 ml + 50 ml REF 43.746 REF 43.603 1 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body, 1 x 50 ml Light body, 6 mixing tips, 6 application tips, 10 ml adhesive
2 x 300 ml base, 2 x 62 ml catalyst
Economy pack 2172 ml REF 43.748 REF 43.605 6 x 300 ml base, 6 x 62 ml catalyst
Current prices are available from our distributors. Not all products/packages are available in all markets.
Identium® – the best of two worlds.Identium® Heavy is a high viscosity, addition-curing elastomeric impression material based on Vinylsiloxanether®
Identium® Heavy has been specially developed for the one-step impression technique and combines the best of two worlds: all the advantages of polyether materials coupled with those of A-silicones.
The highly elastic properties of Identium® Heavy ensure dimensionally accurate recovery and very easy removal. Identium® Heavy is also odorless and has a neutral taste.
Based on the entirely new material of Vinylsiloxanether®, Identium® Heavy provides the following
Precision impression material |
Vinylsiloxanether® (VSXE) Precision impression material
SUGGESTED IMPRESSION TECHNIQUEOne-step impression technique (simultaneous technique)
INDICATIONS
Functional impressions
Implant impressions
Impressions for crowns/bridges/inlays/ onlays and veneer preparations
Impressions about full or partial denturehighly recommendedrecommended
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoralsetting time at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensio-nal change(max.) %
ElasticRecovery test(approx.)%
Strain incompres-sion (approx.)%
Identium® Heavy 5:1 2 minutes 80 seconds3 minutes 30 seconds
5 minutes 30 seconds
A 60 – 0.20 99.0 2.8
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing ele-ment
Colour Odor/taste
Identium® HeavyType 1, heavy-bodied
325:1, 362 mlfoil bag
Plug & Press® dispenser or other automatic mixing and dispensing unit
Dynamicmixer
Light blue Neutral
Iden ®ntiumPrecision terial |impression ma
HeaHeaIden
vy fastavy ora
®ntium
vHea®Identium
Identiuaddition curivy is a high viscosity
– the bes®um
in the double mix impressiotion wHere used in combina
tering elastomeric impression ma
st of two world
on techniqueLight®with Identium
PrecisionylsiloxinV
ial based on
ds. n impression material(VSXE)®xanether
Based on the en
y easy removverThe highly elast
the best of two wvyHea®Identium
ylsiloxanetheVinvHea®Identium
ylsiloxanVinterial ofntirely new ma
vy is also odorlHea®Identiumval.vy eHea®tic properties of Identium
ges of polyetall the advantaworlds:y has been specially developed for the one-step impression technique and combines
®eraddition-curi,vy is a high viscosity
vy providesHea®Identium,®nether
ess and has a neutral taste.te recensure dimensionally accura
terials coupled with those of ther mathe one-step impression technique and combines
tering elastomeric impression ma
wing s the follo
y andcover
A-silicones.ofe and combines
ial based on
O
Implant imp
ys and veneer preparaonlaImpressions f
(simultaneo
Functional impressions
TIICAATIDNI
ESTEOne-step im
SUGG
NS
pressions
tionsveneer preparays/or crowns/bridges/inlas f
ous technique)
mpressions
O
Empression technique
QUTECHNINOPRESSIMIDE
h i lT l D t
y
Impressions ahigh
p p
bout full or partial dentures aly recommended
vailaC
echnical DataT
Cv
Product name
vys are aHeaHea
es®®urrent pricIdentiumIdentium
Current prices are a
Product name
s
l Data
sable from our di tribu5 1
roducts/pac2 minutes2 minutes
Not all products/packa5:1
stributors.
23° C/time at
orkingWratioMixing
(approx )ConsistenISO 4823
ea s are a80 se
all markets.3 minutes30 seconds5 minutes
30 seconds3 minutesvailable in all markets.
8 d80 secondsges are available in all markets.
setting otalTTotal
35° C/time atsetting Intraoral
35° C/time at
orkingW
Mixing tecontent volume per Mixing ratio and total ync
99.
%
– 0.20A 60ondstes
(aptesRe
(max.) %nal change
-dimensioLin
Shore(approx.)Hardness
g
Cment
-Mixing eleechnique
2.8
%
.0
(approx.)sion compres-
pprox.)st
yvereco
Odor/tasteColour
vyHea®Identium
mm
32vy-bodiedhea
ype 1,TType 1,
(approx.)unit
and dispor otherPlug & P
gfoil baml3625:1,
content volume per ment
iynamicD
pensing unittic mixingautoma
dispenser ®PressNeutralLight blue
www.aurumgroup.com Toll Free: 1.800.661.9567306
Identium®
Light orLight fast
Here used in combination with Identium® Heavy in the double mix impression technique
Light Light fastNormal pack 100 ml REF 43.738 REF 43.606 2 x 50 ml cartridge, 12 mixing tips, 12 application tips
Economy pack 600 ml REF 43.739 REF 43.607 12 x 50 ml cartridge, 72 mixing tips, 72 application tips
Identium® – the best of two worlds.Identium® Light is a low viscosity, addition-curing elastomeric impression material based on Vinylsiloxanether®.
Identium® Light has been specially developed for the one-step impression technique and combines the best of two worlds: all the advantages of polyether materials coupled with those of A-silicones.
The highly elastic properties of Identium® Light ensure dimensionally accurate recovery and very easy removal. Identium® Light is also odorless and has a neutral taste.
Based on the entirely new material of Vinylsiloxanether® Identium® Light
the narrowest sulcus crevices.
Vinylsiloxanether® (VSXE) Precision impression material
SUGGESTED IMPRESSION TECHNIQUE
One-step impression technique (simultaneous technique)*
INDICATIONS
Implant impressions
Impressions for crowns/bridges/inlays/ onlays and veneer preparations
Impressions about full or partial denture
highly recommendedrecommended
*in combination with Identium® Heavy
Precision impression material |
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoralsettingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensio-nal change(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion(approx.)%
Identium® Light 1:1 2 minutes 80 seconds3 minutes30 seconds
5 minutes30 seconds
A 46 – 0.20 99.0 3.8
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Identium® LightType 3, light-bodied
42 1:1, 50 ml cartridge® 4 dispensing
gun DS-50 1:1/2:1Yellow mixing tip MB Ø 4.2 mm
Purple Neutral
Iderecision impreP
®entiumterial |ession ma
LigLigIde
ht fastht or
entium
ylsiloxanetVinLig®Identium
Identi
in the double mix imprestioHere used in combina
®theraddition-curi,w viscosityht is a lo
– the be®ium
ssion techniquevyHea®on with Identium
tering elastomeric impression ma
est of two worl PrecisiylsiinV
ial based on
ds. ion impression material(VSXE)®loxanether
Based on the
easy removal.The highly ela
A-silicones.combines the
Lig®Identium
ylsiloxanetVin
ylsiloxVinterial ofentirely new ma
Light is also odorless®Identium.Light®astic properties of Identium
all the advantbest of two worlds:ht has been specially developed f
.®ther
Light®Identium®xanether
and has a neutral taste.te ret ensure dimensionally accura
terials couplges of polyether matafor the one-step impression technique and
yy and verecover
led with those ofique and
A
ys a
Impressions a
Implant
onlaImpressions f
(simulta
ATICIDNI
ES
One-ste
SUGG
NS
tions
bout full or partial dentureions a
impressions
and veneer preparays/or crowns/bridges/inlaions f
neous technique)*
OTI
E
ep impression technique
QUHNICTENORESSIMPIDSTE
wethe narro
echnical DataT
est sulcus crevices.
cal Data
h
*i birhighly recommended
H®ti ith Id tirecommended
Product name
Light®Identium
Product name
e
t 2 minut1:1
23° C/time at
orkinWratioMixing
mm(apConISO 4823
30 seconds5 m
30 seconds3 minutes
80 secondstes
setotTTotal
35° C/time atsettingIntraoral
35° C/time at
orkingWtng
Mix
unitcontent volume per Mixing ratio and total
mpprox.)
ynsistenc
(max.) %
– 0.20A 46seconds
minutes
nal changedimensioL
Shore(approx.)Hardness
ttingtal
Mixing elementxing technique
3.8
%
99.0
(approx.)sioncompres
%(approx.)test
yverReco
Odor/tasteColour
Light®Identium
mm
t 42light-bodiedype 3,TType 3,
unit
gun 50 ml cartridge1:1,
m
B Ø 4.2 mmMw mixing tipelloYYello
S-50 1:1/2:1Dn4 dispensing ®
NeutralurpleP
Fax: 1.800.361.5088 Email: [email protected] 307
Monopren®
transfer
Normal pack 100 ml REF 43.7792 x 50 ml cartridge + 12 mixing tips
Economy pack 1240 ml REF 43.78012 x 50 ml cartridge, 72 mixing tips
Intro pack 362 ml REF 43.6901 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body
2 x 300 ml base, 2 x 62 ml catalyst
Economy pack 2172 ml REF 43.6926 x 300 ml base, 6 x 62 ml catalyst
Current prices are available from our distributors. Not all products/packages are available in all markets.
impression-takingMedium viscosity, addition-curing, elastomeric monophase impression material based on vinyl polysiloxane. Syringeable.
Monopren® transfer is an impression material with initial hydrophilicity that
removable restorations and in implantology:
Produces improved retention of the implant abutment when used in combination with Futar® D Slow.
Precision impression material |
Monophase
One-step impression technique (simultaneous technique)
Functional impressions
Implant impressions
Impressions for crowns/bridges/inlays/onlays and veneer preparations
Impressions for full or partial denture
Reline impressions
highly recommendedrecommended
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
tranMon
nsfer®nopren®
Precisionyl polyinV
impression materialysiloxane (VPS)
removable restora
transfer is an impression ma®Monopren
terial based on vinmaMedium viscosity
impres
tions and in implantologstora
terial with initial hydrophilicity tharansfer is an impression ma
Syringeable.yl polysiloxane.ed on vinelastomeric monophase impressionaddition-curing,,osity
ssion-taking
y:g
erial with initial hydrophilicity tha
ngeable.meric monophase impression
ty tha
Functional impressions
((simultaneous technique)
Monophase
One-step im
mpressions
q )us technique)mpression technique
tion with FutarcombinaProduces improved retention of the implant abutment when used in
.wD Slo®with Futarproved retention of the implant abutment when used innt abutment when used in
Implant imp
Reline impre
Impressions
and veneer preparaImpressions
highlrecom
ressions
essions
or full or partial dentures f
tionspreparaysys/onlaor crowns/bridges/inlas f
y recommendedmmended
vailaCurrent prices are a Not all products/packaable from our distributors. vailable in all markets.ges are aa
www.aurumgroup.com Toll Free: 1.800.661.9567308
Technical DataProduct name Mixing
ratioWorking time at
Intraoral settingtime at
Total setting Hardness(approx.)Shore
Linear dimen-sional change(max.) %
ElasticRecovery test (approx.) %
Strain in compression (approx.) %
Monopren® transfercartridge
1:1 2 minutes 2 minutes 4 minutes A 60 – 0.20 99.7 3.5
Monopren® transferfoil bag
1:5 2 minutes 2 minutes 4 minutes A 60 – 0.20 99.7 3.5
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio andtotal contentvolume per unit
Mixing technique Mixing element
Colour Odor/taste
Monopren® transfercartridge
Type 2, medium-bodied
351:1,50 ml cartridge
® 4 dispensing gun DS-50 1:1/2:1
Green mixing tip MB Blue Neutral
Monopren® transferfoil bag
Type 2, medium-bodied
355:1, 362 mlfoil bag
Plug & Press® dispenser or other automatic mixing and dispensing unit
Dynamicmixer
Blue Neutral
* Total setting time (removal from the mouth) from the start of mixing.
Precision impression material (vinyl polysiloxane)
The Monopren® transfer Advantages and BenefitsProduct Advantages
Short intraoral setting time (2 min.) with apractical total working time (2 min.)
Less distortion during the setting stage; user-friendly; more comfortable for the patient; less time required; greater precision.Good retention of the primary crowns; greater accuracy.
Easy removal from the patient’s mouth; tear resistant; less risk of fracture during model fabrication.
Good pressure build-up.
Flow properties to suit the indication
Two different forms of presentation Foil bags, cartridges, depending on amount of use.
Convenient Plug & Press® mixing unitSympress® system
Easy handling.
Monopren®
hardness for secure retention of implant abutments in edentulous jaws
Monopren® transfer: Also ideal for functional impressions
Monopren®
the double mix impression technique when used in combination with Panasil®
initial contact light
Monopren®
for secure retention of primary units when taking a pick-up impression
Fax: 1.800.361.5088 Email: [email protected] 309
Panasil® bineticsputtyfastHere used in combination with Panasil® initial contact x-light in the two-step impression technique
Extruding instead of kneadingKneadable, addition-curing, elastomeric precision impression material based on vinyl polysiloxane. Quick setting.
Clean, Reliable. Quick. Available in the convenient Plug & Press® mixing unitSympress® system. Panasil® binetics putty fast meets the usual standard of quality expected from Kettenbach. Panasil® binetics putty fast is also odorless and has a neutral taste.
Intro pack 362 ml REF 43.6951 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body
2 x 300 ml base, 2 x 62 ml catalyst
6 x 300 ml base, 6 x 62 ml catalyst
Precision impression material |
Two-step putty/wash technique
Impressions for crowns/bridges/inlays/onlays and veneer preparations
highly recommendedrecommended
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
anP ®nasil
fastputbin
tttyetics
Extruding instead of kneading
x-light in the two-step impression techniqueHere used in combina
fast
Precisionyl polyinV
o-step impression techniqueinitial contact®anasiltion with Pmbina
t
impression materialysiloxane (VPS)
and has a nequality expec
sy®SympressReliabClean,
yl polyson vinaKneadable,
utral taste.anasPcted from Kettenbach.
binetics put®anasilPystem.Available in the coQuick.le.
Quick setting.siloxane.elastomeric pddition-curing,
binetics putty fast is also®siltty fast meets the usual standard of
mix®onvenient Plug & Press
teriaprecision impression ma
o odorlessdard ofing unit
al based
and veneer preparaImpressions
wo-step puTTwo-step putty/wash technique
tionspreparaysys/onlaor crowns/bridges/inlas f
utty/wash technique
highlrecom
y recommendedmmended
www.aurumgroup.com Toll Free: 1.800.661.9567310
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.) %
Strain in compres-sion(approx.)%
Panasil® binetics putty fast 5:11 minute30 seconds
2 minutes 30 seconds
4 minutes A 63 – 0.20 99.5 2.5
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® binetics putty fast Type 0, putty 235:1, 362 mlfoil bag
Plug & Press®
dispenser or other automatic mixing and dispensing unit
Dynamic mixer Green
* Total setting time (removal from the mouth) from the start of mixing.
Precision impression material (vinyl polysiloxane)
The Panasil® binetics putty fast Advantages and BenefitsProduct Advantages
Mixes easily and hygienically at the press of a buttonExact dispensing Consistently good resultsReduced material use Only the amount of material required is dispensed
Ideal for the two-step impression technique with a total working time of 1 min. 30 sec. and an intraoral setting time of 2 min. 30 sec
Good elastic properties Easy removal from the patient’s mouthConvenient Plug & Press® mixing unit Sympress®
systemEasy handling
Fax: 1.800.361.5088 Email: [email protected] 311
Panasil® bineticsputtysoft
Extruding instead of kneadingKneadable, addition-curing, elastomeric precision impression material based on
® mixing unitSympress® ®
® binetics putty soft is also odorless
Intro pack 362 ml REF 43.6981 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body
2 x 300 ml base, 2 x 62 ml catalyst
6 x 300 ml base, 6 x 62 ml catalyst
® initial contact
Two-step putty/wash technique
One-step putty/wash technique
Impressions for crowns/bridges/inlays/onlays and veneer preparationsImpressions for forming functional peripheries
recommended
Vinyl polysiloxane (VPS) Precision impression material
anP ®nasil
sofputbin
fttty
netics
Extruding instead of kneading
sof
Precisionyl polyinV
ftinitial contact®
impression materialysiloxane (VPS)
®Sympress
aKneadable,
®
pelastomericddition-curing,
binetics putty soft is also®
mix®
teriaimpression maprecision
o odorless
ing unit
onbasedal
and veneer prepara
wo-step pu
One-step pu
Impressions
TTwo-step putty/wash technique
tions
utty/wash technique
utty/wash technique
preparaysys/onlaor crowns/bridges/inlas f
peripheries
and veneer preparaImpressions
recom
orming functional tions
or fs fprepara
mmended
www.aurumgroup.com Toll Free: 1.800.661.9567312
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.) Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion (approx.) %
® binetics putty soft 5:1 2 minutes 3 minutes 5 minutes A 56 – 0.20 99.5 3.5
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
® binetics putty soft Type 0, putty 23 5:1, 362 ml foil bag
®
automatic mixing and dispensing unit
Dynamic mixer Yellow-green
Precision impression material (vinyl polysiloxane)
The Panasil® binetics putty soft Advantages and BenefitsProduct Advantages
Accurate dispensing Consistently good resultsReduced material use
total working time of 2 min. and an intraoral setting time of 3 min.
Good elastic properties® mixing unit
Sympress® system
-
®
-® ® initial
-
J. Hey et al, University of Halle-Wittenberg, Germany, 2008
300
280
260
240
220
200
180
160
140
120
100 Aqua
sil
Expr
ess
Geni
eM
agic
man
ual
auto
mat
ic
Precision impression material (vin®
mpression material (vinyl polysiloxane)in
Reduced mte dAccura
anProduct Adv
anasilThe P
terial usemadispensing
ntages
binetics putty soft Adv®asil
total workin
Consistently
antages and Benefitsputty soft Adv
ng time of 2 min.
y good results
ntages and Benefitsnefits
Sympress®
Good elast
280
300
® systemmixing unit®
tic propertiesand an intratotal workin
aoral setting time of 3 min.ng time of 2 min.
140
160
180
200
220
240
260
®
®
initial®-
-
echnical DataTProduct name
100
120
140
Data
23° C/time at
orkingWratioMixing
settingotalTTotal
time atsettingIntraoral
35° C/time at
orkingW
University of Halle-Wittenberg,Hey et al,J.
testRecoElast
onal-dimensi
Linear
Shore(approx.)Hardness
2008,yGermanenberg,
-
sion -compres
Strain in yvero
tic
binetics putty®
Product name
binetics putty®
y soft 2 minutes5:1
23 C/
y soft 23
mm
puttyype 0TType 0,
(approx.)ConsistenISO 4823
5 minutes3 minutes
35° C/time at35 C/
Mixing tec
362 ml 5:1,
unitcontent volume per Mixing ratio and total ync
99.5%
– 0.20A 56
(apptest
(max.) %changeonalShore
Colou
welloYYelloDynamic mixer
®
Mixing elementchnique
3.5%(approx.) sion
prox.)
Odor/taste
w green
r
binetics puttyy soft 23puttyype 0,TType 0,
and dispensing unittiautomagfoil ba
welloYYelloDynamic mixer
ensing unitic mixing
w-green
Fax: 1.800.361.5088 Email: [email protected] 313
Panasil®
putty
Lasting successKneadable, addition-curing, elastomeric precision impression material based on vinyl polysiloxane.
Panasil®
guarantees maximum precision and optimal convenience thanks to an intraoral setting time of only 2 minutes.
® putty is ideal for use in combination with Panasil® contactplus x-light.
Normal pack 900 ml REF 43.5331 x 450 ml base, 1 x 450 ml catalyst, 2 measuring scoops
Economy pack 3600 ml REF 43.5384 x 450 ml base, 4 x 450 ml catalyst, 2 measuring scoops
Here used in combination with Panasil® contact plus x-light in the two-step impression technique
Precision impression material |
SUGGESTED IMPRESSION TECHNIQUE
Two-step putty/wash technique
One-step putty/wash technique
INDICATIONS
Impressions for crowns/bridges/inlays/onlays and veneer preparationsImpressions for forming functional peripheries
highly recommendedrecommended
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
puttanP
ty®nasil
Lastingg success
x-light in the twHere used in combina
Precisionyl polyinV
wo-step impression techniquecontact plus ®anasiltion with Pombina
impression materialysiloxane (VPS)
plus x-lightpu®
setting time oguarantees m
®anasilP
yl polysiloxvinaKneadable,
t.utty is ideal for use in combi
of only 2 minutes.maximum precision and optim
xane.elastomeric pddition-curing,
contact®anasiltion with Pna
mal convenience thanks to an intraoral
teriaprecision impression ma
t
an intraoral
al based on
TIO
and veneer prepara
One-step pu
Impressions
wo-step pu
DICAATIOIN
E
TTwo-step putty/wash technique
TESSUGG
NS
tions
utty/wash technique
preparaysys/onlaor crowns/bridges/inlas f
utty/wash technique
EIQUHNCETNIOPRESSIMDE
peripheries
and veneer preparaImpressions
highlrecom
orming functional tions
or fs fprepara
y recommendedmmended
www.aurumgroup.com Toll Free: 1.800.661.9567314
Precision impression material (vinyl polysiloxane)
The Panasil® putty Advantages and Benefits
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.) Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion (approx.) %
Panasil® putty 1:1 2 minutes N/a 2 minutes 4 minutes A 66 – 0.20 99.0 2.7
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® puttyType 0, Putty
241:1, 400/900 ml in jars
Manual, 1 measuring scoop (12.3 ml) per component (base and hardener)
Manual Yellow Neutral
* Total setting time (removal from the mouth) from the start of mixing.
Product Advantages
Short intraoral setting time of only 2 minutesGood elastic properties Easy removal from the patient’s mouthNon-sticky Easy handlingPliable consistency Good control of the wash material; easy to knead
anasilThe PPrecision impression material (vin
aputty Adv®asilmpression material (vin
antages and Benefitsyl polysiloxane)in
enefitsanasilThe P
Pliable conNon-sticky
ood elastGShort intra
anProduct Adv
aputty Adv®asil
ynsistencyic propertiesoral setting time of only 2 minutes
ntages
antages and Benefits
ood controGEasy handliEasy remov
minutes
enefits
terial; easyol of the wash mang
s mouthtient’val from the pa
y to knead
echnical DataTProduct name
Data
23° C/time at
orkingWratioMixing
settingotalTTotal
ti tsettingIntraoral
35° C/time at
orkingW
t tRecoElast
l-dimensi
Linear
Sh(approx.)Hardness
i-compres
Strain in yvero
tic
putty®anasilP
Product name
2 minutes1:1
23° C/
ype 0
mm
TType 0,
(approx.)ConsistenISO 4823
4 minutes2 minutesN/a
35° C/time at35° C/
scoop (12.3 ml) per
Mixing tec
1anual,M400/900 ml 1:1
unitcontent volume per Mixing ratio and total ync
%99.0– 0.2066A
(apptest
(max.) %changeonalShore
3 ml) per
Colou
measuring
Mixing elementchnique
%2.7
(approx.) sion
prox.)
Odor/taster
putty
otal setting time (removal from the mouth) from the start of mixing.TTotal setting time (removal from the mouth) from the start of mixing.*
®anasilP 24
al from the mouth) from the start of mixing.
Puttyype 0,TType 0,
hardener)component (base and scoop (12.3 ml) per
in jars400/900 ml 1:1,
welloYYelloanualMnt (base and .3 ml) per
Neutralw
Fax: 1.800.361.5088 Email: [email protected] 315
Panasil® puttyfast set
Here used in combination with Panasil® contact plus x-light in the two-step impression technique
Lasting successKneadable, addition-curing, elastomeric precision impression material based on vinyl polysiloxane. Quick setting.
Panasil®
material guarantees maximum precision and optimal convenience thanks to an intraoral setting time of only 2 minutes.
® putty fast set is ideal for use in combination with Panasil® contact plus x-light.
Normal pack 900 ml REF 43.5631 x 450 ml base, 1 x 450 ml catalyst, 2 measuring scoops
Economy pack 3600 ml REF 43.5644 x 450 ml base, 4 x 450 ml catalyst, 2 measuring scoops
Precision impression material |
SUGGESTED IMPRESSION TECHNIQUE
Two-step putty/wash technique
INDICATIONS
Impressions for crowns/bridges/inlays/onlays and veneer preparations
highly recommendedrecommended
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
anP ®nasilfasput
st settty
Lastingg success
x-light in the two-step impression techniqueHere used in combina
Precisionyl polyinV
o-step impression techniquecontact plus®anasiltion with Pmbina
impression materialysiloxane (VPS)
x-light.putty fast set is ideal for use in combina®
intraoral settiterial guarma
®anasilP
yl polysiloxvinaKneadable,
utty fast set is ideal for use in combina
ing time of only 2 minutes.rantees maximum precision
Quick setting.xane.elastomeric pddition-curing,
c®anasiltion with Pcombina
and optimal convenience th
teriaprecision impression ma
contact plus
hanks to an
al based on
TIO
and veneer preparaImpressions
wo-step pu
DICAATIOIN
E
TTwo-step putty/wash technique
TESSUGG
hi hl
NS
tionspreparaysys/onlaor crowns/bridges/inlas f
utty/wash technique
EUQIHNCETNIOPRESSIMDE
d dhighlrecom
y recommendedmmended
www.aurumgroup.com Toll Free: 1.800.661.9567316
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/95°
Total setting
Hardness(approx.) Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion (approx.) %
Panasil® putty fast set 1:11 minute30 seconds
N/a 2 minutes3 minutes30 seconds
A 66 – 0.20 99.0 2.7
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® putty fast setType 0, putty
241:1, 400/900 ml in jars
Manual, 1 measuring scoop (12.3 ml) per component (base and hardener
Manual Yellow ochre Neutral
Precision impression material (vinyl polysiloxane)
The Panasil® putty fast set Advantages and Benefits
* Total setting time (removal from the mouth) from the start of mixing.
Cut-back primary impression. All undercuts and in-terdental septa were fully removed, adequate escape channels were prepared to avoid the wash material displacing the primary impression material.
Syringing the prepared teeth with low viscosity Panasil®
into the infragingival region excellently, even with residual moisture. The tooth surfaces were immedia-tely and permanently wetted.
Completed two-step impression. The wash material
accurately reproduces the preparation details.
Product Advantages
Short intraoral setting time of only 2 minutes with a total working time of 1 minute 30 secondsGood elastic properties. Easy removal from the patient’s mouthNon-sticky Easy handlingPliable consistency Good control of the wash material; easy to knead
Fax: 1.800.361.5088 Email: [email protected] 317
Panasil® puttysoft
Lasting successKneadable, addition-curing, elastomeric precision impression material based
Panasil®
an intraoral setting time of only 2 minutes.
® ® initialcontact regular.
® initial contact
Precision impression material |
Two-step putty/wash technique
One-step putty/wash technique
Impressions for crowns/bridges/inlays/onlays and veneer preparationsImpressions for forming functionalperipheries
recommended
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
anP ®nasilsofput
fttty
Lastingg successPrecision
yl polyinV
initial contact®
impression materialysiloxane (VPS)
contact reg
®
an intraoral s
®anasilP
aKneadable,
.gular
setting time of only 2 minute
elastomeric pddition-curing,
init®
s.
teriaprecision impression ma
tial
al based
wo-step pu
and veneer preparaImpressions
One-step pu
TTwo-step putty/wash technique utty/wash technique
tionspreparaysys/onlaor crowns/bridges/inlas f
utty/wash technique
peripheriesImpressions
recom
orming functionalor fs f
mmended
www.aurumgroup.com Toll Free: 1.800.661.9567318
Technical Data
Product name Mixingratio
Working time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.) %
Strain in compres-sion(approx.)%
Panasil® putty soft 1:1 2 minutes N/a 2 minutes 2.7
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® putty softputty in jars component (base and
Yellow Neutral
Precision impression material (vinyl polysiloxane)
The Panasil® putty soft Advantages and BenefitsProduct Advantages
damaged residual dentition
Good elastic properties
Pliable consistency
Fax: 1.800.361.5088 Email: [email protected] 319
Panasil® tray fastheavy
Consistent positional stabilityHigh viscosity, addition-curing, elastomeric precision impression material based on vinyl polysiloxane. Quick setting.
A feature of Panasil® tray, the “heavy body” in the “fast” version, is its high positional stability. Quick-setting Panasil® tray fast heavy can also be used
this allows it to be easily trimmed.
Panasil® tray fast heavy can also be easily used in combination with Panasil® initial contact light in the double mix impression technique as well as with Panasil® initial contact x-light or Panasil® contact plus x-light in thetwo-step impression technique.
Panasil® tray fast heavy can be processed cleanly, reliably and quickly with the convenient Plug & Press® system.
Intro pack 362 ml REF 43.6841 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body
2 x 300 ml base, 2 x 62 ml catalyst
6 x 300 ml base, 6 x 62 ml catalyst
Here used in combination with Panasil® initial contact x-light in the two-step impression technique
Precision impression material |
SUGGESTED IMPRESSION TECHNIQUE
One-step impression technique (simultaneous technique)*
Two-step impression technique
INDICATIONS
Functional impressions
Impressions for crowns/bridges/inlays/onlays and veneer preparations for crowns/bridges/ inlays/onlays and veneer preparations
highly recommendedrecommended
*in combination with Panasil® light bodies
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
anP ®nasilheatray
vyay fast
Consisstent positionall stability
x-light in the two-step impression techniqueHere used in combina
Precisionyl polyinV
o-step impression techniqueinitial contact®anasiltion with Pmbina
impression materialysiloxane (VPS)
tray®anasilP
ws itthis allo
positional stature of PA fea
ybased on vinHigh viscosity
vy can also be easilfast hea
to be easily trimmed.
®anasilQuick-setting P.abilityvy bod“heathe,tray®anasilP
Quick settingyl polysiloxane.elastomeraddition-curing,,y
tion withly used in combina
vy can also betray fast hea®is itversion,“fast”in they”d
g.tric precision impression ma
e usedts high
terial
((simultaneous technique)*
O
Functional impressions
wo-step im
ITICAATIND
E
TTwo-step impression technique
One-step im
TESSUGG
q )us technique)*
S
mpressions
mpression technique
N
E
mpression technique
UIQNECHON TPRESSIMIDE
the convenientray®anasilP
two-step impanasas with Pinitia®anasilP
system.®nt Plug & Pressvy can be processefast hea
pression technique.initial contact x-light or®sil
al contact light in the double
reliably and quick,leanlyd c
contact plus x-light®anasilPe mix impression technique as well
ly with
t in theas well
ys and veneer preparays/onlainlaand veneer preparaImpressions f
highlrecom
tionss and veneer preparaor crowns/bridges/tions fprepara
ysys/onlaor crowns/bridges/inlaf
y recommendedmmended
www.aurumgroup.com Toll Free: 1.800.661.9567320
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.) %
Strain in compres-sion(approx.)%
Panasil® tray fast heavy1 minute20 seconds
N/a 2 minutes3 minutes20 seconds
A 62 – 0.20
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® tray fast heavyType 1, heavy-bodied
32foil bags
Plug & Press®
dispenser or other automatic mixing and dispensing unit
Dynamic mixer Orange Neutral
Precision impression material (vinyl polysiloxane)
The Panasil® tray fast heavy Advantages and Benefits
* Total setting time (removal from the mouth) from the start of mixing.
Product Advantages
User/patient-friendly setting characteristicstime of 1 min. 20 sec. and a short intraoral setting time of 2 min. in the two-step impression techniqueEasy trimming of the preliminary impression
High positional stability Quick pressure build-upGood elastic properties Easy removal from the patient’s mouthConvenient Plug & Press® mixing unitSympress® system
Easy handling
anasilThe PPrecision impression material (vin
ast heavy Advtray f®asilmpression material (vin
antages and Benefitsheavy Advyl polysiloxane)in
ges and Benefitsts
High positi
tienser/paU
anProduct Adv
anasilThe P
onal stability
nt-friendly setting characteri
ntages
ast heavy Advtray f®asil
Quick pressEasy trimmtime of 2 mtime of 1 m
istics
antages and Benefitsheavy Adv
sure build-upy impreing of the preliminar
in the two-step impression techniquemin.and a short intraoral setting 20 sec.min.
ges and Benefits
ssionon techniqueoral setting
ts
®SympressConvenient
ood elastGHigh positi
system®mixing unit®t Plug & Press
tic propertiesonal stability
Easy handliEasy removQuick press
ngs mouthtient’val from the pa
sure build up
echnical DataT
tray fast h
Product name
®anasilP
Data
vy20 seconds1 minute
hea
23° C/time at
orkingWratioMixing
20 second3 minutes
2 minutes/aN
settingotalTTotal
35° C/time atsettingIntraoral
35° C/time at
orkingW
%
– 0.20A 62ds
(apptestRecoElast
(max.) %changeonal
-dimensiLinear
Shore(approx.)Hardness
%(approx.)sion
-compresStrain in
prox.)
yverotic
tray fast h
Product name
otal setting time (removal from the mouth) from the start of mixing.TTotal setting time (removal from the mouth) from the start of mixing.*
®anasilP vy 32
mm
al from the mouth) from the start of mixing.
vy-bodiedheaype 1,TType 1,
hea
(approx.)ConsistenISO 4823 Mixing technique
and disptiautoma
dispenser or other Plug & P
gsfoil ba
unitcontent volume per Mixing ratio and total ync Colou
rangOynamic mixerD
ensing unitic mixinger or other
®ress
Mixing elementchnique
eutral
Odor/taste
Ne
r
Fax: 1.800.361.5088 Email: [email protected] 321
Panasil® tray softheavy
Precision impression material |
Consistent positional stabilityHigh viscosity, addition-curing, elastomeric precision impression material
A feature of Panasil® tray, the “heavy body” in the “soft” version, is its high positional stability. Panasil® tray soft heavy is ideal for use with the double
Panasil® tray soft heavy can be optimally combined with Panasil® initialcontact light and Panasil® initial contact regular.
Panasil® tray soft heavy can be processed cleanly, reliably and quickly with the convenient Plug & Press® mixing unit Sympress® system.
Intro pack 362 ml REF 43.6871 x 300 ml base, 1 x 62 ml catalyst, 10 dynamic mixers, 1 cartridge body
2 x 300 ml base, 2 x 62 ml catalyst
Economy pack 2172 ml REF 43.6896 x 300 ml base, 6 x 62 ml catalyst
Here used in combination with Panasil® initial contact light in the double mix impression technique
SUGGESTED IMPRESSION TECHNIQUE
One-step impression technique (simultaneous technique)*
Two-step impression technique
INDICATIONS
Functional impressions
Implant impressionsImpressions for crowns/bridges/inlays/onlays and veneer preparations
highly recommendedrecommended
*in combination with Panasil light bodies
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
anP ®nasilheatray
vyay soft
Consisstent positionall stability
light in the double mix impression techniqueHere used in combina
Precisionyl polyinV
ble mix impression techniqueinitial contact®anasiltion with Pmbina
impression materialysiloxane (VPS)
contact lighttray®anasilP
positional stature of PA fea
High viscosity
initial contact r®anasiland Pvy can be optimallysoft hea
vtray soft hea®anasilP.abilityvy bod“heathe,tray®anasilP
elastomeraddition-curing,,y
.regularinit®anasily combined with P
vy is ideal for use with the dis itversion,“soft”in they”d
tric precision impression ma
tial
oublets high
terial
((simultaneous technique)*
O
Functional impressions
wo-step im
ITICAATIND
E
TTwo-step impression technique
One-step im
TESSUGG
q )us technique)*
S
mpressions
mpression technique
N
E
mpression technique
QUINECHON TPRESSIMIDE
the convenientray®anasilP
mixing unit®nt Plug & Pressvy can be processesoft hea
system.®t Sympressreliably and quick,leanlyd c ly with
Implant im
and veneer preparaImpressions
highl
tion*in combinarecom
mpressions
tionspreparaysys/onlaor crowns/bridges/inlas f
y recommended
anasil light bodiesn with Pmmended
www.aurumgroup.com Toll Free: 1.800.661.9567322
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.) %
Strain in compres-sion(approx.)%
Panasil® tray soft heavy 5:1 2 minutes N/a 2 minutes 4 minutes A 55 – 0.20 99.7 3.0
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® tray soft heavyType 1, heavy-bodied
325:1, 362 ml foil bags
Plug & Press®
dispenser or other automatic mixing and dispensing unit
Dynamic mixer Orange Neutral
Precision impression material (vinyl polysiloxane)
The Panasil® tray soft heavy Advantages and Benefits
* Total setting time (removal from the mouth) from the start of mixing.
Product Advantages
User/patient-friendly setting characteristics Relaxed impression-taking thanks to a total working time of 2 min. and a short intraoral setting time of 2 min. in the double mix impression technique
High positional stability Quick pressure build-upGood elastic properties Easy removal from the patient’s mouthConvenient Plug & Press® mixing unitSympress® system
Easy handling
Photographs: With the kind permission of Dr. Ugo Torquati Gritti, Italy
Fax: 1.800.361.5088 Email: [email protected] 323
Panasil® initialcontactx-light
Precise Detail, Predictable Result –even in extreme situations.Addition-curing, elastomeric precision impression material based on vinyl polysiloxane with very high initial hydrophilicity.
Panasil® initial contact x-light is a very low viscosity impression material that can be ideally combined with the tray materials Panasil® binetics putty fast and theclassic Panasil® putty from the jar.
„Permanent hydrophilic
„
Normal pack 100 ml REF 43.7142 x 50 ml cartridge + 12 mixing tips
Economy pack 600 ml REF 43.71512 x 50 ml cartridge + 72 mixing tips
Here used in combination with Panasil® binetics putty fast in the two-step impression technique
Precision impression material |
Two-step putty/wash technique
One-step impression technique (simultaneous technique)
Impressions for crowns/bridges/inlays/ onlays and veneer preparationsFabricating full or partial denturesReline impressions
highly recommendedrecommended
Vinyl polysiloxane (VPS) Precision impression material
„
Precision terial |impression ma
anP ®nasil
x-liconinit
ightntacttial
iPrecise
iPredice Detail,
ictable Result –
putty fast in theHere used in combina
–
x li
Precisionyl polyinV
e two-step impression techniquebinetics ®anasiltion with Pombina
ight
n impression materialysiloxane (VPS)
anaslassic Pcbe ideally com
initia®anasilP
polysiloxaneAddition-curi
even in
.putty from the jar®silteriambined with the tray may loal contact x-light is a ver
y high initial hydropwith verelastomeric precision imng,
extreme situn
binetics putty fa®anasilals Ptew viscosity impression mao
.hilicityterial based onmpression ma
tions.a
ast and the t canerial tha
ylvin
Impressions f
(simultaneo
wo-step putty/wash technique
One-step im
TTwo-step putty/wash technique
ys/
ous technique)
or crowns/bridges/inlas f
utty/wash technique
mpression technique
P„„„„ „
ermanent hydrophilicP
ys and
Reline imprtingbricaFa
onla
highreco
tions
essionsfull or partial denturesveneer prepara
ly recommendedmmended
www.aurumgroup.com Toll Free: 1.800.661.9567324
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoralsettingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion (approx.) %
Panasil® initial contact x-light 1:11 minute30 seconds
1 minute2 minutes30 seconds
4 minutes A 46 – 0.20 99.3 3.5
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® initial contact x-lightlight-bodied
44 1:1, 50 ml cartridge® 4 dispensing
gun DS-50 1:1/2:1Yellow mixing tip
Violet Neutral
material‘s surface is observed and recorded.
Contact angles
how an impression material handels a moist tooth surface.
then the material has excellent hydrophilicity meaning it can overcome any residual moisture remaining on the tooth, even in extreme conditions.
Competitive A-silicone material Panasil® initial contact x-light
Precision impression material (vinyl polysiloxane)
The Panasil® initial contact x-light Advantages and BenefitsProduct Advantages
Exceptional initial hydrophilicityand directly contacts the moist tooth surface; the impres-sion reproduces the crisp detail of the preparation margin even with residual moisture present.
-king time
Guarantee of a precise impression even at the end of the total working time. Good results regardless of the time of the application stage.
initial hydrophilicity.
and does not drip from the tooth into the oral cavity.
User/patient-friendly setting characteristics Relaxed, careful impression-taking due to an adequately long total working time: more comfortable for the patient and greater satisfaction.
Less hydrophilicity Drop age 3 s Hydrophilicity
anasilThe PPrecision impression material (vin
initial contact x-light Adv®asilmpression material (vin
ntact x-light Advyl polysiloxane)in
antages and Benefitsdv Benefits
king time
Exceptional
anProduct Adv
anasilThe P
initial hydrophilicity
ntages
initial contact x-light Adv®asil
total workingGuarantee of-
even with ression reproducand directly c
ntact x-light Adv
Good results regardlessg timet tf a precise impression even a
sidual moisture present.ces the crisp detail of the prepacontacts the moist tooth surfac
antages and Benefitsdv
of the time of the end of the
tion marginara-ce; the impres
Benefits
tientUser/pa
king time
t-friendly setting characteristics
ter sand grealong total wo
careRelaxed,s
and does not drip from the tooth into the oral ca
initial hydrop
tiopplicathe atotal working
tisfaction.samore comfortable for the paorking time:
eful impression-taking due to an adequa
vdrip from the tooth into the oral caavity
.philicity
ge.on staGood results regardlessg time.
tient for the patelyan adequa
.vity
of the time of
Competitive A-
w an impression maho
Contact angles
silicone material
terial handels a moist tooth surface.ma
anasiP
urface.
initial contact x-light®il
echnical DataT
terial‘s surface is obserma
Data
ved and recorded.is obsereven in extreme conditions.overcome anthen the ma
extreme conditions.y residual moisture remaining on the tooth,me an
terial has excellent hydrophilicity meaning it cane maning on the tooth,city meaning it can
Product name
initial contact®anasilP
Product name
t x-light30 seconds1 minute
1:1
23° C/time at
orkingWratioMixing
(approx.)ConsistenISO 4823
4 minutes30 seconds2 minutes
1 minute
settingotalTTotal
35° C/time atsettingIntraoral
35° C/time at
orkingW
Mixing teccontent volume per Mixing ratio and total ync
99.3
%
– 0.20A 46
(apptestRecoElast
(max.) %changeonal
-dimensiLinear
Shore(approx.)Hardness
ColouMixing elementchnique
3.5
%(approx.) sion
-compresStrain in
prox.)
yverotic
Odor/taster
initial contact®anasilP
mm
t x-light 44light-bodied
(approx.)unit
gun DS-504®
50 ml cartridge1:1,
content volume per
Violetw mixing tipelloYYello
0 1:1/2:14 dispensing
Neutral
Fax: 1.800.361.5088 Email: [email protected] 325
Panasil® initialcontactlight
Precise Detail, Predictable Result –even in extreme situations.Addition-curing, elastomeric precision impression material based on vinyl poly-siloxane with very high initial hydrophilicity.
Panasil® initial contact light is a low viscosity impression material that can be ideally combined with the tray materials Panasil® tray soft heavy, Monopren®
transfer and the classic Panasil® putty soft from the jar.
Normal pack 100 ml REF 43.7172 x 50 ml cartridge + 12 mixing tips
Economy pack 600 ml REF 43.71812 x 50 ml cartridge + 72 mixing tips
Here used in combination with Panasil® putty soft in the sandwich impression technique
Precision impression material |
One-step impression technique (simultaneous technique)
One-step impression technique using a foil
Two-step putty/wash technique
Impressions for crowns/bridges/inlays/ onlays and veneer preparationsFabricating full or partial dentures Reline impressions
highly recommendedrecommended
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
anP ®nasil
lighconinit
htntacttial
iPrecise
iPredice Detail,
ictable Result –
the sandwich impression techniqueHere used in combina
–
ligh
Precisionyl polyinV
mpression techniqueputty soft in ®anasiltion with Pombina
ht
n impression materialysiloxane (VPS)
transfer and tideally combi
initia®anasilP
siloxane withAddition-curi
even in
putty so®anasillassic Pthe cterialsined with the tray maw viscoal contact light is a lo
y high initial hydrophilich verelastomeric precision imng,
extreme situn
.oft from the jarMo,vytray soft hea®anasilP
terial thaosity impression ma
.ityterial based onmpression ma
tions.a
®onoprent can bea
-yl polyvin(simultaneo
wo-step putty/wash technique TTwo-step putty/wash technique
One-step im
One-step imous technique)
utty/wash technique
oilmpression technique using a f
mpression technique
yys and
Reline imprtingbricaFa
onlaImpressions f
highreco
p p tions
essionsfull or partial denturesveneer prepara
ys/or crowns/bridges/inlas f
ly recommendedmmended
www.aurumgroup.com Toll Free: 1.800.661.9567326
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.) Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.)%
Strain in compres-sion(approx.)%
Panasil® initial contact light 1:11 minute30 seconds
1 minute2 minutes 30 seconds
4 minutes A 46 – 0.20 99.3 3.0
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® initial contact lightlight-bodied
41 1:1, 50 ml cartridge® 4 dispensing
gun DS-50 1:1/2:1Yellow mixing tip
Green Neutral
Precision impression material (vinyl polysiloxane)
The Panasil® initial contact light Advantages and BenefitsProduct Advantages
Exceptional initial hydrophilicityand directly contacts the moist tooth surface; the impres-sion reproduces the crisp detail of the preparation margin even with residual moisture present.
-king time
Guarantee of a precise impression even at the end of the total working time. Good results regardless of the time of the application stage.
initial hydrophilicity.
applied and does not drip from the tooth into the oral cavity.
User/patient-friendly setting characteristics Relaxed, careful impression-taking due to an adequately long total working time: more comfortable for the patient and greater satisfaction.
Contact angles
how an impression material handels a moist tooth surface.
then the material has excellent hydrophilicity meaning it can overcome any residual moisture remaining on the tooth, even in extreme conditions.
Competitive A-silicone material Panasil® initial contact light
Less hydrophilicity Drop age 3 s Hydrophilicity Drop age 3 s
anasilThe PPrecision impression material (vin
initial contact light Adv®asilmpression material (vin
antact light Advyl polysiloxane)in
antages and Benefitsenefits
king time
Exceptional
anProduct Adv
anasilThe P
initial hydrophilicity
ntages
initial contact light Adv®asil
total workingGuarantee of-
even with ression reproducand directly c
antact light Adv
Good results regardless of the time of g time.t tf a precise impression even a
sidual moisture present.ces the crisp detail of the prepacontacts the moist tooth surfac
antages and Benefits
of the time ofthe end of the
tion margin ara-ce; the impres
enefits
tientUser/pa
king time
t-friendly setting characteristics
ter sand grealong total wo
careRelaxed,s
pplied and does not drip from the tooth into the oral caa
initial hydrop
tiopplicathe atotal working
tisfaction.samore comfortable forking time:
eful impression-taking due to an adequa
does not drip from the tooth int
.philicity
ge.on staGood results regardless of the time of g time.
tientfor the patelyan adequa
.vityto the oral ca
of the time of
w an impression maho
Contact angles
Competitive A-s
terial handels a moist tooth surface.ma
silicone material
urface.
anasiP initial contact light®il
echnical DataT Dataeven in extreme conditions.overcome anthen the ma
extreme conditions.y residual moisture remaining on the tooth,me an
terial has excellent hydrophilicity meaning it canmaning on the tooth,city meaning it can
Product name
initial contact®anasilP
Product name
t light30 seconds1 minute
1:1
23° C/time at
orkingWratioMixing
(approx.)ConsistenISO 4823
4 minutes30 seconds2 minutes
1 minute
settingotalTTotal
35° C/time atsettingIntraoral
35° C/time at
orkingW
Mixing techniquecontent volume per Mixing ratio and total ync
99.3
%
– 0.20A 46
(apptestRecoElast
(max.) %changeonal
-dimensiLinear
Shore(approx.)Hardness
ColouMixing elementchnique
3.0
%(approx.)sion
-compresStrain in
prox.)
yverotic
Odor/taster
initial contact®anasilP
mm
t light 41light-bodied
(approx.)unit
gun DS-50 1:1/2:14®
50 ml cartridge1:1,
content volume per
Greenw mixing tipelloYYello
0 1:1/2:14 dispensing
Neutral
Fax: 1.800.361.5088 Email: [email protected] 327
Panasil® contactplusx-light
Impression taking without a speed limitAddition-curing, elastomeric precision impression material based on vinyl poly-siloxane with a very short intraoral setting time.
Panasil® contact plus x-light is a very low viscosity impression material that can be ideally combined with the tray materials Panasil® binetics putty fast and theclassic Panasil® putty/putty fast set from the jar.
Here used in combination with Panasil® putty fast set in the two-step impression technique
Precision impression material |
Two-step putty/wash technique
One-step impression technique (simultaneous technique)
Impressions for crowns/bridges/inlays/onlays and veneer preparationsFabricating full or partial dentures Reline impressions
highly recommendedrecommended
Vinyl polysiloxane (VPS) Precision impression material
Precision terial |impression ma
anP ®nasil
x-liplucon
ightusntact
Impresssion taking without a speed
x liset in the two-step impression techniqueHere used in combina
d limitPrecision
yl polyinV
ightstep impression technique
putty fast ®anasiltion with Pombina
n impression materialysiloxane (VPS)
anaslassic Pcbe ideally com
cont®anasilP
siloxane withAddition-curi
putty/putty fast set from®silteriambined with the tray ma
wy lotact plus x-light is a ver
y short intraoral settinh a verelastomeric precision imng,
.the jarbinetics putty fa®anasilals P
terw viscosity impression ma
g time.terial based onmpression ma
ast and the t canrial tha
-yl polyvin
Impressions f
(simultaneo
wo-step putty/wash technique
One-step im
TTwo-step putty/wash technique
ys
ous technique)
ys/onlaor crowns/bridges/inlas f
utty/wash technique
mpression technique
tingReline impr
and veneer preparabricaFa
highreco
full or partial denturesessions
tionsprepara
ly recommendedmmended
www.aurumgroup.com Toll Free: 1.800.661.9567328
Technical DataProduct name Mixing
ratioWorking time at23° C/
Working time at35° C/
Intraoral settingtime at35° C/
Total setting
Hardness(approx.)Shore
Lineardimensi-onalchange(max.) %
ElasticRecovery test(approx.) %
Strain in compres-sion(approx.)%
Panasil® contact plus x-light 1:1 1 minute
Product name ISO 4823 Consistency (approx.)mm
Mixing ratio and total content volume per unit
Mixing technique Mixing element Colour Odor/taste
Panasil® contact plus x-lightlight-bodied
® Yellow mixing tip Violet Neutral
Precision impression material (vinyl polysiloxane)
The Panasil® contact plus x-light Advantages and Benefits
Product Advantages
setting characteristics,Very time-saving with small prosthetic restorations, greater tolerance with complex restorations; increa-sed patient comfort.
Very low viscosity -gival areas; highly crisp reproduction of detail.
High thixotropyImproved hydrophilicity properties Accurate reproduction of subgingival preparation mar-
gins due to increased tolerance to residual moisture.
Positional stability: Panasil® contact plus x-light remains where it is applied due to its
-pic behavior, however, ensures good flowability when pressure is applied.
Rheology (the study of flow): Rheological mea-surements can be used to plot the chronologi-cal progress from the plastic phase to the ela-
the short curing phase, as occurs with Panasil®
0 80 160 240 320 400
140000000,0
100000000,0
60000000,0
20000000,0
0Time after start of mixing (sec.)
Viscosity (mpas)
Fax: 1.800.361.5088 Email: [email protected] 329
Bite registration
Bite registration material |
www.dentaladvisor.com
Editors’ Choice+ + + + 1/2
Dental Advisor, Vol. 25, No. 9, Nov. 2008
Futar® market leader for over 10 yearsFutar®, Futar® D and Futar® D Fast – have been Num-ber 1 for bite registration in Germany for more than 10 years1).An exceptional performance, which impressively underlines the outstan-ding quality of Futar®, Futar® D and Futar® D Fast. Clear focusing on user
quality over many years as well as continuous development and integration of inno-
vations: features that produce a market leader. And this will also continue into the future.
1) Source: GfK (German Society for Consumer Research)
Futar.®
years market leader
Futar® – also test leader in the USAIn a comparative test involving 19 bite registration materials carried out by the American dental publication Reality, Futar®
was chosen as the test winner with 4.5 from a possible 5 points. Reality provides dentists and dental technicians with independent
Reality carries out comparison consumer test reports, objective
of the product such as fracture resistance, wettability, handling, consistency, adequate working time etc. are investigated.
Technical DataProduct name Working time at Intraoral
setting time at Total setting Hardness
(approx.)Shore
Lineardimensionalchange(max.) %
Elastic Recovery test (approx.) %
Strain incompression (approx.) %
Futar® 30 seconds 1 minute30 seconds 2 minutes A 90/HD 58 - 0,20 %
® 4dispensing gun DS-50 1:1/2:1
Green mixing tip MB Ø 6.5 mm
Futar® D 30 seconds 1 minute30 seconds 2 minutes D 43/HD 76 - 0,10 %
® 4dispensing gun DS-50 1:1/2:1
Green mixing tip MB Ø 6.5 mm
Futar® D Fast 15 seconds 45 seconds 1 minute D 43/HD 76 - 0,10 %® 4
dispensing gun DS-50 1:1/2:1
Green mixing tip MB Ø 6.5 mm
Futar® D Slow 1 minute30 seconds 3 minutes 4 minutes
30 seconds D 43/HD 76 - 0,10 %® 4
dispensing gun DS-50 1:1/2:1
Green mixing tip MB Ø 6.5 mm
Futar® Scan 15 seconds 45 seconds 1 minute D 35/HD 60 - 0,20 %® 4
dispensing gun DS-50 1:1/2:1
Yellow mixing tip MB Ø 4.2 mm
* Total setting time (removal time from the mouth) from the start of mixing.
Bite r terial |tion maregistra
Bite registrationregistra ion
v
,®ratuf Fy otilaug qdinrofrel panoitpecxn eAsgiee rtir bo1 freb
D®ratu, F®artuF
rkam®ratFu
ma
F
g
kre a macudort pahs terutae: fsnoitargetd innt anepmoleves duouintnocaey ynr maey ovtilauq
cor fael. CtsaD F®ratud FnD a®ratu, Feinlredny ulevisserpmh icih, wecnmaahteror moy fnmareGn in oitarts
evat – hsaD F®ratud Fna
0 yer 1vr ooer fdaet lek
arket leader
dn. Aredaet le-onf inn ooitasl ales ws ara
resn ug oinsuc-natstue ohs t.1)sraey0n 1-mun Neeb
sraey
ut scudore phf to
uoseirray ctilaeR
dsdeivoprytialeRhs tn aesohs cawhy tt bud oeirracevitarapmon a cI
– a®ratFu
,ytilibatte, wecnatsisee rrutcars fh ac
,stropertser temusnon cosirapmoctu
dnihtiwsniacinhcetlatndednastistndeelibssom a por5 f.h 4tir wenint wsee thtilaen Roitacilbul patnen dacireme Ah
noitartsgiee rti9 bg 1invlvot insee t
he Un ter idaet lesso tla
,gindlnah
evitcejbo
tndenepde.stinoe 5 p
®ratu, Fytslairetma
ASe U
ce: GfK (German Society for Consumer Resear1) Sour
llis wiht
echnical DataT
®F
WProduct name
ch)for Consumer Resear
.erutue fho tte inuintnoo csla
. 2008No. 9, Nov,Dental Advisor
Data
1 minuted
setting time atIntraoralorking time atW
.com.dentaladvisorwww
/ee08
ol. 25,V/2+ + + + /1
es’ ChoicEEEditorrs’ Choic
ed, aycnetsisnoc
A /HD
Shore
i
(approx.)Hardnessotal settingTTotal setting
agitseve inr. acte emig tinkre wotauq
di i
(approx.) %
4®
y testverRecoElastic
(max.) %changedimensionalLinear
.deta
Green mixing tip
(approx.) %compression Strain in
3
1
1wD Slo®Futar
3
astD F®Futar
3
D®Futar
®Futar
3 minutes
45 seconds
30 secondsminute
30 seconds
5 seconds
30 seconds
1 minute30 seconds
1 minute30 seconds
D 43/HD 76
D 43/HD 76
30 seconds4 minutes
D 43/HD 76
1 minute
A 90/HD 58
2 minutes
2 minutes
DS-50 1:1/2:1
DS-50 1:1/2:1
dispensing gun 4®
- 0,10 %
DS-50 1:1/2:1
dispensing gun 4®
- 0,10 %
DS-50 1:1/2:1
dispensing gun 4®
- 0,10 %
dispensing gun - 0,20 %
MB Ø 6.5 mm
MB Ø 6.5 mm
Green mixing tip
MB Ø 6.5 mm
Green mixing tip
MB Ø 6.5 mm
Green mixing tip
Green mixing tip
1
otal setting time (removal time from the mouth) from the start of mixing.T*
Scan®Futar 45 seconds
al time from the mouth) from the start of mixing.
5 seconds D 35/HD 60
.
1 minuteDS-50 1:1/2:1dispensing gun
4®
- 0,20 % MB Ø 4.2 mmw mixing tipelloYYello
www.aurumgroup.com Toll Free: 1.800.661.9567330
Futar®
Intro
pack
Laboratory products |
Futar® – the comfortable classicQuick-setting, addition-curing bite registration material based on vinyl polysiloxane (A-silicone) with high final hardness (Shore-A-hardness 90).
Futar® is a syringeable elastomeric bite registration material for accurate reproduction of the occlusal relationship with high final hardness for precise results and maximum convenience. Futar® can be easily trimmed with a rotary instrument or cut with a scalpel and is impressive because of its easy handling.
2 x 50 ml cartridge + 12 mixing tips
Vinyl polysiloxane (VPS) Bite registration material
Occlusal
Full arch Bite registration Quadrant Bite registration
highly recommendedrecommended
Bite registration material (vinyl polysiloxane)The Futar® Advantages and BenefitsProduct Advantages
checked intraorally, as excess segments can be broken off
Low elasticity No elastic rebound when articulating the two models
short intraoral setting time for the patient
Precise results, maximum convenience Ensures easy handling and maximum precision
Technical DataProduct name Working time at Intraoral setting
time atTotal setting Hardness
(approx.)Shore
Linear dimen-sional change(max.) %
Mixing technique Mixing element
Futar® 1 minute2 minutes
A 90/- 0.20
® 4dispensing gun
GreenMixing tip
*) Total setting time (removal time from the mouth) from the start of mixing.
F
y prodtorLabora
®
ducts |
Futar®tar
) wenocilsiA(ngittes-kciuQ
®FutarAerohSs (sendrnal haih fgih htiwoitartisege rting biruc-noitidd, ag
– the comfor®
)0s 9sendrhaAsylol pynin vd oesaial bertan mo
lassicrtable cBite re
yl pinV
enaxolsigistration material
polysiloxane (VPS)
stf ie osuaceben bac®artuFtlaeal rsulcco
is a sy®artuF
) wenocilsi-A(
.ngildnsy haas eny iratoh a rtid wemmiry tlsiae essendrnal haih fgih htip wihsnoit
isege rtic biermotslae elbangeiry
A-erohSs (sendrnal haih fgih htiw
lepalch a stit wur ct onemurtsnmixad mns atlusee riscer pros fee rtaruccr aoial fertan moitarts
.)0s 9sendrha-A
evsiseprmd is ina.eceninevnom cumehf tn ooitcudoepr
Full archQuadran
Occlusa
hr
tiontionistrant Bite reg
istrah Bite reg
al
highly recommendedrecommended
The FutarBite registration material (vin
anProduct Adv
antages and BenefitsAdv®utarstration material (vin
ntages
ges and Benefitsyl polysiloxane)
as exces,checked intraorally
ts
ss segments can be broke
Precise re
echnical DataT
short intra
w elastiLo
Product name
maximum convenience
cal Datasults,
aoral setting time
icity
metime atIntraororking time atW
Ensures easy handling and maximum precision
tientfor the pa
No elastic rebound when art
Shore(approHardneotal setting TTotal setting
tral setting
maximum precision
ting the two modelsticula
Mixing technique
(max.) %sional change
-Linear dimenox.)ess Mixing elementique
®
otal setting time (removal time from the mouth) from the start of mixing.TTotal setting time (removal time from the mouth) from the start of mixing.)*
Futar
(removal time from the mouth) from the start of mixing.
1 minu
f mixing.
A 90/2 minutes
ute
( )
gdispensing 4®
- 0.20 Mixing tip Green
gun
Fax: 1.800.361.5088 Email: [email protected] 331
Futar® D
Intro
pack
Futar® D – hard can be so convenient.Quick-setting, addition-curing bite registration material based on vinyl polysiloxane (A-silicone)
Futar® D is a syringeable elastomeric bite registration material for accurate reproduction of the occlusal relationship and ensuring precise results and maximum convenience. Futar® D can be
hardness and easy handling.
Bite registration material |
Vinyl polysiloxane (VPS) Bite registration material
Occlusal
Full arch Bite registration Quadrant Bite registration
highly recommendedrecommended
Bite registration material (vinyl polysiloxane)
The Futar® D Advantages and BenefitsProduct Advantages
be checked intraorally, as excess segments can be broken off
Low elasticity No elastic rebound when articulating the two models
time more comfortable for the patient
Technical DataProduct name Working time at Intraoral setting
time atTotal setting Hardness
(approx.)Shore
Linear dimen-sional change(max.) %
Mixing technique Mixing element
Futar® D1 minute
2 minutes®
*)
Bite r terial |tion maregistra
Futa ®ar D
aQuick setting
®Futartion maaddition curing bite registra
D – hard canyl polysiloxane (A-silicone) terial based on vina
be so conveniBite regis
yl polyinV
e (A silicone)
ient.stration materialysiloxane (VPS)
hardness and ea
tionlusal relaoccD is a sy®Futar
aQuick-setting,
asy handling.
nship and ensuring precise results and maximum convenience.yringeable elastomeric bite registra
tion maaddition-curing bite registra
Futas and maximum convenience.te reprodterial for accuration maa
yl polysiloxane (A-silicone) terial based on vina
D can be®aruction of the
e (A-silicone)
Full arch BitQuadrant Bite reg
Occlusal
highreco
tiontionistraite reg
istrate reg
ly recommendedmmended
antProduct Adv
The FutarBite registration material (vin
tages
antages and BenefitsD Adv®tarytration material (vin
ges and Benefitsyl polysiloxane)
its
recommended
echnical DataT
time
w elasticiLo
Product nameal Data
ity
g
e Intraoraorking time atW
more comfor
No elastic re
be checked i
Hardnessotal setting TTotal setting al setting
tientrtable for the pa
ting the two modbound when articula
as excess segments can be broken off,intraorally
Mixing technique-Linear dimen
dels
e broken off
Mixing elementProduct name
D)*
®Futar
e
1 minut
time atIntraoraorking time atW
Shore
2 minuteste
(approx.)Hardnessotal setting TTotal setting al setting Mixing technique
®(max.) %sional changeLinear dimen Mixing element
www.aurumgroup.com Toll Free: 1.800.661.9567332
Intro
pack
Laboratory products |
Futar® D Fast – not only fast, but double fast.Extra quick-setting, addition-curing bite registration material based on vinyl polysiloxane
Futar® D Fast is a syringeable elastomeric bite registration material for accurate reproduction of the occlusal relationship and ensuring precise results and maximum convenience. Futar® DFast can be easily trimmed with a rotary instrument and is impressive because of its extra quick
Futar®
D Fast
Vinyl polysiloxane (VPS) Bite registration material
Occlusal
Full arch Bite registration Quadrant Bite registration
highly recommendedrecommended
Bite registration material (vinyl polysiloxane)The Futar® D Fast Advantages and BenefitsProduct Advantages
be checked intraorally, as excess segments can be broken off
Low elasticity No elastic rebound when articulating the two models
setting time more comfortable for the patient
Ensures easy handling and maximum precision
Technical DataProduct name Working time at Intraoral setting
time atTotal setting Hardness
(approx.)Shore
Linear dimen-sional change(max.) %
Mixing technique Mixing element
Futar® D Fast®
*)
y prodtorLabora
F
ducts |
®
D FFut
astF®tar
Extra quick-s
®artFuaddition-curing bite registsetting,
t oot – nsaD F®
yl polterial based on vintion matra
uot du, btsay flnoBite re
yl pinV
lysiloxane
.tsae flbugistration material
polysiloxane (VPS)
ast can be eFlusof the occasD F®Futar
y instrueasily trimmed with a rotartionship and ensuring precsal rela
st is a syringeable elastomeric bite
ument and is impressive because of its extra quick ise results and maximum convenience.
teterial for accuration mae registra
of its extra quickD®Futarience.
e reproduction
Full archQuadran
Occlusa
hr
tiontionistrant Bite reg
al
istrah Bite reg
highly recommendedrecommended
Product Adv
The FutarBite registration material (vin
antagesv
ast AdvD F®utaristration material (vin
antages and Benefitsdvyl polysiloxane)n
Benefits
echnical DataT
setting t
w elasLo
Product namecal Data
time
sticity
ametimeIntraoorking time atW
Ensures easy handling and maximum precision
more com
No elastic
be check
(approx )Hardnessotal setting TTotal setting
atoral setting
easy handling and maximum precision
tientmfortable for the pa
ting the two mc rebound when articula
as excess segments ca,ked intraorally
Mixing techniquesional change
-Linear dimen
n
models
an be broken off
Mixing element
as
)*
D F®Futar st
timeShore(approx.)at
(max.) %®
sional change
Fax: 1.800.361.5088 Email: [email protected] 333
Futar® Scan
Laboratory products |
Futar® Scan – the state-of-the-art material for optical data recording.Scannable, addition-curing bite registration material based on vinyl polysiloxane. Extra hard, extra quick setting.
Perfect, accurate image reproduction is indispensible when using modern CAD/CAM systems in the ® Scan stands out from other products because of its high-quality
scan results, which are even attained without the use of powder! The outstanding optical properties (optimum dynamic value!) guarantee high recording quality and optimal image reproduction.
Normal pack 100 ml REF 43.795 2 x 50 ml cartridge + 12 mixing tips
Economy pack 300 ml REF 43.797 6 x 50 ml cartridge + 36 mixing tips
Vinyl polysiloxane (VPS) Bite registration material
Occlusal
Full arch Bite registration Quadrant Bite registrationScanable Bite registration
highly recommendedrecommended
Bite registration material (vinyl polysiloxane)
The Futar® Scan Advantages and BenefitsProduct Advantages
For optical and laser systemsavailable CAD/CAM systems
Extra hard (Shore-D 35) and extra quick (working time: 15 sec.;intraoral setting time: 45 sec.).
Very easy to cut with a scalpel Easy handling, also intraorally
Dispensed using small, short mixing tips Minimal material use
Can also be used for standard bite registration!
Technical DataProduct name Working time at Intraoral setting
time atTotal setting Hardness
(approx.)Shore
Linear dimensional change
(max.) %
Mixing technique Mixing element
Futar® Scan 15 seconds 45 seconds 1 minuteD 35/
- 0.20® 4 dispensing
gun DS-50 1:1/2:1Yellow mixing tip MB Ø 4.2 mm
*) Total setting time (removal time from the mouth) from the start of mixing.
L y products | torLabora
Futa Scan®ar n
terima®Futar
optical dal forScan – the st
ta recordingdate-of-the-arta
Bite regisyl polyinV
stration materialysiloxane (VPS)
(optimum dwhich are even ascan results,
te imaaccuraerfect,P
extra quick settaddiScannable,
terima
ttained without the use of pohich are even aScan stands out from other products because of its high-quality®
ge reproduction is indispensible when using modern CAD/CAM systems in thee ima
ing.tetion maition-curing bite registra
optical dal for
ge reproduction.The outstanding optical propertieswder! use of po
ut from other products because of its high-qualityble when using modern CAD/CAM systems in the
Eyl polysiloxane.rial based on vin
ta recording.da
duction.ptical propertiesits high-qualitysystems in the
Extra hard,
.Occlusal
Quadrant Bite regble BScana
Full arch Bittiontionistraite reg
istraite regtionistrate reg
antProduct AdvThe FutarBite registration material (vin
tagesaScan Adv®tarytration material (vin
antages and Benefitsyl polysiloxane)
high
nefits
recoly recommendedmmended
echnical DataTCan also be
Dispensed u
y easy toerV
intraoral setExtra hard (
or optical aF
Product nameal Data
tion!e used for standard bite registra
short mixing tipsusing small,
o cut with a scalpel
45 sec.).tting time:(Shore-D 35) and extra quick (working
and laser systems
e Intraoral settinorking time atW
Minima
Easy h
15 sec.;g time:
vailaba
LinearHardnessotal setting TTotal setting ng
terial useal ma
also intraorallyhandling,
ble CAD/CAM systems
MMixing techniquedimen Mixing element
Scan
Product name
otal setting time (removal time from the mouth) from the start of mixing.TTotal setting time (removal time from the mouth) from the start of mixing.)*
®Futar
e
45 seconds
emoval time from the mouth) from the start of mixing.
15 seconds
time atIntraoral settinorking time atW
- 0.20
(max.)
mixing.
D 35/1 minute
sionalLinear
Shore(approx.)Hardnessotal setting TTotal setting ng M
MY
gun DS-50 1:1/2:14 dispensing ®
0
Mixing technique
%changedimen Mixing element
MB Ø 4.2 mmw mixing tipelloYYello
www.aurumgroup.com Toll Free: 1.800.661.9567334
Intro
pack
Futar®
D Slow
Futar® D Slow – take all the time you need.Addition-curing bite registration material based on vinyl polysiloxane (A-silicone) with an
Futar® D Slow is a syringeable elastomeric bite registration material for accurate reproduction of the occlusal relationship and ensuring precise results and maximum convenience. Futar®
D Slow can be easily trimmed with a rotary instrument and is impressive because of its extra
A-silicone is required
Bite registration material |
Vinyl polysiloxane (VPS) Bite registration material
Occlusal
Full arch Bite registration Myocentric Bite registration Impressions for forming hard functional peripheries
highly recommendedrecommended
Bite registration material (vinyl polysiloxane)The Futar® D Slow Advantages and BenefitsProduct Advantages
intraorally, as excess segments can be broken off
Low elasticity No elastic rebound when articulating the two models
Individual application
as a separating agent for investing acrylic and porcelain teeth etc.)
Technical DataProduct name Working time at Intraoral setting
time atTotal setting Hardness
(approx.)Shore
Linear dimen-sional change(max.) %
Mixing technique Mixing element
Futar® D Slow1 minute ®
*)
F
tionBite registra
®
terial |n ma
D SFut
wSlo®tar
ruc-noitiddA
®artuFesaial bertan moitartisege rting bir
ekaw – tolD S®
nocilsi-Ae (naxolsiylol pynin vd oe
uoe ymie thl tle aBite re
yl pinV
nh ati) we
.deeu ngistration material
polysiloxane (VPS)
enocilsi-A
n baw colD Ssulcce ohf toolD S®artuF
deriuqeis r
ny iratoh a rtid wemmiry tlsiae ebceng prirusd ennp aihsnoitlaeal rstic biermotslae elbangeirw is a syo
uacee bvsiseprmd is int aenmurtsenvnom cumixad mns atlusee ris
aruccr aoial fertan moitartisege rt
artxs etf ie osu
®ratu. Feceninoitcudoepre rta
p p
Occlusa
Full arch
peripherImpressMyocent
h
al
tion
riesorming hard functional or fions f
tionistratric Bite registrah Bite reg
highly recommended
Product Adv
The FutarBite registration material (vin
antagesv
D Slow Adv®utaristration material (vin
antages and BenefitsAdvyl polysiloxane)n
d Benefits
rrecommended
echnical DataT
Individua
w elasLo
Product namecal Data
tionpplicaal a
sticity
ametime atIntraoral seorking time atW
genting aas a separa
No elastic rebound w
as excess,intraorally
sionLine
(approx )Hardnessotal settingTTotal setting etting
ylic and porcelain tnt for investing acr
ting the two modelswhen articula
s segments can be broken off
Mixing techniqueal change
-ar dimen
teeth etc.)
Mixing element
D Slo
)*
®Futar w1 minute
o
time at(maxsion
Shore(approx.)
x.) %®
al change
Fax: 1.800.361.5088 Email: [email protected] 335
Laboratory products |
Basic set REF 43.75050 ml Mucopren soft, 50 ml Mucopren sealing silicone, 10 ml Mucopren adhesive,7 mixing tips (Ø 6.5 mm), 20 mixing tips (Ø 3.2 mm), 1 brush holder, 20 single-use brushes, 1 steel cutter, accessories
Normal pack Mucopren® soft 100 ml REF 43.7512 x 50 ml Mucopren soft, 12 mixing tips (Ø 6.5 mm)
Mucopren® Adhesive 10 ml REF 43.752
Normal pack Mucopren® sealing silicone 50 ml REF 43.7531 x 50 ml Mucopren sealing silicone, 10 mixing tips (Ø 3.2 mm)
Vinyl polysiloxane (VPS) Soft linerBonds to the denture.And lives up to its promise.Permanently soft reline material based on vinyl polysiloxane for direct and indirect application.
® soft
Direct
Indirect
For permanently soft liningsFor compensating for areas of mucous with varying degrees of resiliencyFor relieving sharp bony ridges
For relieving the operation site after placing implants
For relining temporary restorationsFor conditioning the mucous membranes in cases with denture soresFor fabricating and relining obturators
highly recommendedrecommended
Dentures have to be relined over the course of time due to changes in the alveolar bone tissue, mucosa or because of dental surgery. We supply Mucopren® soft, a permanently soft denture reline material based on A-silicone that lives up to its promise: easy to trim and guarantees a durable bond to the denture base. Simply intelligent.
Mucopren® softPermanently soft denture reline material based on A-silicone.
L y products | torLabora
And liBonds
es p to its prto the denture
romisee. yl polyinV ysiloxane (VPS) Soft liner
tion.pplicaaermanently soft reline maP
And livyterial based on vinoft reline ma
ves up to its pryl polysiloxane for direct and indirect
romise.direct
For permanentl
y g gying degvarFor compensa
Indirect
Direct
y soft linings
grees of resiliencygor areas of mucous with ting fnsa
entl
s®enMucopr
durable bond to the denturon A-silicone that lives up to its prsupply Mucoprin the alveolar bone tissue, mucosa or because of dental sur
es have to be rDentur
soft
e base. Simply intelligent.d to the denturomise: easy to trim and guarantees ae that lives up to its pr
soft, a permanently soft dentur®enoprar bone tissue, mucosa or because of dental sur
elined over the course of time due to changesve to be r
ly intelligent.e: easy to trim and guarantees a
eline material basede rsoft dentur. Wgeryecause of dental sur
urse of time due to changes
cases with denture sorestbricaFor fa
For relining temporarFor conditioning the mucous membranes in
implantsFor relieving the opera
For relieving sharp bon
high
es abased
eWs
reco
torsdenture soresting and relining obtura
tionsoning the mucous membranes in
y restoratemporar
tion site after placing g the opera
y ridgesg sharp bon
ly recommendedmmended
Permanently soft dentursenMucopr
eline material based on A-silicone.e rsoft dentursoft
based on A-silicone.
www.aurumgroup.com Toll Free: 1.800.661.9567336
Soft liner (vinyl polysiloxane)® soft Advantages and Benefits
® adhesive guaranteesexcellent bonding to acrylic dentures, prevents loo-sening from the denture and gap formation between the denture acrylic and silicone liner.
Mucopren® silicone sealer in the cartridge produces an ex-cellent bond with the silicone liner, ensures easy handling and creates a smooth, shiny surface at the silicone/acrylic interface.
-rantees hygienic denture conditions and a long-term period in situ.
(e.g. tear resistance, elongation) ensure easy handling with a high loading capacity.
Permanent elasticity ensures high intraoral comfort and relieves critical areas of the oral mucosa.
-quate total working time.
Easy to trim
Indirect relining
Easily sealed
Direct relining
ISO 10139-2:2009-08 Mixing ratio and Mixing Odor/taste
Mucopren® soft1:1, 50 mlcartridge
® 4 dispensing gun mixing tip MBØ 6.5 mm
Light pink Neutral
Mixingratio
Working
23° C/
Working
35° C/
Intraoralsetting
35° C/
Total setting
Hardness
Shore
Linear-
test
Strain in
sion
Mucopren® soft1:1
2 minutes15 seconds
N/a3 minutes 15 seconds
5 minutes 30 seconds
28 – 0.20 99.5 2.5
Mucopren® soft1:1
2 minutes15 seconds
N/a N/a> 30 minutesin pressure vessel
28 – 0.20 99.5 2.5
Soft liner (vin
soft Adv®yl polysiloxane)in
antages and Benefitsv Benefits
the denturesening fromexcellent bo
.ylic and silicone lineracrtionp formathe denture and ga
prevylic dentures,onding to acradhesive guaran®
soft Adv®
tear res(e.g.-
interface.tes aand crea
cellent bonds®Mucopren
n between-vents loo
tees
antages and Benefitsv
tion) ensure easy handling with elongaistance,
t they surface ashina smooth,ensures,with the silicone liner
silicone sealer in the cartridge p
Benefits
sy handling with
ylic silicone/acrs easy handling
-produces an ex
and relievesermanent eP
period in siturantees hyg
s critical areas of the oral mucoelasticity ensures high intraoral comfort
u.ienic denture conditions and a long-term
te total wquaosa.l comfort
a high loadin( g
long-term
working time.
.pacityg ca)g
-
y g
23° C/
orkingWratioMixing
settingotalTTotal
35° C/
settingIntraoral
35° C/
orkingW
test-
Linear
Shore
Hardness
sion
Strain in
soft®Mucopren
soft®Mucopren
ISO 10139-2:2009-08
15 seconds
15 seconds
2 minutes1:1
2 minutes1:1
Mixing ratio and
vessel
30 seconds
in pressure minu30>
N/aN/a
5 minutes15 seconds3 minutes
N/a
35° C/
Mixing
99.5
99.5
– 0.2028eutes
– 0.2028ds
Odor/taste
2.5
2.5
soft®Mucopren4 dispen®
cartridge50 ml1:1,
Light pØ 6.5 mmmixing tip MB
sing gunNeutralpink
Fax: 1.800.361.5088 Email: [email protected] 337
Mixing and dispensing unitsPractical electric mixing and dispensing units ensure a high degree of user-friendly handling and
order to eliminate possible sources of error. The Plug & Press® Dispenser 5:1 from Kettenbach provides the ideal requirements for standardization.
Plug & Press® mixing unit Sympress®
The Plug & Press® mixing unit Sympress® is clean, reliable, quick and very easy to use.
® 4 dispensing gun Manual dispensing for cartridge materials in 1:1 and 2:1 mixing ratios.
Mixing and dispensing units |
® 4 1 piece REF 43.587
Sympress® 1 piece REF 43.701 Cartridge body 1 piece REF 43.702 Dynamic mixer 50 pieces REF 43.705
Current prices are available from our distributors. Not all products/packages are available in all markets.
Mixing aand dispensing units |
Mixing and dispensing unitsng and dispensing unitsispensing unitsg units
4 dispensing gun®
mixing unit Sympr®essThe Plug & Prmixing unit Sy®essPlug & Pr
ements for standarequirovides the ideal rprder to eliminate possible souror
Practical electric mixing and dispensing units ensur
g
eliable, quick and very easy to use.is clean, r®essnit Sympr
®essympr
dization.ents for standar. The Plug & Prorces of errsour
e ad dispensing units ensur
p g
able, quick and very easy to use.
om KettenbachDispenser 5:1 fr®ess& Pr
-friendly handling andee of usera high degr
g
o use.
Kettenbach
y handling and
Manual dispensing for cartridge materials in 1:1 and 2:1 mixing ratios.4 dispensing gun
ridge materials in 1:1 and 2:1 mixing ratios.1 mixing ratios.
C vailable from our distributorsCurrent prices are a vailable in all markets.ges are aNot all products/packa. markets.
www.aurumgroup.com Toll Free: 1.800.661.9567338
Technical Data
Automatic mixing and dispensing unit
Product Advantages
No more manual kneading Mix easily and hygienically at the press of a buttonPrecise dispensing Consistently good resultsReduced material use Use only the amount of material required
1. Unlock the white safety pin on the activation head before initial use.
6. Place the cartridge body into the unit.
2. Insert the large foil bag with the pre-assembled activation heads into the cartridge body.
7. Close the cover.
3. Firmly press the activation head
body.
8. Extrude the material until the colour is homogenous.
4. Insert the small foil bag with the pre-assembled activation heads into the
9. Load the tray with the required amount of material. Hold the tray at an inclined angle and press lightly.
5. Fix the dynamic mixer securely on the outlet of the activation heads. Close the locking clip.
10. Simply remove and discard the emptied foil bags including the activation heads from the cartridge body.
Mains voltage: 230 V, 50 Hz 120 V, 60 Hz 100 V, 50/60 Hz
Power consumption: 170 W
Mains input fuse: 2 x 1.6 A (T) (230 V) 2 x 3.15 A (T) (100 V/120 V)
Dimensions (height x width x length): 330 x 190 x 380 mm (13 x 7.5 x 15 inches)
Weight (empty): 7.0 kg
Noise level: < 70 dB(A)
Fax: 1.800.361.5088 Email: [email protected] 339
Adhesives
Impression aids
Mixing / Dispensing / Application
Accessories
Accessories |Accessories |
Accessoriesssories
AAdhesives
M
Impression aids
Dispensing /Mixing //
mpression aids
pplicaAnsing /
ds
tionca
www.aurumgroup.com Toll Free: 1.800.661.9567340
Mucopren®
AdhesivePanasil®
AdhesiveIdentium®
Adhesive
Panasil® Adhesive 10 ml REF 43.537
Panasil® Adhesive Accessories
Accessories
For A-Silicone* (VPS)
® Adhesive 10 ml REF 43.737
® Adhesive® For Vinylsiloxanether® (VSXE)
® Adhesive 10 ml REF 43.752
® Adhesive®
Accessories
For acrylic dentures (PMMA)
AdhesiveMucopre ®n
AdhesanasP
sive®sil
AdheIdent
esive®tium
Adhesive® e Accessor
ylicFor acr
ries
c dentures (PMMA)® ylicFor acr c dentures (PMMA)
anasiP Adhesive®l Accessor
For A-Silicone*
ries
(VPS)cone*
®
Adhesive® Accessor
ylsFor Vin
ries
(VSXE)®iloxanether
Fax: 1.800.361.5088 Email: [email protected] 341
Dynamic Mixer®
Accessories
For Foil bag materials in Plug & Press® system
Mixing
®
Accessories
For Foil bag materials in Plug & Press® system
Mixing Tips Dynamic Mixer
CartridgeBody
Intraoral Tips
® ® ® ® ® ®
® ®
® ® ®
® ®
®
Accessories
For standard 1:1 50 ml automix cartridges*
Mixing
Accessories
For Mixing tips
M
In
ipsMixing T
ipsntraoral T
Dyn
Cart
namic Mixer
tridgeIn
®®®
ipsntraoral TBodCart
®®
dytridge
Acce®
For
essories
1:1 50 ml automix standard
®
®
®
®®
®
®
® ®
Mix
cartFor
Acce
ing
tridges*1:1 50 ml automix standard
essories
Dynamicc Mixer®
Acce
in PFor
For
essories
system®Plug & Pressterialsg maFoil ba
Mixing tips
®
Mix
in P
Acce
in PFor
ing
systemPlug & Press
essories
system®Plug & Pressterialsg maFoil ba
www.aurumgroup.com Toll Free: 1.800.661.9567342
Notes
Fax: 1.800.361.5088 Email: [email protected]
Notes
www.aurumgroup.com Toll Free: 1.800.661.9567