7780 willey road, harrison, ohio. 45030 phone: 513-738 ...brenco-inc.com/images/section1.pdf ·...

7780 Willey Road, Harrison, Ohio. 45030 Phone: 513-738-1808 Fax: 513-738-1832

1-800-247-5442

9BRENCO

Insulating Blankets

Eyelet StyleThese blankets were designed to be easily secured in placeby using blanket pins, Snap Buttons, or Ty-Straps.

These blankets are compliant with ASTM D1048 specifi-cations, are flexible and feature a reinforced beaded edgeand eyelets for added strength and tear resistance.

golataC.oN steleyE

MTSAfoorP/ssalC

tloVtseT

epyTlairetaM

-eziS.nI roloC thgieW

.sbl.ae

21 82 Vk02/2 larutaN/I 22x22 kcalB 3

31 82 Vk04/4 roclaS/II 22x22 egnarO 3

1-31 82 Vk04/4 roclaS/II 22x22 kcalB 3

01-31 21 Vk04/4 roclaS/II 22x22 egnarO 3

E-004 6 Vk02/2 larutaN/I 63x72 kcalB 6

E-0001 6 Vk04/4 roclaS/II 63x72 egnarO 6

E-1001 6 Vk04/4 roclaS/II 63x72 kcalB 6



E-109 6 Vk04/4 roclaS/II 63x63 kcalB 8

21E-009 21 Vk04/4 roclaS/II 63x63 egnarO 8

0051 82 Vk02/2 larutaN/I 63x63 kcalB 8



Slotted StyleThese are designed for increased versatility and flexibilityin special cover-up situations. Use for covering ridgepins, cross arms with insulators or any place a wire, pinor projection interferes with proper placement of othercover-up devices.

Three sizes are available with reinforced beaded edgesand reinforced eyelets which can be secured with blanketpins, Snap Buttons, or Ty-straps. The 36” blanket is alsoavailable with 2” or 4.5” center holes and with hook andpile. The 46” blanket features an extra rubber pad at theend of the slot for added strength.

Visit our website:www.Brenco-Inc.com

golataC.oN steleyE

MTSAfoorP/ssalC

tloVtseT

epyTlairetaM

eziS.nI roloC thgieW

.sbl

41 82 Vk02/2 larutaN/I 22x22 kcalB 5.2

51 82 Vk04/4 roclaS/II 22x22 egnarO 5.2

1-51 82 Vk04/4 roclaS/II 22x22 kcalB 5.2

0011 82 Vk02/2 larutaN/II 63x63 kcalB 7


1031 82 Vk04/4 roclaS/II 63x63 kcalB 7

2031 eloH"2 Vk04/4 roclaS/II 63x63 egnarO 7

4031 "5.4eloH Vk04/4 roclaS/II 63x63 egnarO 7

VE-0031 piZelytS Vk04/4 roclaS/II 63x63 egnarO 7




1-800-247-5442

BRENCO10

Insulating Blankets

Without EyeletsInsulating Blankets without Eyelets are available in Class2 and Class 4 in two types of material: Type I naturalrubber, and Type II Salcor, which is a highly flexible,corona-resistant polymer with excellent aging andweathering qualities.

Insulating blankets feature a reinforced beaded edge foradded strength and tear-resistance.

With & Without Hook and PileLo-Voltage Insulating Blankets are make of Type I naturalrubber. Primary Insulating Blankets are Type II Salcor.Insulating blankets are available with or without hook andpile (Zip) or plain style, as noted in the chart below.

Covering energized equipment is easier than ever usingZip-On blankets. Zip-On Style features one-inch widestrips of hook and pile double stitched to the blanket withnylon thread, so installation and removal is safe and fast.Zip-On blankets can be manufactured to fit specialrequirements.

Lo-Volt & Primary Blankets

.oNgolataC elytS

MTSAssalCfoorP

tloVtseT

epyTlairetaM


.ae

.sbl

VL-Y2121 piZ V0005/0 larutaN/I 21x21 Y 1

VN-VL-Y2121 nialP V0005/0 larutaN/I 21x21 Y 1

VL-Y8181 piZ V0005/0 larutaN/I 81x81 Y 1.1

VN-VL-Y8181 nialP V0005/0 larutaN/I 81x81 Y 1.1





SO-381 piZ Vk04/4 roclaS/II 63x81 grO 5.3

VE-0011 piZ Vk04/4 roclaS/II 63x72 grO 1.8

VE-009 piZ Vk04/4 roclaS/II 63x63 grO 5.8

VE-0031 /piZdettolS Vk04/4 roclaS/II 63x63 grO 5.8

Visit our website:www.Brenco-Inc.com

golataC.oN

MTSAfoorP/ssalC

tloVtseT

epyTlairetaM


.sbl

681 Vk04/4 roclaS/II 63x81 egnarO 5.3

0001 Vk04/4 roclaS/II 63x72 egnarO 6

003 Vk02/2 larutaN/I 63x63 kcalB 8

0091 Vk04/4 roclaS/II 64x64 egnarO 21


1-800-247-5442

11BRENCO

Blanket AccessoriesFasteners

Blanket buttons aredesigned to secureeyelet-style insulatingblankets. The B-1button, made of yellowplastic, snaps throughthe eyelet with thumbpressure on the largehead. The bright orangepolystyrene B-23 two-way buttons are insertedinto the eyelets for use with a shotgunclamp stick or standard-duty switch stick.

Magnetic BlanketButtons (MB-6) aredesigned for use ineyelets of insulatingblankets when coveringenergized portions inhard-to-cover areas likepad mounts, cubicles, switch-boards and substations.Four permanent floating magnets are mounted betweennickel-plated steel plates. May be applied manuallywearing rubber gloves, or with a shot-gun stick.

Ty-Straps (Ty-14) are 14” and 30” long and made of 1.5”wide strips of rubber with hook and pile fasteners affixedto each end. The lineman simply wraps the Ty-Straparound the positioned blanket and presses the hook andpile ends together.

B-2

MB-6

B-23

Ty-14

B-22

#.taC noitpircseD .zo.aethgieW

1-B wolleY,nottuB-panS 1

2-B talFwolleY,nottuB-panS 1

22-B egnarO,nottuBeceiPowT 1

32-B egnarO,nottuByaW-owT 1

6-BM nottuBteknalBcitengaM 7

41-yT gnoL"41,spartS-yT 2

03-yT gnoL"03,spartS-yT 4

Clamp PinsIn addition to other uses in the utility industry, BlanketClamp Pins can be effectively used to hold insulatingblankets in place. Springs are used for tension while extraholes in the body of the pin are used to grip conductorsand prevent line hose from sliding.

Blanket Pins are made of fiberglass reinforced nylon orsliver-free hardwoods. Most pins have molded rubber tipsto increase slip resistance.

26

20

YN-20

25

21 HS-21

StorageBlanket Canisters molded in bright orange, hi-impactpolyethylene protect insulating blankets when not in use.A tight-fitting cap is secured to the canister with polypro-pylene rope.

Blanket Roll Ups provide a safe and convenient meansfor protecting blankets from damage while in transport orstorage. Ruggedly constructed of 12 oz. water resistantduck with 12” side flaps to confine the blankets intoposition and prevent damage to the edges. Two heavy webstraps with buckles close the roll up, and a double webcross strap serves as a carrying handle.

22

P-6

#taC noitpircseD gninepOwaJ .aethgieW.sbL

02 stooBniP/wdooW "57.4 33.

02-NY pirGeruS/wdooW "57.4 33.

12 stooBniP/wnolyN "5 52.

52 stooBniPo/wdooW "6.1 52.

62 stooBniP/wdooW "7 5.

12-SH *stooBniP/wnolyN "5 52.

nuGtohShtiwdeilppA*


1-800-247-5442

BRENCO12

#.taC noitpircseD teknalBeziS snoisnemiD yticapaC thgieW

.sbL.ae

2-P retsinaC "63 "73x"5 2-1 2

3-P retsinaC "63 "73x"6 3-1 3

4-P retsinaC "63 "73x"7 4-1 5.3

6-P retsinaC "63 "73x"9 6-1 5

74-3-P retsinaC "64 "74x"6 2-1 4

22 pu-lloR "22 "33x"14 4-1 5.1

63 pu-lloR "63 "64x"45 4-1 5.2

64 pu-lloR "64 "64x"45 4-1 4

Switchboard MattingSwitchboard Matting is placed permanently in front ofswitchgear, motorcontrol centers andother high voltageapparatus to providepersonal protectionfor workers. It is alsoused when tendingtake-up and pay outreels and whenadding or replacingconductors. Made from high quality Type II rubber, 1/4”thick tested to 20kV to comply with ASTM D178, Class 2specifications. The corrugated surface acts as a safetytread while reducing the possibility of metal particlesbecoming embedded. Switchboard matting is available in25 yard rolls which can be custom cut to specified lengthsper customer request. Maximum Use Voltage: 17,000

M-242

.oN.taC snoisnemiD drayrepthgieW

2-42-M "42x"4/1 sbl9

2-03-M 03x"4/1 sbl21

2-63-M "63x"4/1 sbl51

2-84-M "84x"4/1 sbl81

URD/SwitchboardBlanket, 84” x 36”, isideal whenever, a largeinsulating barrier isrequired to protectelectrical workers frombrush contact with live

electrical apparatus. The URD has 10 eyelets and is madefrom red Type II SALCOR, proof tested to 20kV. The R-96 canvas/roll-up carrier is recommended for a groundbarrier when URD 367 is used outdoors.

.oN.taC snoisnemiD drayrepthgieW

763 "63x"48 sbl91

)reirrac(69-R dnuorGpU-lloRreirraB sbl5.3

Line Hose & ConnectorsConventional Style Line Hose is available in eitherorange or white Type II SALCOR. SALCOR remainsflexible even in cold weather and it is not damaged byozone or ultraviolet rays. Each system has RIB-GRIPlocking system. The straightor connector end style isavailable in three sizes 1” and 1.25” I.D. rated at 20kV,Class 2 and 1.5” I.D. rated at 30kV, Class 3. Straightstyle SALCOR hose is also available in 2” or 2.5” I.D.rated at Class 3.Conventional Line Hose Connectors are made fromType II Orange SALCOR and can be used on 1”, 1.25”,or 1.5” I.D. conventional line hose. To connect 2” and2.5” I.D. conventional line hose, use the SU SystemConnector.

OR125-45C

ORC125

SU150-45

Line Hose wo/couplers.oNgolataC

)egnarO(.oNgolataC

)etihW( ssalC snoisnemiD .sbl/thgieW

3-001RO 3-001RW 2 '3x"1 3

54-001RO 54-001RW 2 '5.4x"1 4

6-001RO 6-001RW 2 '6x"1 5.5

3-521RO 3-521RW 2 '3x"52.1 4

54-521RO 54-521RW 2 '5.4x"52.1 6

6-521RO 6-521RW 2 '5.4x"52.1 5.7

3-051RO 3-051RW 3 '3x"5.1 5

54-051RO 54-051RW 3 '5.4x"5.1 7

6-051RO 6-051RW 3 '6x"5.1 5.9

3-002RO 3 '3x"2 5.5

54-002RO 3 '5.4x"2 8

6-002RO 3 '6x"2 11

3-052RO 3 '3x"5.2 7

54-052RO 3 '5.4x"5.2 5.01

6-052RO 3 '6x"5.2 41


1-800-247-5442

13BRENCO

Line Hose w/couplers

Line Hose Connectors

**All Line Hose Complies with Current ASTM D1050 Specifications**

Extended Lip SU System Line HoseThe Extended Lip SU System is the only completeflexible cover-up available for use on voltages through34.5kV. Extremely versatile, it may be installed by hand,wearing rubberinsulatinggloves, from aninsulated aerialdevice orplatform, orwith hot sticksusing the SU applicatorsManufactured from superior SALCOR Type II Elastomer,it is resistent to the effects of ozone and ultravioletdeterioration. It remains flexible even at sub-zerotemperatures.The RIB GRIP construction securely interlocks with itscorresponding covers and connectors. Tapered lipsfacilitate easy starting on the conductors. The contour cutends accommodate the skirts of pin type insulators andpermit hose to cover the line snug to a saddle or clamp.Available as Straight Line Hose or with a ConnectorEnd for easier connection of line hose and covers.Identification marks on the lips show correct placement ofthe SU applicator. Alifting eye is moldedon the connector endfor removal with hotsticks. Line hose isalso available with the#2323 Shot Gun Eye Assembly. Add a suffix of “E” to thecatalog number or order the #2323 Shot Gun Assemblyinstalled on the hose or order the #2323 separately.

SU System Connectors are made from orange SALCORType II. RIB-GRIP construction is used to ensure a stronglock to the straight lengths of SU System Line Hose andcovers. The UC-2 is used toconnect Extended Lip Hose toPTHL and LRG InsulatorCovers, OR-134 Dead EndProtectors, and 2” and 2.5” SUSystem and Conventional LineHose.

SU Connector End Line Hose

#taC snoisnemiD ssalC .aethgieW.sbL

C3-051US '3x"5.1 IIepyT4 7

C54-051US '5.4x"5.1 IIepyT4 9

C6-051US '6x"5.1 IIepyT4 21

SU System Connectors

#taC snoisnemiD ssalC eniL/wesUesoH

thgieW.sbL.ae

CU "6x"5.01 4 .aid"5.1 2

2-CU "57.7x"5.01 4 .aid"5.2&"2 3

The Extended Lip SU System may be installed by usingrubber gloves or hot sticks on distribution voltages34.5kV. SU System Applicators come in three styles

The Hardwood Blade Applicators are available with eithera universal fitting or an eye for shot guns. The 24” longblade is recommended for installing 3’ and 4.5’ LineHose. The 36” blade works best on 6’ line hose, while the6” blade handles application and removal of shorterlengths of Line Hose. The prong extending from one sideof the universal head is used for placement and removal ofSU System Insulator Covers, Cutout Covers, StirrupCovers and Connectors when using the molded eyelets ofthe equipment.

UC-2

Extended Lip SU Line Hose

SU150-3C

2323

)egnarO(#taC )etihW(#taC ssalC snoisnemiD thgieWsbL.ae

C3-001RO C3-001RW 2 '3x"1 5.3

C54-001RO C54-001RW 2 '5.4x"1 5

C6-001RO C6-001RW 2 '6x"1 5.6

C54-521RO C3-521RW 2 '3x"52.1 5.4

C6-521RO C6-521RW 2 '6x"52.1 9

C3-051RO C3-051RW 3 '3x"5.1 6

C54-051RO C54-051RW 3 '5.4x"5.1 8 #golataC snoisnemiD ssalC .sbl/thgieW

3-051US '3x"5.1 IIepyT4 6

54-051US '5.4x"5.1 IIepyT4 5.8

6-051US '6x"5.1 IIepyT4 21

3-002US '3x"2 IIepyT4 6

54-002US '5.4x"2 IIepyT4 01

6-002US '6x"2 IIepyT4 41

3-052US '3x"5.2 IIepyT4 7

54-052US '5.4x"5.2 IIepyT4 11

6-052US '6x"5.2 IIepyT4 51

golataC.oN

)egnarO(

golataC.oN

)etihW(ssalC snoisnemiD .sbl/thgieW

001CRO 001CRW 2 "21X"1 5.2

521CRO 521RW 2 "21x"52.1 5.3

051CRO 051RW 3 "21x"5.1 3


1-800-247-5442

BRENCO14

The Shot Gun Eye Assemblies for the SU System equip-ment may be purchased separately for installation on theappropriate cover-up device. Theaddition of theseeye assembliesenable all SUSystem equipmentto be easilyhandled withstandard ShotGun.

UA-E2

#taC noitpircseD nOesU thgieW.sbL.ae

2/1-AU edalBdoowdraH"6rotacilppA lasrevinU 2

2-AU edalBdoowdraH"42rotacilppA lasrevinU 3

3-AU edalBdoowdraH"63rotacilppA lasrevinU 4

2/1-E-AU edalBdoowdraH"6rotacilppA nuGtohS 2

2-E-AU edalBdoowdraH"42rotacilppA nuGtohS 3

3-AU edalBdoowdraH"63rotacilppA nuGtohS 4

3232 USrofylbmessAeyE431-RO&esoH nuGtohS 1

9532 USrofylbmessAeyEsrevoCmetsyS nuGtohS 5.

0432 USrofylbmessAeyEsrotcetorP.E.D nuGtohS 5.

Protectors & CoversInsulator Covers in white or orange, weather resistantType II SALCOR, are used with conventional line hose tocover pin-type insulators. All covers feature RIB-GRIPconstruction to lock to the underside of the insulators. Thelarge diameter arm overlaps the small arm of the adjoin-ing cover on double arm constructions which providescomplete insulation at the joint regardless of the varyingdistance between pins.

Conventional Dead End Protectors cover 4.25” and 6”bells including conductor and hardware and are madefrom orange Type II SALCOR with RIB-GRIP construc-tion. Series 101 has outer ribs that allow it to be used with2” and 2.5” I.D. Conventional Line Hose when using theUC-2 Connector. The Smaller Series 114 may also be usedto cover transformer bushings up to 4.75” in diameter.Replacement Straps are available.

To work on live lines safely, conductors encased in a linehose should never be placed directly on a cross arm.Orange Type II SALCOR Cross Arm Covers reduceelectrical stresses on line hose or jumpers. Cross ArmCovers fit standard cross arm pin spacing and each unithas interior ribs to minimize shifting on the arm.

Flexible Cutout Covers, Made from Type II orangeSALCOR corona resistant elastomer, can be used foroverhead cutouts as well as for underground pad-mountapplications. Cutout Covers comply with the currentASTM D1049 specifications.

145

CC24

OFRG

OJRG

OKRG

OR101 OR114

OR124

N-36

N-24 Chart on next page.....


1-800-247-5442

15BRENCO

Dead End ProtectorsDead End Protectors quickly cover dead end bells provid-ing complete, electrical protection for class 3 and 4applications.

Easily installed and removed from an insulated platformor aerial device with rubber gloves or SU SystemsApplicators.

All styles have RIB-GRIP construction to interlock with1.5” I.D. line hose. The class II U-106 and U-110 mustbe used with Connector End style line hose or separateLine Hose Connectors. The Class 4 OR-134 exceptStraight Line Hose. The outer ribs interlock with 2” and2.5” I.D. line hose when the UC-2 SU System Connectoris used.

OR-134

OR-134-E

U-110

All Protectors comply with current ASTM D1049 Specifications

Insulator CoversThe UH Pin-Type Cover covers insulators up to ANSIClass 5. The sides are cut to be used on small insulatorswithout resting on the cross arm. When covering a 7”diameter insulator on a double arm construction, the endsof the cover will meet flush on 10.5” pin centers.

The LRG SU System Pin-Type Cover fits insulators10.5” in diameter and is used with 2.5” Class 4 ExtendedLip SU System Line Hose. Always use clamp pins tosecure the device into position. Pinning rings have beenplaced on the cover’s arms to prevent separation.

Post-Type Insulator Covers interlock with 1.5” Class 4Extended Lip SU System or Conventional Line Hose.The PTHS for insulators up to 12” and the PTHL forinsulators up to 16” in height. The PTHL cover also hasexternal ribs on the ears which secures 2.5” I.D. line hose.Always use clamp pins to secure the device into position.

The Class 4 MRG Universal Cover covers pin-typeinsulators through 8.5” diameter and 13.8kV post-typeinsulators. A trim bead permits use on both 35kV and15kV crossarm construction.

The USC is a lightweight cover made from orange Type IISALCOR that can be installed using rubber gloves or ahot stick. The USC also feature RIB-GRIP constructionand is meant to be used with Extended Lip SU Systems orConventional Line Hose.

All covers are made from orange SALCOR and featureRIB-GRIP Construction. They can be installed with a hotstick or rubber gloves. All covers comply with ASTM1049 specifications.

.oN.taC ssalC noitpircseD snoisnemiD thgieW.sbL.aE

egnarO etihW rotalusnIssalC

esoHeniLeziS

GRFO GRFW 2 3/2/1-55 "1 "5x"5.41 5

GRJO GRJW 2 4-55 "1 "5.6x"61 6

GRKO GRKW 3 5-55 "52.1 "8x"61 7

srotcetorPdnEdaeD eziSlleB esoHeniLeziS

101RO 2 "6-2 "1 "81x"32x"5.6 01

411RO 3 "52.4-1 "5.1 "01x"41x"57.4 4

421RO 3 "52.4-2 "51 "81x"92x"57.4 8

srevoCmrAssorC pusmrAssorCnoesUot

541 2 "5.4x"4 "51.4x"36.4x"5.41 3

6811 4 "6x"5.5 "5.5x"6x"71 5

srevoCtuotuC

42CC 2 "5.3x"51x"42 4

03CC 4 "7x"02x"03 01

spartStnemecalpeR

42-N seireS421&411roF "03x"57. zo2

63-N seireS101roF "63x"57. zo2

#taC MTSAepyT/ssalC eziSlleBstiF snoisnemiD roloC thgieW

sbL.ae

srotcetorPdnEdaeD D.IydoB

llarevOhtgneL

431-RO II/4 "52.4-3 "5 "73 egnarO 31

E-431-RO II/4 "52.4-3 "5 "73 egnarO 41

601-U II/3 "6-2 "7 "5.82 kcalB 6

011-U II/3 "01-2 "5.01 "5.82 kcalB 01

ylbmessAeyEnuGtohS3232#htiwredroot"E"xiffuSddA


1-800-247-5442

BRENCO16

MRG

PTHS

#taC -ssalCepyT/

eniLesoHeziS

stiF.lusnI

.D.IydoB thgieH

thgieW.ae.SBL

srevoCrotalusnIEPYTNIP

GRL II/4 "5.2 "5.01 "21 "61 8

HU II/3 "5.1 "7 "5.7 "21 6

GRM II/4 -5.1"5.2 "5.8 "9 "52.21 7

srevoCrotalusnIEPYTTSOP

LHTP II/4 -5.1"5.2 "5.6 "7 "61 8

SHTP II/4 "5.1 "7 "5.7 "21 4

CSU II/4 "5.1 "41 "5.51 5

Special Covers

Cable End Caps can be applied with rubber gloves or ahot stick. They are used on high voltage distributioncable ends found in vaults, cubicles and substations whencable remains energized during work. Cable End Capsare made from Type II orange SALCOR and have aminimum wall thickness of .25”

The Slotted Cable End Cap 636S can be installeddirectly over an energized silver-sand fuse, bushing orelbow and cable. A 3” hole at the top allows room for theinsulator, elbow or terminator cable. Special lengths orslots can be made by contacting us.Lightning Arrestor Covers are made from Type IIorange SALCOR. The slot allows the cap to fit directlyover the energized lightning arrestor and the line connec-tion.

536

536A

636A

C-8

Arrester Covers

Cable End Cap

#taC ssalC epyT snoisnemiD thgieW

spaCdnEelbaC

8-C 2 II "9x"5.2 3

635 4 II "73x"57.4 7

636 4 II "73x"88.5 9

S636 4 II "73x"88.5 9

srevoCretserrAgninthgiL

A635 4 II "51x"5.4 3

A636 4 II "22x"5.5 5

PTHL

Cover Ribs LRG

UH

USCUSC - SIDE VIEW

#taC ssalC epyT snoisnemiD eziSelbaC thgieWsbL.ae

371 2 II "6x"18. 0/4-4# 52.

711 2 II "01x"83.1 MCM005-0/4 05.

771 2 II "21x"52.2 MCM057-053 57.

871 2 II "61x"91.3 MCM0001-008 5.1


1-800-247-5442

17BRENCO

117 173 178

Pole GuardsPole Guards are installed before setting new poles toguard against accidental line contact. They also guardagainst pole contacts by personnel working in insulatedaerial buckets or on platforms. Pole Guards are madefrom orange thermoplastic, Type I ABS, cold weather,high impact plastic, Grade III. Salisbury Pole Guardsfeature the unique Air Gap design. Uniformly spaceddimples minimize the amount of surface area contactingthe pole. This provides added insulation to keep electrical

leakage to a minimum. When two poleguards are used to cover longerlengths, the air gap dimples nesttogether “locking” the two togetherwith ample overlap. The Air Gapdesign also allows for air flow betweenit and the pole minimizing moisturecondensation and contaminationbuildup.Pole Guard use should be limited tobrush contact. The opening shouldface away from possible line contacts,whenever possible. Pole Guards shouldbe stored indoors to avoid prolongedexposure to UV rays and should be

cleaned with awarm detergentsolution.

2486

BondedHandle

#taC htgneL nI.aiD eldnaH ssalC thgieWsbL.ae

1582 '1

"6 dellirD 4

3.3

2582 '2 3.6

3582 '3 9

4582 '4 11

6582 '6 71

5831 '1

"9 dellirD 4

6.3

6831 '2 7

6531 '3 01

7531 '4 21

6942 '6 91

0644 '4"9 dednoB 5

21

6842 '6 91

1642 '1

"21 dellirD 4

5

2642 '2 8

4642 '4 51

6642 '6 22

4742 '4"21 dednoB 5

51

8742 '6 22

Versa and Link GuardsVersa and Link Guards make use of air as well as thedielectric strength of plastic to provide total insulatingvalue. Both guards are 7” in diameter and have a hookshaped inner lip to keep the guard in place.

Versa Guards, with a voltage rating of 34.5kV, aredesigned so that two guards can be telescoped together tocover most 13kV single and double arm, pin and postconstructions. A lighter 47” version of the standard 4.5’Versa Guard is available in a TypeIII PPO material. These guards cannest together in a compartment 4’long.Link Guards, with a voltage ratingof 69kV, have inner and outer shellsthat run full length to include maleand female couple ends. Two guardsconnected provide for overlappingthickness of plastic plus air at ajoint.

Tee Connectors are used on hori-zontal and vertical posts andsuspension insulator strings whenplastic line guards are used on theconductor. Made from Type I, ABSplastic with eye fittings, the connec-tor accommodates the male end of aguard. Available in two ratings:69kV and 46kV. Accepts 34.5kV pininsulators along with post andinsulator strings. 2475


1-800-247-5442

BRENCO18

1686

2884

If you do notsee somethingyou want pleasecall !

#taC noitpircseD epyT edarG thgieW.sbL.ae

'5.4Vk5.43sdrauGasreV

6861 eyESBA I 2 8.8

7861 kcitS'4SBA I 1 8.01

8861 kcitS'6SBA I 1 8.11

3732 eyEOPP III 2 8.8

7732 kcitS'4OPP III 1 8.01


9832 kcitS'4OPP"74thgiL III 1 1.6

9862 eyEOPP"74thgiL III 2 1.8

'5.4Vk96sdrauGkniL

0861 eyESBA I 2 5.01

1861 kcitS'4SBA I 1 5.21

2861 kcitS'6SBA I 1 5.31

5742 eyEOPP III 2 5.01



srotcennoCeeT

4222 Vk96 I 2 8.7

4882 Vk64 I 2 0.6

All guards are tested to ASTM F712 and are manu-factured to ASTM F968 Specifications

Lightweight Conductor Covers are ideal to cover longspans when weight is a consideration. This cover is madefrom orange Type I high density cross link polyethyleneand has a voltage rating of 27kV. They can be appliedwhen wearing rubber gloves or with a fiberglass stick.Available with an eye for application with shotgun sticks.

21172

21173

#taC noitpircseD edarG thgieWsbL.ae

srevoCrotcudnoC

27112 eyE/wrevoC'5 2 4

37112 eyEo/wrevoC'5 3 3

51312 kcitSssalgrebiF'4/wrevoC'5 1 5

43212 eyEretpadA - 5.1All guards are tested to ASTM F712 and are manufac-tured to ASTM F968 specifications

Crossarm Guards are available in two different styles:the 1370 pin type and the 1371 post type. They are usedto prevent tie wires from contacting crossarms during hotline operations. Two different tie downs are provided: aneoprene and a polypropylene rope. Both are secured inthe slots provided in the eye fitting. The post type modelhas an automatic gap close which covers the insulator slotopening over theend of the arm.

The Slide-OnCrossarm Guard736PH is appliedby sliding thecover on the armfrom the endusing the Grade 2shotgun eye until the unit locks onto the insulator pins.The cover overlaps on top and has notches to easeapplication and removal.

Both of these guards are made from orange Type I ABScold weather, high impact plastic.

1370

21315

Crossarm Guards

Lightweight Conductor Cover


1-800-247-5442

19BRENCO

736PH

13701371

Lineman’s GlovesSelecting the right size, length and style. Lineman’sgloves are available in a full range of sizes from 8 through12, including half sizes. Proper fit is important to mini-mize chafing and fatigue. To determine glove size,measure the circumference of the hand between the thumband index finger and add one inch. Allow for additionalroom if fabric glove liners are to be worn, especially withthermal liners.

Class 0 and 00 gloves are available in 11 and 14 inchlengths. Class 00 Electrical Insulating Rubber Glovesare made from either red Type I natural rubber or blueType II SALCOR. Both are extremely flexible to makeworking with small parts easy. The gloves meet or exceedASTM D120 and EIC 903 Standards. Store gloves in acontainer exclusively for them and clean with Salcocleaner. Dust with 10-4 glove dust when dry.

Class 1 through 4 gloves are available in the industrystandard colors of yellow, red and black, or in contrastingtwo color combinations. The contrast between the thinouter color against the inner color makes inspecting forcuts and tears easier, when the glove is inflated orstretched. Class 0 gloves are available in yellow, red andblack.

Class 1 through 4 gloves are available in 14, 16 and 18inch lengths. A straight cuff is standard on 14” & 16”gloves.

For 18” gloves either a straight or controur cuff isavailable. A contour cuff is angled to prevent bunching orbinding at the elbow when the arm is bent. Designate SCfor straight cuff or CC for contour cuff.

A bell cuff, which accommodates heavier winter clothing,is available for Class I through 4 gloves. Bell cuff glovesare not available in sizes 8 or 8.5H.

11-00BL

11-00R

Bell Cuff Contour Cuff

Straight Cuff10-4 Glove Dust

#taC noitpircseD snoisnemiD thgieWsbL.ae

0731 epyTniP66-XG "5.52x"9x"9 7.5

1731 epyTtsoP07-XG 6x5:mrassorCxaM 6

HP637 mrassorCnoedilS "63x.D.I"7 5.4


1-800-247-5442

BRENCO20

evolGhtgneL ssalC roloC eziS

11 00 RroLB,5.9,9,5.8,8,11,5.01,01

21,5.11

41 00 RroLB,5.9,9,5.8,8,11,5.01,01

21,5.11

Cat # Breakdown for Class 00 Gloves

R=Red Type I Natural RubberBL=Blue Type II SalcorExample: 11-00BL-8

foorPVktseT

evolGhtgneL ssalC roloC eziS

5 11 0 R,B,Y,9,5.8,8

,01,5.9,11,5.01

21,5.11

5 41 0 R,B,Y,9,5.8,8

,01,5.9,11,5.01

21,5.11

Cat # Breakdown for Class 0 Gloves

R=Red B=Black Y=YellowExample 5-11Y-8

tseTfoorPVk

evolGhtgneL roloC eziS

01 81ro61,41 roBY,B,.R,YBR

,9,5.8,8,01,5.9,11,5.01

21,5.11




Cat # Breakdown for Class 1, 2, 3, 4 Gloves

B=Black Y=Yellow R=Red YB=Y inside B OutRB=R inside B outExample 10-16B-10.5*Class 4 Gloves come in full and half sizes 10-12 only*

Glove LinersLiner gloves reduce the discomfort of wearing RubberInsulating Gloves in all seasons. For year round use,liners provide warmth in cold weather, while they absorbperspiration in the warm months.

64

Check out ourwebsitewww.brenco-inc.com

Leather Protectors

High VoltageProtector - ILP5S

Low VoltageProtector - ILP10

Leather Protectors Gloves should always be worn overRubber Insulating gloves to provide the needed mechani-cal protection against cuts, abrasions and punctures.

It is the responsibility of the purchaser to specify theoverall length of the protectors gloves.

ssalCevolG srotcetorPfospoTneewteBecnatsiD.niMsevolGrebbuRdna

00,0 "2/1 mm31

1 "1 mm52

2 "2 mm15

3 "3 mm67

4 "4 mm201

Glove Clearance Table

WARNING: Do not use leather protectorsalone for protection against electric shock.Serious injury or death will result. Alwaysuse proper rubber insulating gloves.

sevolGegatloVhgiHedihwoCnatkcuB

rebmuNgolataC noitpircseD

S3PLI .L.A.O"21

S5PLI .L.A.O"41

S6PLI .L.A.O"51

C7PLI .L.A.O"61


1-800-247-5442

21BRENCO

dnarebbuRs'nameniLroftrahCgnilebaLMTSAtnempiuqEevitcetorProclaS

roloCssalC tseTfoorPCD/CAegatloV

esUxaMCD/CAegatloV

rofnoitisoPlacirtcelE

rekroW

egieB00 000,01/005,2 057/005dnuorG

roerutcutSteksaB

deR0 000,02/000,5 005,1/000,1dnuorG

roerutcurtSteksaB

etihW1 000,04/000,01 052,11/005,7 roerutcurtSteksaB

wolleY2 000,05/000,02 005,52/000,71yllacinortcelE

teksaBdetalosImroftalPro

neerG3 000,06/000,03 057,93/005,62yllacinortcelE


egnarO4 000,07/000,04 000,45/000,63yllacinortcelE


Linemen’s SleevesRubber Insulating Sleeves extend coverage of the armfrom the cuff of rubber insulating gloves to the shoulder-fully protecting these areas from accidental contact withenergized conductors and equipment. Sleeves feature areinforcing fold at the cuff. This fold is preferred over arolled bead because it adds less bulk to the cuff and fitsinto the glove easier without pushing. Two differentprocesses are used to manufacture insulating sleeves:dipping and molding. Both meet the current require-ments of ASTM D1051 and offer the same high level ofquality and protection.Dipped Sleeves are manufactured in the same way asrubber insulating gloves, Porcelain forms are dipped intoliquefied rubber, dried, trimmed, marked and cured.Every sleeve receives the same quality inspections andelectrical testing before shipping. Dipped sleeves areavailable in the same colors as dipped gloves, includingtwo color combinations.

Extra Curved Arm

Curved Arm

Straight ArmMolded Sleeves are manufactured by either injection orcompression molding methods. The advantage thesemethods offer is the ability to produce sleeves of Type I orSALCOR Type II synthetic rubber. SALCOR sleevesprovide the same high quality and electrical protection asnatural rubber, with the added benefit of being resistant toozone and ultraviolet radiation. Type I sleeves areavailable in black, yellow, or maroon. Type II SALCORsleeves are black or orange. Molded Sleeves are availablein curved arm style only.

Molded Sleeve

seveelSdeppiDrofnwodkaerB#taC

ssalCegatloV eziS roloC

1D LXroL,RwolleY=Y

deR=RkcalB=B

tuoBedisniY=BYtuoBedisniR=BR

2D LXroL,R

3D LXroL,R

4D LXroL,R

R=Regular L=Large XL=Extra LargeExample: D2-L-YB

Add suffix “ST” to order straight cuff or “EC” forextra curved cuff.


1-800-247-5442

BRENCO22

seveelSIepyTdedloMrofnwodkaerB#taC


1 LroR B

2 LXroL,R Y,B

3 LroR Y

4 LroR M

R=Regular L=Large XL=Extra LargeB=Black Y=Yellow M=MaroonExample: 2-L-B

seveelSIIepyTdedloMrofnwodkaerB#taC


1 LroR SOroSB

2 LXroL,R SOroSB

R=Regular L=Large XL=Extra LargeBS=Black SALCOR OS=Orange SALCORExample: 2-L-OS

Glove and Sleeve Accessories

Sleeves should be selected to fit the arm comfortably,covering from the top of the shoulder to inside the top ofthe glove. Regular size sleeves are the shortest and havethe smallest arm and wrist openings. To minimize thepossibility of the sleeves pushing gloves off the hand, sizethe sleeve to the shortest length possible while maintain-ing complete coverage to the shoulder.

seveelSs'nameniLgniziS

llarevOhtgneL

mrArednUhtgneL gninepOmrA tsirW

gninepO

ralugeR

"5.62 "5.51 "52.21 "52.5

egraL

"57.72 "61 "78.21 "78.6

egraLartxE

"5.92 "5.71 "78.21 "7

Glove Bag2223-9-BREN8” L 4” W 18” H

Glove & Sleeve Bag2426-BREN8” L 6” W 18” H

**Other Sizes and Types Available**

B-22 B-2

Buttons

B-22 Two Piece Sleeve ButtonB-2 One Piece Sleeve Button4 Required per Pair of Sleeves

H-1 Sleeve Harness with Buttons

S-1 13.5” Strap with ButtonsS-15 15” Strap with Buttons

www.Brenco-Inc.com


1-800-247-5442

23BRENCO

G-1 Glove Inflator

G-2 Glove Inflatorw/Hand Pump

G-99 Glove Inflator Kit

S-55 Salcor Cleaner

S-99 Silicon Sprayfor Natural Rubber and SALCOR

1451 RuboutHand Cleaner

Dielectric Boots51581 DeepHeel Over-Shoes20,000 Volt

51581 Comes in Whole & Half Sizes

**Other Types Available**

31924 Deep HeelOver Shoes20,000 Volt4 Buckle

Super Dielectric Deep Heel Overshoes Provide extrasafety when climbing ladders and poles where the deepheel cavity can lock onto the rungs. These boots andovershoes are made from an ozone resistant yellow rubberthat’s 100% waterproof. The construction is hand-layeredin full-cut patterns to fit over work boots. The fabriclining makes them easy get on an off. The sole is an anti-skid bar tread. All of these overshoes and boots meetANSI Z41 requirements. Super Dielectric footwear hasbeen tested to 20,000 volts.

Super Dielectric Deep Heel Overshoes come in four stylesall with pole-climbing reinforcement patch. The StormRubber Overshoe is available without buckles or with twobuckles. The Full-Cut Overshoe with adjustable side strapis available in 14” and 17” Heights.

Anti-SkidBar Tread

7780 willey road, harrison, ohio. 45030 phone: 513-738 ...brenco-inc.com/images/section1.pdf ·...

Documents