Plant Closed

MODERN TRANSMISSION DEVELOPMENT (MTD)2555 Brandenburg Road in Leitchfield, Kentucky 42754

WEBCAST ONLY - NO ONSITE BIDDING

FRIDAY, JUNE 19THStarting at 10AM ET

Inspection: Day Prior to Auction From 9AM-4PM

PUBL

IC A

UCTI

ON

(5) CST STORAGE & Other Silos

(7) METAL MECHANICS & Other50-Ton & 35-Ton Trim Presses

(7) FANUCExtraction Robots

(9) FRANK W. SCHAEFER & Other Melting & Holding Furnaces (9) HYSTER & CAT Forklifts to 12,500-lb. Capacity

(24+) AQUA THERM Temperature Control Units(3) ACCU CHILLER & SHINI Chillers

(14) UNA-DYN, BRY-AIR, DRI-AIR, CON-AIR & SHINI Hopper Dryers & Dryers

(8) HPM, IDRA & CAST MASTER 1,000-Ton to 600-TonHorizontal Die Casting Machines

(17) CINCINNATI, TOSHIBA, HUSKY, NISSEI, MITSUBISHI, HPM & VAN DORN2,450-Ton to 400-Ton Plastic Injection Molding Machines

New As2012

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com

105 Revere Drive, Suite C I Northbrook, IL 60062Phone: 224/927-5320 I Fax: 224/927-5311www.pplauctions.com

2 0F 8

1 0F 14

1 0F 17

2,450-Ton to 400-Ton1,000-Ton to 600-Ton

1 0F 7

To 50-Ton

1 0F 7 1 0F 9 1 0F 9

1 0F 3

14 0F 24+

New As2015

2

(8) HPM LL-900-A, LL-600-A, IDRA OL & CAST MASTER D-1000-A1,000-TON TO 600-TON HORIZONTAL DIE CASTING MACHINES

(2) METAL MECHANICS 35-Ton Trim Presses FRANK W. SCHAEFFER Melting Furnace

6 0F 8 1,000-Ton to 600-Ton

(7) FANUC R2000ia 165F & R2000ib 165F Extraction Robots

4 0F 7

(3) METAL MECHANICS 50-Ton Trim Presses

2 0F 3

New As2009

(4) Melting Furnaces(4) FRANK W. SCHAEFFER Holding Furnaces

3 0F 43 0F 4

3

(17) CINCINNATI, TOSHIBA, HUSKY, NISSEI, MITSUBISHI, HPM & VAN DORN2,450-TON TO 400-TON PLASTIC INJECTION MOLDING MACHINES

12 0F 17 2,450-Ton to 400-Ton

UNA-DYN DHD-11 Dehumidifying Hopper Dryer SHINI SHD Hopper Dryer UNA-DYN Dryer Vacuum Pump (6) DRI-AIR & CON-AIR Dryers

3 0F 6

2,450-Ton

4

DIE CASTING MACHINES

CAST MASTER 1000-Ton Horizontal Die Casting Machine, Model D-1000-A, S/N 65-359, New 1965, 68” x 76” Platen, 43” x 43” Distance Between Tie Bars, 9” Tie Bar Diameter, 24” to 44” Die Height, Visitrak, Controllogix 1769-L32E Controller (BAY 8)(4) HPM 900-Ton Horizontal Die Casting Machines, Model II-900-A, 61” x 67.5” Platen, 38” x 38” Distance Between Tie Bars, 8” Tie Bar Diameter, 16” to 40” Die Height, Visitrak, AB PLC5-20 Controller, S/N 94314, New 1994 (BAY 1) • S/N 94315, New 1994 (BAY 2) • S/N 94316, New 1994 (BAY 9) • S/N 139, New 2000, (BAY 10)IDRA 661-Ton Horizontal Die Casting Machine, Model OL 560, S/N 6901, New 1995, 41.9” x 41.9” Platen, 31.5” x 28” Distance Between Tie Bars, 5.5” Tie Bar Diameter, 13.8” x 32.5” Die Height, Visitrak, Controllogix 1756-L71 Control-ler (BAY 3) (2) HPM 600-Ton Horizontal Die Cast-ing Machine, Model II-600-A, 48” x 48” Platen, 29” x 29” Distance Between Tie Bars, 6” Tie Bar Diameter, 14” to 36” Die Height, AB SLC 5/04 Controller, S/N 88243, New 1988 (BAY 4) • S/N 74516, New 1974 (BAY 7)

DIE CASTINGTRIM PRESSES

(3) METAL MECHANICS 50-Ton Trim Presses, New as 2009, 30” Stroke, 47” Open Height(2) METAL MECHANICS 35-Ton Trim Presses(2) CUSTOM Trim Presses, 50-Ton & 35-Ton

DIE CASTING ROBOTS(7) FANUC R2000ia 165F Extraction Robots

DIE CASTING FURNACES

FRANK W. SCHAEFFER Melting Furnace, Capacity 22500, S/N 793220, New 1994(4) FRANK W. SCHAEFFER Holding Furnaces, Capacity 1900, New 1994(4) Melting Furnaces

PLASTICINJECTION MOLDERS

TOSHIBA 2,450-Ton Injection Mold-ing Machine, Model IS2500 DFA3-110A, S/N 862005, New 1999, 213 oz, 14 Eject, 82H/68V Rod Space, 35.4”

Min SH, 66.9” Max SH, 137” Daylight, 70.9” Max Stroke, 115mm Screw Diam-eter (L20) CINCINNATI 2,200-Ton Injection Molding Machine, Model VL2200-540, S/N H24A0194003, New 1994, 288 oz, 72.4x62.9 Rod Space, 38” Min SH, 116” Daylight, 78” Max Stroke, 160mm Screw Diameter (L22) HUSKY 2,200-Ton Injection Molding Machine, Model E2000RS170/140, S/N 12741, New 1998, 364 oz, 13.7 Eject, 74.8Hx59.1V Rod Space, 39.37” Min SH, 66.93” Max SH, 141.7” Daylight, 74.8” Max Stroke, 140mm Screw Diam-eter (L21) CINCINNATI 2,200-Ton Injection Molding Machine, Model ML2200, S/N H36A0200002, New 2000, 413 oz, 10.74 Eject, 72x63 Rod Space, 30.5” Min SH, 70.9” Max SH, 141.73” Daylight, 110.24” Max Stroke, 140mm Screw Diameter (L19) CINCINNATI MILACRON 1,500-Ton Injection Molding Machine, Model VL1000179, S/N M22A-01944009, New 1994, 179 oz, 10.25 Eject, 52” Rod Space, 17.5” Min SH, 77.5” Daylight, 60” Max Stroke, 110mm Screw Diam-eter, FANUC M710i Robot w/ System RJ3 Controls (1999), SHINI SHD Hop-per Dryer (L16) MITSUBISHI 950-Ton Injection Mold-ing Machine, Model 950MGW-240, S/N G824212, New 1991, 240 oz, 7.5

Eject, 51.15” / 47.20”V Rod Space, 22” Min SH, 85.5” Daylight, 63.5” Max Stroke, 120mm Screw Diameter (L15) NISSEI 946-Ton Injection Mold-ing Machine, Model FV9200, S/N S92U007, New 2000, 168 oz, 8 Eject, 52.3” Rod Space, 19.7” Min SH, 42.3” Max SH, 108.7” Daylight, 89” Max Stroke, 112mm Screw Diameter, FANUC M710i Robot w/ System RJ3 Controls (L14) CINCINNATI 725-Ton Injection Mold-ing Machine, Model MH725-179, S/N H07A0400013, New 1999, 179 oz, 7.87 Eject, 37.4” Rod Space, 18.11” Min SH, 70.8” Daylight, 51.97” Max Stroke, 110mm Screw Diameter (L17) MITSUBISHI 610-Ton Injection Mold-ing Machine, Model 610MMJ-110, S/N MMG611287, New 2006, 110 oz, 5.9 Eject, 33.88” Rod Space, 15.75” Min SH, 31.5” Max SH, 62” Daylight, 47.24” Max Stroke, 90mm Screw Diameter (L12) HPM 700-Ton Injection Molding Machine, Model 700 MKII 100, S/N 87350, New 1988, 110 oz, 8 Eject, 36.5” Rod Space, 12” Min SH, 56” Daylight, 44” Max Stroke, 4” Screw Diameter (L11) VAN DORN 770-Ton Injection Mold-ing Machine, Model 700HP-LP, S/N 770HP123-0758, New 1996, 125 oz, 45”Hx36.5”V Rod Space, 14.5” Min SH, 58.5” Daylight, 44” Max Stroke, 110mm

(2) FANUC M710i Robots (11) FAST HEAT & PCS Hot Runners

(2) SHINISIC-12A(US)-RZ-P Chillers

(24+) AQUA THERM Temperature Control Units

(5) CST STORAGE & Other Silos

(2) THERMAL CARE TCW60 Chiller Pumps

(2) MARLEY Cooling Towers

SELCO Cardboard Baler HARRIS V5-HD-15 Baler

THERMAL CARE PT1300 Chiller Pump

LIMITED ON TIME? WE ACCEPT

PROXY BIDS.See back cover for details.

1 0F 11 1 0F 2

14 0F 24+

New As2012

Screw Diameter (L10) HPM 700-Ton Injection Molding Ma-chine, Model 700MKII 100, S/N 88218, New 1989, 110 oz, 8 Eject, 36.5” Rod Space, 12” Min SH, 56” Daylight, 44” Max Stroke, 4” Screw Diameter (L9) MITSUBISHI 500-Ton Injection Molding Machine, Model 500MJ, S/N 2G304282, New 1994, 52.2 oz, 5.5 Eject, 31.75” Rod Space, 14.5” Min SH, 53.5” Daylight, 39” Max Stroke, 70mm Screw Diameter (L8) CINCINNATI 400-Ton Injection Mold-ing Machine, Model VH-400-21CE, S/N 3904A21/89-32, New 1989, 29 oz, 5.5 Eject, 29” Rod Space, 8.5” Min SH, 42.5” Daylight, 34” Max Stroke, 65mm Screw Diameter (L3) NISSEI 397-Ton Injection Mold-ing Machine, Model FN7000, S/N S36R097, New 1997, 41 oz, 28.875” Rod Space, 13.8” Min SH, 51.5” Day-light, 80mm Screw Diameter (L13) MITSUBISHI 390-Ton Injection Molding Machine, Model 390MJ, S/N 2G406327, New 1994, 40 oz, 4.75 Eject, 28.75” Rod Space, 11.5” Min SH, 49.25” Daylight, 47.75” Max Stroke, 62mm Screw Diameter (L5) MITSUBISHI 320-Ton Injection Mold-ing Machine, Model 290MS3-30, S/N 3S29E069, New 1996, 28.6 oz, 8 Eject, 25.9” Rod Space, 11.8” Min SH, 41.7” Daylight, 29.9” Max Stroke, 57mm Screw Diameter (L4)

PLASTIC DRYERSUNA-DYN Dehumidifying Hopper Dryer, Model DHD-11, S/N 316487.10-0162, w/ (2) UNA-DYN PSC2000 HoppersBRY-AIR SYSTEMS Dryer, Model EZ-400, S/N 200310113807, w/ (2) HoppersUNA-DYN Dryer Vacuum Pump, Model 7.5HP, S/N 316233.15-0512, w/ (1) HopperDRI-AIR Dryer w/ (1) Hopper(7) DRI-AIR Dryers, Models HP4-X 750FM • HP4-X 300 • RD-100 • Arid-X150CON-AIR W200 & CON-AIR D100A 111 Dryers

PLASTIC SUPPORT EQUIPMENT

(5) FAST HEAT Pulse Hot Runners(6) PCS Hot Runners(2) SHINI SIC-12A(US)-RZ-P ChillerACCU CHILLER SQ2A1004 Chiller(24+) AQUA THERM Temperature Control Units(2) UNA-DYN Vacuum Pumps

PLASTICSTORAGE SILOS

(3) 2012 CST STORAGE Silos, 11.11’

Diameter, 47.4’ Height, 4,370 Cubic Feet Capacity, 14 oz/square inch Max Pressure, Funnel Flow(2) Storage Silos

COOLINGTOWERS / CHILLERS

(2) THERMAL CARE Cooling Towers,Model FC740, (1) 15-HP Motor/Tower, S/N 17682011205 & 17682012205, 22.5 Amps(2) MARLEY Cooling Towers(2) THERMAL CARE TCW60 Chiller Pumps, S/N 17675011205 & 17676011205THERMAL CARE PT1300 Chiller Pump, S/N 17677011206

CARDBOARD BALERSSELCO Cardboard BalerHARRIS V5-HD-15 BalerTEE MARK Baler

TOOLROOM EQUIPMENT

(2) BRIDGEPORT Vertical MillsGIDDINGS & LEWIS BICKFORD Radial Arm DrillHYDMECH P350 Chop SawFADAL VMC10 CNC Vertical Machin-ing Center, New 1995, (Out of Service)

CAMPBELL HAUSFIELD Air Com-pressor

ROLLING STOCK(8) 2015 HYSTER 5,000-lb. Forklifts,Model S50FT, LPG, Lever Shift Trans-mission, Solid Tires, 189” Raised / 83” Lowered 3-Stage Mast, SideshiftCATERPILLAR T125D Forklift, 12,500-lb. Capacity, LP, Cushion Tire, S/N 51300876, 5,333 HoursTENNANT 7400 LPG Floor Sweeper/ScrubberTENNANT 235 Ride-on Floor Sweeper, LP, 5,030 HoursTENNANT M20 Ride-on Floor Scrub-ber, LP, S/N M20-6239CROWN TSP Turret Stockpicker Forklift, Electric, S/N 1A245737

YARD EQUIPMENTCUB CADET XT3 Enduro Riding MowerCOOL DRIVE Pressure WasherCUB CADET BlowerYARD MACHINES Walk-behind MowerTROY BILT Zero Turn MowerYARD MACHINES Snow Blower(9) TROY BILT Generators

TRAILERSHAWKE T/A Dump TrailerT/A Utility Trailer

5

(2) BRIDGEPORT Vertical Mills HYDMECH P350 Chop Saw

HAWKE T/A Dump Trailer T/A Utility Trailer

CAMPBELL HAUSFIELDAir Compressor

TENNANT 235 Ride-on Floor Sweeper TENNANT M20 Ride-on Floor Scrubber

GIDDINGS & LEWIS BICKFORDRadial Arm Drill

CROWN TSP Turret Stockpicker Forklift

1 0F 2

CATERPILLAR T125D 12,500-lb. Forklift(8) HYSTER S50FT 5,000-lb. Forklifts

1 0F 8 2015

For Informationon Upcoming

Auctions

FOLLOW US ON

Register and be approved for the sale. Call our Office at 513-738-3311

and give us your proxy bid.We bid on your behalf, up to and including the maximum

amount you specify. Your purchase will be obtained atthe lowest bid possible. We will notify you of the selling

price if you’ve won the lot.

LIMITED ON TIME? WE ACCEPT PROXY BIDS.

FIRST CLASS MAILPRESORTED

FIRST CLASS MAIL U.S. POSTAGE

PAID CINCINNATI, OH

PERMIT NO. 5714

DIE CASTING AND PLASTIC INJECTION MOLDING FACILITY

(8) HPM, IDRA & CAST MASTER 1,000-Ton to 600-TonHorizontal Die Casting Machines

(17) CINCINNATI, TOSHIBA, HUSKY, NISSEI, MITSUBISHI, HPM & VAN DORN 2,450-Ton to 400-Ton Plastic Injection Molding Machines

TERMS OF SALE: Copies of Terms of Sale will be posted at the reserve auction. Additional terms may be an-nounced during the auction. We make every effort to accurately describe each item in the auction; however, a mistake may occur. Buyers must take responsibility to thoroughly inspect the items on which they intend to bid. Each item will be sold “As is, where is.” There is absolutely no warranty or guarantee of any kind either written or implied. Occasionally, additional information may come to light regarding any and all items being sold during the auction. When this occurs the new information takes precedence.

REMOVAL & PAYMENT: Machinery removal is the responsibility of the buyer. All equipment must be removed in accordance with the specific auction timeline and terms of sale. See the specific auction web page for details. Anyone (rigger or buyer), using a powered vehicle to remove items must have a certificate of insurance on file with Myron Bowling Auctioneers in the amount of $1,000,000.00. Item removal generally begins at the conclusion of the auction and after payment in full is received by cash, wire transfer, or company check (if approved by the auction company or bank letter of guarantee). All checks should be made payable to Myron Bowling Auctioneers. Taxes will be charged unless you have provided a proper written exemption from your state. SAMPLE BANK LETTER: Dear Sirs, (BANK NAME) irrevocably guarantees payment in full to Myron Bowling Auctioneers by (BUSINESS NAME) drawn on account (NUMBER) up to the amount of $ (DOLLARS) to purchase items at your (AUCTION NAME). This letter of guarantee is valid until (MONTH, DAY, YEAR). Regards, (BANK REPRESENTATIVE, TITLE, BANK NAME).

COMPLETE TERMS & CONDITIONScan be found at myronbowling.com, or call 513/738-3311 if you have questions

TERMS & CONDITIONS

AUCTION LICENSE NUMBERS: Myron C. Bowling, Principal Auctioneer - Lic. #255705

Auction conducted by:MYRON BOWLING AUCTIONEERS, INC.P. O. Box 369, Ross, Ohio 45061

Plant Closed

MODERN TRANSMISSION DEVELOPMENT (MTD)

2555 Brandenburg Road in Leitchfield, Kentucky

WEBCAST ONLY - NO ONSITE BIDDING

FRIDAY, JUNE 19THStarting at 10AM ET

Inspection: Day Prior to Auction From 9AM-4PM

Bid Online in Real Time at WEBCAST AUCTION

(7) FANUC Extraction Robots HARRISV5-HD-15 Baler

HAWKE T/A Dump Trailer

(14) UNA-DYN, BRY-AIR, DRI-AIR,CON-AIR & SHINI Hopper Dryers & Dryers

Register: You must register as an online bidder through Bidspotter.com, 24 hours prior to the auction start time to allow sufficient time to be approved. You’ll find the Bidspotter link on the specific auction page on our Website.Deposit: A deposit of 25% of your anticipated purchase or a bank letter of guarantee is required to bid online. Mail deposit check to: Myron Bowling Auctioneers, P.O. Box 369, Ross, Ohio 45061. Call 513/738-3311 for wire instructions. Fax your bank letter of guarantee to 513/738-0221.Approval: Once the registration process has been completed and your deposit received, you will be notified through an automated Bidspotter email, that you are approved to bid.

ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYER’S PREMIUM

BUYER’S PREMIUM: 18% ONLINE w/bidspotter.comINSPECTION: THE DAY BEFORE THE AUCTION FROM 9AM TO 4PM

Myron Bowling513/604-4957

Joe Oliver513/604-4958

Kevin Gamm 513/235-6430

Greg Hengehold513/520-7636

Christopher Lee513/720-1687

Tom Bowling513/738-3311

Thinking about having an auction? Call one of us.

P.O. Box 369 I Ross, Ohio 45061Phone: 513/738-3311 I Fax: 513/738-0221www.myronbowling.com

105 Revere Drive, Suite C I Northbrook, IL 60062Phone: 224/927-5320 I Fax: 224/927-5311www.pplauctions.com

1 0F 8 1 0F 17

2,450-Ton to 400-Ton1,000-Ton to 600-Ton

1 0F 14