737ng manual afds module afd1075
DESCRIPTION
Flyengravity wiring diagramTRANSCRIPT
AFD1075Autopilot Flight Director System
AFDS
Congratulations on your purchase of the FLYENGRAVITY AFDS module.
We advice to carefully read the instructions prior to making any connections. The AFDS module is designed for the MIP desktop series and MIP Pro.
NOTE: Please read the CP-Flight MIP737 Manual before proceed to connect the wiring !
Wiring diagram
Electronic parts are sensitive devices,always make sure what you do whenconnecting and use the proper tools.In case of doubt, please contact our
support department at [email protected]
The AFD1075 is designed to be used with the CP flight MIP board.
FLYENGRAVITY
+12V
0V
0V
CO
M
CO
M
UP
DW
N
FM
C
BL
+
BL
-
A/P
A/T
FM
C
PUSHLEDTEST
R AA/P
R AA/T
www.engravity.com
Switch input 25 and 79
Switch input 24 and 78
Switch input 13 (Cap+Copilot)
Switch input 14 (Cap+Copilot)
Switch input 15 (Cap+Copilot)
Switch input 16 (Cap+Copilot)
Switch input 26 and 80
LED output 13 and 43
LED output 15 and 45
LED output 14 and 44
LED output 17 and 47
LED output 16 and 46
LED Common 11 and 41
Ground 12V (backlight)
Ground 12V
to positive 12V (backlight)
To positive 12V
© Engravity BV 2009
The numbers mentioned belowrefer to the terminals on the MIP board.Always check the manual first