67 control software

8/19/2019 67 Control Software

1/22494 PHOENIX CONTACT


2/22

Product overview 496

ProgrammingPC Worx EXPRESS/PC Worx 499

Function blocks/libraries 501 nanoNavigator 502

VisualizationWebVisit 503 Visu+ 505

Drivers and interfacesOPC/ODP server 506

Configuration, monitoring, diagnosticsConfig+ 509 Diag+ 511

Device parameterizationStartup+ 512 AutomationXplorer+ 513

Planning and configurationProject+ 514

Remote controlPortico 515 Resy+ 501

495PHOENIX CONTACT

Software is the key to more efficient au-tomation. Phoenix Contact offers softwarefrom configuration to system operation –intelligent solutions that guide you throughevery stage of the value added chain of your

automation solution. All products interactperfectly and impress with their innovativefunctions and intuitive, user-friendly opera-tion. In addition, a wide range of ready-to-use block libraries is also available.

ProgrammingSoftware products for programming, from

clear tasks with compact controllers tocomplex system automation with high-endPLCs.

VisualizationIntelligent tools for designing operation

and monitoring interfaces – in the controlroom or directly in the machine.Drivers and interfaces

Everything you need to connect addition-al systems to your automation solution.

Configuration, monitoring, diagnos-tics

Software tools for fast startup, constantmonitoring, and reliable diagnostics.

Planning and configurationExpert support with the planning and

configuration of technical components. Sothat everything works together perfectly.

Remote controlFlexible solutions for controlling distrib-

uted automation units.

Device parameterizationCentral and efficient – parameterize your

field devices from the comfort of your PC.

System simulationStartup and testing made easy – in a com-

pletely virtual environment.

Marking softwareSoftware tools for efficient marking –

even in series production.

Software


3/22

Programming

PC Worx Steeplechase VLC Function blocks nanoNavigator SAFETYPROG

Type PC Worx … VLC- … -P/USB … NLC-NAV-... SAFETYPROG …

Description Software package forPhoenix Contact controllers

programmed according to IEC 61131

Development environment withflowchart programming

and hardware key

Function and industry-specificsoftware and drivers

Programming software forthe Nanoline product range

Programming software forINTERBUS-Safety systems and

PROFIsafe controllers

See section:Functional safety

Page 499 www.phoenixcontact.net/products 501 502 111

Visualization Drivers and interfaces

WebVisit Visu+ OPC server ODP server SNMP OPC ...

Type WEBVISIT … VISU+ 2 … … OPC SERVER AX ODP SERVER … FU FL SNMP OPC SERVER V3

FL SNMP OPC AGENT V3Description Development software for

web-based visualizationsSCADA visualization,

development and runtime licensesCommunication interface for

OPC-compatible visualizationsODP communication interface for

OPC-compatible visualizationsMonitoring/configuration ofSNMP-compatible devices inHMI and SCADA systems /

integration of OPC-based solutions inmanagement systems

Page 503 505 506 507 507

Configuration, monitoring, diagnostics

Config+ Diag+ Diag+ NetScan FL VIEW

Type CONFIG+ … DIAG+ … DIAG+ NETSCAN … FL VIEW

Description Tool for fieldbus andnetwork configuration

Diagnostics software forINTERBUS, PROFINET,and Ethernet networks

Diagnostics software forcyclic INTERBUS diagnostics

Network diagnostics software

See section:Ethernet networks

Page 509 511 511 44

496 PHOENIX CONTACT

SoftwareProduct overview


4/22For additional information, visit www.phoenixcontact.net/products

Device parameterization

Startup+ AutomationXplorer+ SAFECONF MGUARD DM

Type STARTUP+ AX+ BASIC FL MGUARD DM …

Description Software forstarting up and parameterizing

Axioline I/O stations

FDT application fordevice parameterization

Configuration software forSafetyBridge modules

See section:Functional safety

Central management softwarefor FL MGUARD devices

See section:Ethernet networks

Page 512 513 110 45

Planning and configuration Marking

Project+ FL WST BASIC CLIP PROJECT

Type PROJECT+ FL WST BASIC CLIP PROJECT …

Description Software for planning theI/O configuration

Simulation software forplanning wireless systems in

industrial environments

See section: industrialcommunication technology

See Catalog 3,

Section:Marking

Page 514 59

Remote control System simulation

Portico Resy+ Software Hardware

Type VL PORTICO SERVER … RESY+ ... WINMOD AX … IB EMULATOR

Description Remote cont rol of ne tworked IPCs Funct ion b locks fo rextending standard controland I/O components withremote control protocols

WinMOD system softwareincluding INTERBUS/PROFINET IO

simulation software

Required in order to simulateINTERBUS configurations with the

WinMOD software

Page 515 501 www.phoenixcontact.net/products

497PHOENIX CONTACT

SoftwareProduct overview



SoftwareProgramming

In order to test the program code, thereis a powerful simulation tool for all INTEL ®-compatible controllers. This shortens thestartup times of the real system.

All data configured in PC Worx can beeasily reused for visualization purposes viastandard interfaces such as the AX OPCserver or an integrated web server. TheOPC and web server variables are selectedby clicking with the mouse.

Worldwide use assuredYou can switch between numerous lan-

guages in the interface. Program commentscan be exported and imported for transla-tion. You can therefore save projects to-gether with their comments in various lan-guages.

Integrated password handling supportsvarious protection models, such as savingthe project, protecting individual POUs(program organization units) against writeor read access (expertise protection) or dis-abling actions such as controller start/stop.

I/O configurationNetwork structures such as PROFINET,

INTERBUS, PROFIBUS, and Modbus/TCPcan be configured in PC Worx via an inte-grated bus configurator. A device cataloglists all components in clear groupings ; thecomponents can be applied in the hardwareconfiguration using drag & drop.

In connection view, the program variablesare connected to the inputs and outputs ofthe network components. The variables areaddressed automatically.

DiagnosticsThe integrated Diag+ diagnostics tool is

used to handle the diagnostics of all systemcomponents in the INTERBUS andPROFINET network. This tool enables pre-cise error localization in the entire system.

Preventive diagnostic functions such asmonitoring the transmission quality of fiberoptic paths in INTERBUS systems increasesystem availability. Diagnostic data, causes

of malfunctions, and solutions are displayeddirectly in plain text.

Programming environment for con-troller class 100

With PC Worx EXPRESS,Phoenix Contact provides a free engineer-ing tool that can be used to easily programclass 100 compact controllers. This isachieved, for example, thanks to an evenclearer user interface.

PC WORX EXPRESS offers numerousproven functions such as project creation,fast application development, plus easy

download, monitoring, and startup of thePLC program. Intelligent automated func-tions such as the automatic insertion ofprogram instances in the task or simplifiedvariable handling speed up programming.

PC WORX EXPRESS can be downloadedfree of charge:

www.phoenixcontact.net/products

If the application requires the advancedfunctions of PC Worx, the project createdwith PC WORX EXPRESS can be openedwith the standard programming environ-ment in order to transfer the created datato PC Worx - as a result no data is lost.

Programming with PC WorxPC Worx is the consistent engineering

software for all controllers from PhoenixContact. It combines programming accord-ing to IEC 61131, fieldbus configuration,

and system diagnostics – in a single softwaresolution. This provides optimum interactionbetween hardware and software.

The PC Worx engineering tool can beused in all areas of industry. From the outsetthe software has been developed and opti-mized as a uniform and user-friendly engi-neering environment for all controller class-es.

The software includes all the program-ming languages defined in IEC 61131-3:

– Instruction List (IL) – Function Block Diagram (FBD) – Ladder Diagram (LD) – Sequential Function Chart (SFC) – Structured text (ST)

Efficient programmingThe PC Worx interface can be custom-

ized to your individual requirements withclearly arranged workspaces and toolbars.The basic languages of IEC 61131 (LD, FBD,and IL) can be directly and freely cross com-piled. Structured text can be converted intoany of the three basic languages.

All editors use assistants, which supportand monitor the addition of data types,function blocks, operators, and variable

declarations for quicker and more user-friendly editing. For text editors, anotherassistant is available for keywords and theircommand structures.

Startup and maintenanceDuring controller operation, the follow-

ing functions round off IEC 61131 program-ming:

– Cross-references for editing – Online and offline program comparison

by all IEC editors and configuration data – Startup functions – Debug functions such as:

- Logic analysis in realtime- Breakpoints- Address debugging- Step-by-step mode- Overwriting and forcing of variables

PC Worx and PC WORX EXPRESS



Technical data Technical dataHardware requirementsCPU Pentium 4/Celeron 1.6 GHz, minimum Pentium 4/Celeron 1.6 GHz, minimumMain memory (RAM) min. 1 Gbyte (2 Gbyte for Windows Vista and Windows 7) min. 1 Gbyte (2 Gbyte for Windows Vista and Windows 7)

Hard disk memory min. 2 Gbyte min. 2 Gbyte

Optical drive DVD-ROM DVD-ROMOperating equipment Keyboard, mouse Keyboard, mouseMonitor resolution XGA (1024 x 768) XGA (1024 x 768)Software requirementsOperating systems MS Windows XP SP3, MS Windows Vista Business SP2,

MS Windows 7 Professional (32/64-bit) SP1MS Windows XP SP3, MS Windows Vista Business SP2,MS Windows 7 Professional (32/64-bit) SP1

Supported browsers Internet Explorer Version 7 or later Internet Explorer Version 7 or laterBasic functions

Configuring an automation system, parameterizing INTERBUS de-vices, operating INTERBUS, programming an automation systemaccording to IEC 61131-3, communication according to IEC 61131-5

Planning an automation system, parameterizing the INTERBUS andPROFINET devices, operating INTERBUS and PROFINET, pro-gramming an automation system in a cc. with IEC 61131-3. commu-nication in acc. with IEC 61131-5

IEC 61131 includes the following programming languages:- Function block diagram (FBD),- Ladder diagram (LD),- Structured text (ST)

IEC 61131 includes the following programming languages:-Instruction list (IL), -Function block diagram (FBD),-Ladder diagram (LD), -Structured text (ST),-Symbolic flowchart (SFC)

Network configura tion (funct ional ity o f Conf ig+) Add-on to IEC 61131: F ixed Format Ladder Editor (FFLD) and Ma-chine Sequential Function Chart language MSFC (from the licensePC Worx PRO LIC onwards)

Network diagnostics (functionalit y of Dia g+) Network configura tion (f unct ionality of Config+ )

- Network diagnostics (functionality of Diag+)128 kbytes of I/O data (mixed) 128 kbytes of I/O data (mixed) (full license)

Languages supported German, English, French, I talian, Spanish, Chinese German, English, French, Ital ian, Spanish, Chinese

Ordering data Ordering data

Description Type Order No. Pcs. /Pkt. Type Order No.Pcs. /Pkt.

Free programming version without license mechanism for con-troller class 100 , 128 Kbyte I/O data

PC Worx EXPRESS 2988670 1Demo software with Quick Start Guide , 16 byte input/output

data, Diag+ limited to 5 devices

PC Worx DEMO 2985725 1Basic license with 256 byte input/output data, without MSFC com-piler

PC Worx BASIC LIC 2985275 1Full license with 128 Kbyte input/output data, with MSFC com-piler included

PC Worx PRO LIC 2985385 1Low-cost upgrade of existing basic license to a full license

PC Worx BASIC-PRO LIC 2985259 1

499PHOENIX CONTACT

SoftwareProgramming

Free programming environmentfor the 100 series controller class

Software package forPhoenix Contact controllers

programmed as per IEC 61131


7/22

Function blocks from Phoenix Contactcan be used to integrate functions such asenergy measurement or motor manage-ment quickly and easily in your system andso transform them into a fully-fledged part

of your control system.Block libraries – useful grouping offunctions

Our function blocks are grouped bytheme as libraries, e.g., for PC Worx andSTEP 7, which are optimally tailored to therelevant development environment. Freeblocks for parameterization, monitoring,and signal conditioning are available for con-necting analog and digital I/O terminals.Blocks for function terminals contain con-trol functions and communication options.

Technology blocks offer functions such asdatabase access, network monitoring orready-made applications for embedding thecontroller in its surroundings. Some ofthese blocks require a paid license, such asAPPLIC A or PDPI, on the controller wherethe memory cards are located. All functionblocks that require a license can also beused unrestricted for six hours without a li-cense.

Your advantages: – High quality for every application, thanks

to documented and tested program parts – Fast startup of I/O components and er-

ror-free configuration, thanks to speciallyadapted blocks

– Ready-made function blocks reduce pro-gramming effort and help prevent pro-gramming errors

– Function blocks even for complex applica-tions such as controllers

– Unlimited communication, as networkprotocols can be accessed from the con-trol program

– Easy infrastructure integration – Maximum safety, thanks to the support

and ongoing development of products byPhoenix Contact

Memory cards with and withoutlicense

Memory cards are used to configure theparameterization memory of controllers.You can choose between 512 MB or 2 GB

for SD cards or between 256 MB and 2 GBfor CF cards.Furthermore, memory cards are also

available in versions that come with a li-cense ; these are indicated with the exten-sion APPLIC A, PDPI BASIC or PDPI PRO.For blocks that require a license, use mem-ory cards with the extension APPLIC A.

Control technologyThe ControlTechnology library con-

tains free function blocks and functionblocks that require a license for controltechnology. For an overview of how to usethe blocks, please refer to the documenta-tion included in the library.

Network protocolsThe blocks in the IT library support con-

ventional protocols from the IT world. Youcan therefore integrate controllers into theIT environment for production and ensureconsistent communication from field levelto control level.

In addition, the library contains ready-made function blocks for the following pro-tocols – as a client function:

– FTP (File Transfer Protocol) – Dynamic Host Control Protocol (DHCP) – Domain Name Service (DNS) – Simple Network Time Protocol (SNTP) – Simple Mail Transfer Protocol (SMTP)

IT securityThe IT-Security library contains univer-

sal function blocks for protecting your data – when stored in a file system or while beingtransmitted in the network.

The integrity of data, i.e., the detection ofcorrupted data, can be ensured directlyfrom the application thanks to the SecureHash Algorithm (SHA). With the Keyed-Hash Message Authentication Code(HMAC) extension, SHA can also be usedto authenticate your data.

In addition, you can protect data from be-ing read without authorization using en-cryption methods such as the Advanced En-cryption Standard (AES).

Network managementHere you'll find function blocks for all as-

pects of the Simple Network ManagementProtocol (SNMP). The SNMP library en-ables you to link your controllers to net-work management even deeper with SNMPVersion v2c.

– The SNMP Agent block can be used toprovide access to diagnostic messages,process values or control parametersfrom the control environment.

– The SNMP Client block enables accessto the network components from thecontrol program ; the controller cantherefore request the status of a deviceor even change parameters.

– The Trap Sender block enables the con-troller to send event messages.

– To receive messages, use the Trap Re-ceiver block.The SNMP Agent, Trap Sender, and Trap

Receiver blocks are also available for proto-col Version 3. This means that you can alsomeet increased security requirements byauthenticating or encrypting the user datathat is to be transmitted.

DatabasesThe SQL block library enables you to

transfer data directly from the controller toan MS SQL or MySQL database. With theaid of function blocks a database connectionis established from the control program.

The integrated user management of the da-tabase governs the assignment of accessrights.The application program uses standardizedSQL commands to write to database tablesdirectly or to query the database.

CAN busThe CAN-Technology library contains

function blocks for CAN bus. You cantherefore integrate the IB IL CAN-MA In-line terminal in your control program.

In the library you have direct access to themessages of the serial fieldbus. In addition,

ready-made blocks are available for higher-level application protocols such as CANo-pen®, J1939 or NMEA 2000.

500 PHOENIX CONTACT

Function blocks/libraries

SoftwareProgramming



Ordering data

Description Type Order No. Pcs. /Pkt.

Parameterization memory , Flash card without license

- 2 GB SD FLASH 2GB 2988162 1- 2 GB CF FLASH 2GB 2701185 1- 512 MB SD FLASH 512MB 2988146 1- 256 MB CF FLASH 256MB 2988780 1Function block libraries for IT applications ,for MS SQL/MY SQL communication and for PID controllers,Flash card with license for activation

- 2 GB, with license code SD FLASH 2GB APPLIC A 2701190 1- 2 GB CF FLASH 2GB APPLIC A 2701189 1- 512 MB, with license code SD FLASH 512MB APPLIC A 2701799 1- 256 MB CF FLASH 256MB APPLIC A 2988793 1Controller function blocks with self-optimization for tempera-ture control, Flash card with license for activation

- 512 MB SD FLASH 512MB PDPI BASIC 2701800 1- 256 MB CF FLASH 256MB PDPI BASIC 2700549 1Controller function blocks with self-optimization , extendedwith special functions for process automation,

Flash card with license for activation

- 512 MB SD FLASH 512MB PDPI PRO 2701801 1- 256 MB CF FLASH 256MB PDPI PRO 2700550 1License key function block library for remote control technology

RESY-DATA-A LIC 2876847 1

501PHOENIX CONTACT

Resy+ softwareWith the Resy+ remote control libraries

from Phoenix Contact you can monitor andcontrol system parts that are in separate lo-cations, such as pumping stations or elevat-

ed tanks. You are therefore kept informedof all the generic measured values of yourexternal stations at any given time.

The libraries contain preprogrammed ex-amples which can be used directly. Other-wise you can combine ready-made blocks tocreate your own solution. Thanks to specialremote control protocols such as ODP,IEC 60870-5-101 and -104, the controlcommands are sent directly from a centralcontrol room and process data is transmit-ted securely over wide area networks.

You can therefore design modern and ef-ficient remote control technology: simplycombine the Resy+ remote control soft-ware with our automation components.

Your advantages: – Secure, event-oriented, and inexpensive

monitoring of all distributed plants viaEthernet as well as via serial interfaces

– Standardized protocols – for integratingyour remote control station into existingnetworks

– Versatile – data transmission via Ethernet,wireless technology, GSM,GPRS/EDGE/3G, and Industrial Wireless

– Highly modular – the stations can be cre-

ated flexibly and you can combine varioustransmission paths, i.e., optimum adapta-tion

Controller function blocks with self-optimization: PDPI BASIC or PDPIPRO

Blocks for applications in controltechnology are grouped together in thePDPI-BASIC and PDPI-PRO libraries.

– Automatic identification of control pa-rameters

– Control for binary, motor step, and con-tinuous actuators

– Special functions for numerous areas ofapplication, such as startup circuit, heat-ing channel control or water coolingThe block for the self-tuning controller

for temperature control requires the PDPIBasic license:

The block for the self-tuning controllerfor special functions in process automationrequires the PDPI Pro license.

SoftwareProgramming

CF and SD memory cardwith function block licenses


9/22

Technical dataHardware requirementsCPU Pentium > 400 MHzMain memory (RAM) 512 Mbyte (1 GB for Windows Vista)Hard disk memory 128 MbyteOptical drive CD-ROM

Interfaces COM port or USB portOperating equipment Keyboard, mouseMonitor resolution SVGA (800 x 600)Software requirementsOperating systems MS Windows 2000, Windows XP, Windows Vista (32- and 64-bit),

Windows 7 (32- and 64-bit)Basic functions

Programming with flowchartsProgramming with ladder diagramProject configurationProject simulationExecution monitoring

Languages supported German, English, French, Spanish, Italian

Ordering data

Description Type Order No. Pcs. /

Pkt.Programming software

NLC-NAV-01 2701221 1

502 PHOENIX CONTACT

The nanoNavigator software is the idealsolution for all setup, programming, and

maintenance tasks relating to the Nanolineprogrammable logic module and can bedownloaded free of charge.

Connect your PC to the programmablelogic module via one of the serial connec-tions. It takes just four steps to create acontrol program with the software, whichyou can also start and stop from the PC. Atthe same time, you can monitor the prog-ress of the program and data such as inputs,outputs, registers, flags or timers in onlinemode.

The programming languages offered bythe software include flowchart and ladderdiagram, which is used in electrical engi-neering in particular. In general, develop-ment tasks can be performed quickly withthe nanoNavigator software, as you can alsomodify data elements and monitor their ex-ecution from the PC, and you also have theoption of simulating the application.

nanoNavigator can be used intuitively andwithout detailed prior knowledge. Togetherwith the Nanoline programmable logicmodule, the system represents a user-friendly and cost-effective solution for edit-ing clear control tasks efficiently.

nanoNavigator

SoftwareProgramming

Software for programming andmaintenance tasks relating to the

Nanoline programmable logic module



Technical dataHardware requirementsCPU Pentium 4/Celeron 1.6 GHz, minimumMain memory (RAM) min. 1 Gbyte (2 GB for Windows Vista and Windows 7)

Hard disk memory min. 2 Gbyte

Optical drive DVD-ROMOperating equipment Keyboard, mouseMonitor resolution XGA (1024 x 768)Software requirementsOperating systems MS Windows XP SP3, MS Windows Vista Business SP2,

MS Windows 7 Professional (32/64-bit) SP1Supported browsers Internet Explorer Version 7 or laterBasic functions

WebVisit is the engineering tool used to create web visualizationsfor all controllers with integrated web server.

The user interface has a functional design and even the basic ver-sion offers numerous graphic basic elements and functions.

The Pro version includes functions such as alarm lists, trends, a sim-ple user management feature, URL jumps, and other popular func-tions.WebVisit enables you to create suitable user interfaces for your ap-plication quickly and easily.

Languages supported English

Ordering data


Development software for web-based visualizations WEBVISIT 6 BASIC 2700948 1

WebVisit , development software for web-based visualisations,with alarming, trending and language selection

WEBVISIT 6 PRO 2700949 1

WebVisit , free development software for up to three web-basedvisualization pages

WEBVISIT 6 EXPRESS 2700954 1

AccessoriesUpgrade license for upgrading from WEBVISIT 6 BASIC to WEB-VISIT 6 PRO

WEBVISIT 6 BASIC-PRO 2700950 1

503PHOENIX CONTACT

You can now also benefit from the advan-tages of web-based visualization when con-trolling your automation systems. Visualizeyour networks, devices or processes withWebVisit – the inexpensive engineering tool

from Phoenix Contact. With intuitive oper-ation and without programming effort, youcan create graphical interfaces for clear andstraightforward work.

All Phoenix Contact controllers offer anintegrated web server which forwards con-trol data. Use this data and design visualiza-tion pages for your system using WebVisit.The big advantage for you is that WebVisitis a graphical editor – i.e., you do not needany Java or HTML programming knowledge.

WebVisit visualization pages can be dis-played in any standard browser and on all ofour web panels with integrated runtime en-vironment. When you use WebVisit youonly pay for the engineering once and createany number of pages.

WebVisit

SoftwareVisualization

Development softwarefor web-based visualizations


11/22

Visu+ is the visualization software withSCADA functionality for computer-aidedcontrol and monitoring of technical pro-cesses. Visu+ is suitable for any application:from a compact HMI device to an industrialPC.

Your advantages: – Operation and monitoring of systems and

machines – Thanks to the central monitoring of a sys-

tem, previously used indicators such as

switches or signaling devices can be elim-inated. – Trending: e.g., for plotting curves with

measured data – Alarming: monitoring process values for

permissible and impermissible states, andnotification via modem or web link, plusSMS, voice, and fax messages

– Data logging: recording data in a databasefor later analysis or graphical representa-tion

– User management: assignment and re-striction of user rights

– Reporting: analysis of collected data andrepresentation of data in the form of a re-port

– Optional web clients provide access tooperational data via the Internet or In-tranet

Visualization projects created with Visu+can be used on all PCs with Windows oper-ating systems as well as on Windows CE-based HMI devices from the TP and OTranges. A runtime license is required forWindows 2000/XP/Vista.

LicensesAn engineering license is required in or-

der to use Visu+. This license can be used tocreate projects for both HMI devices andPCs. A demo license is available for the ini-tial steps. Unlike the PC runtime licenses,the runtime licenses for HMI devices arefunctionally restricted by Windows CE.

The runtime licenses for PCs (Windows)can be ordered individually. Two basic ver-sions are available, Visu+ RT and Vi-su+ RT D, where the number of I/O bytescan be selected in stages or as an unlimitedoption. These basic licenses can be extend-ed individually with options such as net-working, web clients or redundancy.

In addition to the OPC interface, theVisu+ RT-D licenses feature a direct driverconnection to certain controllers, e.g., Sie-mens S7.

Phoenix Contact HMI devices alreadyhave a runtime license for Visu+. The visual-ization images are vector-based and storedin XML format. During runtime, only the file

that is currently being displayed is disabled,all other screen pages can be replaced dur-ing project runtime. This means that in mostcases, changes can be made to the projectonline.

Due to its Unicode capability, Visu+ canalso display foreign character sets, such asAsian fonts. Machines that are designed forworldwide export, for example, benefitfrom this feature. Similarly, in multilingualprojects, languages can be switched online.

Scripting similar to VBA (Visual Basic forApplications) is available for individual ad-

justments. Another version of scripting sup-ports creation of a PLC-like instruction list(IL).

Visu+ options:Combine options freely with a runtime li-

cense. Order numbers for your combina-tion are available on request.

Visu+ 2 alarm statistics – For statistical evaluations of alarms and

their reports (reporting)

Visu+ 2 OPC server – Operates as an OPC DA server or OPC

XML DA server to connect OPC DA cli-ents such as MES systems

Visu+ 2 redundancy – For parallel operation on two PCs in or-

der to enable continued operation in theevent that one PC fails

– A license with redundancy function is re-quired for each PC

Visu+ 2 alarm dispatcher – For alarm distribution on various systems

such as SMS, voice message, fax, modemor e-mail

Visu+ 2 networking – For data exchange between multiple Vi-

su+ runtime systemsVisu+ 2 web client xx

– For using the Visu+ runtime as the serverfor the selected number of clients

– xx = number of web clients:1, 2, 3, 4, 5, 10, 15, 20 up to a maximumof 64 web clients supported

504 PHOENIX CONTACT

Visu+




Technical data Technical dataHardware requirementsCPU Pentium/Celeron, 1.6 GHz Pentium/Celeron, 1.6 GHzMain memory (RAM) min. 1 Gbyte (2 GB for Windows Vista and Windows 7) min. 1 Gbyte (2 GB for Windows Vista and Windows 7)

Hard disk memory min. 1 Gbyte (recommended: 2 GB) min. 1 Gbyte (recommended: 2 GB)

Optical drive DVD-ROM DVD-ROMOperating equipment Keyboard, mouse Keyboard, mouseMonitor resolution XGA (1024 x 768) XGA (1024 x 768)Software requirementsOperating systems MS Windows XP SP3, MS Windows Vista Business SP2,


Supported browsers Internet Explorer 5.5 or higher Internet Explorer 5.5 or higherBasic functions

Full SCADA (Supervisory Control And Data Acquisition) f unctional-ity with visualization, trending, and alarm management

Full SCADA (Supervisory Control And Data Acquisition) f unctional-ity with visualization, trending, and alarm management

Multilingualism of software and projects (incl. Unicode support andonline toggling)

Multilingualism of software and projects (incl. Unicode support andonline toggling)

Know-How protection and safety through coding of projects Know-How protection and safety through coding of projects

Control coupling with OPC Control coupling with OPC and 2 direct drivers

Access protection with user management Access protection with user managementFully scalable process diagrams for using one design on differentdevices and monitor sizes

Fully scalable process diagrams for using one design on differentdevices and monitor sizes

Realtime database coupling with ODBC to MS ACCESS, MS EX-CEL, and SQL server

Realtime database coupling with ODBC to MS ACCESS, MS EX-CEL, and SQL server

Automatic data record ing and recipe management Automat ic data record ing and rec ipe management

Scripts can be created in VBA and IL Scripts can be created in VBA and ILFDA CFR 21 Part 11 compatible FDA CFR 21 Part 11 compatible

OptionsStatistical alarm function Statistical alarm functionWeb client capability Web client capabilityRedundancy function Redundancy functionAdvanced alarm management with SMS, FAX, e-mail and voicemail function

Advanced alarm management with SMS, FAX, e-mail and voicemail function

Networking NetworkingLanguages supported German, English, French, Italian German, English, French, Italian



Development license for Visu+ projectsVISU+ 2 2988544 1

Runtime license for Visu+ , where the I/O data and variables inscripting are limited- Limited to 64 bytes VISU+ 2 RT 64 2988683 1 VISU+ 2 RT-D 64 2988751 1- Limited to 128 bytes VISU+ 2 RT 128 2988586 1 VISU+ 2 RT-D 128 2988696 1- Limited to 256 bytes VISU+ 2 RT 256 2988609 1 VISU+ 2 RT-D 256 2988719 1- Limited to 512 bytes VISU+ 2 RT 512 2988612 1 VISU+ 2 RT-D 512 2988722 1- Limited to 1024 bytes VISU+ 2 RT 1024 2988641 1 VISU+ 2 RT-D 1024 2988735 1- Limited to 2048 bytes VISU+ 2 RT 2048 2988528 1 VISU+ 2 RT-D 2048 2988764 1- Limited to 4096 bytes VISU+ 2 RT 4096 2988531 1 VISU+ 2 RT-D 4096 2988913 1- Limited to 8192 bytes VISU+ 2 RT 8192 2988557 1 VISU+ 2 RT-D 8192 2988573 1Runtime license for Visu+ , without limitation for I/O data and vari-ables in scripting

VISU+ 2 RT UNLIMITED 2988654 1 VISU+ 2 RT-D UNLIMITED 2988748 1Runtime license for Visu+ , including networking function wherethe I/O data and variables in scripting are limited

- Limited to 2048 bytes VISU+ 2 RT 2048 NETWORKING 2701143 1 VISU+2 RT-D 2048 NETWORK 2701670 1

505PHOENIX CONTACT


Development and runtime licenses for Visu+(without drivers)

Runtime licenses for Visu+with 2 direct drivers

Notes:

Further licenses can be found on the Internet at www.phoenixcon-tact.net/products.

1) Note:Unlike version 1.xx, Visu+ 2 ... XT... products now no longer offera web client function ; this can be purchased optionally.



OPC/ODP server

Implement data exchange quickly and re-liably between the following devices usingOPC servers:

– PC Worx programmable controllers andOPC-compatible devices

– SNMP-compatible devicesYour advantages:

– Flexible integration in numerous higher-level systems, thanks to open, standard-ized interfaces such as OPC or SNMP

– Fast parameterization of signals in theproject only needs to be carried out once:the AX OPC server is configured auto-matically

– User-friendly communication with I/O de-vices from a high-level language applica-tion, thanks to the HFI driver interfaceUsing this Windows ®-based, globally

standardized technology, control hardwareand visualization software can be easilycombined, without the need for specialdrivers. Visualization software can thereforeread or write data from a PLC without pro-gramming and represent this graphically.

AX OPC SERVERThe OPC interface is used for data ex-

change and offers a manufacturer-neutralway of connecting visualizations to the con-trol technology.

AX ODP SERVERThe ODP (Open Data Port) server en-

ables you to communicate openly with yourPhoenix Contact controllers via Ethernet,DSL or GPRS.

SNMP OPC server V3SNMP OPC servers gather device and

network information, which can be read viaSNMP. In this way, you can integrate yourSNMP-compatible devices in OPC-basedprocess control systems (SCADA) or inHMI systems.

SNMP OPC agent V3The SNMP OPC agent enables seamless

vertical integration. This means that OPC-based automation systems can be integrat-ed into existing SNMP management struc-tures. You can therefore monitor the oper-ating states of Ethernet components withthe central management system, for exam-ple.



Optical drive DVD-ROMOperating equipment Keyboard, mouseSupported interface connections Embedded Controller (INTERBUS controller boards are supported

only by the IBS OPC SERVER.)

Software requirementsOperating systems MS Windows XP SP3, MS Windows Vista Business SP2,

MS Windows 7 Professional (32/64-bit) SP1Basic functions

Supports OPC standard functions and all the optional interfaces (inaccordance with OPC spec. DA 1.0a and DA 2.04/2.05)

Simultaneous support to several controllers

Integrated OPC testing and diagnostics clientLanguages supported German, English

Ordering data


AX OPC SERVER , communication interface for OPC-compatiblevisualization with PC Worx-based controllers

AX OPC SERVER 2985945 1INTERBUS OPC server , data interface between distributedINTERBUS and Ethernet networks and visualization systems

IBS OPC SERVER 2729127 1AX ODP SERVER , Open Data Port server, communication inter-face for ODP-compatible visualization with PC Worx-based controlsystems.- For 5 remote control substations- For 8 remote control substations- For 10 remote control substations

- For 15 remote control substations- For 20 remote control substations- For 25 remote control substations- For 30 remote control substations- For 50 remote control substations- For 75 remote control substations- For 100 remote control su bstations- For 150 remote control su bstations- For 200 remote control su bstations- For 250 remote control su bstationsSNMP-OPC server , German and English, for monitoring and con-figuration of SNMP-capable equipment in HMI and SCADA sys-tems- For a maximum of 100 devicesSNMP-OPC agent , German and English, for integrating OPC-based automation solutions in company-wide network manage-ment systems

- For a maximum of 100 devices

AccessoriesExtension license , for 100 additional devices

SoftwareDrivers and interfaces

Communication interfacefor OPC-capable visualization


14/22For additional information, visit www.phoenixcontact.net/products 507PHOENIX CONTACT

Technical data Technical data Technical data

Pentium 4/Celeron, 2 GHz PC Pentium > 266 MHz PC Pentium > 266 MHz1024 Mbyte - min. 32 Mbyte

2048 Mbyte (Recommended 1 Gbyte) min. 20 Mbyte min. 20 Mbyte

DVD-ROM CD-ROM CD-ROMKeyboard, mouse Keyboard, mouse recommended Keyboard, mouse recommendedILC 1xx, ILC 3xx, RFC 470 - -

MS Windows XP, MS Windows 2003/2008 Server,MS Windows Vista

Windows XP SP3, Windows Vista, Windows 7,Windows 2003 Server SP1, Windows 2008 Server

Windows XP SP3, Windows Vista, Windows 7,Windows 2003 Server SP1, Windows 2008 Server

The ODP (Open Data Port) server enables the user to communicateopenly with supported controllers based on GPRS. Data is transmit-ted either online or as buffered historical values in the controller withtime stamp.

Monitoring and configuration of 100 SNMP-compatible devices inHMI/SCADA systems, SNMP Version v1 and v2c su pported ; OPCclients OPC Data Access 1.0A/2.0 or OPC Alarm and Events sup-ported, integrated MIB browser, import/export and creation of de-vice profiles supported, online and remote configuration possible viaremote PCs

Monitoring of OPC server, access to OPC server, SNMP proxyagent, SNMP Version v1 and v2c supported

Upgrade licenses are available Network monitoring with HMI/SCADA systems Network monitoring with HMI/SCADA systems

German, English German, English German, English

Ordering data Ordering data Ordering data

Type Order No. Pcs. /Pkt. Type Order No.Pcs. /Pkt. Type Order No.

Pcs. /Pkt.

AX ODP SERVER 5FU 2700391 1AX ODP SERVER 8FU 2700392 1AX ODP SERVER 10FU 2700393 1

AX ODP SERVER 15FU 2700394 1AX ODP SERVER 20FU 2700396 1AX ODP SERVER 25FU 2700397 1AX ODP SERVER 30FU 2700399 1AX ODP SERVER 50FU 2700400 1AX ODP SERVER 75FU 2700401 1AX ODP SERVER 100FU 2700402 1AX ODP SERVER 150FU 2700403 1AX ODP SERVER 200FU 2700404 1AX ODP SERVER 250FU 2700406 1

FL SNMP OPC SERVER V3 2701139 1

FL SNMP OPC AGENT V3 2701136 1

Accessories Accessories AccessoriesFL SNMP OPC SERVER V3 LIC 100 2701138 1 FL SNMP OPC AGENT V3 LIC 100 2701135 1

SoftwareDrivers and interfaces

GPRS-based communicationfor OPC-compatible visualization

Monitoring/configuration ofSNMP-compatible devices

in HMI and SCADA systems

Integration of OPC-based solutionsin management systems



SoftwareConfiguration, monitoring, diagnostics

Comprehensive diagnostics for

INTERBUS networksReliable diagnostics are essential for highsystem availability. INTERBUS networks canbe diagnosed reliably with the Diag+ diag-nostics tool integrated in Config+.

– Graphical display of error location in thenetwork topology

– Output of plain text messages with tipsfor error removal

– Online display of device statuses – Evaluation of statistical data for transmis-

sion quality – Saving comments about error messages

Integrated diagnostics for Ethernet

devicesWith Diag+, you can also view additionaldiagnostic information on the Ethernet de-vices used in the network.

– Receive traps by means of the integratedtrap receiver

– Graphical display of the Ethernet topolo-gy (2D view) showing the availability ofdevices

– Display of port statistics, error informa-tion on the devices, as well as other prop-erties that can be read via SNMP

– Calling of device web pages

Config+ from Phoenix Contact is theideal software solution for configuringINTERBUS networks.

The clear user interface allows you to as-sign addresses using drag & drop and to con-

figure even complex topologies. In addition,the Ethernet devices used can also bemapped and diagnosed. For reliable trouble-shooting in INTERBUS networks, the inte-grated Diag+ diagnostics tool can be used.

Numerous functions for efficientconfiguration

In Config+, you can use a wide range offunctions to efficiently configure systemswith INTERBUS networks.

– Reading and comparing real and plannedtopology

– Address assignment via drag & drop orcompletely automatic

– Parameterization of several masterboards and controller boards in oneproject

– Configuration of subsystems, e.g., lower-level robot systems

– Assignment and calling of external oper-ating tools for intelligent devices

– Use of various (e.g., user-defined) devicecatalogs

– Import and export of device catalogs – IP address assignment via BootP server – Non-proprietary device parameterization

using the FDT (field device technology)

concept – Parameterization of multiple devices with

the MDC wizard (multiple device configu-ration assistant)

– Monitoring function for wiring checks – Topology data transfer to the

SAFETYPROG safe programming tool

Config+





Optical drive DVD-ROMInterfaces Serial interface, Ethernet, PCIOperating equipment Keyboard, mouseMonitor resolution XGA (1024 x 768)Software requirementsOperating systems MS Windows XP SP3, MS Windows Vista Business SP2,

MS Windows 7 Professional (32/64-bit) SP1Supported browsers Internet Explorer Version 7 or laterTermination boards supported

IBS S7 400 ETH SDSC/ I-T 2819558IBS S7 400 ETH DSC/I-T 1) 2731102IBS S7 400 DSC/I-T 1) 2719962IBS S7 300 DSC-T 1) 2719975IBS PCI SC/RI/I-T 1) 2730080IBS PCI SC/RI-LK 2730187IBS PCI SC/I-T 1) 2725260IBS PCI SC-LK 1) 2700318FL IL 24 BK-B-PAC 1) 2862327FL IL 24 BK-PAC 1) 2862314FL NP PND-4TX IB 1) 2985974FL NP PND-4TX IB-LK 1) 2985929FLM BK ETH M12 DI 8 M12-2TX 2736916IL ETH BK DI8 DO4 2TX-PAC 1) 2703981

Basic functionsProject transfer to SAFETYPROG (software tool for programmingINTERBUS Safety)Project planning of Et hernet configurationsPlanning of the address a ssignmentTransfer of the address settings (address ranges, assignment list)from STEP 7 ®

Project planning of multimaster projects (several bus configurationsin one project)Comparison between real and planned bus configuration

Online display of device data sheetsComprehensive diagnostic functions, including optical d iagnosticswith Diag+Network diagnostics (functionality of Diag+)

Languages supported German, English, French, Italian, Spanish, Chinese

Ordering data


Config+ demo version with restricted range of functions (it is notpossible to save projects)

CONFIG+ DEMO 2868046 1

Config + full version for configuration and diagnosis of networks CONFIG+ 2868059 1

AccessoriesCopy license, allows you to install the software multiple times. Afull version is also required. Please specify the number of licensesrequired when ordering.

CONFIG+ CPY 2868062 1

509PHOENIX CONTACT

Notes:

1) EMC: Class A product, see page 553


Tool for fieldbus and network configuration




Diag+ NetScan – software for cyclic

INTERBUS network diagnosticsDiag+ NetScan enables simultaneousmonitoring of INTERBUS networks withseveral controller boards/controllers. Thetransmission quality of all FO paths in an en-tire system is thereby monitored perma-nently. Even lower-level buses connectedusing system couplers can be included inmonitoring.

Ordering example 1:

The Diag+ software is to be used on tendifferent PCs of a system for PROFI-NET/INTERBUS network diagnostics.

Items required: – 1x DIAG+ – 9x DIAG+ CPY

Ordering example 2:Ethernet-networked INTERBUS control-

ler boards (x 60) are to be monitored froma control room. In the event of an error, de-tailed diagnostic data should be displayed.

Items required: – 1 x DIAG+ NETSCAN

Diag+ – comprehensive diagnosticsfor PROFINET and INTERBUS net-

worksDiag+ is a special diagnostics software

tool that has been adapted to PROFINET

and INTERBUS and indicates both networkerrors and the current states of controllersand devices. Preventive diagnostic functionssuch as monitoring the transmission qualityof fiber optic (FO) paths in PROFINET andINTERBUS increase system availability.

Wide range of functions for reliablediagnostics

Status information, operating functions,plain text messages, and overviews ensurefast startup, error localization, and easy ori-entation in PROFINET and INTERBUS sys-tems.

– Start and stop of INTERBUS data traffic – Acknowledgment of INTERBUS error

messages – Bridging, switch on, and switch off of

INTERBUS devices – Display of error messages with tips for er-

ror removal and detailed information onthe device type and device state

– Display of color symbols for errors anddevice states

– Preventive diagnostics such as monitoringtransmission quality in FO paths

– Comparison and evaluation of FO diag-nostic data records at varying times

– Generation of acceptance reports as PDFfiles

– Integration in other software tools suchas visualizations

– Display of stored messages from the mes-sage archive of the controller

– Overview for the topology of Ether-net/PROFINET devices in a 2D graphic

– Specification of the accessibility of Ether-net/PROFINET devices

– Use of the configuration data and com-ments created with Config+ or PC Worxduring the configuration phase (e.g.,equipment IDs, station names)

– Management of individual rights of use forvarious users

Diag+



Technical data Technical dataHardware requirementsCPU Pentium 4/Celeron 1.6 GHz, minimum Pentium 4/Celeron 1.6 GHz, minimumMain memory (RAM) min. 1 Gbyte (2 GB for Windows Vista and Windows 7) min. 1 Gbyte (2 GB for Windows Vista and Windows 7)

Hard disk memory min. 2 Gbyte min. 2 Gbyte

Optical drive DVD-ROM DVD-ROMInterfaces Serial interface, Ethernet, PCI Serial interface, Ethernet, PCISupported interface connections INTERBUS controller board of the 4th generation,

PROFINET I/O Controller (Phoenix Contact only)INTERBUS Generation 4 controller board

Software requirementsOperating systems MS Windows XP SP3, MS Windows Vista Business SP2,


Basic functionsExecut ing importa nt commands (st art /stop /. ..) Execut ing importa nt comma nd s (st art /st op /...)

Reading in the installed bus structure Reading in the installed bus structureDetecting/representing error states (plain t ext from knowledge data-base)

Detecting/representing error states (plain text from knowledge data-base)

Saving diagnostics data in flash memory or parameterizing memoryof the controller board

Saving diagnostics data in flash memory or parameterizing memoryof the controller board

Diagnostics of INTERBUS FO paths (transmission quality) Diagnostics of FO paths (transmission quality)

Can be linked into other 32-bit applications as ActiveX Control in-cluding programming interface for further processing of all diagnos-tic data

Can be integrated into other 32-bit applications as ActiveX Control

Configuration comparison of Ethernet t opologies (parameterizedwith real topology)

-

Reading out the Controller Diagnose Archive -Expanded functionality

- Cyclical readout of diagnostic data from all INTERBUS controllerboards/controllers in the network overview (the number of controllerboards is not limited)

- Network overview: all INTERBUS controller boards/controllers in asystem are clearly shown in a t ree view ; detailed diagnostics can b ecalled up by clicking on the corresponding item

- Monitoring function: simultaneous monitoring of up to 10 INTER-BUS controller boards/controllers maximum

Languages supported German, English, French, I talian, Spanish, Chinese German, English, French, I talian, Spanish, Chinese



Diag+ demo, limited scope of functions (only valid for the first fivestations)

DIAG+ DEMO 2730734 1

Diag+ full version, for INTERBUS diagnostics (ActiveX Controlwith programming interface)

DIAG+ 2730307 1

Diag+ NetScan-Demo, limited scope of functions (cannot open orsave projects)

DIAG+ NETSCAN DEMO 2868091 1

Diag+ NetScan full version, for cyclic and simultaneous networkdiagnostics (ActiveX Control)

DIAG+ NETSCAN 2868075 1

Accessories AccessoriesCopy license, allows you to install the software multiple times. Afull version is also required. Please specify the number of licensesrequired when ordering.

DIAG+ CPY 2730404 1 DIAG+ NETSCAN CPY 2868088 1

511PHOENIX CONTACT


Diagnostics softwarefor INTERBUS, PROFINET

and Ethernet networks

Diagnostics softwarefor cyclic INTERBUS diagnostics


19/22

Technical dataHardware requirementsCPU Pentium/Celeron, 1.6 GHzMain memory (RAM) 1 GbyteHard disk memory 100 MbyteOptical drive DVD-ROM

Interfaces Ethernet portOperating equipment Keyboard, mouseSoftware requirementsOperating systems MS Windows XP SP3, MS Windows 7 (32 bit)

Basic functionsI/O checkDiagnosticsOffline/online parameterizationCan be called via TCI interface


Ordering data


Startup+ , for checking the wiring of Axioline stations and parame-terizing devices

STARTUP+ 2700636 1

512 PHOENIX CONTACT

Startup+ software is specifically tailoredto the Axioline system. It can be used totest the wiring of I/O stations and parame-terize the I/O modules used. Startup+ canbe used to display and operate your Axi-

oline station during startup without havingto connect the station to a higher-level net-work.

Startup+ offers many useful functions forall aspects of the Axioline I/O system:

– Reading and writing input and output sig-nals

– Comprehensive diagnostics during opera-tion

– User-friendly connection of software toan Axioline I/O station via the fieldbus orservice interface

– Support in connecting to the Axioline sta-tion by means of a wizard

– Software is open for connection to TCIinterfaces – for DTM integration in engi-neering systems

Startup+

SoftwareDevice parameterization

Software for startup and parameterizationof Axioline I/O stations



Technical dataHardware requirementsCPU Pentium 4/Celeron, 1 GHzMain memory (RAM) 1 GbyteHard disk memory 50 Mbyte (without DTM)Optical drive CD-ROM

Operating equipment Keyboard, mouseMonitor resolution 1024x768Software requirementsOperating systems MS Windows XP SP3, MS Windows 7 (32 bit)Basic functions

Integration and call up of DTMCan be called up via TC interface with assistant support f or automat-ic creation of projects


Ordering data


FDT container for integrating DTM devices

AX+ BASIC 2985068 1

513PHOENIX CONTACT

Central and manufacturer-independentdevice parameterization is a crucial advan-

tage in complex automation systems. UsingAutomationXplorer+ for the parameteriza-tion of devices based on FDT (field devicetechnology), you can easily set sensors andactuators remotely, for example. Devicesno longer have to be parameterized locally,saving you time and money.

FDT specifies a uniform, standardized in-terface between software interfaces andcommunication drivers for various networkprotocols. FDT represents a control or en-gineering system that integrates device userinterfaces – so-called DTMs (DeviceType Managers).

AutomationXplorer+ is a type of FDTframework application in which DTMs fromvarious manufacturers can be integratedfreely. Point-to-point communication, evenbeyond network boundaries, enables user-friendly parameterization of devices as wellas sensors and actuators. This takes place,for example, via several protocols used in asystem, such as Ethernet, PROFINET,INTERBUS, and the IO-Link protocol.Changes do not have to be made to the in-stalled basic devices.

AutomationXplorer+ can be called via

the TCI interface (tool calling interface) toconnect device-specific user interfaces as aDTM to an engineering system without FDTinterface, e.g., to the Siemens engineeringsystem. AutomationXplorer+ handles theintegration of the DTM instead of the engi-neering system. Device-specific user inter-faces can therefore be started directly fromthe engineering system.

AutomationXplorer+

SoftwareDevice parameterization

FDT frame applicationfor device parameterization

Notes:

AutomationXplorer+ can be downloaded free of charge, includinga selection of different communication and device DTMs for Ether-net and INTERBUS (PROFINET IO available on request) from thePhoenix Contact homepage at www.phoenixcontact.com.


21/22

Technical dataHardware requirementsCPU Pentium/Celeron, 1.6 GHzMain memory (RAM) 1 Gbyte (1 GB for Windows Vista)Hard disk memory min. 300 MbyteOptical drive DVD-ROM

Operating equipment Keyboard, mouseSoftware requirementsOperating systems MS Windows® 7 Home Premium (32-bit/64-bit) / MS Windows® 7

Professional (32-bit/64-bit) / MS Windows® Vista Business / MSWindows® XP Professional (SP-4 recommended)

Software requirements MS WORD 2003 or a higher versionBasic functions

Automated structure of the Inline and Fieldline I/O stations

Consideration of technical configuration rules

Automatic addition of accessories required by the system

Graphical representation of the planned station structure as a struc-ture planPhoenix Contact complete catalog as accessoriesProject report via MS WORDExport functions for ClipProject and PC WorxConsideration of release lists

Languages supported German, English, Spanish, French, Italian, Dutch, Russian

Ordering data


Software for planning the I/O configuration

PROJECT+ 2988667 1

514 PHOENIX CONTACT

Project+ is a tool that provides supportwhen planning and configuring an I/O sta-

tion as part of the automation setup of asystem, machine or property. With notraining required, you can create a function-al I/O station according to your specifica-tions very quickly with Project+. The sta-tion provides functions for connectingsensors and actuators and corresponds tothe technical configuration rules of the se-lected I/O system.

Workflow: enter the required I/O signalsfor connecting sensors and actuators inyour application. Project+ then determinesthe optimum product selection from theInline and Fieldline product ranges fromPhoenix Contact - the selected devices arecombined to create a station according tothe configuration rules. You are immediatelyprovided with a graphical structure plan anda parts list including item descriptions.

Thanks to various export functions, theconfigured I/O stations can be implementeddirectly for the subsequent engineering pro-cess.

Your advantages: – Automated creation of the I/O station in

accordance with the technical configura-tion rules

– Representation of the configured I/O sta-tion as a graphical structure plan

– Extension of your automation setupusing additional items from thePhoenix Contact product range

– Option of data export to CLIP PROJECT,PC Worx, Excel, and Word

– Full version can be downloaded for freewww.phoenixcontact.net/products

Project+

SoftwarePlanning and configuration

License-free software for planning Inlineand Fieldline I/O stations


22/22

Technical dataHardware requirementsCPU Atom™ or aboveMain memory (RAM) ≥ 512 MB (minimum)Hard disk memory ≥ 100 MB (minimum (client and server))

Software requirementsOperating systems Windows XP SP3 / WIndows 7Basic functions

Remote control softwareLanguages supported German, English, French, Spanish, Italian

Ordering data


Remote control- 1 client VL PORTICO SERVER 1 CLIENT 2701453 1- 4 clients VL PORTICO SERVER 4 CLIENT 2701455 1- 16 clients VL PORTI CO SERVER 16 CLIENT 2701456 1

Optimally tailor your operating conceptto the requirements of your system. Withthe Portico software, you can install up to16 thin clients exactly where you needthem. If multiple employees based in various

locations need to access the machine, youcan design individual solutions in this way.Portico is a remote control software tool

that allows you to view and fully interactwith the desktop of another industrial PCover a network. The software uses a cli-ent/server architecture that either supportspoint-to-point connection between a serv-er and client or allows communication to beestablished between a server and multipleclients. Thanks to the unique assignment ofaccess rights, your system is also protectedagainst unauthorized access.

Portico can also be used in a productionenvironment to visualize or control a ma-chine or process at a remote location in thesystem.

Your advantages: – Individual operation and monitoring con-

cepts with up to 16 clients – Simultaneous display of IPC screen infor-

mation at several operating stations with-out server operating system

– Inexpensive, thanks to the use of thin cli-ents

– Configuration tool for user-friendly man-agement of access rights

– Fast screen and input response, thanks tocommunication via TCP/IP network pro-tocol

– Low memory usage by server and client

System requirements: – CPU type/class: x86 – Minimum CPU clock rate: 1.0 GHz – Minimum RAM: 512 MB – Minimum memory required for server:

100 MB – Minimum memory required for client:

100 MB – LAN rate: 100 Mbps

– Graphics requirements: unlimited

Portico

SoftwareRemote control

Remote control software

67 control software

Documents