4.ipaso ethernet function setting

7/21/2019 4.IPaso Ethernet Function Setting

1/32

NEC Confidential

iPASOLINK ETH FUNCTION SETTING

- Ethernet Port Setting

- Vlan Setting

- Ethernet OAM Setting- Quality Of Service


2/32

PT. NEC Indonesia 2010 NEC ConfidentialPage 2

ETHER FUNCTION SETTINGETHER FUNCTION SETTING


3/32


ETH Function SettingETH Function Setting ETH Port Setting (1 of 2)ETH Port Setting (1 of 2)

Expand Provisioning from LCT menu.Expand ETH Function Setting from Provisioning sub menu.

Select ETH Port Setting from ETH Function Setting sub menu

Current ETH Port setting and port link status are displayed.

Click the main Board Port # to open its ETH Port Setting window

Select the Port Usage enable radio button to use the selected port

Set the other settings accordingly and click the OK button


4/32


ETH Function SettingETH Function Setting ETH Port Setting (2 of 2)ETH Port Setting (2 of 2)

MDI ports connect to MDIX ports via straight-through twisted pair cabling; bothMDI-to-MDI and MDIX-to-MDIX connections use crossover twisted paircabling, Auto MDI / MDIX removes these restriction on choosing cable type

When sending station transmits data faster than the receiving station can

accept it. The overwhelmed network element will send a PAUSE frame, whichhalts the transmission of the sender for a specified period of time

Port Usage Enable or disable the port (by default it is enabled)

Port Name Any user friendly port name can be used (maximum 32characters)

Media Type Electrical (RJ 45) or Optical (SFP) (by default it is electrical)

Speed Choose among 10 Mbps, 100 Mbps, 1000 Mbps, Auto

Negotiation (by default it is Auto Negotiation)When speed is chosen to be auto negotiated, duplex mode as well asMDI/MDIX will also be auto negotiated

Duplex Mode Full Duplex or Half Duplex (by default it is Full)

MDI or MDIX Medium Dependent Interface or Medium Dependent InterfaceCrossover (by default it is MDI)

Flow Control Enable or Disable Ethernet Flow Control (by default it is disabled)


5/32


ETH Function SettingETH Function Setting VLAN Setting (1 of 4)VLAN Setting (1 of 4)

Expand Provisioning from LCT menu.

Expand ETH Function Setting from Provisioning sub menu.

Select VLAN Setting from ETH Function Setting sub menu

Current VLAN settings are displayed.

Click on VLAN Setting tab to see the current VLAN setting

Click on VLAN List tab to see the current VLAN List


6/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 6


ClickAdd VLAN ID to open theAddVLAN ID window

Item Parameter Description

VLAN ID 1 to 4094 SpecifyVLAN ID

VALN

ServiceName

1 to 32

Character

Specify the

servicename of theVLAN

Enter the VLAN ID

Enter a VLAN Service Name for theVLAN ID

Click OK button to close the window

Click Delete VLAN ID to open the DeleteVLAN ID window

Enter the VLAN ID or its VLAN ServiceName to be deleted from the VLAN List

Click OK button to close the delete VLAN

ID window

Confirm the VLAN ID is deleted from thelist

Click the VLAN Service Name to bemodified from the VLAN List

Modify the VLAN Service Name

Click OK button to close the Modify VLANService Name window

Confirm the VLAN Service Name is changedin the VLAN List




Port Type Access / Truck / Tunnel


Port Type Access Only Allow untagged frame pass through

Tunnel Allow tagged and untagged frame pass through

Trunk Only allow tagged frame pass through

Enable check box Check Check the box to assign the port to the specified

VLAN.Uncheck

Untag Frame Assignment (Access

Port)

Check

Uncheck

Click the Port to which the VLAN ID is tobe assigned.

Port /VLAN Configuration is displayed

Select the Port Type under VLAN Assignment

Modem Port is always Trunk Port type

Select the VLAN ID (s) for the Selected Port

and Port Type by selecting the enable checkboxes

Main Board Ports can beAccess, Tunnel andTrunk Port types



Example of Modem PortExample of Modem Port

Modem port is always Trunk

(tagged frames only)

Modem port transports the VLAN IDs enabled

here. In this example, only tagged frames

belonging to VLAN ID =, 10, 20 , 30, 40 qnd 50are processed on this Modem1 port.



Example of Access Port (Untagged Frames only)Example of Access Port (Untagged Frames only)

Only Untagged frames are

processed on Port 3, andthese frames are assumedto belong to VLAN ID = 30

P1 (FE)

FmA

toC

MSGVLANx

Fm

A

to

B

MSGVLAN

30

FmA

toB

MSG



Example of Trunk Port (tag/Example of Trunk Port (tag/untaguntag Frames)Frames)

Untagged frames on

Port 1 are assumed tobelong to VLAN ID = 20

Tagged frames on

Port 1 must haveVLAN ID = 10 & 30

P2 (FE)

FmA

toB

MSG

Fm

Ato

CMSGVLAN

30

Fm

Ato

CMSGVLAN

30

FmA

toB

MSGVLAN20

FmA

toC

MSGVLANother



Example of Tunnel Port (Any Frame Forwarding)Example of Tunnel Port (Any Frame Forwarding)

Any frame type on Port 3, ei ther

untagged or tagged with any VLAN

ID, wil l be unconditionally tagged

(Outer Tag) with VLAN ID = 30 andthen processed.

P3 (FE)

Fm

A

to

BMSG

Fm

A

to

C MSG1

VLAN

any

FmA

toB

MSGVLAN30

FmA

toC

MSG1VLAN30

VLANany



ETH Function SettingETH Function Setting ETH OAM (1 of 4)ETH OAM (1 of 4)Ethernet OAM (Operations, Administration, and Maintenance)

Expand Provisioning from LCT menu.

Expand ETH Function Setting from Provisioning sub menu.

Select ETH OAM Setting from ETH Function Setting sub menu

Select OAM MEP tab to see the current MEP Index entries

Select OAM MIP tab to see the current MIP entries

Select OAM MEG tab to see the current MEG entries

Maintenance End Point

Maintenance Intermediate Point

Maintenance Entity Group



ETH Function SettingETH Function Setting ETH OAM (2 of 4)ETH OAM (2 of 4)

MEP Index Index (Serial) No. of the MEP1 to 192

MEP ID Unique ID of MEP 1 to 8191

CCM Transmit / Receive Enable ordisable CCM (Continuity Check Messages)transmit and/or receive

CCM Priority - Set priority for CCM 0 to 7

VLAN Untag Choose if VLAN tag to beused with Ethernet OAM messages or not

Item Choose among Main Board /Modem1 / 2

Port Choose the port number

ETH OAM Source MAC Address Specify

the MAC address to be used as source MACaddress of Ethernet OAM messages




MEG Configuration - Maintenance Entity Group (Add / Delete)

Enable enables an MEG

MEG Index Serial Number of MEG (1 to 5)MEG ID Unique ID for MEG

MEG Level hierarchy level of MEG (0 to 7)

ETH-CC Period Ethernet Continuity Check Message Period in ms or s

Peer MEP Configuration

Enable

Peer MEP ID (1 to 8191)

Peer List Check Status Enabled




MIP (Maintenance Intermediate Point)Settings Add / Modify / Delete

MIP Index 1 to 32

MEG Level 0 to 7

Item Main Board / Model 1 / 2

Port Port No.

Enable Enable or disable

VLAN ID VLAN ID to be used

Service Name VLAN Service Name


17/32


ETH Function SettingETH Function Setting RSTP Setting (1 of 2)RSTP Setting (1 of 2)


STP Mode RSTP Enable RSTP (Rapid Spanning Tree

Protocol)Disable Disable RSTP

Enable Check Enable RSTP on the port.

Uncheck Disable RSTP on the port.

Item Main Board

MODEM 1

MODEM 2

Select the object from drop-down list

Port - Select the port from drop-down list

Port Name 1 to 32Character

Specify the port name

Path Cost Auto Enable equipment calculate the pathcost automatically.

Manual Enter the path cost manually.

Path CostValue

1 to200000000

Enter the cost of path when PathCost is set to Manual

PortPriority

0 to 240 Specify the RSTP priority of the port

Edge Enable Set the Port as Edge port

Disable Remove Edge port feature

P-to-P Force true Enable Point-to-pointForce False Disable Point-to-point

Auto Set Point-to-point automatically


18/32


ETH Function SettingETH Function Setting RSTP Setting (2 of 2)RSTP Setting (2 of 2)

Item Parameter

Description

STP Bridge Priority 0 to61440

Set STP priority of the bridge

STP Bridge MAXAge

6 to 40 s Set the expiration of the Configuration

BPDU stored, Bridge will. notice that a

topology change has occurred after the

Max Age time elapses and the BPDU isaged out

STP Bridge HelloTime

1 s Set the period of sending ConfigurationBPDUs from Root Bridge.2 s

STP BridgeForward Delay

4 to 30 s Set the delay when the port is going tochange the state from Listening toLearning.

STP TX Hold 1 to 10 Set the number of BPDU which can be


19/32


QUALITY OF SERVICE SETTINGQUALITY OF SERVICE SETTING

ETH Function SettingETH Function etting QoS/Classification (1o / lassification (1


20/32


ETH Function SettingETH Function etting QoS/Classification (1o / lassification (1of 7)of 7)

Classify Field Type

VLAN CoS 802.1 q / p

IPv4 Precedence

Classify Priority used to classify

Classify Internal Priority



21/32





22/32



Classify Setting tab

iPASOLINK supports QoS based on MEF10 and REC4115 which classify the traffic into eight classes with the properInternal Priority according to the predetermined Policer. Except the default Policer, user can configure up to three

additional Policer which provide user the capability of realizing the user-orientation QoS strategy flexibly. The

Internal Priority is used for following purpose:

1) Identify Ingress traffic properly according to the predetermined Policer.

2) Mapping the eight classes of ingress traffic to four classes when queuing the Egress traffic

3) Copy the original internal priority to the capsulated frame to prevent the traffic priority from changing unexpectedly. (VLAN c-tagCoS/VLAN s-tag CoS)

Ingress

At the Ingress of the traffic, assign the internal priority and then perform flow control according to the predetermined policer,

coloring the frame with Yellow or Green which decide the QoS queue at the egress, discarding the frames of the traffic thatexceed the designated bandwidth (EIR, Excess Information Rate).

Egress

Queuing the frame according to the internal priority and the color assigned at ingress, determine forwarding or discardingthe frame.



23/32




QoS Port Setting Information

Scheduling Mode 2xSP Specify the queuing mode.

SP: Strict-Priority

DWRR: Deficit Weighted Round Robin

4xSP

1xSP+3xDWRR

4xDWRR

Port Drop Mode WTD Specify the port discard all packets at the tail end of the

queue when queue exceeded the pre set threshold. WTD

(Weighted tail drop).WRED Specify the port randomly discard the packets of lower

priority traffic before higher priority traffic when queue

exceeded the preset threshold. WRED (weighted randomearly detection).

Egress Shaper Rate 0 to 1000 Mbps Specify the maximum sending rate of the egress queue.

Internal Priority Queuing Policy per Ingress PortInternal Priority 0 to 7Class

0 to 7 Set the priority of Ingress port

Egress Class Setting Information

Class Shaper Rate 0 to 1000 Mbps Specify the maximum sending rate of the class.

Class DWRR Weight 1 to 127 Specify the weight of the queue.

Class Queue Length 16 to 128 Kbyte Specify the length for each Queue.

Queue 6 and 7 is fixed at 16Kbyte.

Wtd Yellow FrameThreshold

10 to 100 % Set the Threshold of Yellow Frame



24/32





25/32





26/32





27/32





28/32





29/32




30/32


ProvisioningProvisioning LLF SettingLLF Setting


31/32


Thank youThank you

This training document describes the current version of the equipment.

The specifications or configuration contained in this document are subject to changewithout notice.


32/32

4.ipaso ethernet function setting

Documents