Printing from Lightroom Classic CC4880

1. Select the photo(s) you want to print in your Library and go to Print.

2. In the bottom left hand corner, click on Page Setup. Select your printer and paper size and click OK. Make sure you do not choose a roll paper setting if you are printing on sheet paper.

10. Click on the dropdown menu, Layout. Go to Paper Handling, make sure Scale to fit paper size is unchecked, and click Save.

11. In the same dropdown menu, go to Print Settings. Set the Page Setup and Media Type. Page Setup -- If you select Sheet, a

dropdown menu for Manual Feed or Paper Tray will appear. Select Paper Tray when loading the paper into the bottom tray of the printer. Load paper print side down in the paper tray. The paper tray is rec-ommended when printing multiple sheets at once. Select Manual Feed if using the top feeder. Load paper print side up for the manual feed, and follow the prompts on the printer panel to load the paper. The manual feed is recom-mended when making one print, or printing on thick media.

Media Type -- The info sheet included with your paper will tell you the media type you should use. Remember to check that you are printing on a

4880 with the correct black ink for your media type.

Color Settings and Print Quality -- Make sure that Color Settings is set to Off (No Color Adjustment) and Print Quality is set to SuperFine - 1440dpi.

3. Use the Image Settings and Layout menus in the right hand panel to adjust the size of your image.

4. Make sure the Zoom to Fill box is unchecked. It will crop your image.

5. In Layout, use Cell Size to set the size of your image.

6. In the Print Job menu choose Low or Standard sharpening, depend-ing on what looks best for your print.

7. Under Color Management choose the profile for your paper. If you are using an Epson paper, most profiles are automatically installed. For other paper brands, you will need to install the ICC profile before you print.

8. If your profile is not listed in the dropdown, click Other, it will bring up all ICC profiles installed on the computer.

4880 series printers are set to one black ink (photo or matte). Be sure you are using a printer that has the correct ink for your paper.

9. Once you’ve set your ICC profile, click Printer to set the paper settings for the printer.

12. Make sure your paper is loaded properly, and click Print to send your file to the printer.

*The settings for the printer can also be set by clicking Print Settings in the lower left next to Page Setup. This will open up the same pop-up as Printer but it will save the settings, instead of sending the file directly to the printer.