4713 e eem 4 1-3 three-phase induction motor with squirrel cage and distinct pull-out torque 300w
TRANSCRIPT
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
1/19
Power Electronics / Electrical Machines / DriveTechnology
Equipment and systems for vocational qualifications and engineering education on the following topics:
Electrical machines, power electronics, drive technology
Complete machine labs, electrical machine labs and drive technology
EEM Electrical machines 300W
EEM Electrical machines 300W
Electrical machines convert electrical energy into mechanical energy or vice versa. A fundamental distinctioncan be drawn between DC, AC and three-phase machines.
The machines used for training in electrical engineering are designed so that nearly all of the circuitry and drivesfound in industry, commerce and at home can be conveyed in a didactic fashion in hands-on training. Using theservo drive and braking system it is possible to easily determine all of the relevant data for electrical machines.
Lucas Nlle GmbH Page 1/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
2/19
EEM 4-3 Asynchronous machines 300W
EEM 4-3 Asynchronous machines 300W
Asynchronous machines can be found with power levels ranging up into the MW range. Due to their simpledesign asynchronous squirrel-cage machines are particularly widespread.
The training objectives are:
Motor connection
Reversing rotation direction
Manual switching
Machine-specific values and characteristics
Measurement evaluation
Lucas Nlle GmbH Page 2/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
3/19
EEM 4.1-3 Three-phase induction motor with squirrelcage and distinct pull-out torque 300W
EEM 4.1-3 Three-phase induction motor with squirrel cage and distinct pull-out torque300W
Additional training objectives:
Star-delta connection
Steinmetz circuit
Reactance power compensation with capacitors of various capacitance
Lucas Nlle GmbH Page 3/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
4/19
Pos. Product name Bestell-Nr. Anz.
1 Three-phase asynchronous motor, squirrel-cage, 0.3kW SE2672-3G 1
Three-phase asynchronous motor with pronounced pull-out torque.
Nominal voltage: 690/400V, 50 Hz
Nominal current: 0.6A/1A
Nominal speed: 2800rpm
Nominal power: 0.37kW
Power factor (cos phi): 0.83
Dimensions: 340 x 210 x 210mm (WxHxD)
Weight: 9kg
2 Star-Delta switch CO3212-2D 1
Switch positions : O - star - delta (rotary switch)
Contact rating: 690V, 12A, max.
Inputs/outputs: 4mm safety sockets
Dimensions: 297 x 114 x125mm (HxWxD)
Weight: 0.8kg
Equipment set, consisting of:
Equipment set, consisting of:
Lucas Nlle GmbH Page 4/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
5/19
3 Cut-out switch, 4 pole CO3212-1W 1
Switch position: 0 - 1 (rotary switch)
Contact rating: 660V, 12A max.
Inputs/outputs: 4mm safety sockets
Dimensions: 297 x 114 x 125mm (HxWxD)
Weight: 0.8kg
4 Capacitive load, three-phase, 14-stage, CO3212-6X 1
The capacitive load is for step-by-step loading or compensation ofreactive power in conjunction with asynchronous 3-phase machinery.
Capacitors: 3x 1F / 2F / 4F / 8F
Electrical strength 450V
Dimensions: 297 x 228 x 140mm (HxBxT)
Weight: 2.0kg
Lucas Nlle GmbH Page 5/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
6/19
Pos. Product name Bestell-Nr. Anz.
5 Interactive Lab Assistant: Asynchronous machines 0.3/1kW SO2800-1C 1
Multimedia experiment software with virtual instruments, instructions
and documentation of results on squirrel-cage rotor machines,
polarity-switching Dahlander three-phase motors and three-phase
motors featuring two separate windings with power ratings of 0.3
and 1 kW.
Interactive experiment s et-ups
Measurements and graphics can be copied to the experiment
pages by means of drag and drop
Measurement and testing software can be started directlyfrom the experiment instruction pages
Questions with feedback and evaluation logic for testing
knowledge
Document print-out for simple printing of experimentinstructions with solutions
CD-ROM with Labsoft browser, course software and s oftwarefor braking systems and measuring equipment
Media:
Lucas Nlle GmbH Page 6/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
7/19
Additionally required - Machine test bench equipment set for servo-drive/braking system:
Lucas Nlle GmbH Page 7/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
8/19
Pos. Product name Bestell-Nr. Anz.
6 Servo machine test stand for 0.3kW machines incl. softwareActiveServo (D,GB,F,E)
CO3636-6V 1
The servo-machine test bench is a complete testing system forexamining electrical machines and drives. It consists of a digitalcontroller, a brake and the AktiveServo software. The systemcombines state-of-the-art technology with ease of operation.The system also allows manual and automated synchronisation tobe carried out.
The controller has the following features:
Dynamic and s tatic four-quadrant operation
10 selectable operating modes/machine models (torquecontrol, speed control, flywheel, li fting drive, roller/calander,fan, compressor, winding gear, arbitrarily defined time-
dependent load, manual and automated networksynchronisation)
Integrated galvanically isolated am plifier for voltage andcurrent measurement
Speed and torque displays
Four-quadrant monitor
USB interface
Thermal monitoring of the machine under test
Testing for the presence of a shaft cover.
Connection voltage: 400V, 45...65Hz
Maximum power output: 4kVA
Dimensions: 297 x 460 x 420mm (HxWxD)
Weight: 13.3kg
The brake is self-cooled asynchronous s ervo-brake with resolver.
The motor and sensor leads are connected via polarity-safe plugs.The machine has thermal monitoring and, in conjunction with thecontroller, it constitutes a driving and braking system that is free ofdrift and requires no calibration.
Maximum speed: 4000rpm
Maximum torque 10Nm
Temperature monitoring: continuous temperature sensor(KTY)
Resolver resolution: 65536 pulses/revolution
Dimensions: 275 x 210 x 210mm (WxHxD)
Weight: 6kg
ActiveServo is a program for recording characteris tics of machinesand for determining dynamic and static operating points. It emulates
Lucas Nlle GmbH Page 8/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
9/19
seven different loads (flywheel, pum p, calander, lifting drive,compress or, winding gear, arbitrarily configurable time-dependentload) for which the parameters can be individually configured.
Features:
Measurement, calculation and display of mechanical and
electrical variables
(Speed, torque, mechanical power output, current, voltage,active, apparent and reactive power, efficiency, power factor)
Simultaneous display of measured and calculated values(e.g. instant display of efficiency)
Measurement of voltage and current (including RMS valueseven for non-sinusoidal waveforms)
Speed or torque-controlled operation
Recording of variables over time
Programming of limiting values of speed or torque to preventinappropriate loading of the machine under test.
Operation in all four quadrants (display of generated torque)
Arbitrarily defined ramp functions for PC-control led loadexperiments
Display of characteristics from several experiments to betterillus trate the effect of parameter changes
Export of graphics and measurements
32-bit version for Windows
7 Rubber coupling sleeve, 0.3kW SE2662-2A 1
Rubber coupling sleeve used for the coupling of two machines
Permits rapid and safe assembly
Designed with internal ring gear
Material: rubber (neoprene)
Dimensions: 40 x 45mm (length x diameter)
Weight: 0.1kg
Lucas Nlle GmbH Page 9/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
10/19
8 Coupling guard, 0.1/0.3kW, transparent SE2662-7B 1
Plug-in plas tic panel to prevent people touching the revolvingcoupling between two machines
Material: clear makrolon with plug
Dimensions: 115 x 90 x 60mm (HxBxT)
Weight: 0.1kg
9 QuickChart, Servo-machine test stand safety and operatinginstructions (GB)
SO6200-7D 1
Short documentation covering the putting into operation of complexequipment and experiment set-ups.
Terminal assignment, safety instructions, help
Circuit and ass embly diagrams
Color print in DIN A3 format
Laminated: 2 x 250 m
Lucas Nlle GmbH Page 10/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
11/19
Pos. Product name Bestell-Nr. Anz.
10 Universal power supply for DC and Three-Phase Current CO3212-5U 1
Mains power supply for DC, AC and three-phase current and forexcitation of synchronous machines. The mains supply isspecially designed for use with electrical machines.
Outputs:Three phase: L1, L2, L3, N from 4 mm safety socketsDC: 0...240VDC variable, controlled and electronicallyprotected against overload and short circuits.Output current: 3...10A (adjustable current limiting)
Second DC supply ca. 210VDC, 6A fixed
Protective systems:Motor protection switch adjustable from 6.3...16AUndervoltage tripSafety cut-out
Mains connection: 3x 230/400V, 50/60Hz via CEE plugwith 1.8m mains lead
Dimensions: 297 x 228 x 140mm (HxWxD)
Weight: 3kg
Power supply:
Lucas Nlle GmbH Page 11/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
12/19
Measuring instruments:
Lucas Nlle GmbH Page 12/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
13/19
Pos. Product name Bestell-Nr. Anz.
11 Analog/digital multimeter, wattmeter + power-factor meter incl.Software
CO5127-1Z 1
The areas of electrical machines, power electronics and drivetechnology pose particular problems for measuring instruments. Inaddition to high-performance overload protection, the acquis ition ofmeasurement values must be performed accurately independently ofthe curve's shape. The universal measuring device has beendes igned particularly to satisfy these requirements. It cansimultaneously replace as many as four different measuringinstruments constituting a current/voltmeter, power and phas e-angle meter all in one. The graphic display allows for both student aswell demonstration experiments. The VI Starter software includedallows for visualisation of measurements on a PC.
Simultaneous, meas urement of voltage and currentindependent of the curve s hape (max. 600 V, 20 A)(measurement of clocked voltages)
Calculation of active, apparent and reactive power as well asthe power factor
Measurement of the total rms (RMS-AC+DC) ; AC rms (RMS-AC) and arithmetic mean (AV-AC+DC)
Impervious to electrical damage up to 20 A/600 V
Large-scale, high-contrast background-illuminated graphicdisplay (5,7")
Large-scale display or display of up to 4 meas urementvalues
Digital or pseudo-analog display
USB interface
Internal resis tance: current path 10mOhm, voltage path10MOhm
Voltage ranges: 30;300; 600V
Current ranges: 1; 10; 20A
Measurement accuracy: 2%
Automatic or manual measurement range selection
Demonstration test instrument for mains operation
Operating voltage: 230V, 50/60Hz
Dimensions: 297 x 228 x 140mm (HxBxT)
Weight: 2kg
The VI Starter software allows al l the meas urements to be displayed
on the PC. Up to 17 different displays can be opened.
Oscilloscope display of voltage, current and power
Consumption meter to display power consumed and output
Lucas Nlle GmbH Page 13/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
14/19
Data logger for 14 different variables
Data export for data logger
Characteristic recorder
Labview driver and supplied examples
32-bit version for Windows
Pos. Product name Bestell-Nr. Anz.
12 Set of safety measurement cables, 4mm (23 leads) SO5148-1L 1
Safety measurement cables with 4mm s afety plugs , coloured, PVCinsulation, highly flexible
Each set includes the following:
4 x 25cm long, black4 x 50cm long, black2 x 100cm long, blue2 x 100cm long, red1 x 100cm long, green/yellow1 x 150cm long, blue
1 x 150cm long, green/yellow2 x 150cm long, green2 x 150cm long, brown2 x 150cm long, black2 x 150cm long, grey
Wire cross section 2.5 mm
Capacity/category: 600V CAT II, 32A
13 Safety connection plug 19mm/4mm, black SO5126-9Y 15
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II/600V
Accessories:
Lucas Nlle GmbH Page 14/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
15/19
14 Safety connection plug 19mm/4mm, black, with tapping SO5126-9R 5
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II / 600V
15 Safety connection plug 19mm/4mm, blue SO5126-9V 2
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II / 600V
16 Safety connection plug 19mm/4mm, green/yellow SO5126-9W 2
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II/600V
Lucas Nlle GmbH Page 15/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
16/19
17 Mobile aluminium experiment stand, 3 levels, 6x earthed sockets,1250x700x1955mm
ST7200-3A 1
High-quality, mobile experiments s tand from the SybaPro range fordemons trations and experiments. Features alum inium profile legs
compatible with all add-ons and extensions for the SybaPro system.The mobile experiment stand is supplied in kit form and needs to beass embled by customers thems elves.
Table top:
30-mm table top made of highly compressed, multi-layer finechipboard conforming to DIN EN 438-1
Colour grey, RAL 7035, with 0.8-mm slightly textured laminatecoating (Resopal) on both sides, conforming to DIN 16926
Resis tant to many chemicals and reagents including diluteacids and alkalis
Resistant to heat, e.g. molten solder or heating at specificpoints such as by soldering tips or cigarette ends
Table top with solid impact-resistant protective edging madeof 3mm thick RAL 7047 coloured plastic
Coating and adhes ive are PVC free
Power supply with 6-outlet socket strip mounted underneaththe table top, 2-m lead and earthed plugs
Frame:
2 extruded aluminium profiles with multiple grooves 1800 x
120 x 40 mm (WxHxD)
8 equally sized grooves in extruded aluminium profiles (3 oneach side and 1 each on the front and back)
Grooves accommodate s tandard indus trial m ountings
4 H-shaped aluminium profiles, 1150 mm, for 3-layerorganisation of DIN A4 panels
Space for extension of power supply duct
Base made of rectangular tubing with 4 swivelling doublecasters , 2 of which have brakes
Table frame m ade of tough combination of rectangular tubingaround the full perimeter
Acid-res istant epoxy-res in coating, 80 m thick (approx.),colour RAL 7047
Dimensions:
Height of table top 760 mm
1250 x 1955 x 700 mm (WxHxD)
Lucas Nlle GmbH Page 16/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
17/19
18 Power supply for mobile working stations ST8008-8M 1
400-V CEE distribution panel with automatic circuit breakers forattachment to profiles on experiment trolleys or direct to table-top.
2 CEE sockets (400 V, 16 A, 5-pole) with safety flap1 Mains s ocket with earth (230 V) plus safety flapCircuit breaker: 1 x 3-pole line circuit breaker, type B, 16 AMains connection: 3 x 230/400 V, 50/60 Hz via CEE plug, 4-mmains leadDimensions: 530 x 130 x 110 mm (HxWxD)Weight: 3 kg
19 Wall or aluminium-profile mounting cable storage for 48 cables ST8003-8E 1
Accommodates about 48 safety measuring leads Suitable formounting on walls or aluminium profiles
20 PC holder for Syba experiment trolleys, height and widthadjustable
ST7200-5A 1
Shelf for desktop PC made of 1.5mm sheet steel punched withholes , suitable for all furniture in the SybaPro aluminium profilerange
Adjus table assembly height
Adjus table width (160 - 255mm)
Can be mounted to left or right
Includes all equipment necessary for assembly (4 bolts and 4tenon blocks)
Acid-res istant epoxy-res in powder coating, 80m thickapprox., colour RAL7047
Lucas Nlle GmbH Page 17/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
18/19
21 Monitor holder for flat screen monitor of weight up to 10kg, VESA75/100
ST8010-4L 1
Pivoting monitor holder for attachment to aluminium profiles offurniture in the SybaPro range. Allows a monitor to be placed inthe optimum position so that work and experiments are lesstiring.
Pivoting arm with two-part joint
Quick-lock for adjustment to any height on extrudedaluminium profile
VESA fastening 7.5 x 7.5cm
Includes VESA 75 (7.5x7.5) - VESA 100 (10x10) adapter
2 Cable clips
Adequate carrying capacity 10kg
TFT monitor can be turned parallel to the table edge
Separation can be adjusted to anywhere between 105 and480mm
Additionally included:
Cable management set for installing cables along the profiles of thealuminium lab system furniture in the SybaPro range
The set consis ts of the following:
3 Cross cable binders for front and rear grooves ofaluminium profile3 Cross cable binders for side grooves of aluminium profile12 Cable binders4 Aluminium cover profiles for covering and enabling wires tobe run along the grooves of an aluminium profile
Lucas Nlle GmbH Page 18/19 www.lucas-nuelle.com
-
8/10/2019 4713 E EEM 4 1-3 Three-phase Induction Motor With Squirrel Cage and Distinct Pull-out Torque 300W
19/19
22 Protection cover for three-level experiment trolleys ST8010-9Y 1
Dust cover for three-level experiment trolleys
For protecting equipment from dust and damp
For keeping equipment out of sight
Colour: matt dark grey with printed LN logo in orange)
Material: nylon fabric with polyurethane coating
High resistant to tearing, impregnated to be washable andwaterproof