3rd rec design with solution
DESCRIPTION
3rd Rec Design With SolutionTRANSCRIPT
-
AutoCAD
3rd Assignment with solutionBy:Hira Ejaz
(Punjab University College of Information Technology)
-
Draw this figure
-
Steps to make this figureMake a square of 10x10, by using line tool. Take outside offset of this square with 0.5 distance.Now take offset for internal lines with the gape of 2.Now u will got the figure like this
-
Figure will be like this
-
Steps to make this figureTake offset of those internal lines by the distance of 0.5.Now trim the extra lines.
Figure will be like this
-
Figure will be like this
-
Steps to make this figurePick the line tool and draw a square within the square with the reference of mid points.
- Steps to make this figureCopy that internal square and paste it somewhere.Rotate that copied object at
-
`Figure will be like this
-
Steps to make this figureAgain trim the extra lines.Take offset of each line now with the difference of 0.5.Trim extra lines.Fillet the edges of those lines now.
-
Steps to make this figureNow repeat the process for an inner square in 4 sides.