37190-e0 electricity&electronics cg ed2 pr1
TRANSCRIPT
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 1/55
Tech-World Manufacturing
Electricity and Electronics
Level oneCELL Guide
Edition 237190-E0
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 2/55
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 3/55
SECOND EDITION
First Printing, September 2005
Copyright 2005 Lab-Volt Systems, Inc.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted in any form by any means, electronic, mechanical, photocopied, recorded, or otherwise, without prior written permission from Lab-Volt Systems, Inc.
Information in this document is subject to change without notice and does not represent acommitment on the part of Lab-Volt Systems, Inc. The multimedia Tech-World software and
other materials described in this document are furnished under a license agreement or a
nondisclosure agreement. The software may be used or copied only in accordance with the termsof the agreement.
ISBN 0-86657-676-2
Lab-Volt®
and Tech-World ®
are registered trademarks of Lab-Volt Systems, Inc.
Windows™ and Works™ are trademarks of Microsoft Corp.
Lab-Volt recognizes product names as trademarks or registered trademarks of their respectiveholders.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 4/55
Lab-Volt License AgreementBy using the software in this package, you are agreeing to
become bound by the terms of this License Agreement,Limited Warranty, and Disclaimer.
This License Agreement constitutes the complete
agreement between you and Lab-Volt. If you do not
agree to the terms of this agreement, do not use thesoftware. Promptly return the Tech-World
Manufacturing Resources on multimedia (CD-ROM)
compact discs and all other materials that are part of
Lab-Volt's multimedia Tech-World Manufacturing
product within ten days to Lab-Volt for a full refund or
credit.
1. License Grant. In consideration of payment of thelicense fee, which is part of the price you paid for this Lab-Volt product, Lab-Volt, as Licensor, grants to you, theLicensee, a nonexclusive, nontransferable license to use
this copy of the CD-ROM software with the correspondingTech-World Manufacturing CELLs. Lab-Volt reserves allrights not expressly granted to the Licensee.
2. Ownership. As the Licensee, you own the physicalmedia on which the CD-ROM is originally or subsequently
recorded or fixed, but Lab-Volt retains title to and ownership of the software programs recorded on theoriginal compact disc and any subsequent copies of the
CD-ROM, regardless of the form or media in or on whichthe original and other copies may exist. This license is not asale of the original software program of Lab-Volt's CD-ROM or any portion or copy of it.
3. Copy Restrictions. The CD-ROM software and the
accompanying materials are copyrighted and contain proprietary information and trade secrets of Lab-Volt.Unauthorized copying of the CD-ROM even if modified,merged, or included with other software or with written
materials is expressly forbidden. You may be held legally
responsible for any infringement of Lab-Volt's intellectual property rights that is caused or encouraged by your failureto abide by the terms of this agreement. You may make
copies of the CD-ROM solely for backup purposes provided the copyright notice is reproduced in its entiretyon the backup copy.
4. Permitted Uses. This CD-ROM, CELL Guide, and all
accompanying documentation is licensed to you, theLicensee, and may not be transferred to any third party for any length of time without the prior written consent of Lab-Volt. You may not modify, adapt, translate, reverse
engineer, decompile, disassemble, or create derivativeworks based on the Lab-Volt product without the prior written permission of Lab-Volt. Written materials provided to you may not be modified, adapted, translated, or used to
create derivative works without the prior written consent of Lab-Volt.
5. Termination. This agreement is effective untilterminated. It will terminate automatically without noticefrom Lab-Volt if you fail to comply with any provisions
contained herein. Upon termination you shall destroy thewritten materials, Lab-Volt's CD-ROM software, and allcopies of them, in part or in whole, including modified
copies, if any.
6. Registration. Lab-Volt may from time to time update
the CD-ROM. Updates can be made available to you onlyif a properly signed registration card is filed with Lab-Voltor an authorized registration card recipient. 7. Miscellaneous. This agreement is governed by the laws
of the State of New Jersey.
Limited Warranty and DisclaimerThis CD-ROM software has been designed to assure
correct operation when used in the manner and within thelimits described in this CELL Guide. As a highly advanced software product, it is quite complex; thus, it is possiblethat if it is used in hardware configurations withcharacteristics other than those specified in this CELL
Guide or in environments with non-specified, unusual, or extensive other software products, problems may beencountered by a user. In such cases, Lab-Volt will makereasonable efforts to assist the user to properly operate the
CD-ROM but without guaranteeing its proper performancein any hardware or software environment other than as
described in this CELL Guide.
This CD-ROM software is warranted to conform to thedescriptions of its functions and performance as outlined inthis CELL Guide. Upon proper notification and within a
period of one year from the date of installation and/or
customer acceptance, Lab-Volt, at its sole and exclusiveoption, will remedy any nonconformity or replace anydefective compact disc free of charge. Any substantialrevisions of this product, made for purposes of correcting
software deficiencies within the warranty period, will bemade available, also on a licensed basis, to registered owners free of charge. Warranty support for this product islimited, in all cases, to software errors. Errors caused byhardware malfunctions or the use of non-specified
hardware or other software are not covered.
LICENSOR MAKES NO OTHER WARRANTIES OF ANY
KIND CONCERNING THIS PRODUCT, INCLUDING
WARRANTIES OR MERCHANTABILITY OR OF FITNESSFOR A PARTICULAR PURPOSE. LICENSOR DISCLAIMS
ALL OBLIGATIONS AND LIABILITIES ON THE PART OF
LICENSOR FOR DAMAGES, INCLUDING BUT NOT
LIMITED TO SPECIAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF OR IN CONNECTION WITH THE USE OFTHE SOFTWARE PRODUCT LICENSED UNDER THIS
AGREEMENT.
Questions concerning this agreement and warranty and allrequests for product repairs should be directed to Lab-Voltfield representative in your area.
LAB-VOLT SYSTEMS, INC.P.O. Box 686
Farmingdale, NJ 07727
Attention: Program Development
Phone: (732) 938-2000 or (800) LAB-VOLT
Fax: (732) 774-8573
Technical Support: (800) 522-4436 Technical Support
E-Mail: [email protected]
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 5/55
Table of Contents
i
Introduction ................................................................................................................1
Topic 1 – Introduction to Electricity and Electronics.......................................1
Activity 1 − Electricity Is All Around Us.................................................................. 3
Activity 2 – Three Cheers for Careers......................................................................4
Activity 3 – The Structure of the Atom....................................................................5
Topic 2 – Magnetism, Electricity, and Electromagnetism.................................7
Activity 1 – Magnetism.............................................................................................9
Activity 2 – Magnetism and the Compass.............................................................. 10
Activity 3 – Voltage, Current, Resistance, and Power...........................................11
Activity 4 – Electromagnetism................................................................................ 12
Topic 3 – Direct Current.........................................................................................13
Activity 1 – Electrical Measurements ....................................................................14
Activity 2 – Series and Parallel Circuits ................................................................15 Activity 3 – Series-Parallel Circuits ....................................................................... 16
Topic 4 – Circuit Components...............................................................................17
Activity 1 – Voltage and Current Dividers............................................................. 19
Activity 2 – Mechanical Switches...........................................................................20
Activity 3 – Electromagnetic Switch Operation..................................................... 21
Topic 5 – Alternating Current ...............................................................................23
Activity 1 – Resistive AC Circuits ..........................................................................25
Activity 2 – AC Oscil loscope Measurements .......................................................... 26
Activity 3 – Reactive AC Circuits ...........................................................................27
Activity 4 – Time Constants.................................................................................... 28
Activity 5 – Transformers ....................................................................................... 29
Topic 6 – Electrical Wiring.....................................................................................31
Activity 1 – Working with Electrical Wire ............................................................. 32
Activity 2 – Connecting an On/Off L ight Circuit ................................................... 33
Activity 3 – Connecting a Branch Circuit ..............................................................34
Activity 4 – Connecting a Three-Way Switch Circuit ............................................35
Topic 7– Sensors.......................................................................................................37 Activity 1 – Mechanical Sensors ............................................................................. 38
Activity 2 – Non-Contact Sensors...........................................................................39
Appendices.................................................................................................................41
Appendix A – Safety.............................................................................................. A-1
Appendix B – Internet Resources......................................................................... B-1
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 6/55
Table of Contents
ii
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 7/55
Electricity and Electronics Introduction
1
INTRODUCTION
This CELL Guide is to be used with the multimedia presentation and StudentGuide/Portfolio. The CELL Guide remains at the workstation and containsinformation and procedures that are specific to the CELL.
This CELL Guide includes topic information, hands-on instructions, and appendicesspecific to the CELL.
The information in the CELL Guide follows the arrangement below:
♦ topic objective
♦ topic overview
♦ new terms and words
♦ activity objectives
♦ procedures for completing activity tasks
Appendices include Safety, Internet Resources, or other CELL specific tables orcharts.
Tips for navigating the multimedia presentation are detailed in theTech-Lab
M ul t im edia U ser ’s Guid e . There should be a copy of this at the student workstation.I f this is not available, please ask your instructor.
==============
WARNING! The cables and accessories supplied with a specific Lab-Volt trainingsystem or module have been carefully selected, in regard to severaltechnical aspects, to ensure that the Lab-Volt equipment is safe for theend users (i.e. instructors, students, etc.). Never use these cables andaccessories with other Lab-Volt training systems or modules, or withequipment from any other manufacturer, unless otherwise specified inLab-Volt course material.
==============
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 8/55
Electricity and Electronics Introduction
2
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 9/55
Electricity and Electronics Topic 1 – Introduction to Electricity and Electronics
1
TOPIC 1 – INTRODUCTION TO ELECTRICITY AND ELECTRONICS
Objective
When you have completed this topic, you will be able to describe the fields of electricity and electronics, including career opportunities and a brief history of major developments. You will summarize some of the interrelated topics you willstudy in this CELL. Finally, you will be able to describe the structure of the atomand relate its behavior to the production of electricity.
Overview
Here you will review the many applications of electricity you already know, butprobably take for granted.
A brief analysis of the structure of the atom, the fundamentals of electricity, andthe more important advancements in the field will help you get a feel for today’s
level of technology.
An overview of career options will answer your questions about what you can dowith the knowledge you’ll gain from this CELL. A look ahead at the remainingtopics in this CELL will give you an idea of how you’ll be preparing for thetransition from school to the workplace.
New Terms and Words
apprentice one who is learning a trade or occupation, especially as amember of a labor union.
associate a degree conferred by a two-year college after the prescribedcourse of study has been completed.
atom a unit of matter, the smallest unit of an element, having allthe characteristics of that element.
bachelor an academic degree conferred by a college or university uponthose who completed the undergraduate curriculum(typically four years of study).
charge a property of matter that is responsible for electromagneticinteraction.
conductor a substance or medium that conducts an electric charge.
current the amount of electric charge flowing past a specified circuit
point per unit time. doctorate the degree or status of a doctor as conferred by a university.
electrician one whose occupation is the installation, maintenance,repair, or operation of electric equipment and circuitry.
electricity the physical phenomena arising from the attraction of particles with opposite charges and the repulsion of particleswith the same charge.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 10/55
Electricity and Electronics Topic 1 – Introduction to Electricity and Electronics
2
electromagneticforce
form of energy arising from charged particles such aselectrons.
electron a negatively charged particle of an atom.
engineer one who applies scientific and mathematical principles to
practical ends such as the design, manufacture, and operationof efficient and economical structures, machines, processes,and systems.
insulator a material or device that insulates, or does not conductelectricity.
integratedcircuit
a tiny slice or chip of material on which a complex of electronic components and their interconnections is etched orimprinted.
master An academic degree conferred by a college or university uponthose who complete at least one year of prescribed study
beyond the bachelor’s degree. microprocessor an integrated circuit that contains the entire centralprocessing unit of a computer on a single chip.
neutron an electrically neutral particle of an atom.
nucleus the positively charged central region of an atom, composed of protons and neutrons.
Ohm’s Law a mathematical equation relating voltage, current, andresistance in an electric circuit.
proton a positively charged particle of an atom.
qualityassurance
a system for ensuring the maintenance of proper standards inmanufactured goods, especially by periodic random inspection
of the product. resistance the opposition of a body or substance to current passing
through it.
semiconductor any of various solid crystalline substances, such asgermanium or silicon, having electrical conductivity greaterthan insulators but less than good conductors.
staticelectricity
an accumulation of electric charge on an insulated body; anelectric discharge resulting from such a charge.
technician an expert in a technical field or process.
transistor a semiconductor device used in a circuit as an amplifier,
detector, or switch. vacuum tube an electron tube from which all or most of the gas has been
removed, permitting electrons to move with low interactionwith any remaining gas molecules.
valenceelectrons
electrons located in the last orbit or outermost portion of anatom.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 11/55
Electricity and Electronics Topic 1 – Introduction to Electricity and Electronics
3
Act ivi ty 1 − Electricity Is All Around Us
Objective
When you have completed this activity, you will have the knowledge and skills toidentify the nature as well as the diverse applications of electricity that you
probably take for granted.
You will be able to:
• recognize how common electrical devices and systems have become in yourhome, car, and in industry.
• identify other forms of energy that electricity can be converted to in theseenvironments.
• identify advancements that have shaped today’s technology.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 12/55
Electricity and Electronics Topic 1 – Introduction to Electricity and Electronics
4
Act iv ity 2 – Three Cheers for Careers
Objective
When you have completed this activity, you will have the knowledge and skills toput your understanding of electricity and electronics into practice, even if you
choose a career outside of these fields.
You will be able to:
• identify the many career opportunities in the electrical and electronics fields.
• describe alternative and supporting career options.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 13/55
Electricity and Electronics Topic 1 – Introduction to Electricity and Electronics
5
Act ivity 3 – The Structure of the Atom
Objective
When you have completed this activity, you will have the knowledge and skills todefine the behavior of electrical circuits, which is directly related to the properties of
an atom.
You will be able to:
• describe the structure of the atom.
• relate the behavior of the atom to the production of electricity.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 14/55
Electricity and Electronics Topic 1 – Introduction to Electricity and Electronics
6
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 15/55
Electricity and Electronics Topic 2 – Magnetism, Electricity, and Electromagnetism
7
TOPIC 2 – M AGNETISM, ELECTRICITY, AND ELECTROMAGNETISM
Objective
When you have completed this topic, you will understand and be able todemonstrate the basic principles of magnetism and electromagnetism. You will alsobe able to explain and demonstrate the elementary quantities of an electricalcircuit: voltage, current, resistance, and power.
Overview
In this topic, you will demonstrate how a compass can be used to determinegeographical direction and identify magnetic poles. By using iron fi lings, you willshow magnetic field patterns. You’ll make a temporary magnet from an ordinarynail and show how a temporary magnet can lose its magnetic properties.
A working knowledge of electrical and electronic systems begins with a solidunderstanding of the parameters on which they are based. These are voltage,current, resistance, and power.
As you move on to electromagnetism, you will explore the unique relationshipbetween magnetism and electricity.
New Terms and Words
analogous showing a likeness between two things that are similar insome way.
analogy a comparison based on similarities between two things thatare otherwise dissimilar.
battery two or more connected cells that convert chemical energy toelectrical energy.
bits units of information storage capacity.
circuit a closed path followed or capable of being followed by anelectric current if a voltage source is present.
compass a device used to determine geographic direction, usuallyconsisting of a magnetic needle or needles, horizontallymounted or suspended, and free to pivot to align with the
magnetic field of Earth. current the number of electrons flowing past a specified circuitpoint each second.
domains regions in a ferromagnetic material in which the directionof magnetization is uniform and different from that inadjacent regions.
electromagnetism the magnetic field around a coil of wire or other conductorwhen current passes through it.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 16/55
Electricity and Electronics Topic 2 – Magnetism, Electricity, and Electromagnetism
8
headings a course or direction followed by a ship or plane.
load a device or the resistance of a device to which power isdelivered.
magnetic field an area where magnetic force is present.
parameters a set of measurable factors, such as temperature and
pressure, that define a system and determine its behavior.permanentmagnets
pieces of magnetic material that have been so stronglymagnetized that they retain their magnetism indefinitely.
permeability the property of a magnetizable substance that determineshow much it modifies the magnetic field.
pole the area on a magnet where the magnetic force isstrongest.
power a source or means of supplying energy.
resistance the opposition of a body or a substance to current passingthrough it.
Resistor a device used to control current in an electric circuit byproviding resistance.
schematic a drawing that uses standard symbols to show electricalpaths and components.
switch a device used to break or open an electric circuit, or divertcurrent from one conductor to another.
temporarymagnet
a magnet whose field quickly loses its magnetic power.
voltage the difference in electrical charge between two points. TheVolt (V) is the unit for measuring voltage.
work the transfer of energy from one physical system to another.
.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 17/55
Electricity and Electronics Topic 2 – Magnetism, Electricity, and Electromagnetism
9
Act iv ity 1 – Magnetism
Objective
When you have completed this activity, you will have the knowledge and skills toexplain and demonstrate the basic principles of magnetism.
You will be able to:
• define magnetism.
• describe the characteristics of a magnet.
• distinguish between permanent and temporary magnets.
• show the pattern of a magnetic field using loose iron filings.
• show how to make a temporary magnet from an ordinary nail.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 18/55
Electricity and Electronics Topic 2 – Magnetism, Electricity, and Electromagnetism
10
Act ivity 2 – Magnetism and the Compass
Objective
When you have completed this activity, you will have the knowledge and skills toexplain the history of the compass as a navigational aid and to use it yourself to
identify geographical location.
You will be able to:
• describe the use of the compass as a navigational aid.
• identify geographical direction using a compass.
• use a compass to identify the poles of a magnet.
• make your own compass.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 19/55
Electricity and Electronics Topic 2 – Magnetism, Electricity, and Electromagnetism
11
Act ivity 3 – Voltage, Current, Resistance, and Power
Objective
When you have completed this activity, you will have the knowledge and skills todescribe basic electrical concepts.
You will be able to:
• describe the relationship of voltage, current, resistance and power.
• interpret a basic schematic diagram.
• use the correct units and quantities to describe electrical measurements.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 20/55
Electricity and Electronics Topic 2 – Magnetism, Electricity, and Electromagnetism
12
Act ivity 4 – Electromagnetism
When you have completed this activity, you will have the knowledge and skills to
explain and demonstrate the basic principles and practical applications of electromagnetism.
You will be able to:
• explain the relationship between electricity and magnetism.
• apply the left hand rule to identify magnetic poles, field direction, andcurrent direction.
• investigate the properties of an electromagnet.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 21/55
Electricity and Electronics Topic 3 – Direct Current
13
TOPIC 3 – DIRECT CURRENT
Objective
When you have completed this topic, you will be able to use the Electricity Trainerto demonstrate series, parallel, and series-parallel circuits. You will apply Ohm’sLaw to calculate voltage, current, and resistance for the three basic circuit types.
Overview
A working knowledge of electrical and electronic systems begins with a solidunderstanding of the parameters on which they are based. These are voltage,current, resistance, and power.
Even the most complex circuits are just combinations of basic building blocks suchas simple series and parallel circuits. Your first practical experience will be to showhow simple circuits can be connected.
You will gain practice in measuring circuit characteristics using the digitalmultimeter (DMM) and in calculating these characteristics by applying Ohm’s Law.
New Terms and Words
nomograph a chart representing numerical relationships.
parameters a set of measurable factors, such as temperature andpressure, that define a system and determine its behavior.
reciprocal a number related to another number in such a way that,when multiplied together, their product is 1. The reciprocal
of 3/4 is 4/3. [3/4 x 4/3 = 12/12 = 1]. schematic a drawing that uses standard symbols to show electrical
paths and components.
short circuit a low-resistance connection established between two pointsin an electric circuit.
voltage drops The amount of voltage across a resistor, also called the IRdrop.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 22/55
Electricity and Electronics Topic 3 – Direct Current
14
Act ivity 1 – Electr ical Measurements
Objective
When you have completed this activity, you will have the knowledge and skills toobserve the rules of safety and use the Electricity Trainer.
You will be able to:
• follow the rules of electrical safety.
• identify the components of the Electricity Trainer.
• read values on the multimeter.
• describe Ohm’s Law.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 23/55
Electricity and Electronics Topic 3 – Direct Current
15
Act ivity 2 – Ser ies and Parallel Circuits
Objective
When you have completed this activity, you will have the knowledge and skills toexplain and demonstrate the configuration and characteristics of series and parallel
circuits.
You will be able to:
• recognize series and parallel circuit configurations.
• calculate and measure equivalent resistance values.
• calculate and measure voltage.
• calculate and measure current.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 24/55
Electricity and Electronics Topic 3 – Alternating Current
16
Act ivity 3 – Ser ies-Parallel Circuits
Objective
When you have completed this activity, you will have the knowledge and skills toexplain and demonstrate the configuration and characteristics of series-parallel
circuits.
You will be able to:
• recognize series-parallel circuit configuration.
• calculate and measure equivalent resistance values.
• calculate and measure voltage.
• calculate and measure current.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 25/55
Electricity and Electronics Topic 4 – Circuit Components
17
TOPIC 4 – CIRCUIT COMPONENTS
Objective
When you have completed this topic, you will be able to describe the characteristicsof voltage and current dividers and apply Ohm’s Law to circuits that contain thesecomponents. You will be able to identify the schematic symbols for circuitcomponents and connect a variety of mechanical switch circuits. F inally, you will beable to demonstrate how electromagnets are used in solenoids and relays.
Overview
In this topic, you will develop a working knowledge of some common components of an electrical circuit. You will build circuits that include current and voltagedividers.
Most electrical circuits include one or more switches to turn something on or off,
reverse direction, or change an operating configuration. Your practical experiencecontinues as you fabricate circuits that contain single-pole, double-pole, and three-way switches.
New Terms and Words
armature the moving part of an electromechanical device, such as arelay, loudspeaker, or buzzer.
energize to supply with an electric current, or connect to a source of electricity.
hysteresis the difference between a device’s response to an increasingsignal and a decreasing signal.
latch a device or circuit used to maintain a particular state, suchas on or off, in response to a particular input.
maintained a contact that remains in position until manually ormechanically moved to another position.
momentary a contact that remains in position only as long as it is heldthere manually or mechanically; when released it returns toits original position.
parameters a set of measurable factors, such as temperature andpressure, that define a system and determine its behaviors.
poles the area on a magnet where the magnetic force is strongest.potentiometer a variable resistor connected as a series voltage divider.
relay an electromechanical device with contacts that are openedand closed by an electromagnet.
rheostat a variable resistor used to regulate current.
solenoid an electromagnet with a sliding core.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 26/55
Electricity and Electronics Topic 4 – Circuit Components
18
switch a device used to break or open an electric circuit or divertcurrent from one conductor to another.
switches devices used to break or open an electric circuit or divertcurrent from one conductor to another.
throws the number of different positions to which a switch can beset.
voltage dividers the amount of voltage across a resistor, also called the IRdrop.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 27/55
Electricity and Electronics Topic 4 – Circuit Components
19
Act ivity 1 – Voltage and Current Dividers
Objective
When you have completed this activity, you will have the knowledge and skills todescribe the characteristics and give examples of voltage and current dividers. You
will also be able to apply Ohm’s Law to circuits that contain these components andverify your calculations by measuring circuit parameters with a digital multimeter.
You will be able to:
• define voltage and current dividers.
• recognize schematic symbols for various circuit components.
• relate the characteristics of resistors
• differentiate types of resistors by reading the labeling code.
• distinguish between fixed resistors and variable resistors.
• apply Ohm’s Law to various circuits that included resistors.
• verify calculations by measuring circuit parameters with a digitalmultimeter.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 28/55
Electricity and Electronics Topic 4 – Circuit Components
20
Act ivity 2 – Mechanical Switches
Objective
When you have completed this activity, you will have the knowledge and skills toconnect and operate several basic types of switch circuit.
You will be able to:
• recognize the schematic symbols for different contact configurations.
• demonstrate the difference between momentary and maintained contactoperation.
• connect and operate SPST and SPDT switch circuits.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 29/55
Electricity and Electronics Topic 4 – Circuit Components
21
Act ivity 3 – Electromagnetic Switch Operation
Objective
When you have completed this activity, you will have the knowledge and skills toexplain and demonstrate the basic principles and practical applications of
electromagnetism.
You will be able to:
• show how electromagnets are used in solenoids and relays.
• operate a relay as a control circuit, a latch, and a buzzer.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 30/55
Electricity and Electronics Topic 4 – Circuit Components
22
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 31/55
Electricity and Electronics Topic 5 – Alternating Current
23
TOPIC 5 – ALTERNATING CURRENT
Objective
When you have completed this topic, you will be able to identify the importantparameters of ac circuits and take ac measurements with a DMM and anoscilloscope.
Overview
Applying your knowledge of dc circuits will help you to solve resistive ac circuitproblems. Once reactive components are introduced into your circuits, you’ll learnabout additional ac parameters such as impedance, reactance, frequency, andphase. You’ll discover the value and versatility of the oscilloscope as an importantdiagnostic tool.
New Terms and Words
add-invert method an oscilloscope measurement by which one channel issubtracted from the other, resulting in a display of thedifference between the two measurement points.
amplitude the level, or magnitude, of an alternating current or voltage.
attenuation a reduction in amplitude with little or no distortion.
average value the sum of the sine values for all angles up to 180° dividedby the number of values.
capacitance the ability of a device to store electrical charge.
cathode a negatively charged electrode, as of an electrolytic cell, astorage battery, or an electron tube.
cemf counter electromotive force. An electromotive force thatopposes the passage of current in a specified direction.
cosine wave A waveform with deviation that can be graphicallyexpressed as the cosine curve, which is the graph of theequation y = cos x
coupling the transfer of energy from one circuit to another.
current sensing resistor
a small resistance connected in series with a circuit whosecurrent is to be measured.
cycles single complete executions of a periodically repeatedphenomenon
dielectric a non-conducting or insulating material. ferrite core a nonconductive, powdered, compressed, magnetic, iron-
based material.
frequency the number of complete cycles in one second of alternatingvoltage or current.
impedance a measure of the total opposition to current flow in an accircuit; it is made up of two components, ohmic resistanceand reactance.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 32/55
Electricity and Electronics Topic 5 – Alternating Current
24
inductance the property of a conductor to oppose a change in currentflowing through itself.
mutual inductance the ability of one coil to induce voltage into another coil inclose proximity by way of a fluctuating magnetic field.
period the time required for an ac waveform to complete one cycle.
phase angle the measure of progression of a periodic wave from a choseninstant or position.
primary a transformer winding connected to a source voltage.
quadrant any of the four areas into which a plane is divided by thereference axes in a Cartesian coordinate system, designatedf i r st, second, thi r d, and fourth, counting counterclockwisefrom the area in which both coordinates are positive.
reactance opposition to the flow of alternating current caused by theinductance and capacitance in a circuit rather than byresistance.
secondary a transformer winding connected to the load. sine In a right triangle, the ratio of the length of the sideopposite an acute angle to the length of the hypotenuse.
sine wave a waveform with deviation that can be graphicallyexpressed as the sine curve, which is the graph of theequation y = sin x.
tap a fixed electrical connection at a specified position on atransformer winding.
time constant the time required for voltage or current to rise or fall by63%. This is the result of the ability of inductors orcapacitors to store energy.
transformer a device used to couple energy from one circuit to anotherthrough mutual inductance.
turns ratio the numeric relationship between the primary andsecondary turns of a transformer.
zero crossing a point on an ac waveform at which the waveform crossesthe 0V axis.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 33/55
Electricity and Electronics Topic 5 – Alternating Current
25
Act ivity 1 – Resis tive AC Circuits
Objective
When you have completed this activity, you will have the knowledge and skills tocalculate and measure resistive ac circuit parameters.
You will be able to:
• measure ac voltage and current with a DMM.
• perform Ohm’s Law calculations for resistive ac circuits.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 34/55
Electricity and Electronics Topic 5 – Alternating Current
26
Act ivity 2 – AC Oscilloscope Measurements
Objective
When you have completed this activity, you will have the knowledge and skills touse an oscilloscope for ac circuit measurements and analysis.
You will be able to:
• describe the operation of an oscilloscope.
• operate the controls of an oscilloscope.
• connect oscilloscope probes for circuit measurements.
• measure the peak and peak-to-peak amplitude of an ac signal.
• determine the frequency, period, and phase of an ac signal
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 35/55
Electricity and Electronics Topic 5 – Alternating Current
27
Act ivity 3 – Reactive AC Circuits
Objective
When you have completed this activity, you will have the knowledge and skills tocalculate parameters and perform measurements on reactive ac circuits.
You will be able to:
• explain and demonstrate the operation of capacitors and inductors in accircuits.
• determine the reactance of capacitors and inductors.
• solve ac circuit problems using Ohm’s Law.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 36/55
Electricity and Electronics Topic 5 – Alternating Current
28
Act iv ity 4 – Time Constants
Objective
When you have completed this activity, you will have the knowledge and skills tocombine resistors, capacitors, and inductors in various ways to create time
constants and affect an ac signal.
You will be able to:
• demonstrate the properties of RC and RL circuits.
• view the effects of different component combinations with an oscilloscope.
• calculate and measure time constants.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 37/55
Electricity and Electronics Topic 5 – Alternating Current
29
Act iv ity 5 – Transformers
Objective
When you have completed this activity, you will have the knowledge and skills toexplain and demonstrate the operation of a transformer.
You will be able to:
• connect transformer circuits.
• measure transformer parameters.
• calculate primary and secondary circuit parameters.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 38/55
Electricity and Electronics Topic 5 – Alternating Current
30
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 39/55
Electricity and Electronics Topic 6 – Electrical Wiring
31
TOPIC 6 – ELECTRICAL WIRING
Objective
When you have completed this topic, you will be able to wire and test basicelectrical circuits.
Overview
Topic 6 gives you the skills to prepare, install, and test electrical devices and wiring. You will cut, strip, and connect wires to switches, receptacles, and a lamp. You willconnect and demonstrate on/off and two-way switch circuits and a branch circuit.
New Terms and Words
burrs rough edges on material, such as metal, after it has beencast, cut, or dril led.
cable a bound or sheathed group of mutually insulated
conductors.circuit breakers automatic switches that stop the flow of electric current in a
suddenly overloaded or otherwise abnormally stressedelectric circuit.
circular mil a unit of measure of the cross-sectional area of a conductor,equal to the square of its diameter in mils.
cross section a section formed by a plane cutting through an object,usually at right angles to an axis.
duplex relating to a single assembly having two identical units thatare capable of operating simultaneously or independently.
filament a fine wire heated electrically until it glows.frost line the depth to which frost penetrates the earth.
fuses safety devices that protect an electric circuit from excessivecurrent. Fuses consist of or contain a metal element thatmelts when current exceeds a specific amperage, therebyopening the circuit.
gauge thickness or diameter, as of sheet metal or wire.
mil a unit of length equal to one thousandth of an inch (0.001in.).
overload loading in excess of normal rating.
strip gauge a guide that is printed, stamped, or molded onto a device toprovide a reference for the strip length of a wire.
wire a usually pliable metallic strand or rod made in manylengths and diameters, often electrically insulated, usedchiefly to conduct electricity; a group of wire strandsbundled or twisted together as a functional unit.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 40/55
Electricity and Electronics Topic 6 – Electrical Wiring
32
Act ivity 1 – Working wi th Electr ical Wire
Objective
When you have completed this activity, you will have the knowledge and skills toprepare electrical wire for a circuit.
You will be able to:
• cut electrical wire to length
• route wire through rigid conduit
• strip off insulation from the wire ends
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 41/55
Electricity and Electronics Topic 6 – Electrical Wiring
33
Act ivity 2 – Connecting an On/Off L ight Circuit
Objective
When you have completed this activity, you will have the knowledge and skills towire and test an on/off light circuit.
You will be able to:
• connect electrical wiring to an on/off switch and a light fixture
• use a multimeter to check your wiring and switch operation.
• install a switch and light fixture in electrical boxes.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 42/55
Electricity and Electronics Topic 6 – Electrical Wiring
34
Act ivity 3 – Connecting a Branch Circuit
Objective
When you have completed this activity, you will have the knowledge and skills towire and test a branch circuit.
You will be able to:
• connect a branch circuit with switches, duplex receptacles, and a lamp.
• use a multimeter to check your wiring and circuit operation.
• distinguish between a hot wire and a hot white wire.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 43/55
Electricity and Electronics Topic 6 – Electrical Wiring
35
Act ivity 4 – Connecting a Three-Way Swi tch Circuit
Objective
When you have completed this activity, you will have the knowledge and skills toconnect and operate a three-way electrical switch circuit.
You will be able to:
• explain the difference between an on/off switch and a three-way switch.
• connect and demonstrate a three-way switching circuit.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 44/55
Electricity and Electronics Topic 6 – Electrical Wiring
36
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 45/55
Electricity and Electronics Topic 7– Sensors
37
TOPIC 7– SENSORS
Objective
When you have completed this topic, you will be able to explain and demonstratethe operation of several types of sensors as well as typical applications.
Overview
In this topic, you’ll be introduced to several types of sensors: the plunger switch, themagnetic sensor, the vibration sensor, the photoelectric sensor, and the infraredmotion detector. You’ll connect the sensors in circuits to demonstrate theiroperation in practical applications.
New Terms and Words
infrared light outside the visible spectrum at its red end. Infraredlight has a wavelength between about 700 nanometers and1 millimeter.
sensors devices that receive and respond to a stimulus or signal.
stimulus something that causes a response.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 46/55
Electricity and Electronics Topic 7– Sensors
38
Act ivity 1 – Mechanical Sensors
Objective
When you have completed this activity, you will have the knowledge and skills to
wire and operate mechanical sensor circuits.
You will be able to:
• connect a plunger switch circuit.
• connect a magnetic sensor circuit.
• connect and operate a vibration sensor circuit.
• demonstrate the operation of mechanical sensors in a practical application.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 47/55
Electricity and Electronics Topic 7– Sensors
39
Act iv ity 2 – Non-Contact Sensors
Objective
When you have completed this activity, you will have the knowledge and skills to
use infrared sensors.
You will be able to:
• set up and operate an infrared beam sensor circuit.
• set up and operate an infrared motion detector.
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 48/55
Electricity and Electronics Topic 7– Sensors
40
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 49/55
APPENDICES
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 50/55
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 51/55
Electricity and Electronics Appendix A – Safety
A-1
Appendix A – Safety
Safety is everyone’s responsibility. All must cooperate to create the safest possibleworking environment. Remember that there is potential for harm in any work area.Follow the common sense safety rules presented in the courseware and by yourinstructor.
Any environment can be hazardous when it is unfamiliar. The Tech-Worldlaboratory may be a new environment to you. Make sure you use the equipment inthe manner intended by the manufacturer. Your instructor will provide thenecessary introduction to the learning environment and the equipment.
Here are some basic rules that you should make part of your everyday Tech-WorldCELL routine.
• Make sure your behavior is appropriate to the workplace. (No clowning.)
• Avoid loose-fitting clothing, jewelry, or other items that could get caught inthe equipment.
• Report any injuries to the instructor.
• Keep areas clean and uncluttered.
• Familiarize yourself with proper equipment operation and procedures.
• Obey all other safety rules set forth by your school, instructor, and equipment
manufacturers.
==============
WARNING! The cables and accessories supplied with a specific Lab-Volt trainingsystem or module have been carefully selected, in regard to severaltechnical aspects, to ensure that the Lab-Volt equipment is safe for theend users (i.e. instructors, students, etc.). Never use these cables andaccessories with other Lab-Volt training systems or modules, or withequipment from any other manufacturer, unless otherwise specified in
Lab-Volt course material.==============
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 52/55
Electricity and Electronics Appendix A – Safety
A-2
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 53/55
Electricity and Electronics Appendix B – Internet Resources
B-1
Appendix B – Internet Resources
You are encouraged to access the following websites on the Internet to expand yourreference base and to explore career opportunities. These sites were valid at thetime of printing, but are subject to change by their owners at any time.
The Institute of Electrical and Electronics Engineers (IEEE) is a professionalassociation that offers a variety of publications and services. Student membershipsare available.
www.ieee.org
At theNational Electrical Code Internet Connection, students can consult theproper code references for any electrical project.
www.mikeholt.com/
Cheap Master Electrician provides online help for residential and commercialelectrical projects at the repair, upgrade, and design levels.
http://valleye.speed1.net
Great Lakes Pressoffers books, links, and other information related toprofessional engineering licenses and exams.
www.glpbooks.com/
Students can browse through technical job descriptions and find help with creatinga resume and finding a job at the following sites:
www.tech-lease.com/ TLI Technical Employmentwww.careermosaic.com Career Mosaic
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 54/55
Electricity and Electronics Appendix B – Internet Resources
B-2
7/28/2019 37190-E0 Electricity&Electronics CG ED2 PR1
http://slidepdf.com/reader/full/37190-e0-electricityelectronics-cg-ed2-pr1 55/55