The University of Utah FACILITIES MANAGEMENT – FACILITIES BUSINESS SERVICES

V. Randall Turpin University Services Building 1795 E. South Campus Drive, Room 201

Salt Lake City, Utah 84112-9403 Phone (801) 581-4707 FAX (801) 581-6081

3.0 DFCM REQUIREMENTS

3.3 ARCHITECTURAL

DETAIL DRAWINGS

DFCM DESIGN MANUAL UNIVERSITY OF UTAH SUPPLEMENT

June 15, 2012

Design Requirements – 3.3 Architecture Detail Drawings – University of Utah Supplement 2

PREFACE

REVISIONS SUMMARY for the University of Utah Supplement:

REVISION DATE LOCATION SUMMARY OF CHANGE 15 June 2012 ARCH-13 Emergency Phone Drawing. Removed detail

06 January 2012 - - -

University Design Standards. The former University Design Standards Chapters 1through 12 have been reformatted and re-issued as the University of Utah Supplement to the DFCM Design Manual. Most of Chapter 1is included in the “Design Process” supplement while other chapters have become supplemental text in the “Design Requirements” volume.

06 January 2012

HR-RMP HR-CAP HR-PAk HR-PPR HR-STR

Handrail Detail Drawings. Removed ARCH-10, ARCH-11, ARCH-12, and ARCH-14. Added 5 new handrail details.

25 January 2011 ARCH-16 Bike Rack. Removed – (see Bike Rack 3.9.3 in Chapter 3 [refer to U

of U Supplement 4.0 Landscape & Irrigation Standards – Site Furniture])

02 July 2010 ARCH-20

Foundation Drain Detail. Removed – (see 3.3 / M. / 077120 Fluid Applied Waterproofing System in U of U Supplement for replacement detail drawing)

GENERAL INTRODUCTION TO THE UNIVERSITY OF UTAH SUPPLEMENT:

The DFCM Design Manual “Design Requirements” (State of Utah, Department of Administrative Services, Division of Facilities Construction and Management, referred to herein as “DFCM Manual” or “Manual”) dated June 11, 2009 including highlighted updates is the basis for A/E design services provided for all University of Utah projects.

This document accepts the DFCM Manual as the University of Utah standard, and supplements the Manual with requirements which are needed to satisfy University organization and mission objectives.

PREFACE University of Utah Supplement

Design Requirements – 3.3 Architecture Detail Drawings – University of Utah Supplement 3

3.0 DFCM REQUIREMENTS 3.3 Architecture Drawing Details 3.3 Architecture Drawing Details

DRAWING NUMBER TITLE / DESCRIPTION ARCH-1 One Hour Fire Rated 3-5/8" Steel Stud Partition @ Corridors ARCH-2 Typical Hollow Steel Door Jamb 3-5/8" Stud Wall ARCH-3 Cabinet for Pilferable Supplies ARCH-4 Typical Custodial Closet Layout ARCH-5 Typical Custodial Closet Section View ARCH-6 Urinal Partition Anchor Plate Details ARCH-7 Dumpster Enclosure Plan ARCH-8 Dumpster Enclosure Section ARCH-9 Dumpster Enclosure Section

ARCH-10 Removed ARCH-11 Removed ARCH-12 Removed ARCH-13 Removed ARCH-14 Removed ARCH-15 Bollard Detail ARCH-16 Removed (see 4.0 Landscape & Irrigation Standards – Site Furniture) ARCH-17 Line Post Fence Detail ARCH-18 Line Post Cap Fence Detail ARCH-19 Corner/Pull Post Fence Detail

HR-RMP Typical Handrail at Ramp Details HR-CAP Typical Handrail Cap Details HR-PAk Typical Post Anchoring Detail HR-PPR Typical Pipe Handrail Profile Details HR-STR Typical Stair Handrail Details

DESIGN REQUIREMENTS University of Utah Supplement

3.0 DFCM REQUIREMENTS

[Academic use only] ...\DGN\DETAILS\ARCH\ARCH-2.dgn 1/20/2004 11:42:36 AM

[Academic use only] N:\DGN\DETAILS\ARCH\ARCH-4.dgn 1/21/2004 12:27:57 PM

[Academic use only] N:\DGN\DETAILS\ARCH\ARCH-5.dgn 12/19/2003 12:31:09 PM

[Academic use only] N:\DGN\DETAILS\ARCH\ARCH-8.DGN 1/21/2004 8:56:49 AM

[Academic use only] ...\DGN\DETAILS\ARCH\ARCH-9.DGN 1/21/2004 12:00:08 PM

[Academic use only] ...\DGN\DETAILS\ARCH\ARCH-15.DGN 1/21/2004 12:15:56 PM