2.5 network services
TRANSCRIPT
F P303 COMPUTER NETWORK
NETWORK SERVICES
1 JTMK POLITEKNIK SEBERANG PERAI
NAMA NO MATRIK
MOHD FIKRI AFIQ BIN AYOB 10BIP10F2013
SITI SYAFIQAH BINTI ZULKIFLI 10DIP09F2052
ZURA ASYIKIN BINTI MOHD AZMI 10BIP10F2041
KUMARAN GURUBARAN A/L KERISNASY 10BIP10F2035
WAN NORFATIN MUNIRAH BINTI WAN AHMAD 10BIP10F2037
WEB CLIENT & SERVER
JTMK POLITEKNIK SEBERANG PERAI2
When a web client receives the IP address of a web server, the client browser uses that IP address and port 80 to request web services.
This request is sent to the server using the Hypertext Transfer Protocol (HTTP).
When the server receives a port 80 request, the server responds to the client request and sends the web page to the client.
JTMK POLITEKNIK SEBERANG PERAI3
The information content of a web page is encoded using specialized 'mark-up' languages. HTML (Hypertext Mark-up Language) is the most commonly used but others, such as XML and XHTML, are gaining popularity.
The HTTP protocol is not a secure protocol; information could easily be intercepted by other users as it is sent over the network.
In order to provide security for the data, HTTP can be used with secure transport protocols.
Requests for secure HTTP are sent to port 443. These requests require the use of https: in the
site address in the browser, rather than http:.
JTMK POLITEKNIK SEBERANG PERAI4
There are many different web servers and web clients available on the market.
The HTTP protocol and HTML make it possible for these servers and clients from many different manufactures to work together seamlessly.
FTP, CLIENTS & SERVER
JTMK POLITEKNIK SEBERANG PERAI5
In addition to web services, another common service used across the Internet is one that allows users to transfer files.
he File Transfer Protocol (FTP) provides an easy method to transfer files from one computer to another.
A host running FTP client software can access an FTP server to perform various file management functions including file uploads and downloads.
JTMK POLITEKNIK SEBERANG PERAI6
JTMK POLITEKNIK SEBERANG PERAI7
The FTP server enables a client to exchange files between devices.
It also enables clients to manage files remotely by sending file management commands such as delete or rename.
To accomplish this, the FTP service uses two different ports to communicate between client an
Requests to begin an FTP session are sent to the server using destination port 21.
Once the session is opened, the server will change to port 20 to transfer the data files.
JTMK POLITEKNIK SEBERANG PERAI8
FTP client software is built into computer operating systems and into most web browsers.
Stand-alone FTP clients offer many options in an easy-to-use GUI-based interface.
EMAIL CLIENTS & SERVER
JTMK POLITEKNIK SEBERANG PERAI9
Email is one of the most popular client/server applications on the Internet.
Email servers run server software that enables them to interact with clients and with other email servers over the network.
Each mail server receives and stores mail for users who have mailboxes configured on the mail server.
Each user with a mailbox must then use an email client to access the mail server and read these messages.
JTMK POLITEKNIK SEBERANG PERAI10
JTMK POLITEKNIK SEBERANG PERAI11
Mail servers are also used to send mail addressed to local mailboxes or mailboxes located on other email servers.
Mailboxes are identified by the format: [email protected] application protocols used in
processing email include SMTP, POP3, IMAP4.
Simple Mail Transfer Protocol (SMTP)
JTMK POLITEKNIK SEBERANG PERAI12
SMTP is used by an email client to send messages to its local email server.
The local server then decides if the message is destined for a local mailbox or if the message is addressed to a mailbox on another server.
If the server has to send the message to a different server, SMTP is used between the two servers as well. SMTP requests are sent to port 25.
Post Office Protocol (POP3)
JTMK POLITEKNIK SEBERANG PERAI13
A server that supports POP clients receives and stores messages addressed to its users.
When the client connects to the email server, the messages are downloaded to the client.
By default, messages are not kept on the server after they have been accessed by the client.
Clients contact POP3 servers on port 110.
Internet Message Access Protocol (IMAP4)
JTMK POLITEKNIK SEBERANG PERAI14
A server that supports IMAP clients also receives and stores messages addressed to its users.
However, it keeps the messages in the mailboxes on the server, unless they are deleted by the user.
The most current version of IMAP is IMAP4 which listens for client requests on port 143.
Many different email servers exist for the various network operating system platforms.
JTMK POLITEKNIK SEBERANG PERAI15
JTMK POLITEKNIK SEBERANG PERAI16
An email client connects to the email server to download and view messages.
Most email clients can be configured to use either POP3 or IMAP4 depending on the email server where the mailbox is located. Email clients must also be able to send email to the server using SMTP.
Different email servers can be configured for incoming and outgoing mail.
JTMK POLITEKNIK SEBERANG PERAI17
The following are typical entries when configuring an email client:
POP3 or IMAP4 Server nameSMTP Server nameUsername User passwordSPAM and Virus filters
The graphic shows the basic setup of a POP3 and SMTP email account using Microsoft Outlook.
JTMK POLITEKNIK SEBERANG PERAI18
Post Office Protocol (POP) is an application-
layer Internet standard protocol used by local e-mail clients to retrieve email from a remote server over a TCP/IP connection.
IMAP4 protocol uses port 25 Simple Mail Transfer Protocol (SMTP) to send messages, but an IMAP4 server uses port 143 to listen for messages. IMAP4 allows you to store your messages by default on the server, instead of downloading them locally.
JTMK POLITEKNIK SEBERANG PERAI19
CONFIGURE Method : Microsoft Office Outlook 2007 Start Outlook. On the Tools menu, click Account Settings. Click New. Click Microsoft Exchange, POP3, IMAP, or HTTP, and then
click Next. In the Auto Account Setup dialog box, click to select the Manually
configure server settings or additional server types check box, and then click Next.
Click Internet E-Mail, and then click Next. In the Server Information section, select IMAP for Account Type.
JTMK POLITEKNIK SEBERANG PERAI20CONTINUE…….
In the Your Name box, enter your name exactly as you want it to appear to recipients.
In the E-mail Address box, type your e-mail address. In the User Name box, type your account name. In the Password box, type your password. In the Incoming mail server box, type the name of your IMAP4
server. In the Outgoing mail server (SMTP) box, type the name of your
SMTP server.
Note IMAP4 is a retrieval protocol. You must have SMTP to send your messages.
Click Next after you have completed entering this configuration information, and then click Finish.
JTMK POLITEKNIK SEBERANG PERAI21