2156983f cia hallmor inc-4 webcast
TRANSCRIPT
2156983F CIA Hallmor Inc-4 WEBCASTWEBCAST AUCTION OF COMPLETE CNC
AND CONVENTIONAL MACHINE SHOP, HAAS CNC MACHINERY (TO 2012), ENGINE
LATHES TO 240”, BORING MILLS,
TOOLROOM MACHINERY, TOOLING, FARO ARM, FORKLIFTS, TRUCKS AND SUPPORT EQUIPMENT
WEBCAST AUCTION OF COMPLETE CNC AND CONVENTIONAL MACHINE SHOP, HAAS CNC MACHINERY (TO 2012), ENGINE LATHES TO 240”, BORING MILLS,
TOOLROOM MACHINERY, TOOLING, FARO ARM, FORKLIFTS, TRUCKS AND SUPPORT EQUIPMENT See Instructions on Page 4
To Become a Qualified Bidder on the Internet
SALE DATE: WEDNESDAY, SEPTEMBER 15TH, STARTING AT 10:00 AMSALE DATE: WEDNESDAY, SEPTEMBER 15TH, STARTING AT 10:00 AM INSPECTION: Day Prior from 10:00 AM to 4:00 PM or by appointment with [email protected]
HALLMOR, INC.HALLMOR, INC. 531 McMurray Road – Bethel Park (Pittsburgh), Pennsylvania 15102
10 Miles south of Pittsburgh, PA
Owner Retiring
20” / 26” X 288” Poreba TPK 80/90A Gap Bed Lathe 2017 and 2011 Chevy and Ford Trucks
4’ Faro Model Cam 2 Portable CMM ARM
14” X 30” Haas Model TL-1 CNC Toolroom Lathe
Hass Model VF-1 CNC Vertical Machining Center
LOW MILES
288” Capacity
NEW 2012
NEW 2006
NEW 2011
CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers | appraisers | since 1961 | cia-auction.com | [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760
2156983F CIA Hallmor Inc-4 WEBCAST 8/19/21 6:42 AM Page 1
WEDNESDAY, SEPTEMBER 15TH – 10:00 AMWEDNESDAY, SEPTEMBER 15TH – 10:00 AM
Daewoo Model DMV-500 “Diamond Series CNC Vertical Machining Center
Morrison Keyseater Haas Model HS-1 CNC Horizontal Machining Center
12” X 48” Thompson Surface Grinder Rockford Single Point Planer Mill
Large Quantity of Various Inspection Equipment 4’ Faro Model Cam 2 Portable CMM ARM
4” G&L Type 340T Horizontal Boring Mill
4” TOS Type W100 Horizontal Boring Mill
14” X 152” Lehman “Hydrotral” Engine Lathe
20” / 26” X 288” Poreba TPK 80/90A Gap Bed Lathe
CNC MACHINES Daewoo Model DMV-500 “Diamond Series CNC Vertical Machining Center; S/N AV5500388, Fanuc 18-M Controls, 19-3/4” X 42-1/4” Table, 1,020 MM X-Travel, 500mm Y-Travel, 510mm Z-Travel, Drilled and Tapped Sub- Plate, 40 Toper Spindle, Oil Kooler, 30 Position ATC, Spindle Rebuilt in 2013 *With Replaced Bearings and Seals – Replaced Drawbar at $9,100.00 (1998)
SMW Model RT-275 4th Axis Indexer; S/N 20, System 50 Controller
Hass Model VF-1 CNC Vertical Machining Center; S/N 1094247, 40 Taper Spindle, 16” X 26” Table,
20 Position ATC, 30 HP, 10,00 RPM, 508mm X-Travel, 406mm Y-Travel, 508MM Z-Travel, Rigid Tapping, Thru-Spindle Coolant (2012)
Haas Model HS-1 CNC Horizontal Machining Center; S/N 50299, 40 Taper Spindle, 24 Position ATC, 12” X 12” X 16” Tombstones (1997)
14” X 30” Haas Model TL-1 CNC Toolroom Lathe; S/N 307585
Mazak Model Slant / Turn 30- Univeral 1500 Turning Center; S/N 42966, 12” 3-Jaw Chuck, Tailstock, 12” Swing, 40” Between Centers
Approx. (150) 40 Taper Toolholders
LATHES 20” / 26” X 288” Poreba TPK 80/90A Gap Bed Lathe; S/N 1179-565, 31-1/2” 4-Jaw Chuck, 3- 3/4” Spindle Hole, Steady Rests, Tailstock, Newall DP700 DRO
14” X 152” Lehman “Hydrotral” Engine Lathe; S/N 573, 2” Spindle Hole, 10-320 RPM, 24” 4-Jaw Chuck, Steady Rest, Newall DP700 DRO
14” X 112” Lodge and Shipley Engine Lathe; 24” 4-Jaw Chuck, Steady Rest, Tailstock
8” X 96” Leblond “Regal” Lathe; S/N 5C-706, 12” 4-Jaw Chuck, Steady Rests, Tailstock
6-1/2” X 48” Enco Toolroom Lathe; S/N 940162, 8” 3-Jaw
Chuck, 35-1,800 RPM, Tailstock, Platinum Plus DRO
TOOLROOM MACHINERY 4 HP Bridgeport Series II Vertical Mill; S/N 229027, 9” x 48’ Table, Power Table and Knee Feeds, Mitutoyo DRO
2 HP Bridgport Series I Vertical Mill; S/N 229027, 9” x 48” Table, Power Table and Knee Feeds, Mitutoyo DRO
2 HP Bridgeport EZ-Table Vertical Mill; S/N 260023, 9” X 42” Table
9” X 14” Summit Model 250M Horizontal Band Saw 16” Doall Model ML Vertical
NEW 2011
288” Capacity
2156983F CIA Hallmor Inc-4 WEBCAST 8/19/21 6:42 AM Page 2
HALLMOR, INC.HALLMOR, INC.
Summit Model 250-M Horizontal Band Saw300 Ton (Est.) Floor Type Horizontal Hydraulic Press 8” X 96” Leblond “Regal” Lathe
20,000 Lb. and 6,000 Lb. Hyster Lift Trucks
Various Bearings
Large Quantity of Perishable Tooling Including Gun Drills, Endmills, Boring Bars and More
2007 Chevy Silverado 2500 HD 4x4 Pick-Up
Hydraulic Pumps and Cylinders Supfina Roll Finisher
Band Saw, 25” X 25” Table Sunnen Model 666 Honing Machine; S/N 6462
Trinco Model 48/24 SL-BP Abrasive Blast Cabinet 30” X 20” Trinco Abrasive Blast Cabinet Sterling Model 510 Drill Pointer
WELDERS & RELATED Miller Syncrowave 351 Mig Welder 600 Amp Miller MP65 Mig Welder with 30A Wire Feed Miller XMT-350 CC/CV Weld Power Source with Miller Suitcase X-Treme 12 VS Wire Feed 650 Amp Lincoln TM-650/650 Arc Welder 2,000 Lb. (Est.) 4-Jaw Motorized Welding Positioner Large Quantity of Welding Related Including; 48” X 90” HD Welding Table, Weld Wire and Rod, Clamps of Various Types and Sizes
BORING MILLS 4” TOS Type W100 Horizontal Boring Mill; S/N 02-11, 49” X 49” T-Slotted Rotary Table, 50 Taper Spindle, DP700 DRO
90mm Ayce Type 9004 Horizontal Boring Mill; S/N 622, 39” X 59” T-Slotted Rotary Table, 40 Taper Spindle, DP700 DRO, 12- 1,000 RPM, Min / Max Height of
Spindle Over Table, 0-1,000M
4” G&L Type 340T Horizontal Boring Mill; S/N 6766, 40 Taper Spindle, 36” X 74” Table, 15 HP, 7.5-450 RPM Main, 25-1,500 RPM
OTHER EQUIPMENT Morrison Keyseater; S/N K803689, 24” X 27” Table, Large Quantity Of Various Size Dies
300 Ton (Est.) Floor Type Horizontal Hydraulic Wheel Press; 48” Wide X 16’ Long Frame, Adjustment Pins 12” O.C., 10” Diameter Ram, Approximately 12” Stroke, 5 Hp Hydraulic Unit
12” X 48” Thompson Surface Grinder; S/N 4B646900, 1.5” Grinding Wheel
26” Swing/30 HP Bullard Vertical Turret Lathe; 5-Position Turret, 34” 3-Jaw Chuck, 24” Under Rail
3” X 20” O.D. Grinder 20” X 150” Norton O.D. Grinder; S/N 20585, 2” Wheel
Rockford Single Point Planer Mill; S/N 81-OG-35, 32” X 120” Table, 40” Under Rail, 40 Hp
Despatch Model FC Hi-45 Electric Furnace; S/N 113526-L, 1350°F Max. Temp., 17 KW, 19” X 24” X 20” Inside Dimensions
Toledo Model 999 Pipe Threader (10) Various Size Grinders By: Hammond, Delta, Porter-Cable, Engelberg, Cincinnati, Darex And Others
Various Size Electric Chain Hoist Up To 3 Ton With Bridges And Floor Jib
ROLLING STOCK 2017 Chevy 2500 Hd 4x4 Pick- Up Truck; VIN: 1GCOKUEGHZ229844, 60 L Vortec Gas Engine, 8’ Bed, Zeibart Bed Liner, 9500 Lb. Guwr With H.D. Suspension And Leaf Springs, 18” Tips 22,770 Miles
2011 Ford F550XL Super Duty Straight Truck; VIN: 1FDUF5GY4BECO5542, 8’ X 16’ Bed (Wood), 18, Guwr, 6.8 L Gas Engine, 45,119 Miles
2007 Chevy Silverado 2500 HD 4x4 Pick-Up; VIN: 1GCHK24U87E199737, 8’ Bed, 6.0l Vortec Gas Engine, With 90” Snow Plow Attachment, 134,961 Miles
LIFT TRUCKS 20,000 Lb. Hyster Model H 200ES LP Gas Solid (Form Filled) Tires Lift Truck; S/N B007PO-887V, 2-Stage Mast, 146” Lift Height, 60” Forks, 122” Mast Height, Truck Weight 24,900 Lb.
6,000 Lb. Hyster Model H60f LP Gas Solid (Form Filled) Tires Lift Truck; S/N L177B092130, Stage Mast, 181” Lift Height, 86” Mast Height, 48” Forks, Side Shift, Monotrol
INSPECTION 4’ Faro Model Cam 2 Portable CMM Arm; S/N F04-B2-11-09538, Revision 28.1, Single Point (Max- Min)/2 Specification = F04-B20 .018
Mm (0.0007”), Volumetric (Max Deviation) Specification = F04b2+/- 0.025mm (+/- 0.001”) With Dell Laptop And Hard Shell Case (2011)
Other Inspection Including: Phase Ii Model Pht-1800 Portable Hardness Tester, Centech Digital Video Inspection Camera, Bergen Instruments Model 140bu Transit- Level, Large Quantity Of Various Size O.D. Micrometer, Height Gages, Gage Blocks, Depth Gage, Wilson 4jr Hardness Tester And Other Related Items
MACHINE ACCESSORIES- PERISHABLE TOOLING Large Quantity Of Items Including: Andrea Adjustable Boring Head, Climax Model 65 Portable Keyway Cutter, True Trace Attachment, Various Size Rotary Tables, Kurt Mills Vises, Right Angle Attachments, Hold Down Hardness, 5 Card R8 Collets, Various Size Tool Post Grinders: Large Assortment Of Drills, Taps, End Mills And Other Related Items
SHOP EQUIPMENT Assorted Items Including: Mag Base Drills, Milwaukee And Other Power Tools, Pneumatic Tools, Pressure Washer, Ladders, Oxy/Acetylene Outfits, Benches, Tables, Nylon Slings, Tables, Shelving And Other
26” Swing/30 HP Bullard Vertical Turret Lathe
Miller XMT-350 CC/CV Weld Power Source with Miller Suitcase X- Treme 12 VS Wire Feed
4 HP Bridgeport Series II Vertical Mill
2 HP Bridgport Series I Vertical Mill
2156983F CIA Hallmor Inc-4 WEBCAST 8/19/21 6:43 AM Page 3
FIRST CLASS MAIL!
Important Mail TO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL
All equipment described herein will be sold “as is”, “where is” to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier’s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of pur- chase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website.
18% BUYERS PREMIUM IN EFFECT FOR ALL PURCHASES
TERMS OF SALE
HALLMOR, INC.
Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail them- selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure.
IMPORTANT NOTICE:
Owner Retiring
10 Miles south of Pittsburgh, PA
(3) Low Mileage Trucks(3) Low Mileage Trucks(3) Low Mileage Trucks
Large Capacity LathesLarge Capacity LathesLarge Capacity Lathes
CNC LatheCNC LatheCNC Lathe
HALLMOR, INC. Owner Retiring
HALLMOR, INC. 531 McMurray Road
Bethel Park (Pittsburgh), Pennsylvania 15102 10 Miles south of Pittsburgh, PA
SALE DATE: Wed., September 15th
STARTING: 10:00 AM INSPECTION:
Day Prior from 10:00 AM to 4:00 PM or by appointment with [email protected]
CINCINNATI INDUSTRIAL AUCTIONEERS
Contact Information 2020 Dunlap St. Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760 www.cia-auction.com
Cincinnati Industrial Auctioneers – License No. AY002219
Jeffrey L. Luggen – License No. AU003274R Joseph M. Luggen – License No. AU005954
AUCTIONEERS
BIDDER INSTRUCTIONS All bidders must register for this auction at
www.bidspotter.com. Please register 24-hours in advance to get through approval process.
Sale Under The Management Of
CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers | appraisers | since 1961 | cia-auction.com | [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760
TOOLROOM MACHINERY, TOOLING, FARO ARM, FORKLIFTS, TRUCKS AND SUPPORT EQUIPMENT
WEBCAST AUCTION OF COMPLETE CNC AND CONVENTIONAL MACHINE SHOP, HAAS CNC MACHINERY (TO 2012), ENGINE LATHES TO 240”, BORING MILLS,
TOOLROOM MACHINERY, TOOLING, FARO ARM, FORKLIFTS, TRUCKS AND SUPPORT EQUIPMENT See Instructions on Page 4
To Become a Qualified Bidder on the Internet
SALE DATE: WEDNESDAY, SEPTEMBER 15TH, STARTING AT 10:00 AMSALE DATE: WEDNESDAY, SEPTEMBER 15TH, STARTING AT 10:00 AM INSPECTION: Day Prior from 10:00 AM to 4:00 PM or by appointment with [email protected]
HALLMOR, INC.HALLMOR, INC. 531 McMurray Road – Bethel Park (Pittsburgh), Pennsylvania 15102
10 Miles south of Pittsburgh, PA
Owner Retiring
20” / 26” X 288” Poreba TPK 80/90A Gap Bed Lathe 2017 and 2011 Chevy and Ford Trucks
4’ Faro Model Cam 2 Portable CMM ARM
14” X 30” Haas Model TL-1 CNC Toolroom Lathe
Hass Model VF-1 CNC Vertical Machining Center
LOW MILES
288” Capacity
NEW 2012
NEW 2006
NEW 2011
CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers | appraisers | since 1961 | cia-auction.com | [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760
2156983F CIA Hallmor Inc-4 WEBCAST 8/19/21 6:42 AM Page 1
WEDNESDAY, SEPTEMBER 15TH – 10:00 AMWEDNESDAY, SEPTEMBER 15TH – 10:00 AM
Daewoo Model DMV-500 “Diamond Series CNC Vertical Machining Center
Morrison Keyseater Haas Model HS-1 CNC Horizontal Machining Center
12” X 48” Thompson Surface Grinder Rockford Single Point Planer Mill
Large Quantity of Various Inspection Equipment 4’ Faro Model Cam 2 Portable CMM ARM
4” G&L Type 340T Horizontal Boring Mill
4” TOS Type W100 Horizontal Boring Mill
14” X 152” Lehman “Hydrotral” Engine Lathe
20” / 26” X 288” Poreba TPK 80/90A Gap Bed Lathe
CNC MACHINES Daewoo Model DMV-500 “Diamond Series CNC Vertical Machining Center; S/N AV5500388, Fanuc 18-M Controls, 19-3/4” X 42-1/4” Table, 1,020 MM X-Travel, 500mm Y-Travel, 510mm Z-Travel, Drilled and Tapped Sub- Plate, 40 Toper Spindle, Oil Kooler, 30 Position ATC, Spindle Rebuilt in 2013 *With Replaced Bearings and Seals – Replaced Drawbar at $9,100.00 (1998)
SMW Model RT-275 4th Axis Indexer; S/N 20, System 50 Controller
Hass Model VF-1 CNC Vertical Machining Center; S/N 1094247, 40 Taper Spindle, 16” X 26” Table,
20 Position ATC, 30 HP, 10,00 RPM, 508mm X-Travel, 406mm Y-Travel, 508MM Z-Travel, Rigid Tapping, Thru-Spindle Coolant (2012)
Haas Model HS-1 CNC Horizontal Machining Center; S/N 50299, 40 Taper Spindle, 24 Position ATC, 12” X 12” X 16” Tombstones (1997)
14” X 30” Haas Model TL-1 CNC Toolroom Lathe; S/N 307585
Mazak Model Slant / Turn 30- Univeral 1500 Turning Center; S/N 42966, 12” 3-Jaw Chuck, Tailstock, 12” Swing, 40” Between Centers
Approx. (150) 40 Taper Toolholders
LATHES 20” / 26” X 288” Poreba TPK 80/90A Gap Bed Lathe; S/N 1179-565, 31-1/2” 4-Jaw Chuck, 3- 3/4” Spindle Hole, Steady Rests, Tailstock, Newall DP700 DRO
14” X 152” Lehman “Hydrotral” Engine Lathe; S/N 573, 2” Spindle Hole, 10-320 RPM, 24” 4-Jaw Chuck, Steady Rest, Newall DP700 DRO
14” X 112” Lodge and Shipley Engine Lathe; 24” 4-Jaw Chuck, Steady Rest, Tailstock
8” X 96” Leblond “Regal” Lathe; S/N 5C-706, 12” 4-Jaw Chuck, Steady Rests, Tailstock
6-1/2” X 48” Enco Toolroom Lathe; S/N 940162, 8” 3-Jaw
Chuck, 35-1,800 RPM, Tailstock, Platinum Plus DRO
TOOLROOM MACHINERY 4 HP Bridgeport Series II Vertical Mill; S/N 229027, 9” x 48’ Table, Power Table and Knee Feeds, Mitutoyo DRO
2 HP Bridgport Series I Vertical Mill; S/N 229027, 9” x 48” Table, Power Table and Knee Feeds, Mitutoyo DRO
2 HP Bridgeport EZ-Table Vertical Mill; S/N 260023, 9” X 42” Table
9” X 14” Summit Model 250M Horizontal Band Saw 16” Doall Model ML Vertical
NEW 2011
288” Capacity
2156983F CIA Hallmor Inc-4 WEBCAST 8/19/21 6:42 AM Page 2
HALLMOR, INC.HALLMOR, INC.
Summit Model 250-M Horizontal Band Saw300 Ton (Est.) Floor Type Horizontal Hydraulic Press 8” X 96” Leblond “Regal” Lathe
20,000 Lb. and 6,000 Lb. Hyster Lift Trucks
Various Bearings
Large Quantity of Perishable Tooling Including Gun Drills, Endmills, Boring Bars and More
2007 Chevy Silverado 2500 HD 4x4 Pick-Up
Hydraulic Pumps and Cylinders Supfina Roll Finisher
Band Saw, 25” X 25” Table Sunnen Model 666 Honing Machine; S/N 6462
Trinco Model 48/24 SL-BP Abrasive Blast Cabinet 30” X 20” Trinco Abrasive Blast Cabinet Sterling Model 510 Drill Pointer
WELDERS & RELATED Miller Syncrowave 351 Mig Welder 600 Amp Miller MP65 Mig Welder with 30A Wire Feed Miller XMT-350 CC/CV Weld Power Source with Miller Suitcase X-Treme 12 VS Wire Feed 650 Amp Lincoln TM-650/650 Arc Welder 2,000 Lb. (Est.) 4-Jaw Motorized Welding Positioner Large Quantity of Welding Related Including; 48” X 90” HD Welding Table, Weld Wire and Rod, Clamps of Various Types and Sizes
BORING MILLS 4” TOS Type W100 Horizontal Boring Mill; S/N 02-11, 49” X 49” T-Slotted Rotary Table, 50 Taper Spindle, DP700 DRO
90mm Ayce Type 9004 Horizontal Boring Mill; S/N 622, 39” X 59” T-Slotted Rotary Table, 40 Taper Spindle, DP700 DRO, 12- 1,000 RPM, Min / Max Height of
Spindle Over Table, 0-1,000M
4” G&L Type 340T Horizontal Boring Mill; S/N 6766, 40 Taper Spindle, 36” X 74” Table, 15 HP, 7.5-450 RPM Main, 25-1,500 RPM
OTHER EQUIPMENT Morrison Keyseater; S/N K803689, 24” X 27” Table, Large Quantity Of Various Size Dies
300 Ton (Est.) Floor Type Horizontal Hydraulic Wheel Press; 48” Wide X 16’ Long Frame, Adjustment Pins 12” O.C., 10” Diameter Ram, Approximately 12” Stroke, 5 Hp Hydraulic Unit
12” X 48” Thompson Surface Grinder; S/N 4B646900, 1.5” Grinding Wheel
26” Swing/30 HP Bullard Vertical Turret Lathe; 5-Position Turret, 34” 3-Jaw Chuck, 24” Under Rail
3” X 20” O.D. Grinder 20” X 150” Norton O.D. Grinder; S/N 20585, 2” Wheel
Rockford Single Point Planer Mill; S/N 81-OG-35, 32” X 120” Table, 40” Under Rail, 40 Hp
Despatch Model FC Hi-45 Electric Furnace; S/N 113526-L, 1350°F Max. Temp., 17 KW, 19” X 24” X 20” Inside Dimensions
Toledo Model 999 Pipe Threader (10) Various Size Grinders By: Hammond, Delta, Porter-Cable, Engelberg, Cincinnati, Darex And Others
Various Size Electric Chain Hoist Up To 3 Ton With Bridges And Floor Jib
ROLLING STOCK 2017 Chevy 2500 Hd 4x4 Pick- Up Truck; VIN: 1GCOKUEGHZ229844, 60 L Vortec Gas Engine, 8’ Bed, Zeibart Bed Liner, 9500 Lb. Guwr With H.D. Suspension And Leaf Springs, 18” Tips 22,770 Miles
2011 Ford F550XL Super Duty Straight Truck; VIN: 1FDUF5GY4BECO5542, 8’ X 16’ Bed (Wood), 18, Guwr, 6.8 L Gas Engine, 45,119 Miles
2007 Chevy Silverado 2500 HD 4x4 Pick-Up; VIN: 1GCHK24U87E199737, 8’ Bed, 6.0l Vortec Gas Engine, With 90” Snow Plow Attachment, 134,961 Miles
LIFT TRUCKS 20,000 Lb. Hyster Model H 200ES LP Gas Solid (Form Filled) Tires Lift Truck; S/N B007PO-887V, 2-Stage Mast, 146” Lift Height, 60” Forks, 122” Mast Height, Truck Weight 24,900 Lb.
6,000 Lb. Hyster Model H60f LP Gas Solid (Form Filled) Tires Lift Truck; S/N L177B092130, Stage Mast, 181” Lift Height, 86” Mast Height, 48” Forks, Side Shift, Monotrol
INSPECTION 4’ Faro Model Cam 2 Portable CMM Arm; S/N F04-B2-11-09538, Revision 28.1, Single Point (Max- Min)/2 Specification = F04-B20 .018
Mm (0.0007”), Volumetric (Max Deviation) Specification = F04b2+/- 0.025mm (+/- 0.001”) With Dell Laptop And Hard Shell Case (2011)
Other Inspection Including: Phase Ii Model Pht-1800 Portable Hardness Tester, Centech Digital Video Inspection Camera, Bergen Instruments Model 140bu Transit- Level, Large Quantity Of Various Size O.D. Micrometer, Height Gages, Gage Blocks, Depth Gage, Wilson 4jr Hardness Tester And Other Related Items
MACHINE ACCESSORIES- PERISHABLE TOOLING Large Quantity Of Items Including: Andrea Adjustable Boring Head, Climax Model 65 Portable Keyway Cutter, True Trace Attachment, Various Size Rotary Tables, Kurt Mills Vises, Right Angle Attachments, Hold Down Hardness, 5 Card R8 Collets, Various Size Tool Post Grinders: Large Assortment Of Drills, Taps, End Mills And Other Related Items
SHOP EQUIPMENT Assorted Items Including: Mag Base Drills, Milwaukee And Other Power Tools, Pneumatic Tools, Pressure Washer, Ladders, Oxy/Acetylene Outfits, Benches, Tables, Nylon Slings, Tables, Shelving And Other
26” Swing/30 HP Bullard Vertical Turret Lathe
Miller XMT-350 CC/CV Weld Power Source with Miller Suitcase X- Treme 12 VS Wire Feed
4 HP Bridgeport Series II Vertical Mill
2 HP Bridgport Series I Vertical Mill
2156983F CIA Hallmor Inc-4 WEBCAST 8/19/21 6:43 AM Page 3
FIRST CLASS MAIL!
Important Mail TO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL
All equipment described herein will be sold “as is”, “where is” to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier’s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of pur- chase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website.
18% BUYERS PREMIUM IN EFFECT FOR ALL PURCHASES
TERMS OF SALE
HALLMOR, INC.
Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail them- selves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer’s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure.
IMPORTANT NOTICE:
Owner Retiring
10 Miles south of Pittsburgh, PA
(3) Low Mileage Trucks(3) Low Mileage Trucks(3) Low Mileage Trucks
Large Capacity LathesLarge Capacity LathesLarge Capacity Lathes
CNC LatheCNC LatheCNC Lathe
HALLMOR, INC. Owner Retiring
HALLMOR, INC. 531 McMurray Road
Bethel Park (Pittsburgh), Pennsylvania 15102 10 Miles south of Pittsburgh, PA
SALE DATE: Wed., September 15th
STARTING: 10:00 AM INSPECTION:
Day Prior from 10:00 AM to 4:00 PM or by appointment with [email protected]
CINCINNATI INDUSTRIAL AUCTIONEERS
Contact Information 2020 Dunlap St. Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760 www.cia-auction.com
Cincinnati Industrial Auctioneers – License No. AY002219
Jeffrey L. Luggen – License No. AU003274R Joseph M. Luggen – License No. AU005954
AUCTIONEERS
BIDDER INSTRUCTIONS All bidders must register for this auction at
www.bidspotter.com. Please register 24-hours in advance to get through approval process.
Sale Under The Management Of
CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers | appraisers | since 1961 | cia-auction.com | [email protected] 2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760