2016 guide productguide - welcome to concealfab...
TRANSCRIPT
©2016 ConcealFab Corporation
PRODUCTGUIDE 2016
PRODUCT
GU
IDE
2016
[email protected] N. Cascade AvenueColorado Springs, Colorado 80907
www.ConcealFab.com [email protected] P: 719.599.3400 INDEX©2016 ConcealFab Corporation
INTRODUCTIONLetter from the Company
PRODUCT PORTFOLIORange of Products
Integrated Concealment PolesIntroductionIntegrated Concealment Pole Matrix12” Smooth Poles (ION-M Radios)13” / 14.5” Fluted Monopole14” Smooth ION-ML Monopole16” Smooth Pole17” Fluted Integrated PolesOctagonal Poles
Antenna Poles
Antenna Mounting SystemsUniversal Cantenna SleevesStandard Pole-Top MountWide Diameter Pole-Top MountUniversal Side-Arm Mounting SystemDual Panel Antenna Side ArmPole-Top Extension MountsBallastad Rooftop MountDAS Pole-Top Antenna ConcealmentsCable Concealment Shrouds
Radio Shrouds & CabinetsStandard Radio Cabinet / ShroudRadio Concealment Shroud
Custom Concealment OptionsPole Top Concealments for oDAS Panel AntennaStadium / Venue ConcealmentsDecorative Lanterns and Lightenna™ Concealments
RF OptimizationPIM Mitigation Solutions – PIM Shield™Back-Lobe Suppressors
National Sales Footprint
INTR
OD
UC
TIO
NIntroduction
ConcealFab Corporation has made significant strides in the Small Cell and DAS markets during 2014 and 2015.
As the DAS and Small Cell markets have gained traction over the last three quarters, ConcealFab’s End-to-End Value Proposition helped our customers meet distinct deployment requirements AND upgrade existing sites.
We look forward to continuing this trend with our full line of integrated poles, antenna poles, mounting solutions, custom concealments, and RF optimization products. These pre-engineered infrastructure solutions are some of the most innovative and easy to deploy solutions available on the market today.
We also look forward to expanding our equipment-integration packages, by integrating radios, BBU’s, diplexers, and wiring inside poles; all while meeting strict sound and thermal restrictions. This allows for expedited zoning and code review process. At the same time, this further enhances our customers’ ability to have their unique deployments HIDE IN PLAIN SIGHT®.
Strategically, we have begun to directly partner with testing and servicing companies to provide our customers with an End-to-End Deployment package – Product, Integration, and Services. This allows us to follow the customer from purchase order through installation and maintenance; making sure that they are receiving the quality which merited us our ISO:9001 Certification. We are also cultivating OEM partnerships with Ericsson, JMA, CommScope, ALU, Amphenol, Kathrein, SOLiD, and Nokia Siemens.
Our relationships – established or emerging – are extremely important to us. We would like to thank you for choosing ConcealFab for your Small Cell or DAS projects.
1
©2016 ConcealFab Corporation
CONCEALFAB PRODUCT PORTFOLIO
2
RAN
GE
OF
PRO
DU
CTS
Range of Products to Consider
Integrated Poles
Antenna Poles
12” 14” 17” 20” Octagonal
www.ConcealFab.com [email protected] P: 719.599.34003
©2016 ConcealFab Corporation
www.ConcealFab.com [email protected] P: 719.599.3400
RAN
GE
OF
PRO
DU
CTS
Range of Products to Consider
Antenna Mounting Systems
Radio Cabinets & Shrouds
4©2016 ConcealFab Corporation
Standard Ground Radio Cabinet Pole Mounted Shroud
www.ConcealFab.com [email protected] P: 719.599.3400
RAN
GE
OF
PRO
DU
CTS
Range of Products to Consider
Custom Concealment Options
RF Optimization
5
©2016 ConcealFab Corporation
Roof-Mounted Chimney Urban Concealments Stadium Concealment
PIM Shield Back-Lobe Suppressor Back-Lobe Suppressor
www.ConcealFab.com [email protected] P: 719.599.3400
ConcealFab’s line of Integrated Concealment Poles offer sleek, aesthetically-pleasing designs, despite housing some often-bulky equipment. The poles are built using a modular configuration to maximize flexibility for the end user. Such flexibility includes accommodation for the specific equipment configurations and any thermal / sound suppression requirements. To match existing infrastructure, ConcealFab’s poles come in a range of colors, textures, and profiles. We can add lighting components and pair the pole with any number of our bracket and concealment products.
Integratedconcealment poles
6©2016 ConcealFab Corporation
www.ConcealFab.com [email protected] P: 719.599.3400
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
SIntegrated Concealment Poles
Structurally engineered to accommodate multiple RAD Centers
Integrated Equipment (RRUs, Battery Back-Up Units, Rectifiers, Diplexers, Triplexers, etc.) allows you to protect and HIDE IN PLAIN SIGHT
Tapered and Non-Tapered Poles Available
Externally-mounted and recessed meter options available
Various lighting options available to meet your unique needs
SHOWN: 17” Fluted Integrated Pole
Various Heights, Diameters and Finishes Available
Fluted and Smooth Profiles available
Cable Concealment Shroudto Hide RF cabling
Universal Antenna Mounting Systems to accommodate multiple antenna configurations
7
©2016 ConcealFab Corporation
SHOWN: 12” Smooth Pole (ION-M Radios)
12” 14” 16” - 17” 20 - 24”
www.ConcealFab.com [email protected] P: 719.599.3400
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
SMANUFACTURER/ RADIO MODEL
COMMSCOPE
ALCATEL LUCENT
ERICSSON
JMA
RRH
MCO, MRO
ION - M
ION - ML
ION - U
RRUS 11 / 12
mRRU
Teko
12” Smooth Pole 14” SmoothMonopole
13 / 14.5” Fluted Monopole
16” Smooth Pole 17” FlutedIntegrated Pole Octagonal Pole
SOLiD
City DAS
PRISM
NOKIA
Corona
Flexi Zone
Integrated Concealment Pole Matrix
8©2016 ConcealFab Corporation
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
S12” Smooth Poles (ION-M Radios)
The most compact of ConcealFab’s line of Integrated Poles, the 12” pole is a modular, stackable design to accommodate a number of radio configurations. These units were designed specifically for the CommScope ION-M radio, complete with ConcealFab’s patented sound suppression to meet jurisdictional noise requirements in addition to adequate spacing to route all necessary RF and electrical cables/wiring. ConcealFab has also designed an optional back-up power section of the same diameter.
CommScope
1'-0"
2"
0"
7'-9 14 "
15'-0 78 "
23'-2 34 "
31'-4 58 "
5'-3" (METER CL )
35'-0" ANTENNA RAD CENTER
37'-0"
16'-0"
FOUNDATION (BY OTHERS)
DIPLEXER/ SPLITTER AND ANTENNAMOUNTING SECTION
DOUBLEION SECTION(FUTURE)
DOUBLE ION SECTION
BASE SECTION W/ METER, DISCONNECT & BATTERIES
FINISH GRADE
ANTENNA - PHAZAR AWS360D-1710-7-T0-N
EXTENSION SECTION W/LUMINAIRE
STERNBERG A850SRLED OLD TOWN ACORN
LUMINAIRE, 3500K COLOR TEMPERATURE, 3660 LUMEN, 53 WATT
STERNBERG 50PM LUMINAIRE
ARM BRACKET
ORNAMENTAL BASE FASCIA
PROPRIETARY
NOTES:ION SECTION LABELED "FUTURE" WILL BE 1.MECHANICALLY COMPLETE FOR EASE OF CARRIER ADDITION AFTER INSTALLATION.FINISH; GALVANIZED PER ASTM123 AND 2.POWDER COAT BLACK SEMI-GLOSS SCALE 1:35
A
5
H
G
F
E
D
C
B
1234
H
G
F
E
D
C
B
A
4 3 2 15
By:Description:Date:Rev:
A NEW RELEASE DOC10/3/13 12" DIAMETER ION MONOPOLE X 35'
RAD CENTER
Project:
FRACTION
±1/16"
ANGLE
±1°
DECIMAL X.XX ± 0.020
X.XXX ± 0.010
DIMENSIONS ARE IN INCHES
DO NOT SCALE DWG
Consultant:
Sheet Title:
12" DIAMETER X 35'RAD CENTER
ION MONOPOLEPROPOSAL
Consultant:
001739Part Number:
3265 FILLMORE RIDGE HEIGHTS COLORADO SPRINGS, CO 80907
PHONE :719-599-3400 FAX: 719-599-0057
PROPRIETARY INFORMATIONUSE, REPRODUCTION, OR
DISCLOSURE IS SUBJECT TORESTRICTIONS SET FORTH IN
NON-DISCLOSURE AGREEMENTAND OTHER CONTRACT
DOCUMENTS PERTAINING TO THIS PROJECT
E
D
C
B
08/15/14
11/27/13
10/21/13
10/4/13
CHANGED LUMINAIRE & UPDATED
UPDATED MODEL TO DOUBLE ION SECTIONS
RE-DRAWN
ADDED ION SECTIONS
OBC
OBC
OBC
DOC
9
©2016 ConcealFab Corporation
CommScope
www.ConcealFab.com [email protected] P: 719.599.3400
13” / 14.5” Fluted Monopole
0" 7 1
2 "
1'-7 12 "
20'-5"
19'-6"
24'-3"
25'-2"
28'-2"
29'- 78 "
30'-2"
31'-5 14 "
RAD CENTER
FINISH GRADE
HATCH
AIR FLOW
0" 2" (GROUT)
17'-0"
19'-4" 19'-6"
20'-5"
21'-9"
24'-1" 24'-3"
25'-2"
26'-8"
27'-9"
AA
B
B
2X BASE ACCESS HATCH 12" H X 6.75" W CLEAR OPENING. PROVISION INSIDE POLE FOR MOUNTING GROUND BAR (BY OTHERS) AND FIBER SPLICE BOX (BY OTHERS)
ALL HATCHES SECURED WITH TAMPER RESISTANT PIN-IN-TORX HARDWARE
DECORATIVE TRANSITION SHROUD
SPACE PROVIDED FOR MOUNTING 2X COMMSCOPE ION-U RADIOS (BY OTHERS)
DIPLEXER/ SPLITTER MOUNTING AREA
FOUNDATION (INSTALLATION
BY OTHERS)
FINISH GRADE
HATCH
VENT
HATCH
VENT
HATCH
COMMSCOME QUASI-OMNI ANTENNA (BY OTHERS) LUMINAIRE & ARM, STYLE &
HEIGHT AS SPECIFIED BY CUSTOMER
INSIDE12.03
OUTSIDE13.00
SECTION A-APOLE PROFILE & APPROX. POSITION OF ION-U RADIO
SCALE 1 : 4
COMMSCOPE ION-U RADIO.
(BY OTHERS)
2X SPACE FOR ROUTING COAX, FIBER, POWER ETC.
SECTION B-BSCALE 1 : 16
SCREEN MATERIAL
SPACE FOR ROUTING AND CONNECTING
COAX, POWER, FIBER ETC.
COMMSCOPE ION-U (BY OTHERS)
AIR FLOW
NOTES:APPROXIMATE POLE WEIGHT 1000 lbs EXCLUDING CUSTOMER SUPPLIED 1.EQUIPMENT (RADIOS, ANTENNA, FIBER SPLICE BOX & ANCILLIARY EQUIPMENT).AVAILABLE IN A VARIETY OF COLORS & WITH OPTIONAL ANTI-GRAFFITI 2.COATING.OPTIONAL DECORATIVE BASE COVER CAN BE SUPPLIED AS REQUIRED.3.
A
5
H
G
F
E
D
C
B
1234
H
G
F
E
D
C
B
A
4 3 2 15
Apvd:Description:Date:Rev:
A NEW RELEASE DOC06/12/15
Project:
DIMENSIONS ARE IN INCHES
Consultant:
Sheet Title:
Consultant:
004473Part Number:
FRACTIONANGLEDECIMAL X.XX ± 0.020X.XXX ± 0.010
X ±1° X.X ± 0.5° ±1/16"
DO NOTSCALE DWG
OBC 06/12/15 DOC 06/12/15
Date:Ckd By:Date:Drawn By:
© 2014 ConcealFab Corp - All Rights ReservedPERTINENT CONTRACTUAL DOCUMENTS.IN NON-DISCLOSURE AGREEMENTS ANDIS SUBJECT TO RESTRICTIONS SET FORTHUSE, REPRODUCTION, OR DISCLOSURE
PROPRIETARY INFORMATIONPH: 719-599-3400 FX: 719-599-0057COLORADO SPRINGS, CO 809073265 FILLMORE RIDGE HEIGHTS
13" FLUTED ION-U MONOPOLE W/
LUMINAIRE
SCALE 1:32
DR-15-0219SAVANNAH, GA
2X ION-U MONOPOLE
Alcatel-Lucent
CommScope
Ericsson
SOLiD
Nokia
To match the more decorative and ornate light poles in many cities, ConcealFab has developed a line of fluted integrated poles. The smaller 13”-14.5” diameter poles can house a variety of the smaller radios, including: ION-M, ION-U, and low-wattage small cell radios. These poles share the same characteristics of other ConcealFab poles, including our patented sound-suppression system, cable wireways, and sectional design, with an option to do up to a 30’ single-piece pole. These pole also have optional decorative clamshell bases to conceal the anchor bolts and match other existing poles nearby.
10©2016 ConcealFab Corporation
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
S
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
S14” Smooth ION-ML Monopole
Alcatel-Lucent
CommScope
Ericsson
Nokia
To accommodate the small-wattage radios as well as the ION-U, ConcealFab has designed a 14” diameter smooth pole to match existing municipal light poles. Offered in a variety of colors, ConcealFab’s 14” diameter pole presents a useful ‘gap’ solution between its more popular sizes of integrated poles.
11
©2016 ConcealFab Corporation
Alcatel-Lucent
CommScope
Ericsson
Nokia
www.ConcealFab.com [email protected] P: 719.599.3400
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
S
16” Smooth Poles CommScope
JMA
AA
CABLE CONCEALMENT SKIRT / DIPLEXER AREA
CSS CYL-X7CAP-2CANTENNA (BY OTHERS)
EXTENSION SECTION
LIGHTARM WITHCOBRAHEAD LUMINAIRE
TRANSITION SHROUD
RADIO SECTION(CAPABLE OF HOLDING UP TO TWO (2) TEKO REMOTE UNITS)
PEDESTAL SECTION
15'-0"
3'-0"
6.63
16.00
0
2'-0"
11'-0" 11'-10"
25'-9"
29'-5"
24'-11"
8'-0"
28'-5" RAD CENTER
FOUN
DA
TION
(BY
OTH
ERS)
FOUN
DA
TION
(BY
OTH
ERS)
1.375
16.13
0
2.0
0
18.
00
20.
00
2.5
0
17.
50
0 2.00 2.50
17.50 18.00 20.00
SECTION A-ASCALE 1 : 10
1.50" THK.A36 STEEL
PRELIMINARY
NOTES:LIGHTARM MODEL, LIGHTARM HEIGHT & LIGHTARM LENGTH CAN BE VARIED.1.FOUNDATION DEPTH AND DIAMETER CAN BE ADJUSTED DEPENDING ON POLE HEIGHT & SOIL COMPOSITION.2.POLE MOUNTED BANNERS ARE OPTIONAL.3.
SIDE ELEVATION VIEW FRONT ELEVATION VIEW BASE PLATE W/ ANCHOR BOLT LOCATIONS(ANCHOR BOLTS ARE 1.25")
16" O.D. SMOOTH INTEGRATED POLE
SAMPLE ELEVATION DRAWING
TIL-15-071516" O.D. SMOOTH INTEGRATED POLE 004753
A
B
C
D
234
4 3 2 1
1
Drawn By: Date: Ckd By: Date:
10/06/15DOC10/06/15MDH DOC10/06/15A NEW RELEASE
Apd:Description:Date:Rev: Sheet Title:
±1/16"X ±1° X.X ± 0.5°
X.X ± 0.050 X.XX ± 0.020X.XXX ± 0.010
DECIMAL ANGLE FRACTION
DIMENSIONS ARE IN INCHES
DO NOTSCALE DWG
E
F
G
H
A
B
C
D
E
F
G
H
PH: 719-599-3400 FX: 719-599-0057COLORADO SPRINGS, CO 80907
3525 NORTH CASCADE AVENUE
© 2015 ConcealFab Corp - All Rights ReservedPERTINENT CONTRACTUAL DOCUMENTS.IN NON-DISCLOSURE AGREEMENTS ANDIS SUBJECT TO RESTRICTIONS SET FORTHUSE, REPRODUCTION, OR DISCLOSUREPROPRIETARY INFORMATION
Drawing / Part Number:
Project:
Consultant:
Sheet:Sheet Scale:
1:50 1 OF 1 ARev:
ConcealFab’s larger 16” diameter smooth pole can hold a variety of the larger DAS radios including the Teko and the ION-ML, plus it can be retro-fitted to hold some of the smaller radios (ION-M, and ION-U). In addition to our patented sound suppression technology, this pole can either be one continuous diameter or transitioned down to a smaller diameter extension pole, above the radio cabinet, to more closely match the diameters of existing light poles.
12©2016 ConcealFab Corporation
CommScope
JMA 17” Fluted Integrated Pole
AA
CABLE CONCEALMENT SKIRT / DIPLEXER AREA
CSS CYL-X7CAP-2CANTENNA (BY OTHERS)
EXTENSION SECTION
DECORATIVE LIGHTARMWITH LUMINAIRES
TRANSITION SHROUD
RADIO SECTION(CAPABLE OF HOLDING UP TO TWO (2) TEKO REMOTE UNITS)
PEDESTAL SECTION(DECORATIVE SHROUD OUTLINED)
15'-0"
3'-0"
6.63
17.00
2.00 0
2'-0"
11'-0" 11'-10"
22'-6"
26'-2"
16'-0"
25'-2" RAD CENTER
FOUN
DA
TION
(BY
OTH
ERS)
FOUN
DA
TION
(BY
OTH
ERS)
FINISH GRADE
1.375
16.13
0
0 2.00
18.00 20.00
2.50
17.50
2.5
0 2
.00
17.
50
18.
00
20.
00
SECTION A-ASCALE 1 : 10
1.50" THK.A36 STEEL
PRELIMINARY
NOTES:LIGHTARM MODEL, LIGHTARM HEIGHT & LIGHTARM LENGTH CAN BE VARIED.1.FOUNDATION DEPTH AND DIAMETER CAN BE ADJUSTED DEPENDING ON POLE HEIGHT & SOIL COMPOSITION.2.POLE MOUNTED BANNERS ARE OPTIONAL.3.
SIDE ELEVATION VIEW FRONT ELEVATION VIEW BASE PLATE W/ ANCHOR BOLT LOCATIONS(ANCHOR BOLTS ARE 1.25")
17" O.D. FLUTED INTEGRATED POLE
SAMPLE ELEVATION DRAWING
TIL-15-071517" O.D. FLUTED
INTEGRATED POLE 004754
A
B
C
D
234
4 3 2 1
1
Drawn By: Date: Ckd By: Date:
10/06/15DOC10/06/15MDH DOC10/06/15A NEW RELEASE
Apd:Description:Date:Rev: Sheet Title:
±1/16"X ±1° X.X ± 0.5°
X.X ± 0.050 X.XX ± 0.020X.XXX ± 0.010
DECIMAL ANGLE FRACTION
DIMENSIONS ARE IN INCHES
DO NOTSCALE DWG
E
F
G
H
A
B
C
D
E
F
G
H
PH: 719-599-3400 FX: 719-599-0057COLORADO SPRINGS, CO 80907
3525 NORTH CASCADE AVENUE
© 2015 ConcealFab Corp - All Rights ReservedPERTINENT CONTRACTUAL DOCUMENTS.IN NON-DISCLOSURE AGREEMENTS ANDIS SUBJECT TO RESTRICTIONS SET FORTHUSE, REPRODUCTION, OR DISCLOSUREPROPRIETARY INFORMATION
Drawing / Part Number:
Project:
Consultant:
Sheet:Sheet Scale:
1:50 1 OF 1 ARev:
The largest fluted pole diameter available, ConcealFab’s 17” diameter fluted pole offers a decorative option for the larger DAS radios such as the Teko or the ION-ML. Similar to the 16” diameter smooth pole, it can either be a constant diameter, up to 30’, or be transitioned down to a smaller diameter extension pole above the radio cabinet section. Like the other fluted pole sizes, there is an optional, decorative clamshell base as well as the ability to accommodate any style of luminaire.
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
S
13
©2016 ConcealFab Corporation
CommScope
JMA
www.ConcealFab.com [email protected] P: 719.599.3400
Octagonal Pole
ConcealFab’s largest integrated pole option, the Octagonal, comes in at just under 20” across. It is designed to accommodate the largest radios or“mini-macros” as well as the largest DAS units, the Prism and the SOLiD radios. The Octagonal has an optional power section which the radio section can stack on top of before transitioning down to a smaller diameter extension pole. Each radio section can hold up to two mini-macros or one Prism or one SOLiD unit.
• “Building Block” design makes meeting your Deployment RAD Center easy.
• Structurally rated for even the maximum wind loading environments
• Power sections available to meet most code requirements
Alcatel-Lucent
CommScope
Ericsson
NOKIA
INTE
GR
ATED
CO
NC
EALM
ENT
POLE
S
14©2016 ConcealFab Corporation
antenna polesWhen existing street light infrastructure isn’t structurally adequate to mount the antennas and radios, ConcealFab’s line of Antenna poles could be the answer. We have a vast portfolio of structurally rated poles of all shapes, sizes, colors and textures. Our antenna pole portfolio includes: smooth and fluted, tapered and non-tapered, a typical galvanized finish through a custom concrete textured finish, flagpoles and ornate luminaires, etc. We appreciate that the demands of different jurisdictions can be extensive and our line of antenna poles can certainly help address your deployment challenges.
15
©2016 ConcealFab Corporation
antenna poles
www.ConcealFab.com [email protected] P: 719.599.3400
Engineered &Integrated Poles
antenna mountIngsystemsUtilize existing infrastructure with ConcealFab’s line of bracket-based solutions for small cell antennas. Cover a multitude of applications in urban and rural environments with our Universal Pole-Top Mounting System, Wide Diameter Pole-Top Mounting Bracket, Side-Arm Mounting System, and Pole-Top Extension Mount. All mounting kits have an optional cable concealment shroud to cover the RF feedline cabling beneath the antenna. Lastly, ConcealFab has a rooftop vent product in case pole-mounted options are not available.
16©2016 ConcealFab Corporation
ConcealFab® Universal Cantenna Sleeve
ConcealFab’s Universal Cantenna Sleeve represents the foundational component of our full line of Quasi-Omni antenna mounting solutions. It allows each of our mounting kits to accept a multitude of different antenna brands by adding a simple, low cost, but highly-engineered adaptor. This product single-handedly eliminates your need to design or purchase a custom mount for each brand of antenna. The Universal Cantenna Sleeve has several other advantages that were designed-in based on years of feedback from customer engineers and construction crews. The best part is that even if you don’t find a ConcealFab® mounting kit that works perfectly for you, as long as your solution terminates at a 2” NOM pipe, ConcealFab’s® Universal Cantenna Sleeve can still be paired with your mounting solution.
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
COMPATIBLE ANTENNAS
CW#070#03Fxy-#; CW#070#06Fxy-#; CW#070#12Fxy-#; CW#360#03Fxy-#; CW#360#06Fxy-#; CW#360#12Fxy-#Amphenol
Kathrein
CSS
Galtronics
CommScope
840 10500; 840 10501; 840 10505; 840 10506; 840 10510;840 10511; 840 10515; 840 10516
CYL-X7CAP-1; CYL-X7CAP-2
EXTENT TS545-1; EXTENT TS622-1; EXTENT T4879-1; EXTENT P4879-1
NH360QS-DG-F0M
CANTENNA SLEEVE MOUNT PART NUMBERS:(For Quasi/Psuedo-Omni Antennas)
Amphenol
Kathrein
CSS
Galtronics
CommScope
Quasi-Omni Antenna
ConcealFab Part Number
Brown Black Silver Gray
002771
002769
002705
002701
002706
002703
002772
002770
002773
003004
003005
003006
*Available in Wider Diameter 2-7/8” OD.
WIDE DIAMETER SLEEVE
Kathrein
CSS
Galtronics
ConcealFab Part Number
Brown Silver
003219 003264
17
©2016 ConcealFab Corporation
Quasi-Omni Antenna
www.ConcealFab.com [email protected] P: 719.599.3400
ConcealFab’s Universal Pole-Top Brackets are sleek, aesthetically pleasing products ideal to a variety of deployment scenarios and engineered for extreme exposure zones. The brackets have adjustable diameters from a 5” minimum O.D. to 8-3/8” maximum O.D. Poles, can mount to steel, wooden, or concrete poles, and adapt to all major quasi-omni antenna configurations. Finally, they are available with an optional cable concealment shroud to seamlessly transition the antenna to the pole, concealing the brackets and RF feed-line cabling from public view.
ConcealFab® Standard Pole-Top Mount
Quasi-Omni “Cantenna” (Sold Separately)
Universal Cantenna Sleeve with Adaptor Plate(#002769; BROWN) See Page 17. Sold Separately.
Standard Pole-Top Mount(#002609, BROWN)See Page 22.
Cable Concealment Shroud for Standard Mount(#002774, BROWN, Sold Separately) See Page 25. Sold Separately.
Universal Pole-Top Mounting Bracket
UNIVERSAL POLE-TOP MOUNTING BRACKET PART NUMBERS:
ConcealFab Part Number
Brown Black Silver Gray
002609 002767 002768 003007
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
18©2016 ConcealFab Corporation
ConcealFab’s Wide-Diameter Pole-Top Brackets are sleek, aesthetically pleasing products ideal for a variety of deployment scenarios and engineered for extreme exposure zones. The brackets adjust to pole diameters from 5 1/4” to 14 1/8”, can mount to steel, wooden poles, or concrete poles and adapt to all major quasi-omni antenna configurations. Finally, they are available with an optional cable concealment shroud to seamlessly transition the antenna to the pole, concealing the brackets and RF feed-line cabling from public view.
ConcealFab® Wide Diameter Pole-Top Mount
Universal Cantenna Sleeve(#002769, BROWN)See Page 17. Sold Separately.
Wide Diameter Pole-Top Mount(#003002, BROWN)
Wide Diameter Cable Concealment Shroud(#003162, BROWN) See Page 25. Sold Separately.
WIDE DIAMETER POLE-TOP MOUNTING BRACKETPART NUMBERS (Sleeve, Sold Separately)
ConcealFab Part Number
Brown Black Silver Gray
003002 002917 002913 003017
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
19
©2016 ConcealFab Corporation
www.ConcealFab.com [email protected] P: 719.599.3400
ConcealFab’s Universal Side-Arm Bracket is sturdy and aesthetically pleasing. There is ample room within the cavity of the bracket to run RF feed-line cabling as well as conceal any splitters or diplexers. The bracket pairs with ConcealFab’s Universal Cantenna Sleeve to accommodate all major quasi-omni antennas. An optional cable concealment shroud is also available for this bracket system.
ConcealFab® Universal Side-Arm Mounting System
Gen
eral
Fea
ture
s • 360 degree azimuth adjustment• Universal adaptors for all major antenna OEMs• Coated with ConcealFab’s PIM-mitigating PIM Kote™• Mounts to steel, wooden, or concrete poles• Available in a variety of colors• Optional cable concealment shroud • Optional adaptors to mount low-power radios
Universal Cantenna Sleeve(#002772, SILVER)See Page 17. Sold Separately.
UNIVERSAL SIDE-ARM MOUNTING SYSTEM(No Sleeve, Sold Separately)
ConcealFab Part Number
Brown Black Silver Gray
003099 003100 002610 003102
Side Arm Mount#002610, Silver AN
TEN
NA
MO
UN
TIN
G S
YSTE
MS
20©2016 ConcealFab Corporation
ConcealFab® Dual Panel Antenna Side Arm
ConcealFab’s Dual Panel Antenna Side Arm provides our customers with the ability to adjust down tilt and azimuth for two panel antennas in nearly any position. This utilitarian side arm also conceals both antenna and feed-line cabling wires as well as diplexers / splitters, providing an aesthetically sleek design.
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
21
©2016 ConcealFab Corporation
www.ConcealFab.com [email protected] P: 719.599.3400
ConcealFab’s Pole-Top Extension mount is an answer to a unique set of challenges. Challenge #1: In certain situations a Pole-Top mounted antenna will be too close to the existing power lines at the top of the pole and needs to be spaced farther apart.
Challenge #2: PIM sources may be found at or near the top of the pole where additional spacing could mitigate PIM interference concerns.
ConcealFab® Pole-Top Extension Mount
POLE-TOP EXTENSION MOUNT
ConcealFab Part Number
Brown Black Silver Gray
5’ 002912 002920 002916 003020
4’ 002911 002919 002915 003019
3’ 002910 002918 002914 003018
5’
4’
3’
Gen
eral
Fea
ture
s • 360 Degree azimuth adjustment• Structurally certified for extreme exposure zones• ConcealFab® PIM Kote™ surface applied to
mitigate PIM interference• Multiple colors available• Works with ConcealFab’s® Universal Cantenna
Sleeve
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
22©2016 ConcealFab Corporation
Height
Ballasted Rooftop Mount
ConcealFab’s Ballasted Rooftop Mounting System is a great deployment option for urban / suburban areas with low-elevation, flat rooftops. The unit can be sold simply as a PIM-friendly structural mount or with our RF-Transparent Vent Concealment. The ballast tray system prevents any damage to roof membrane that penetrating rooftop mounts can cause.
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
23
©2016 ConcealFab Corporation
Radio EquipmentMounting Post
ConcealFab Part Number
Brown Black Silver Gray
003495 003496 003211 003497
BALLASTED ROOFTOP MOUNT
Ballasted Rooftop Mount
Ballasted Rooftop Mount shown with Rooftop Vent Concealment
ROOFTOP VENT CONCEALMENT
ConcealFab Part Number
Brown Silver
001874 003364
002170 003365
002171 003727
003525 003726
16”
Diameter
16”
18”
18”
www.ConcealFab.com [email protected] P: 719.599.3400
DAS Pole-Top Antenna Concealments
ConcealFab designed and fabricated more than one hundred DAS pole top units to be deployed in the VA / MD area. Each pole top unit contained a variety of panel antenna configurations, up to 6 panel antennas (2 rows of 3 antennas).
The main challenge with these tightly-packed configurations is the amount of PIM generated from the surrounding antennas. To address these issues, ConcealFab developed a variety of PIM mitigation solutions including: 1. A proprietary PIM Kote™ coating to cover the steel bracketry; 2. Specialized Bracketry to mount the panel antennas to the coated steel, and finally 3. ConcealFab’s PIM Shield™, which affixes to the top of panel antennas to reduce the amount of detrimental residual signal emitted from the antennas. These 3 solutions ensured satisfactory PIM performance across the deployment area.
Lastly, in addition to the structural soundness of the concealments, ConcealFab has an ultra-RF transparent radome / shroud that achieves minimal RF attenuation at low-band, high-band, and microwave frequencies.
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
24©2016 ConcealFab Corporation
Radio EquipmentMounting Post
WIDE DIAMETER CABLE CONCEALMENT SHROUD
AmphenolKathrein
CSSGaltronics
CommScope
CableConcealment
Shroud
ConcealFab Part Number
Brown Black Silver Gray
003162 003164 003165 003163
Cable Concealment Shroud
CABLE CONCEALMENT SHROUD
AmphenolKathrein
CSSGaltronics
CommScope
CableConcealment
Shroud
ConcealFab Part Number
Brown Black Silver Gray
002774
002783
002555
002782
002775
002784
003008
003009
ConcealFab Part Number
Brown Black Silver Gray
003250 003251 003252 003254
Cable Concealment Shrouds
Side-Arm Concealment Shroud
ANTE
NN
A M
OU
NTI
NG
SYS
TEM
S
25
©2016 ConcealFab Corporation
SIDE-ARM CABLE CONCEALMENT SHROUD
Universal Cantenna Sleeve (#002769; BROWN) See Page 17. Sold Separately.
Universal Cantenna Sleeve (#002769; BROWN) See Page 17. Sold Separately.
Gray
003008
003009
www.ConcealFab.com [email protected] P: 719.599.3400
Engineered &Integrated Poles
radIo sHrouds& caBInets
26©2016 ConcealFab Corporation
RAD
IO S
HR
OU
DS
AND
CAB
INET
SStandard Radio Cabinet / Shroud
27
©2016 ConcealFab Corporation
ConcealFab has begun building out its line of Standard radio cabinets and shrouds to complement its extensive product portfolio. ConcealFab’s line of cabinets can be custom designed to accommodate all types of radio sizes, accommodating for both active and passively-cooled equipment. These cabinets are designed using the same philosophy as our line of integrated poles, targeting the most compact design possible and leveraging our patented and proprietary techniques for sound-suppression, cable management, and thermal dissipation.
• Holds up to two radios• Available in any color• Includes meter socket for all service
input configurations• Includes main disconnect and breaker-
box• Includes sound suppression technology• Incorporates radio cooling louversGround Mounted Shroud
Pole Mounted Shrouds
www.ConcealFab.com [email protected] P: 719.599.3400
RAD
IO S
HR
OU
DS
AND
CAB
INET
S
ConcealFab designed and fabricated a unique, concealed light pole to be deployed on Boston’s historic Newbury Street. The project entailed concealing two Ruckus WiFi combination radio / antennas in an RF-transparent concealment shroud.
The existing infrastructure consisted of hexagonal, concrete light poles. ConcealFab was not only able to match the profile shape of the existing poles using structural steel, but also utilized a coating system that mimicked the concrete texture of the existing poles.
The RF-transparent concealment also had a hexagonal profile with a concrete texture, which had minimum RF attenuation, was structurally sound, and thermally compliant with the OEM’s required ventilation. Given the high-profile nature of this deployment, multiple city agencies had to sign off on the aesthetics in order to sanction the deployment.
Radio Concealment Shroud
28©2016 ConcealFab Corporation
custom concealmentoptIonsFrom sporting venues and shopping malls to storefronts and marquee signs; ConcealFab® Signage Concealments and Faux Chimneys are aesthetically pleasing solutions that will add value to your business, redefine your customer experience, and enhance the capabilities of your DAS network. ConcealFab® Stadium Concealments and Signage Concealments can be paired with ConcealFab® RF Optimization products for multifunctional capability and increased RF-transparency. See what ConcealFab® can do for you.
29
©2016 ConcealFab Corporation
www.ConcealFab.com [email protected] P: 719.599.3400
Pole Top Concealments for oDAS Panel Antenna
ConcealFab’s Pole-Top Mounts and Concealments for panel antennas accommodate up to 6’ panel antennas in various configurations. The triple-mast mounting structure allows for maximum azimuth adjustment for each individual antenna, while ConcealFab’s RF transparent shrouds have been empirically tested to maximize transparency. In addition, ConcealFab’s product ships with all the PIM-mitigating hardware and coatings necessary to pass carrier-dictated PIM standards.
Gen
eral
Fea
ture
s • Structurally certified for extreme exposure zones.• Includes all necessary PIM-mitigating devices
(PIM-friendly antenna brackets, PIM Kote™ for steel mast, and PIM shield™ custom-fit to each antenna)
• Multiple RF transparent shroud color options available
• Mounts to steel, wooden, or concrete poles
Available in 30” O.D. x 6’ and 8’ heights
CU
STO
M C
ON
CEA
LMEN
T O
PTIO
NS
ConcealFab Part Number
Brown Black Silver
003495 003496 003211
Gray
003497
30©2016 ConcealFab Corporation
Stadium / Venue Concealments
The logistics behind undertaking the physical purchase, installation and maintenance of a comprehensive small cell system only grows as stadium capacity increases. When you take into account Jayhawks Stadium in Lawrence, KS holds over 50,000 seats, trying to potentially cater for 50,000 individual mobile devices uploading an image of perhaps 3MB during a halftime period of 15 minutes – the demand alone could overwhelm a system.
ConcealFab’s Stadium Signage Concealments were designed to facilitate the multitude of upgrades happening at stadiums, race tracks, and other public sports venues. Designed with high-strength steel and performance-tested RF-transparent material, these products can be customized to adapt to a variety of environments.
Gen
eral
Fea
ture
s
• Digitally printed custom decals are UV stabilized
• Structurally-rated for extreme exposure zones
• High-performance, RF-tested materials• Adaptable to a wide variety of antennas• Can be paired with any ConcealFab®
RF Solution for multi-function capability (e.g. Back-Lobe Suppressor, Side-Lobe Suppressor)
CU
STO
M C
ON
CEA
LMEN
T O
PTIO
NS
31
©2016 ConcealFab Corporation
www.ConcealFab.com [email protected] P: 719.599.3400
Decorative Lanterns and Lightenna™ Concealments
ConcealFab’s Decorative Lantern and Lightenna™ Concealments are the ideal solutions for difficult deployments. These products blend in with the most unique architecture, historic neighborhoods, and high-end districts. Constructed of high-performance, decorative thermoplastics and developed in concert with several antenna OEMs, these concealment products should be part of every deployment tool box.
Gen
eral
Fea
ture
s • Custom finial options available• Structurally-rated for extreme exposure zones• High-performance, RF-tested materials• Multiple color options• Adaptable to a variety of antennas• Mounts to steel, wooden, or concrete poles
CU
STO
M C
ON
CEA
LMEN
T O
PTIO
NS
32©2016 ConcealFab Corporation
rF optImIzatIon
33
©2016 ConcealFab Corporation
RF
OPT
IMIZ
ATIO
N
RF
OPT
IMIZ
ATIO
N
www.ConcealFab.com [email protected] P: 719.599.3400
PIM Mitigation Solutions – PIM Shield™
ConcealFab has developed a line of proprietary products that reduce PIM interference in fully-assembled infrastructure solutions. ConcealFab can assemble, test, and troubleshoot any mounted antenna configuration and apply its line of PIM-reducing products to optimize full-system performance.
PIM improvements of 30+ dBC when utilizing the full line of ConcealFab® PIM-mitigating products: PIM Shield™ (RF absorber that attaches directly to the antenna), PIM Kote™ (proprietary coating for mounting structure), and PIM brackets (low-PIM brackets custom-designed to attach the antenna to the mounting structure).
Available off the shelf for Amphenol HTX 2’ and 4’, Katherin PA3 and PA4 Profiles. Can be customized for other antenna types.
34©2016 ConcealFab Corporation
RF
OPT
IMIZ
ATIO
N
Back-Lobe Suppressors
ConcealFab’s Back-Lobe Suppressor improves the front-to-back ratio of panel and microwave dish antennas without altering the main beam patterns. It is custom-designed to fit on the back of any panel antenna without significantly increasing the overall size envelope. In addition, ConcealFab’s Back-Lobe Suppressor is light weight and can utilize existing antenna mounting hardware.
RF
OPT
IMIZ
ATIO
N
35
©2016 ConcealFab Corporation
www.ConcealFab.com [email protected] P: 719.599.3400
National Sales Footprint
ConcealFab is working with two of the largest Manufacturing Representative firms in the country in order to have a local presence in major metropolitan areas. EPIC Marketing and Precision Marketing give ConcealFab continuous coverage in 31 states and Canada. Their knowledge of RF products in general and our products specifically, coupled with their Carrier and non-carrier relationships creates a powerful local support team for ConcealFab. In addition, our reps have extensive PIM, fiber, and power expertise.
Epic MarketingAK, WA, HI, OR, CA, NV
Epic Marketing Contact: [email protected]
Regional Manufacturing RepresentativesPrecision Marketing Services Inc.AL, CT, FL, DE, GA, ME, KY, MA, MD, NH,MS, NJ, NC, NY, SC, PA, TN, RI, VA, VT, DC,WV, IN, OH, MI, Canada
Precision Marketing Contact:[email protected]
36©2016 ConcealFab Corporation
natIonal sales FootprInt
©2016 ConcealFab Corporation
PRODUCTGUIDE 2016
PRODUCT
GU
IDE
2016
[email protected] N. Cascade AvenueColorado Springs, Colorado 80907