january 2018 - concealfab,...

JANUARY 2018

COMMERCIALPRODUCTGUIDE

CONCEALFAB 13” FLUTED MONOPOLESAVANNAH, GEORGIA

TABLEOF CONTENTS

INTRODUCTION 01

ANTENNA MOUNTS 05

RADIO & ANTENNA SHROUDS 15

INTEGRATED RADIO POLES 25

VENUE CONCEALMENTS 35

TEST & MEASUREMENT CAPABILITIES 41

SALES CONTACTS 43

INTRODUCTION

ConcealFab Corporation’s solution portfolio of infrastructure products includes a full line of integrated poles, antenna mounting solutions, radio cabinets / shrouds, replacement light poles and custom concealments (e.g., Stadium Signage and Lightennas). These pre-engineered infrastructure solutions are some of the most innovative and easy to deploy products available on the market today.

We have evolved our solution portfolio to focus on products that improve a carrier’s Signal-to-Interference-plus-Noise ratio (SINR). ConcealFab’s signal-enhancement products facilitate densification of DAS and Small Cell nodes by helping expedite zoning approvals with structurally sound, yet aesthetically pleasing product solutions.

CONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDE1

WWW.CONCEALFAB.COM

INTRODUCTION

ENGINEERING EXCELLENCE• Maximum RF Performance

• Superior Thermal Performance

• Designs prioritize both aesthetics and constructibility

DEEP INDUSTRY RELATIONSHIPS• Direct access to OEM technical experts

• Experience meeting the needs of municipal stakeholders

• Products are approved by multiple carriers

SUPERIOR MARKET KNOWLEDGE• Nationwide Market Perspective

• Full understanding of node deployment life-cycle

• Experts in cellular, power, and fiber systems

SCALABLE MANUFACTURING• Agile and Lean Manufacturing practitioners

• One-hundred thousand square feet of in-house production capacity

• Rapid prototyping capability

2

PORTFOLIO OVERVIEW

ANTENNA MOUNTS RADIO & ANTENNA SHROUDS

3

INTEGRATED RADIO POLES

INDEXTri-Mast Antenna Shroud (19)Replacement Light Standards (23)Macro Curved Shroud (17)14’’/18’’ Diameter Concealment (22)10.75’’ Antenna Shroud (20)

Replacement Light Standards (23)Small Curved Shroud (17)Holster Side Arm (21)24X3 Radio Concealment (21)

A.B.C.D.E.F.G.

G

B

O

N

CB

D

A

B

F

I

L

K

J

M

PQ

R

S

U

CONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDE

E

D

E

B

H

H.I.

J.K.L.

Standard Pole Top Mount (9)Universal Cantenna Sleeve, HD (7)Cable Concealment Shroud (9) Wide Diameter Pole Top Mount (10)Cable Concealment Shroud (10)Cantenna Gimbal Sleeve (7)Pole Top Extension Mount, HD (13)

Side Arm Mount, HD (14)Side Arm Cable ConcealmentShroud (20)Pole Top Mount, LD (9)Single Bolt Adapter (8)Cable Concealment Shroud, LD (14)

M.N.O.P.Q.

R.S.T.U.

T

WWW.CONCEALFAB.COM

PORTFOLIO OVERVIEW4

INTEGRATED RADIO POLES

12’’ Monopole (29) 13’’ FlutedMonopole (30)

16’’ Pole (31) 17’’ FlutedPole (32)

20’’ OctagonalPole (33)

Pedestal Baseand Pole (34)

INDEXVENUE CONCEALMENTS

A

E

DA. Panel Wall Mount (38)

B. Stadium Vomitory (36)

E. Hardened Stadium Ericsson DOT (37)

D. Ballasted Rooftop Mount and Shroud (39)

C. Panel Antenna Sign Concealment (38)

B

C

HEAVY DUTYHeavy Duty Mounting Options

Standard MountRefer to Page 9

for Details

Optional CableConcealment Shroud

ConcealFab manufactures a wide variety of mounting solutions for the quasi-omni “cantennas” commonly deployed at multi-band small cell and oDAS sites. Mounting kits with optional cable concealment shrouds are available to securely attach these larger wind load antennas to existing wood, metal or concrete poles as well as to other structures. ConcealFab’s “cantenna sleeve” design enables each mount to support a variety of antenna models, eliminating the need for a different mounting kit for each brand of antenna.

ConcealFab’s mounting solutions includeour proprietary PIM Kote™ finish tominimize passive intermodulation (PIM.)

Specifying a complete mounting solution requires multiple part numbers:

1 – Cantenna sleeve

2 – Mount

3 – Shroud (optional)

Wide DiameterMount

Refer to Page 10for Details

Side Arm MountRefer to Page 11

for Details

Wood Post MountRefer to Page 13

for Details

Pole Top ExtensionRefer to Page 13

for Details

Cantenna Gimbal SleeveRefer to Page 7 for Details

Standard Cantenna SleeveRefer to Page 7 for Details

AN

TEN

NA

MO

UN

TS

ANTENNA MOUNTS

5 CONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDE

Optional Cable Concealment Shroud

Light Duty Pole Top MountRefer to Page 14

for Details

Light Duty Side Arm Mount

Refer to Page 12 and 14for Details

Light Duty PoleTop ExtensionRefer to Page 13

for Details

Lighter duty mounting solutions are available for lower wind load quasi-omni antennas used in higher frequency applications. These mounts include an adapter to convert the antenna manufacturer’s bolt pattern to a single mounting bolt which attaches directly to the light duty pole top mount or the light duty side arm mount. An optional cable concealment shroud is available to hide RF feed-line cables from public view.

Lower wind load antennas can be attached to any of ConcealFab’s heavy duty mounts using a single bolt adapter and small antenna sleeve. Specifying a complete mounting system requires up to four part numbers, depending on the desired mount:

1 – Single bolt adapter

2 – Small antenna sleeve (optional)

3 – Mount

4 – Shroud (optional)

LIGHT DUTYLight Duty Mounting Options

Single Bolt AdapterRefer to Page 8

for Details

Small Antenna SleeveRefer to Page 8

for Details

AnyHeavy Duty

MountRefer to Page 5

for Details

WWW.CONCEALFAB.COM

ANTENNA MOUNTS

AN

TEN

NA

MO

UN

TS

6

ANTENNA MOUNTS

Cantenna SleevePN - PPPPPP-S-F

HEAVY DUTY

2” Nom

S = Size of nom pipe stub

BlackBrownGraySilver

F = Finish Code

1

1234

AmphenolKathreinJMA GaltronicsCommScopeGaltronics 6480iCCIKMW

PPPPPP = Base Part #

007941007942

007943008530008577008609

Cantenna Gimbal Sleeve

PN - PPPPPP-S-F

2” Nom


1

AmphenolKathreinJMA GaltronicsCommScopeCCIKMW


007966007967

007968008574008575

007942

007943

Cantenna sleeves are used to create a standard interface betweenthe antenna manufacturer’s bolt pattern and a ConcealFab mounting kit. Cantenna sleeves are designed to mount to the 2 inch nominal (2.375 inch OD) pipe stub on ConcealFab mounting kits, enabling 360 degree azimuth adjustment.

007941

The gimbal sleeve can be used with any ConcealFab heavy dutymount to correct for up to 15 degrees of vertical tilt of the installed mount. This adjustment is often required on direct-burywooden poles that are leaning in one direction. The gimbal sleeve istaller than a standard sleeve and is not compatible with most cableconcealment shrouds.

HEAVY DUTY

AN

TEN

NA

MO

UN

TS7

008530

008609



F = Finish Code

1234

WWW.CONCEALFAB.COM

ANTENNA MOUNTS

AN

TEN

NA

MO

UN

TS

LIGHT DUTY

PN - PPPPPP-F

Alpha 2.5 GHzAlpha 3.5 GHzKathrein SlimpoleCCI SCA-OM-360Fxx-Q-H2 antenna model only


007944007945007946008001

PN - 007947-S-F

2” Nom


1

Small Antenna Sleeve

Single Bolt Adapter

007944 007946

Use with Single Bolt Adapter to mount small diameter Cantennas to heavy duty mounts

Single bolt adapters are used with lower wind load antennas to convert the antenna manufacturer’s bolt pattern to a single mounting bolt. Only the single bolt adapter is required to attach an antenna to the light duty pole top and light duty side arm mounts.

None (Stainless Steel)

F = Finish Code

0

In addition to a single bolt adapter, a small antenna sleeve is required to attach a low wind load antenna to a ConcealFab mount with a 2-inch nominal (2.375-inch OD) pipe interface. This includes all heavy duty mounts as well as the light duty top extensions.

None (Stainless Steel)

F = Finish Code

0

007945 008001

LIGHT DUTY

8

AN

TEN

NA

MO

UN

TS

ANTENNA MOUNTS

Standard Pole Top Mount

PN - 007948-F (Bracket)

ConcealFab’s standard pole top mount is designedto attach an antenna to the top of an existing wood,concrete or steel pole ranging from 5.0 to 8.37 inchoutside diameter. These mounts are engineered tosupport the sail area of typical 24 inch tall, multi-bandsmall cell / oDAS antennas in extreme exposure zones.An optional cable concealment shroud is availableto hide the RF feed-line connections and mountingbrackets from public view. Order sleeve separately.


F = Finish Code

1234

PN - PPPPPP-F (Shroud)


F = Finish Code

1234

AmphenolKathreinJMA GaltronicsCommScope


007949

007950

HEAVY DUTY

007949

007950


WWW.CONCEALFAB.COM

ANTENNA MOUNTS

AN

TEN

NA

MO

UN

TS

Wide Diameter Pole Top Mount

ConcealFab’s wide diameter pole top mount isdesigned to attach an antenna to the top of anexisting wood, concrete or steel pole ranging from5.25 to 14.12 inch outside diameter. These mountsare engineered to support the sail area of typical24 inch tall, multi-band small cell / oDAS antennasin extreme exposure zones. An optional cableconcealment shroud is available to hide the RFfeed-line connections and mounting brackets frompublic view. Order sleeve separately.


F = Finish Code

1234


F = Finish Code

1234

AmphenolKathreinJMA GaltronicsCommScope


007952

007953

PN - 007951-F (Bracket) PN - PPPPPP-F (Shroud)

HEAVY DUTY

007952

007953

10

AN

TEN

NA

MO

UN

TS

ANTENNA MOUNTS11

Side Arm Mount



F = Finish Code

1234

ConcealFab’s heavy duty side arm mount isdesigned to attach an antenna to the side ofan existing pole or structure. These mounts areengineered to support the sail area of typical 24 inchtall, multi-band small cell / oDAS antennas inextreme exposure zones. RF cables, splitters anddiplexers can be concealed inside the arm, exitingeither into the pole or to the outside surface of thepole. An optional cable concealment shroud isavailable to hide the RF feed-line connections frompublic view. Order sleeve separately.

HEAVY DUTY

PN - PPPPPP-F (Shroud)

AmphenolKathreinJMA Galtronics


007957


F = Finish Code

1234


WWW.CONCEALFAB.COM

ANTENNA MOUNTS

AN

TEN

NA

MO

UN

TS

12

Universal Side Arm Mount

ConcealFab’s Antenna Side Arm Mount is designedto mount to a variety of low wind load cylindricalantennas to the side of a 4 inch minimum outsidediameter pole. The mount can either be steel banded or bolted to the subject pole. A cable concealmentshroud is included with the mount to hide RF cables from public view.

PN - 007457-AABCC


AABCC = Finish Code

01204021040350404204

AlphaAlpha AW3477-SQuasi OMNIAntennaCCICCI SCA-OM-360Fxx-Q-H2 OMNI AntennaKathrein80010126 OMNI Antenna

APPLICABLE ANTENNAS

1

2

3

CCI Antenna Side Arm Mount

The CCI Antenna Side Arm Mount is designed tomount the CCI SCA-OM-360Fxx-E-H2SG-K antennato the side of a 4 inch minimum outside diameterpole. This mount is designed to meet cities with28” max height restriction. The outside edge of theCCI antenna is offset 24” from the subject pole. Themount can be either steel banded or bolted to thesubject pole. A cable concealmentshroud is included with the mount to hide RF cables from public view.


AABCC = Finish Code

01204021040350404204

PN - 007709-AABCC

LIGHT DUTY

AN

TEN

NA

MO

UN

TS

ANTENNA MOUNTS

PN - 007960-H-F

3’4’5’

H = Mast Height

123


F = Finish Code

1234

Wood Post Mount

PN - 007961-H-F

HEAVY DUTY

HEAVY DUTY

Brown

F = Finish Code

1

ConcealFab offers a variety of pole top extensions to increase the antenna RAD center above the top of an existing pole. Pole top extensions may be required for safety reasons at power line sites or to improve coverage / reduce PIM when luminaires are positioned close to the top of an existing pole. Order sleeve separately.

LIGHT DUTY

3’4’5’

H = Mast Height

123


F = Finish Code

1234

PN - 007962-H-F

• 5.25 to 14.12 inch outside pole diameter.

• For typical 24 inch tall, multi-band antennas inextreme exposure zones.

• 3.25 to 6.63 inch outside pole diameter.

• For smaller sail area antennas

ConcealFab’s wood post mount provides a convenient way to attach a small cell antenna to an existing wooden structure. The mount is bolted to an existing 4-inch nominal (3.5-inch actual) wooden member and is available with a variety of mast lengths to place the antenna RAD center at the required elevation. Order sleeve separately.

1’2’3’

H = Mast Height

123

Pole Top Extensions


WWW.CONCEALFAB.COM

ANTENNA MOUNTS

AN

TEN

NA

MO

UN

TS

14

Pole Top Mount LIGHT DUTY

Side Arm Mount



F = Finish Code

1234

ConcealFab’s light duty side arm mount is designed to attach a low wind load cylindrical antenna to the side of an existing pole or structure. RF cables can be concealed inside the arm, exiting either into the pole or to the outside surface of the pole. An optional cable concealment shroud is available to hide the RF feed-line connections from public view. Order single bolt adapter separately.

PN - 007953-F (Bracket) PN - 007954-F (Shroud)


F = Finish Code

1234


F = Finish Code

1234

ConcealFab’s light duty pole top mount is designed to attach a low wind load cylindrical antenna to the top of an existing wood, concrete or steel pole ranging from 3.25 to 6.63 inch outside diameter. An optional cable concealment shroud is available to hide the RF feed-line connections from public view. Order single bolt adapter separately.

The light duty cable concealment shroud is designed to work with both the light duty pole top and light duty side arm mounts.

RA

DIO

& A

NTE

NN

A S

HR

OU

DS

Overview

RADIO & ANTENNASHROUDS

RADIO SHROUDS• Multiple Shroud Sizes Available

• Smallest Footprint Available

• Thermally Approved or Compliant

ANTENNA SHROUDS• Multiple Shroud Sizes Available

• Custom Antenna Mounting Hardware to Minimize Size

• Diplexers and Combiners Can Be Mounted Within the Shroud

REPLACEMENT LIGHT STANDARDS• Designed to Aesthetically Match Existing Poles

• Integrated Antenna Mounting Provisions

• Cables are Hidden Inside the Pole


COMBINATION SHROUDS• Designed to House Both Radios and Serving Antenna

• Cables are Hidden Inside the Shroud

• Shrouds are Vented for Radio Thermal Management

WWW.CONCEALFAB.COM


RA

DIO

& A

NTE

NN

A S

HR

OU

DS

16

Small Cell Radio Shrouds

Radio shrouds provide a convenient and functional method for mounting the radio equipment and supporting components at cell sites. These shrouds not only improve the appearance of the site but also protect the equipment and sensitive connections from vandalism.

ConcealFab’s radio shrouds are designed to efficiently package a host of telecom equipment inthe smallest envelope possible. Space is available for two high power radios or a larger number of lowpower small cell radios mounted to opposite sides of a central septum. Room is provided for multipleRF combiners as well as a fiber optic drop / add module for WDM applications. Clam-shell style doorsopen wide to each side providing maximum access for installation and maintenance. Due to the largenumber of vents on the sides and top of the enclosure, sufficient air flow is achieved to passively coolthe enclosed radio equipment. ConcealFab’s radio shrouds can be mounted to a variety of existing and replacement poles.

RadioCompartment A

RadioCompartment B

PowerRectification

Optical Fiber Management

Diplexers / Combiners


17R

AD

IO &

AN

TEN

NA

SH

RO

UD

S

Small Curved Shroud

Macro Curved Shroud


ConcealFab’s Small Curved Radio Shroud is designed to house multiple low-powered radios. This shroud can also house a single high-powered radio. The shroud can mount to wood or steel poles. This shroud is available in various powder coat finishes.

Mechanical Specifications• 32’’ Height x 18’’ Width x 12’’ Depth

• Weight: 70 pounds (Shroud Only)

• Internal Volume: 3.8 cubic feet

ConcealFab’s Macro Curved Radio Shroud is designed to house multiple high-powered radios. This shroud can also house multiple low-powered radios. The shroud can mount to wood or steel poles. This shroud is available in various powder coat finishes.

Mechanical Specifications• 53’’ Height x 23’’ Width x 16’’ Depth

• Weight: 135 pounds (Shroud Only)

• Internal Volume: 10.8 cubic feet

WWW.CONCEALFAB.COM


18

RA

DIO

& A

NTE

NN

A S

HR

OU

DS

Clamshell Radio Shroud

The ConcealFab Clamshell Radio Shroud isdesigned to enclose a small cell radio and various power equipment.The shroud attaches around existing light poles to ease installationand light pole replacement requirements. This shroud also featuresaesthetic details to alleviate permitting issues.

Dual Support Unit (Dual SUP) Sunshield

ConcealFab’s Dual Support Unit Sunshield is designed to shroud a single Ericsson 220x radio Dual Support Unit. This shroud hides the radio equipment and associated cables, giving the node a cleaner aesthetic. The shroud mounts directly to the Dual Support Unit. This shroud is available in various paint finishes.

Mechanical Specifications• 24.9’’ Height x 8.2’’ Width x 5.6’’ Depth

• Weight: 1.6 pounds (Shroud Only)


19R

AD

IO &

AN

TEN

NA

SH

RO

UD

SCONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDE

Single Mast Pole Top Shroud

ConcealFab’s family of Single Mast Pole Top Shrouds can beeasily customized to meet operator requirements. Standard shroudoutside diameters include 24, 30 and 36-inch in heights ranging from3-FT to 8-FT tall. Custom mounting brackets to support ancillaryequipment such as diplexers, splitters and grounding bus bars insidethe shroud can be provided. The Single Mast Pole Top Shroud can be attached to existing poles ranging from 4.0 to 15.75 inch outside diameter or bolted directly to the top of new poles. Custom antenna mounting hardware is available enabling antennas to be mounted in the smallest diameter shroud possible. Transition shrouds are available to hide the mounting brackets and provide an aesthetically pleasing transition to the pole outside diameter.

Tri-Mast Pole Top Shroud

ConcealFab’s Tri-Mast Pole Top Shroud provides maximumflexibility for operators deploying multiple panel antennas at smallcell / oDAS sites. This 30-inch outside diameter shroud isavailable in 6-FT and 8-FT lengths. The shroud is large enoughto enable +/- 15° independent azimuth adjustment per sector withtypical 65° beam width multi-band antennas. This unit can bedeployed with a single array of high gain antennas or in a multi-operator configuration with stacked low gain antennas. The Tri-Mast Pole Top Shroud can be attached to existing poles with outside diameters ranging from 8.25 to 15.75 inches or bolted directly to thetop new poles. Custom, PIM friendly antenna mounting hardware isavailable. Please contact ConcealFab Customer Service for additional information. Transition shrouds are available to hide the mounting brackets and provide an aesthetically pleasing transition to the pole outside diameter.

WWW.CONCEALFAB.COM 20

RA

DIO

& A

NTE

NN

A S

HR

OU

DS


Panel Antenna Side Arm Shroud

10.75 Antenna Shroud

The 10.75 inch diameter pole top shroud is designed to enclose either a cylindrical antenna or a panel antenna. The shroud consists of a field removable top section to hide the serving antenna and a two-piece clamshell lower section to conceal the RF feed-lines and mounting brackets. ConcealFab can design provisions to mount this shroud on a wide variety of poles. This shroud is also available with mounting provisions for a Smart Meter.

ConcealFab’s Panel Antenna Side Arm Shroud provides customers the abilityto adjust mechanical down tilt and azimuthpointing direction for two back-to-backsmall cell panel antennas. The shroudis 24-inch diameter x 24-inch tall with anintegrated cable concealment shroud forhiding splitters and RF feed-line cabling frompublic view.


21R

AD

IO &

AN

TEN

NA

SH

RO

UD


24X3 Radio Shroud

The 24X3 Radio Shroud is designed to enclose a Nokia small cell radio and either a UE Relay or 2 Fastback microwave radios. The shroud is RF transparent to MW frequencies and clamshells around an existing light pole for easier installationand maintenance.

Holster Side Arm Shroud

ConcealFab’s Holster Side Arm Shroud is designed to contain up to four low-powered radios, diplexers, and all associated cables. The shroud also includes mounting provisions for an Omni serving antenna. The Holster Side Arm Shroud can accommodate a Smart Meter, if necessary. The shroud can attach to wood or steel poles using through bolts or steel band clamps. This shroud is available in various paint colors.

WWW.CONCEALFAB.COM


22

RA

DIO

& A

NTE

NN

A S

HR

OU

DS

14’’ and 18’’ Diameter Pole Top Shrouds

ConcealFab’s 14’’ and 18’’ Pole Top Shrouds are designedto enclose the radio and antenna equipment of a site. Anantenna, radio(s), and power disconnect panel can also be located within the same shroud. Placing the radio equipment close to the antenna reduces cable losses for lower-powered radios. The shroud includes a stainless steel internal structurewith an eccentric mounting pipe to provide maximum volumefor mounting radio equipment below the serving antenna.Radio equipment is kept cool by perforated vents. Mountingprovisions include legs to attach to existing wood/steel polesor custom flanges to fit replacement poles. The shroud legs aredesigned to attach to poles between 4” and 14” in diameter.

Replacement Light Standards

When an existing pole is unable to support the added load of wireless equipment, ConcealFab’s Replacement Light Standards are a perfect solution. These aesthetically pleasing designs incorporate convenient mounting for small cell / oDAS antennas and external radio shrouds. Structural accommodations can also be made for road signs, pedestrian crosswalk signs and banners.

ConcealFab’s Replacement Light Standards can be designed to accommodate various quasi-omni antennas. The poles can be produced in a variety of shapes and sizes and outfitted with luminaires, as required, to match existing infrastructure. ConcealFab’s Replacement Light Standards are hot dip galvanized for environmental protection and can be painted to meet jurisdictional aesthetic requirements.

Heavy duty replacement poles are also available to support panel antenna shrouds. Paired with one of ConcealFab’s Single Mast or Tri-Mast Antenna Shrouds, this system provides maximum flexibility to optimize RF performance. With RF feed-line cables and antennas hidden from public view, these systems often gain quick approval in urban / suburban environments.


23R

AD

IO &

AN

TEN

NA

SH

RO

UD


WWW.CONCEALFAB.COM


24

RA

DIO

& A

NTE

NN

A S

HR

OU

DS

Classic light design. Typically used in residential areas and for area lighting with cobra light heads. Typically made of aluminum or steel.

Typically used in parking lots. Typically made of aluminum or steel.

Typically used in residential and downtown areas. Typically made of aluminum or steel.

Typically used in residential and downtown areas. Typically made of aluminum or steel.

These poles are decorative street lights. Typically usedin historically sensitive Main Street USA areas.Typically made of aluminum or steel. Also made usingwrought iron in historic areas.

These poles are decorative street lights. Typically used in historic and affluent areas. Also used near oceans due to environmental considerations.

LIGHT STANDARD TYPES

Smooth, tapered

Square section

Hexagonal, tapered

Octagonal, tapered

Fluted, tapered

Spun Concrete

INTE

GR

ATED

RA

DIO

PO

LES

INTEGRATEDRADIO POLESOverview

ConcealFab’s line of Integrated Radio Poles combine all the equipment required at small cell / oDAS nodes

into a single, aesthetically-pleasing design. Antennas, RF cabling, radios, power meter, power disconnect

and even battery back-up can be incorporated inside a single structure providing wireless coverage and

capacity with the lowest possible visual impact on the community. ConcealFab works directly with the

major radio equipment OEMs to verify that appropriate air flow is provided to cool the electronics inside

the pole. In addition, our solutions incorporate patented noise suppression technology to reduce fan noise,

when required, for quiet operation in neighborhood environments.

Key Features:

• Antenna + radio equipment housed in single structure

• Eliminates need for separate radio cabinet

• Small footprint on sidewalk

• Lowest possible visual impact

• Radio (s)• Antenna & Plumbing

Equipment• Power Equipment• Fiber Equipment

25

DefineEquipment BOM

Choose Enclosure Form Factor

• Luminaire• Luminaire Arm• Banners• Decorative Base

DefineAttachments

• See Selection Matrix (Page 27 & 28)


WWW.CONCEALFAB.COM

INTEGRATEDRADIO POLES

INTE

GR

ATED

RA

DIO

PO

LES

Integrated pedestal Integrated base Integrated monopole

Antenna RAD ctr. elev.

Luminaire mounting elev.

Finish grade = 0 FT

Luminairemodel / Qty.

Radio model / Qty.

Antenna model

Combiner model / Qty.

Size / Qty. RF cables

Meter / disconnect model

Meter elev.(if required)

26

• Galvanized• Customer Defined Color

Define Color

• Approval Drawing• DXF• Photo Simulation• Lead Time

ConcealFab Proposal

SEND TO CONCEALFAB

INTEGRATEDRADIO POLESProduct Selection Matrix

MANUFACTURER/ RADIO MODEL

Medium PowerDual Band Radios

NOKIA

RRH / Corona

Flexi Zone

ERICSSON

RRUS Series

mRRU

220X

cMRO

12” Monopole

MCO, MRO

13” Fluted Monopole 20” Octagonal Pole16” Pole 17” Fluted Pole 24” Pedestal Base 30” Pedestal Base

COMMSCOPE

JMA

ION - M

ION - U

ION - ML

Teko

PRISM

ADRF

ADX-HPR

SOLiD

City DAS

27 CONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDEIN

TEG

RAT

ED R

AD

IO P

OLE

S

WWW.CONCEALFAB.COM


MANUFACTURER/ RADIO MODEL

Medium PowerDual Band Radios

NOKIA

RRH / Corona

Flexi Zone

ERICSSON

RRUS Series

mRRU

220X

cMRO

12” Monopole

MCO, MRO

13” Fluted Monopole 20” Octagonal Pole16” Pole 17” Fluted Pole 24” Pedestal Base 30” Pedestal Base

COMMSCOPE

JMA

ION - M

ION - U

ION - ML

Teko

PRISM

ADRF

ADX-HPR

SOLiD

City DAS

28

INTE

GR

ATED

RA

DIO

PO

LES

INTEGRATEDRADIO POLES12” Integrated Radio Monopole

The most compact of ConcealFab’s line of Integrated RadioPoles, the 12” Integrated Radio Monopole is able to accommodate a variety radio configurations. Theradio compartments within the pole can house Ericsson2203/2205 radios, Nokia cMRO radios, Nokia AirScale Microradios, or Commscope ION-M oDAS radios. Due to the smalldiameter, these poles are typically deployed in a monopoleconfiguration with multiple radio compartments supportingmulti-band / multi-operator deployments in locations thathave demanding zoning requirements.

KEY FEATURES

• Mimics the look of a traditional light standard• Luminaire and luminaire arm can be configured to

match the adjacent poles• Smallest footprint available for low-wattage radios• Minimal RF Cable Losses

29 CONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDEIN

TEG

RAT

ED R

AD

IO P

OLE

S

WWW.CONCEALFAB.COM


13” Fluted Integrated Radio Monopole

KEY FEATURES

• Matches the look of decorative light standards in downtown and historic areas

• Decorative bases are available to match the adjacent poles

• Luminaire and luminaire arm can be configured to match the adjacent poles

ConcealFab’s 13” Fluted Integrated Radio Monopole includesa fluted profile to better match the more decorative andornate light poles often found in city environments. Theradio compartments within the pole can house Ericsson2203/2205 radios, Nokia cMRO radios, Nokia AirScale Microradios, or Commscope ION-M oDAS radios. These poles aretypically supplied as a single-piece monopole with multipleradio compartments per pole. Decorative clamshell basesare available to conceal the anchor bolts and match existingpoles in the area.

30

INTE

GR

ATED

RA

DIO

PO

LES

16” Smooth Integrated Radio Pole

ConcealFab’s 16” Integrated Radio Pole providesa smooth profile system able to accommodate dualband small cell radios as well as the larger oDAS radios suchas JMA / Teko and Commscope ION-ML. This system can bedeployed as a continuous diameter monopole but is morefrequently deployed as an integrated base with smallerdiameter extension pole. Additional radio compartmentsare typically incorporated to support MIMO operation inmultiple frequency bands.

KEY FEATURES

• Can be configured as a multi-tenant structure• Multiple radio bays for band flexibility• 16’’ profile can stop after radio compartment or

continue for the entire pole



INTE

GR

ATED

RA

DIO

PO

LES

WWW.CONCEALFAB.COM

17’’ Fluted Integrated Radio Monopole

KEY FEATURES

• Can be deployed as a multi-tenant structure• Matches the look of decorative light standards in

downtown and historic areas• Decorative bases are available to match the adjacent

poles• Luminaire and luminaire arm can be configured to

match the adjacent poles

ConcealFab’s 17” Integrated Radio Pole providesa fluted profile able to accommodate larger oDAS radiossuch as JMA / Teko and Commscope ION-ML. A flutedprofile is often required to more closely match themore decorative and ornate light poles often found incity environments. This system can be deployed as acontinuous diameter monopole but is more frequentlydeployed as an integrated base with smaller diameterextension pole. Decorative clamshell bases are availableto conceal the anchor bolts and match existing poles inthe area.

32


INTE

GR

ATED

RA

DIO

PO

LES

20’’ Octagonal Integrated Radio Monopole

ConcealFab’s 20” Octagonal Integrated Radio Pole

can accommodate the larger, high-power RRUS radios

from Ericsson or RRH radios from Nokia, as well as, multiple

modular oDAS radios from Solid, ADRF and Commscope (PRISM).

The octagonal pole can be supplied with an optional power

section below the radios to enclose a rectifier and back-up

batteries. The octagonal is always deployed in the integrated

base configuration with a smaller diameter extension pole

supporting the antenna and any required light arms.

KEY FEATURES

• Most Flexible Equipment Platform• Capable of being deployed as a multi-tenant structure• Able to house traditional macro radios• Luminaire and luminaire arm can be configured to

match the adjacent poles



INTE

GR

ATED

RA

DIO

PO

LES

WWW.CONCEALFAB.COM

24’’ and 30’’ Pedestal Bases

KEY FEATURES

• 24’’ and 30’’ footprint sizes to match equipment configuration

• Various heights to match equipment configuration• Can be deployed as a base or a ground furniture

cabinet• Flexible mounting platform for multiple radios• All sides are removable for easier installation and

maintenance

ConcealFab’s Pedestal Bases are a highly flexible alternative for deploying a variety of oDAS and small cell radios in urban environments. The vented square base can accommodate multiple small cell and oDAS radios with only minor changes to mounting hardware. As radio requirements change, this system can be easily modified to accommodate new deployment needs. Large, removable side access panels provide maximum access to internal equipment during initial installation and service.

34


INTE

GR

ATED

RA

DIO

PO

LES

VEN

UE

CON

CEA

LMEN

TS

VENUE CONCEALMENTS

35

Concealing antennas in stadiums, airports, hotels, and other public venues is often difficult. ConcealFab has

developed a full line of antenna concealments for both outdoor and indoor venues. Custom enclosures that

match a particular venue are available to house specific cellular and WiFi antennas. Custom graphics can

be applied to any of our Venue Concealment products.

ConcealFab also has experience deploying antenna concealments and Integrated Radio Poles in the parking

lots or parking garages that surround the venue.

Overview


Panel Wall Mount (38)

Stadium Vomitory (36)

Panel Antenna Sign Concealment (38)

Ballasted RooftopMount and Shroud (39)

Hardened StadiumEricsson DOT (37)

WWW.CONCEALFAB.COM

VENUE CONCEALMENTS

VEN

UE

CON

CEA

LMEN

TS

36

Stadium / Venue Concealments

Stadiums present an interesting capacity challenge for mobile operators. Even small college university stadiums can seat more than 40,000 fans on game day. Larger stadiums can seat more than 100,000 fans. Designing and optimizing a DAS network that can meet peak data demand while remaining largely out of site is a significant challenge.

ConcealFab has experience deploying custom concealments for venues of all sizes. Our concealments are PIM free by design and often include custom antenna mounting brackets to achieve the required azimuth and elevation adjustability. Our concealments are structurally rated, including welded steel frames covered by RF transparent materials. Concealments can be painted to match the venue color or covered with vinyl graphic signage with team logos and seating section identification.

VENUE CONCEALMENTS37

Hardened Radio DOT

ConcealFab’s Hardened Radio DOT is designed to mount under existing seats in stadium settings. The Hardened DOT is sealed to protect the radio from both water intrusion and impact damage. The Hardened DOT can also be deployed in parking garages or other outdoor areas.

Aesthetics• Ultra Compact to Fit Anywhere

• Minimal Visual Impact to Not Disrupt Aesthetics

Ease of deployment• Simplified In-Building System for Minimal Business

Disruption

• Radio Connection and Power over CAT Cable

• Small Equipment Room Footprint

• Streamlined O&M

High performance• High Data Rates (MIMO) and Fast Access

• Capacity as Well as Coverage

• Dynamic Capacity Allocation

CONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDEVE

NU

E CO

NC

EALM

ENTS

WWW.CONCEALFAB.COM


Panel Antenna Wall Mount

ConcealFab’s panel antenna wall mounting system is designed to mount small cell panel antennas as flush as possible to a building surface. The kit includes a universal mounting frame with custom interface brackets to attach the specific antenna model to the frame. A cable concealment shroud is provided to hide RF feed-line cabling from public view.

Panel Antenna Sign Concealment

ConcealFab’s panel antenna sign concealments provide customers the ability to deploy one or more small cell panel antennas on the side of a building inside an RF transparent enclosure. Sign concealments are custom produced to the required geometry and mounting orientation with printed vinyl signage decals applied to the outside surfaces. Panel antenna sign concealments blend into the environment, hiding the panel antennas and RF feed-line cabling from public view. Please contact ConcealFab customer service for additional information.

VEN

UE

CON

CEA

LMEN

TS

VENUE CONCEALMENTS39 CONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDE

Ballasted Rooftop Mount

PN - 007963-H-M-F (Mount)

4.6 FT – Optimized for 6 FT vent6.6 FT – Optimized for 8 FT vent10 FT – Field trim to desired height

H = Mast Height

123

PN-PPPPPP-H-F (Vent Concealment)

HEAVY DUTY

ConcealFab’s ballasted rooftop mount allows small cell antennas to be discreetly deployed on existing rooftops without penetrating the roof membrane. Up to three optional radio mounting masts can attach to each mount. An adjustable version for sloped rooftops is available. Please contact ConcealFab customer service for additional information. Order sleeve and vent concealment separately.

An optional RF-transparent vent concealment is available to hide the antenna and RF feed-line cables from public view. This concealment is secured to the 2-inch nominal (2.375-inch OD) mounting mast, allowing it to be deployed on any vertical pipe of sufficient length. The optimized mast pipe lengths referenced in the Ballasted Rooftop Mount section place the bottom of the concealment 2 FT above the rooftop.

None1 Radio Mast2 Radio Masts3 Radio Masts

M = # of Radio Masts

0123

6’8’

H = Height of Concealment

12

BrownSilver

F = Finish Code

24

F = Finish Code

24

BrownSilver

16 inch diameter, segmented profile16 inch diameter, smooth profile18 inch diameter, segmented profile18 inch diameter, smooth profile


007964008195008002008196

VEN

UE

CON

CEA

LMEN

TS

WWW.CONCEALFAB.COM


Lightenna™ Concealment

ConcealFab’s Lightenna™ concealment is an ideal solution for locations with stringent architectural requirements. Each concealment encloses an existing small cell cantenna behind an RF transparent, frosted plastic shroud. Two LED illumination rings, tested to verify low PIM performance, are available to provide decorative lighting. Multiple Lightenna™ concealments can be mounted to the side of a building or to the sides of a pole to support multi-operator or multi-band deployments. Please contact ConcealFab customer service for additional information.

VEN

UE

CON

CEA

LMEN

TS

TEST

& M

EASU

REM

ENT

CAPA

BIL

ITIE

S

TEST & MEASUREMENT CAPABILITIES


Overview

Antenna concealments and antenna mounting solutions are an integral part of the wireless network. If designed incorrectly, these products can negatively impact system performance by introducing unwanted losses or by generating high levels of interference. Using “best practices” to design products placed near or in front of an antenna is a good start but the only way to know for sure that a product meets requirements is to perform a test. ConcealFab has made and continues to invest in the RF test capability required to verify product performance.

Passive Intermodulation (PIM) Testing

Passive intermodulation (PIM) is noise generated by the transmit signals at a cell site when they interact with non-linear objects in the RF path. Metal objects close to the antenna, such as mounting kits, can generate high levels of PIM if not designed correctly. ConcealFab owns PIM test equipment and has developed test methods to verify that its products will not generate excessive PIM when exposed to high RF radiation.PIM test capability:

• 700 MHz• 850 MHz• 1900 MHz• Low PIM anechoic test chamber

ConcealFab actively participates in the IEC working group responsible for maintaining the international PIM test specification (IEC 62037). ConcealFab is working with the IEC to formalize and publish the test methods developed in house for measuring the radiated PIM performance of objects placed near antennas. For additional information, please contact ConcealFab customer service.

WWW.CONCEALFAB.COM

TEST & MEASUREMENTCAPABILITIES

TEST

& M

EASU

REM

ENT

CAPA

BIL

ITIE

S

42

Transmission Loss Testing

Any material placed in front of an antenna will have some impact on site performance. If not designed correctly, antenna shrouds can create high path loss resulting in poorer coverage and slower data rates.

Material properties such as dielectric constant and loss tangent are important considerations for minimizing loss, as is the shape and thickness of the material. These geometric aspects of the shroud design become increasingly important at frequencies above 5 GHz where the thickness of the material is a larger percentage of a wavelength.

Relying on material datasheet parameters or extrapolating historical data collected at lower frequencies does not adequately predict how a shroud will perform at new 5G frequencies. The only way to know for sure is to perform a test.

ConcealFab has the technical expertise and has made the capital investments required to accurately test shroud materials up to 40 GHz. With this capability, Mobile operators can be confident that ConcealFab shrouds are “5G ready” and able to support next generation wireless networks.

43

CANADA

Precision Marking represents ConcealFab in the states indicated. Their knowledge of RF products in general and our products specifically, coupled with their Carrier and non-carrier relationships creates a powerful local support team for ConcealFab. For international inquiries and for inquiries outside of Precision Marketing’s area of representation, please contact ConcealFab directly.

Sales Contact Information

ConcealFab CorporationAK, AZ, CA, CO, HI, ID, MT, NM, NV, OK, OR, TX, UT,WA, WY

ConcealFab Corporation Contact:[email protected]+ 1 719 599 3400

SALES CONTACTCONCEALFAB CORPORATION I COMMERCIAL PRODUCT GUIDE

Precision Marketing Inc.AL, AR, CT, FL, DC, DE, GA, IA, IL, IN, KY, KS, LA, MA, MI, MD, ME, MN, MO, MS, NH, ND, NE, NJ, NC, NY, OH, PA, SC, SD, TN, RI, VA, VT, WI, WV

Precision Marketing Contact:[email protected]+ 1 954 752 1700

WWW.CONCEALFAB.COM 44

Black Brown Silver Concrete

PAINT & COLOR SWATCHES

NOTES

Gray

+1 719 599 [email protected]

10205 FEDERAL DRIVE, BUILDING BCOLORADO SPRINGS, CO 80908

january 2018 - concealfab,...

Documents